709296001003006

POKE-HOME: SINGLE HORIZONTAL CONTACT 12-28 AWG: 70-9296 General Information The widespread market adaptation of the KYOCERA AVX STRIPT™ contact systems continue to drive new product developments. The 70-9296 series of dual beam, boxed contacts provide a simple, yet reliable wire-to-board alternative to full sized 1pc and 2pc connector solutions. Contacts are SMT onto the PCB, then either solid or stranded wires can be stripped to length and inserted into the contact. Contacts are designed with dual beam high force contacts to maximize wire retention. Integral wire guides and stop assures proper positioning of the wire. In this round of product expansion, the 2.5mm has been added to offer a new size when trying to maximize AWG and keep the smallest profile contact available is size critical applications. Additionally, this contact has been designed without a wire stop to facilitate solid pin insertion capabilities for board-to-board and module-to-module applications (see BTB Jumper data sheet for 109296001xxx906). APPLICATIONS FEATURES AND BENEFITS • • • • • • Dual Beam box contact provides maximum mechanical stability and wire retention • Tape and reel packaged for automated SMT placement • Staged current rating based on AWG, maximum is 10A (12AWG) • 2.5mm w/o wire stop allows for variable PCB mating tolerances in linear BTB applications Industrial/Ruggedized Wire-to-Board applications Replace hard soldering of wire to a PCB Reference Product Specification 201-01-143 Reference Application Notes 201-01-150 Linear Board-to-Board capabilities with 109296001xxx906 jumpers ELECTRICAL ENVIRONMENTAL MECHANICAL • Voltage Rating: 300V Based on placement distance • Current Rating: See Matrix Below • Operating Temperature: -40ºC to +125ºC • Contact Material: Phosphor Bronze • Contact Plating: Pure Tin • Durability 5 Cycles HOW TO ORDER 70 9296 001 0XX Prefix Series Number of Ways 001= 1 Wire Gauge Size 70 = Contact Code Contact Size 017 1.7mm Contact 002 2mm Contact 025 2.5mm Contact 003 3mm Contact 004 4mm Contact 12AWG 20A 14AWG 16A 0X6 Wire Gauge 22-26 AWG Solid or Stranded 22-28 AWG Solid or Stranded 18-26 AWG Solid or Standed 18-26 AWG Solid or Stranded 12-20 AWG Solid or Stranded Plating & Other Options Max Insulation 1.3mm Ø (See page 85) 1.5mm Ø (See page 85) Max 2mm Ø (See page 85) UL Approved E90723 Yes Code 006 016* Wire Stop Variations With wire stop Without wire stop Plating Pure tin all over *2mm, 2.5mm, and 3mm contact only Yes Yes 2.5mm Ø Yes 3.4mm Ø Yes CURRENT RATING Size 4mm 3mm 2.5mm 2mm 1.7mm 88 Part Number 709296001004006 7092960010030x6 7092960010250x6 709296001002006 709296001017006 16AWG 14A 18AWG 12A 15A 14A 20AWG 10A 14A 12A 22AWG 24AWG 26AWG 28AWG 10A 11A 11A 11A 9A 9A 9A 9A 7A 7A 7A 7A 6A 6A The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – POKE-HOME: SINGLE HORIZONTAL CONTACT 12-28 AWG: 70-9296 1.7mm 70-9296-001-017-006 1.7MM POKE HOME CONTACT NOTES: 1. FOR FURTHER INFORMATION REFER TO ELCO SPECIFICATION 201-01-143 AND APPLICATION NOTES 201-01-150. 2. MATERIAL: TIN PLATED PHOSPHOR BRONZE. 3. PACKING IN TAPE AND REEL, 4000 PIECES PER REEL. 4. FOR WIRE TRIM DETAILS REFER TO PAGE 91. 5. AREA AVAILABLE FOR PICK AND PLACE. 6. UL REFERENCE 90723. 7. GENERAL TOLERANCE ±0.10. SUGGESTED PCB LAYOUT PACKING DETAILS UNREELING DIRECTION The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 89 POKE-HOME: SINGLE HORIZONTAL CONTACT 12-28 AWG: 70-9296 2mm 70-9296-001-002-006 2MM POKE HOME CONTACT UNREELING DIRECTION CONTACT OUTLINE 90 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – POKE-HOME: SINGLE HORIZONTAL CONTACT 12-28 AWG: 70-9296 2.5mm 70-9296-001-025-006 2.5MM POKE HOME CONTACT NOTES: 1. FOR FURTHER INFORMATION REFER TO ELCO SPECIFICATION 201-01-143 AND APPLICATION NOTES 201-01-150. 2. MATERIAL: TIN PLATED PHOSPHOR BRONZE. 3. PACKING IN TAPE AND REEL, 2500 PIECES PER REEL. 4. FOR WIRE TRIM DETAILS REFER TO PAGE 91. 5. AREA AVAILABLE FOR PICK AND PLACE. 6. UL REFERENCE 90723. 7. GENERAL TOLERANCE ±0.10. SUGGESTED PCB LAYOUT PACKING DETAILS The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 91 POKE-HOME: SINGLE HORIZONTAL CONTACT 12-28 AWG: 70-9296 2.5mm – No Stop 70-9296-001-025-016 2.5MM POKE HOME CONTACT – NO STOP NOTES: 1. FOR FURTHER INFORMATION REFER TO ELCO SPECIFICATION 201-01-143 AND APPLICATION NOTES 201-01-150. 2. MATERIAL: TIN PLATED PHOSPHOR BRONZE. 3. PACKING IN TAPE AND REEL, 2500 PIECES PER REEL. 4. FOR WIRE TRIM DETAILS REFER TO PAGE 91. 5. AREA AVAILABLE FOR PICK AND PLACE. 6. UL REFERENCE 90723. 7. GENERAL TOLERANCE ±0.10. SUGGESTED PCB LAYOUT PACKING DETAILS 92 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – POKE-HOME: SINGLE HORIZONTAL CONTACT 12-28 AWG: 70-9296 3mm 70-9296-001-003-006 3MM POKE HOME CONTACT NOTES: 1. FOR FURTHER INFORMATION REFER TO ELCO SPECIFICATION 201-01-143 AND APPLICATION NOTES 201-01-150. 2. MATERIAL: TIN PLATED PHOSPHOR BRONZE. 3. PACKING IN TAPE AND REEL, 2500 PIECES PER REEL. 4. FOR WIRE TRIM DETAILS REFER TO PAGE 91. 5. AREA AVAILABLE FOR PICK AND PLACE. 6. UL REFERENCE 90723. 7. GENERAL TOLERANCE ±0.10. SUGGESTED PCB LAYOUT PACKING DETAILS The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 93 POKE-HOME: SINGLE HORIZONTAL CONTACT 12-28 AWG: 70-9296 4mm 70-9296-001-004-006 4MM POKE HOME CONTACT NOTES: 1. FOR FURTHER INFORMATION REFER TO ELCO SPECIFICATION 201-01-143 AND APPLICATION NOTES 201-01-150. 2. MATERIAL: TIN PLATED PHOSPHOR BRONZE. 3. PACKING IN TAPE AND REEL, 2000 PIECES PER REEL. 4. FOR WIRE TRIM DETAILS REFER TO PAGE 91. 5. AREA AVAILABLE FOR PICK AND PLACE. 6. UL REFERENCE 90723. 7. GENERAL TOLERANCE ±0.10. SUGGESTED PCB LAYOUT PACKING DETAILS 94 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – POKE-HOME: SINGLE HORIZONTAL CONTACT 12-28 AWG: 70-9296 Connector Assembly / Contact Opening Tool CONNECTOR ASSEMBLY FOR FULL DETAILS REFER TO APPLICATION NOTES 201-01-150 CONTACT 70-9296-001-004-006 70-9296-001-004-006 70-9296-001-003-006 70-9296-001-025-006 70-9296-001-025-006 70-9296-001-025-016 70-9296-001-025-016 70-9296-001-002-006 70-9296-001-002-006 70-9296-001-017-006 70-9296-001-017-006 WIRE SIZE 12AWG and 14AWG 16AWG, 18AWG and 20AWG 18AWG to 26AWG 20AWG to 26AWG 20AWG to 26AWG 20AWG to 26AWG 20AWG to 26AWG 22AWG to 28AWG 22AWG to 28AWG 22AWG to 26AWG 22AWG to 26AWG INSULATOR DIAMETER Max 3.4mm Max 2.5mm Max 2.5mm Max 2.0mm 2.0mm to 2.50mm Max 2.0mm Max 2.0mm Max 1.5mm 1.5mm to 2.0mm Max 1.3mm 1.3mm to 1.7mm TRIM LENGTH 6.5 ± 0.5mm 5.5 ± 0.5mm 4.5 ± 0.5mm 3.5 ± 0.5mm 6.0 ± 0.5mm* 3.0mm Minimum – No Stop on Contact 5.5mm Minimum – No Stop on Contact 3.5 ± 0.5mm 5.5 ± 0.5mm* 4.0 ± 0.5mm 6.0 ± 0.5mm* * Wire insulation butts on end of contact CONTACT OPENING TOOL 06-9296-7001-01-000 TOOL TO OPEN THE CONTACT TO INSERT/WITHDRAW WIRE. REFER TO APPLICATION NOTES 201-01-150. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090721 – wire-to-board connectors – 95