9341900117

Rotary knob switches Serie 417 Type 417 Basic design: width 19.4 mm, operation by screwdriver Technical data Switch resistance initial value ≤ 25 mΩ Capacity between two contacts ≤3pF Switch resistance after 15 000 cycles ≤ 50 mΩ Switching mode Non shorting (white bottom plate), shorting (black bottom plate) Insulation resistance 1 x 109 Ω Number of wafers 1 / single wafer Test voltage 1 kV- / 1 kV DC Indexing angle 30° Switching voltage Max. 150 V DC / AC Stops Fixed or without stop Switching current Max. 130 mA, Ag plated Operating torque 2 - 4.5 Ncm Switching power Max. 5 VA, Ag plated Solder terminals For printed circuit Steady current at 20 °C ambient temperature 3A Contact material Silver plated copper alloy Operating life at maximum power ≥ 15 000 cycles Insulation material Plastic Operating life no load ≥ 20 000 cycles Switching combinations (see page 2) 1 x 2 to 1 x 12; 2 x 2 to 2 x 6; 3 x 2 to 3 x 4; 4 x 2 to 4 x 3; 6x2 General Note This datasheet does not give any information on product availability. The information given is just meant to describe the product and is not to be considered as guaranteed characteristics in the legal sense. All products are subject to design changes in the i nterest of further technical development. Copyright: KYOCERA AVX Components (Werne) GmbH (GER) www.kyocera-avx.com 10/2021 Page 1 / 2 Rotary knob switches Serie 417 Type 417 Basic design: width 19.4 mm, operation by screwdriver Switching Combinations General Note This datasheet does not give any information on product availability. The information given is just meant to describe the product and is not to be considered as guaranteed characteristics in the legal sense. All products are subject to design changes in the i nterest of further technical development. Copyright: KYOCERA AVX Components (Werne) GmbH (GER) www.kyocera-avx.com 10/2021 Page 2 / 2