APD0609470M050R

SMD Aluminum Conductive Polymer Electrolytic Capacitors APD Series FEATURES • Endurance: 2000 hours at 105°C • High Voltage • RoHS compliant LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Lamps • LED • Power Supply HOW TO ORDER PD A 0606 680 035 M R Special No Code = std Product Type Aluminum Chip Capacitors Packaging R = Pure Tin 15" Reel Series Type Case Size Rated DC Voltage 035 = 35Vdc 050 = 50Vdc 063 = 63Vdc See table below Capacitance Code µF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = ±20% CASE DIMENSIONS millimeters (inches) Code D±0.50 (0.020) L±0.50 (0.020) W±0.20 (0.008) H±0.20 (0.008) C±0.20 (0.008) R P±0.30 (0.012) V max Typical Weight (g) 0606 6.30 (0.248) 6.00 (0.236) 6.60 (0.260) 6.60 (0.260) 7.30 (0.287) 0.50 - 0.80 (0.020 - 0.031) 2.00 (0.080) 0.30 (0.012) 0.27 0609 6.30 (0.248) 9.30 (0.366) 6.60 (0.260) 6.60 (0.260) 7.30 (0.287) 0.50 - 0.80 (0.020 - 0.031) 2.00 (0.080) 0.30 (0.012) 0.39 0809 8.00 (0.315) 9.50 (0.374) 8.30 (0.327) 8.30 (0.327) 9.00 (0.354) 0.70 - 1.10 (0.028 - 0.043) 3.20 (0.126) 0.30 (0.012) 0.61 0811 8.00 (0.315) 11.50 (0.453) 8.30 (0.327) 8.30 (0.327) 9.00 (0.354) 0.70 - 1.10 (0.028 - 0.043) 3.20 (0.126) 0.30 (0.012) 0.75 1012 10.00 (0.394) 12.50 (0.492) 10.30 (0.406) 10.30 (0.406) 11.00 (0.433) 0.70 - 1.30 (0.028 - 0.051) 4.50 (0.177) 0.30 (0.012) 1.32 MARKING D-PN Code + XXX-ID Code KYOCERA AVX Logo DXXX 680 035 Polarity Band Cathode - Capacitance (Code as in p/n) Voltage (Code as in p/n) TECHNICAL SPECIFICATIONS Category Temperature Range: -55ºC to +105°C Capacitance Range At 25°C,120Hz 22μF to 470μF Capacitance Tolerance: At 25°C,120Hz ±20% Dissipation Factor (%) Leakage Current: Measurement Frequency: 120Hz at 25°C Please see the ratings and part number reference table below After 2 minutes at rated working voltage at 25°C* I ≦ 0.2CV or 500μA, whichever is greater * Note: In the case of an anomalous reading, re-measure the leakage current after following voltage treatment: Voltage treatment: DC rated voltage to be applied to the capacitors for 120 minutes at 105°C. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-ALUM-0006 | Rev 3 – aluminum capacitors – 39 SMD Aluminum Conductive Polymer Electrolytic Capacitors APD Series CAPACITANCE AND RATED VOLTAGE RANGE (FIGURES DENOTES CASE SIZE) Capacitance Rated Voltage DC (VR) µF Code 35V 50V 63V 22 220 0606 0606 0606 27 270 0606 33 330 0606 0606 0609 47 470 0606, 0609 0609 0809 0606, 0609 0811 0609, 0809, 0811 0809, 0811, 1012 56 560 68 680 0811 82 820 100 101 0811, 1012 120 121 150 151 0811 1012 220 221 0811 1012 270 271 0811, 1012 330 331 1012 470 471 1012 1012 0811 Released ratings RATINGS & PART NUMBER REFERENCE Part No. Case Size Capacitance (µF) Rated Voltage (V) APD0606220M035R APD0606270M035R APD0606330M035R APD0606470M035R APD0609470M035R APD0606680M035R APD0609680M035R APD0609101M035R APD0809101M035R APD0811101M035R APD0811151M035R APD0811221M035R APD0811271M035R APD1012271M035R APD1012331M035R APD1012471M035R 0606 0606 0606 0606 0609 0606 0609 0609 0809 0811 0811 0811 0811 1012 1012 1012 22 27 33 47 47 68 68 100 100 100 150 220 270 270 330 470 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 APD0606220M050R APD0606330M050R APD0609470M050R APD0811680M050R APD0811820M050R APD1012820M050R APD0809101M050R APD0811101M050R APD1012101M050R APD0811121M050R APD1012151M050R APD1012221M050R 0606 0606 0609 0811 0811 1012 0809 0811 1012 0811 1012 1012 22 33 47 68 82 82 100 100 100 120 150 220 50 50 50 50 50 50 50 50 50 50 50 50 APD0606220M063R APD0609330M063R APD0809470M063R APD0811560M063R APD1012101M063R 0606 0609 0809 0811 1012 22 33 47 56 100 63 63 63 63 63 DCL Max. (µA) DF Max. (%) ESR Max. @100kHz (mΩ) 100kHz RMS Current (mA)/105°C 500 500 500 500 500 500 500 700 700 700 1050 1540 1890 1890 2310 3290 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 54 54 54 40 45 40 36 36 36 27 27 27 27 27 27 27 1100 1100 1100 1100 1500 1100 1800 2200 2900 3100 3100 2500 2600 2800 2800 3100 500 500 500 680 820 820 1000 1000 1000 1200 1500 2200 12 12 12 12 12 12 12 12 12 12 12 12 72 72 54 27 27 27 54 27 27 27 27 27 840 890 1400 2100 2100 2100 1500 2100 2200 2100 2200 2400 500 500 592 706 1260 12 12 12 12 12 72 54 54 36 36 520 520 1000 1000 1600 35 Volt 50 Volt 63 Volt All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 2 minutes. 40 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-ALUM-0006 | Rev 3 – aluminum capacitors – SMD Aluminum Conductive Polymer Electrolytic Capacitors APD Series FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency Coefficient 120Hz ≦ f(Hz) < 1kHz 0.05 1kHz ≦ f(Hz) < 10kHz 10kHz ≦ f(Hz) < 100kHz 0.30 0.70 100kHz ≦ f(Hz) < 500kHz 1.00 QUALIFICATION TABLE APD series (Temperature Range -55ºC to +105ºC) Test Condition Characteristics Visual examination Endurance The following specifications shall be satisfied when ΔC/C the capacitors are restored to 20°C after the rated DF voltage is applied for 2000 hours at 105°C. ESR DCL Visual examination Damp Heat (Steady State) Surge Voltage The following specifications shall be satisfied when ΔC/C the capacitors are restored to 20°C after subjection DF them to store at 60°C, 90 to 95% RH for 2000 hours, ESR without DC applied. DCL The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages specified at normal temperature for 30 seconds. Through a protective resistor (R = 1kΩ) and discharge for 5 minutes 30 seconds. Visual examination ΔC/C DF ESR DCL no visible damage ≦ ±20% of the initial limit ≦ 150% of the initial specified limit ≦ 150% of the initial specified limit ≦ Initial specified limit no visible damage ≦ ±20% of the initial limit ≦ 150% of the initial specified limit ≦ 150% of the initial specified limit ≦ Initial specified limit no visible damage ≦ ±20% of the initial limit ≦ 150% of the initial specified limit ≦ 150% of the initial specified limit ≦ Initial specified limit REFLOW Peak Temperature Preheat Temperature Duration at 200°C or higher 260°C, 10 sec. max 150°C to 180°C, 90 sec. max. 60 sec. max. Duration at 230°C or higher 40 sec. max. Reflow Number Twice or less STORAGE 1. It is recommended to keep capacitors between the ambient temperatures of 5°C to 35°C (If between 35 to 85°C, it should be less than three months), and the relative humidity of 75% or below. 2. Confirm that the environment does not have any of the following conditions: • Damp conditions such as water, saltwater spray, or oil spray or fumes. High humidity or humidity condensation situations. • In an atmosphere filled with toxic gases (such as hydrogen sulfide, sulfurous acid, nitrous acid, chlorine, ammonia, etc.). • Being exposed to direct sunlight, ozone, ultraviolet ray, or radiation. • Being exposed to acidic or alkaline solutions. • Under severe conditions where vibration and / or mechanical shock exceed the applicable ranges of the specification. 3. Storage time: • Before unseal: within 1 year after delivery • After seal: within 1 month from opening The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-ALUM-0006 | Rev 3 – aluminum capacitors – 41 SMD Aluminum Conductive Polymer Electrolytic Capacitors APD Series PACKAGE TAPE DIMENSIONS units (mm) Size Code A±0.20 B±0.20 W±0.30 F±0.10 E±0.10 P±0.10 t±0.10 0606 7.0 7.0 16.0 7.5 1.75 12.0 0.4 T±0.20 8.0 0609 7.0 7.0 16.0 7.5 1.75 12.0 0.4 10.0 0809 8.7 8.7 24.0 11.5 1.75 16.0 0.4 10.5 0811 8.7 8.7 24.0 11.5 1.75 16.0 0.4 12.0 1012 10.7 10.7 24.0 11.5 1.75 16.0 0.4 13.0- 13.5 POLARITY REEL DIMENSIONS units (mm) Size Code W1±1.00 W2±1.00 Qty./Reel 0606 18.0 22.0 1000 0609 18.0 22.0 800 0809 26.0 30.0 600 0811 26.0 31.0 500 1012 26.0 31.0 500 RECOMMENDED LAND PATTERN DIMENSION OF PCB Size Code A (mm) B (mm) C (mm) 0606 1.9 3.5 1.6 0609 1.9 3.5 1.6 0809 3.1 4.2 2.2 42 0811 3.1 4.2 2.2 1012 4.5 4.4 2.2 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-ALUM-0006 | Rev 3 – aluminum capacitors –