CB SERIES: PPS DIELECTRIC – LEAD FREE VERSION
General Description
GENERAL DESCRIPTION
Film chip capacitor using a naked and stacked construction with
metallized PolyPhenylene Sulfide film (PPS).
ADVANTAGES
• Applicable for both flow and reflow soldering.
• Very constant Capacitance value with temperature.
• Low dielectric absorption.
• The intrinsic elasticity of the dielectric film provides an
excellent compatibility of the capacitor with all types of
material for printed circuit boards.
• Excellent thermal shock resistance.
• Low dissipation factor, ESR and ESL.
• No piezoelectric effect.
APPLICATIONS
General purpose function in low voltage applications:
• Filtering, coupling, decoupling
• Available in tape and reel suitable for automatic placement.
• Non-polar construction.
• Time-constant
• Oscillation timing circuit
Typical applications would be:
• Automotive (navigation system ...)
Outer Layer
• Telecom (GSM PLL circuit, ADSL system ...)
Termination Plating :
100% matte Sn
• Industrial (Lighting and power supplies...)
Ni Barrier Under
Termination
Silver Epoxy
Resin
Brass
Active Layers : PEN dielectric
PERFORMANCE CHARACTERISTICS
Climatic Category
Capacitance Range
Tolerance on CR
Nominal Voltages
Test Voltage
Soldering methods
Tangent of Loss Angle at 1kHz (DF)
Insulation resistance minimum : IR
Temperature range
A.C. applications
55/125/56
1nF to 180nF
±2%, ±5%, ±10%
16Vdc to 50Vdc
1.4Vr 2 sec. at 25°C
IR vapor phase reflow
< 50 x 10-4
for C ≤ 0.33μF IR > 1000 MΩ at 20°C
for 1 min. charge at 10VDC for VR < 100VDC
-55°C to 125°C
for high frequency A.C. application please check with AVX
No self-healing properties
38
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
CB SERIES: PPS DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.001μF
CB018B0102+ --
0.0012
CB018B0122+ --
0.0015
CB018B0152+ --
0.0018
CB018B0182+ --
0.0022
CB018B0222+ --
0.0027
CB018B0272+ --
0.0033
CB018B0332+ --
0.0047
CB018B0472+ --
0.0056
CB018B0562+ --
0.0068
CB018B0682+ --
0.0082
CB018B0822+ --
0.010μF
CB018B0103+ --
0.012
CB018B0123+ --
0.015
CB018B0153+ --
0.018
CB018B0183+ --
0.022
CB018B0223+ --
0.027
CB018B0273+ --
0.033
CB018B0333+ --
0.039
CB018B0393+ --
0.047
CB028B0473+ --
0.056
CB028B0563+ --
0.068
CB028B0683+ --
0.082
CB028B0823+ --
L
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
Chip Dimensions
*Tolerances
(page 6)
W
H max
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.098)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
millimeters (inches)
T
L
VOLTAGE Vdc: 16V Vac: 10V
Tape Dimensions
T
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
W
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
P1
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
K0
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
Reel Dimensions
A
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
W1
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
W2 max
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
For other Values: upon request
Replace the + by the tolerance code: G = 2%, J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– film chip capacitors –
39
CB SERIES: PPS DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
L
Capacitance
Range
(CR)
Ordering
Code
0.100μF
CB028B0104+ --
0.120
CB038B0124+ --
0.150
CB038B0154+ --
0.180
CB038B0184+- -
0.001μF
CB018D0102+ --
0.0012
CB018D0122+ --
0.0015
CB018D0152+ --
0.0018
CB018D0182+ --
0.0022
CB018D0222+ --
0.0027
CB018D0272+ --
0.0033
CB018D0332+ --
0.0047
CB018D0472+ --
0.0056
CB018D0562+ --
0.0068
CB018D0682+ --
0.0082
CB018D0822+ --
0.010μF
CB018D0103+ --
0.012
CB028D0123+ --
0.015
CB028D0153+ --
0.018
CB028D0183+ --
0.022
CB028D0223+ --
VOLTAGE Vdc: 16V Vac: 10V
L
3.30
(0.130)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
Chip Dimensions
*Tolerances
(page 6)
W
H max
2.50
2.10
(0.098) (0.083)
3.20
2.30
(0.126) (0.091)
3.20
2.30
(0.126) (0.091)
3.20
2.30
(0.126) (0.091)
3.20
2.30
(0.126) (0.091)
3.20
2.50
(0.126) (0.098)
3.20
2.50
(0.126) (0.098)
T
0.50
(0.020)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024 )
0.60
(0.024 )
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
2.50
(0.098)
2.50
(0.098)
2.50
(0.098)
2.50
(0.098)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.80
(0.071)
1.80
(0.071)
1.80
(0.071)
1.80
(0.071)
millimeters (inches)
Tape Dimensions
W
8.00
(0.315)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
Reel Dimensions
P1
K0
A
W1
4.00
2.33
180
8.4
(0.158) (0.092) (7.087) (0.331)
8.00
2.60
180
12.4
(0.315) (0.102) (7.087) (0.488)
8.00
2.60
330
12.4
(0.315) (0.102) (12.99) (0.488)
8.00
2.60
180
12.4
(0.315) (0.102) (7.087) (0.488)
8.00
2.60
330
12.4
(0.315) (0.102) (12.99) (0.488)
8.00
2.60
180
12.4
(0.315) (0.102) (7.09) (0.488)
8.00
2.60
330
12.4
(0.315) (0.102) (12.99) (0.488)
VOLTAGE Vdc: 50V Vac: 40V
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.147) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.90
180
8.40
(0.315) (0.158) (0.075) (7.087) (0.331)
8.00
4.00
1.90
180
8.40
(0.315) (0.158) (0.158) (7.087) (0.331)
8.00
4.00
1.90
180
8.40
(0.315) (0.158) (0.075) (7.087) (0.331)
8.00
4.00
1.90
180
8.40
(0.315) (0.158) (0.075) (7.087) (0.331)
W2 max
14.4
(0.567)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
For other Values: upon request
Replace the + by the tolerance code: G = 2%, J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
40
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
2000
2000
BA
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
CB SERIES: PPS DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.027
CB028D0273+ --
0.033
CB028D0333+ --
0.039
CB028D0393+ --
0.047
CB038D0473+ --
0.056
CB038D0563+ --
0.068
CB038D0683+ --
0.082
CB038D0823+ --
0.100μF
CB038D0104+ --
L
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
4.50
(0.1777)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
Chip Dimensions
*Tolerances
(page 6)
W
H max
2.50
2.10
(0.098) (0.083)
2.50
2.10
(0.098) (0.083)
2.50
2.1
(0.098) (0.083)
3.20
2.4
(0.126) (0.095)
3.20
2.4
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
millimeters (inches)
T
L
VOLTAGE Vdc: 50V Vac: 40V
Tape Dimensions
T
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
W
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
2.30
(0.091)
2.30
(0.091)
2.30
(0.091)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
Reel Dimensions
A
180
(7.087)
180
(7.087)
181
(7.087)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
W1
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
W2 max
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
2000
2000
BA
2000
2000
BA
2000
2000
BA
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
For other Values: upon request
Replace the + by the tolerance code: G = 2%, J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
41
CB SERIES: PPS DIELECTRIC – LEAD FREE VERSION
Mounting and Soldering Recommendations
MOUNTING AND SOLDERING RECOMMENDATIONS
SOLDERING PROFILE
The capacitors can be mounted using infrared and vapor phase soldering following recommended below.
They are NOT suitable for wave soldering.
All temperature refer to topside of the package, measured on the package body surface.
TP max
1206 to 1812
3°C / second max
Preheat
- Temperature Min (Ts min)
- Temperature Max (Ts max)
- Time (ts min to ts max)
150°C
200°C
180 sec. max
Time maintained above
- Temperature (TL)
- Time (tL)
Peak temperature (Tp max)
Customer Peak temperature (Tp)
Time within 5°C of peak
temperature (Tp -5ºC)*
Ramp-Down
217°C
60 sec. max
260°C
< 260ºC
Ramp up
TL
TS max
Temperature (ºC)
Profile Feature
Ramp-Up (Ts max to Tp)
tL
TS min
Ramp
down
ts
10 sec.
0
30
60
90
120
150
180
210
240
270
300
330
Time (seconds)
6°C / sec.
# Reflow soldering referring to JEDEC Standard with some limitations
# JEDEC J-Std 020C
* Example : Tp = 238.5°C =>> tp = time between 238.5°C and 233.5°C (Tp-5°C)
RECOMMENDED SOLDER PASTE THICKNESS
For optimum solderability, the recommended soldering paste
thickness: 1206 to 1812 :150 to 200μm
C
B
In case of hand soldering, the temperature of the soldering iron
should not be above 250°C. Special care must be taken to avoid
touching the capacitor body with the iron tip.
PAD DIMENSIONS: MILLIMETERS (INCHES)
Size Code
01
02
03
A
Case Size
1206
1210
1812
A
1.30 (0.051)
2.00 (0.079)
3.00 (0.118)
B
1.30 (0.051)
1.30 (0.051)
1.50 (0.059)
C
2.20 (0.087)
2.20 (0.087)
3.50 (0.137)
RECOMMENDED CLEANING
OTHER CAUTIONS
To clean flux from the PC board assembly, the recommended
products are: ethanol, isopropyl alcohol, and deionized water
wash. The cleaning products to avoid are: Toluene, Xylene,
Trichloroethylene, Terpene Cleaner EC-7, surface active agent. In
case of using another solvent, please contact us.
Flame retardancy: the dielectric film is not a flame retardant
material.
Environment: contact us when chips are used in humid or gas
atmosphere and /or when using resin.
Recommended handling: do not use edged tools, so not to
damage the capacitors.
TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121
42
Stress Type
Ref. Spec.
-55°C +85(+10/-0)°C air
5 to 10 minutes soak 3 cycles/hour
Temperature cycling
JESD22-A104
Test Conditions
Analysis
Results
SEM x 1000
Pass
Ambient Temperature /
Humidity Storage
30+/-2°C - 60+/-3% RH -2000H
SEM x 1000
Pass
High Temperature /
Humidity Storage
70+/-5°C - 93+3/-2% RH -1000H
SEM x 1000
Pass
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
CB SERIES: PPS DIELECTRIC – LEAD FREE VERSION
Electrical Characteristics versus Temperature and Frequency
ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY
ELECTRICAL CHARACTERISTICS
FREQUENCY CHARACTERISTICS
Capacitance
Capacitance
DC/C (%)
25
3
DC/C (%)
DC/C = f(F)
20
2
15
1
10
-75
-50
-25
0
0
25
50
75
100
-1
125
CB01 / 10NF
CB01 / 39NF
CB02 / 100NF
5
150
Temp. (°C)
0
-5
-2
1
10
100
Dissipation Factor
50
TGTE=f(T)
10
TGTE=(10-4)
45
8
30
7
3
2
5
1
0
25
50
75
100
125
0
150
1
10
100
Frequency (kHz)
Temperature (°C)
Insulation Resistance
Impedance
Z (Ohms)
10,000
10000
RIS = f(F)
10000
CB01 / 10NF
CB01 / 39NF
CB02 / 100NF
4
10
0
1000
5
15
-25
TGTE = f(F)
6
20
-50
10000
Dissipation Factor
TGTE (%)
9
40
25
-75
1000
Frequency (kHz)
-3
RIS (G.ohm)
1000
Z = f(F)
1,000
100
0.100
CB02 8B 0104 J
10
CB01 / 10NF
CB01 / 39NF
CB02 / 100NF
-75
-50
-25
0.010
1000
0
1
25
10000
Frequency (kHz)
50
75
100
125
150
Temperature (°C)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
43
CB SERIES: PPS DIELECTRIC – LEAD FREE VERSION
RMS Voltage and Current versus Frequency
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB01 to CB03)
16 Vdc
16 Vdc
2.0
15
1.8
13
10
1.3
Irms (A)
Vrms (volts)
100nF
1.5
100nF
8
5
1.0
0.8
0.5
3
0
1.E+02
0.3
1.E+03
1.E+04
1.E+05
0.0
1.E+02
1.E+06
1.E+03
50 Vdc
45
2.8
2.5
82nF
2.0
Irms (A)
Vrms (volts)
2.3
30
25
20
1.8
1.5
1.3
1.0
15
0.8
10
0.5
5
0.3
1.E+03
1.E+04
1.E+05
0.0
1.E+02
1.E+06
1.E+03
1.E+04
Frequency (Hz)
Frequency (Hz)
44
1.E+06
50 Vdc
35
0
1.E+02
1.E+05
3.0
82nF
40
1.E+04
Frequency (Hz)
Frequency (Hz)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
1.E+05
1.E+06
CB SERIES: PPS DIELECTRIC – LEAD FREE VERSION
RoHS
MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT):
Mass / unit (g)
Lead
Mercury
Cadmium
CB range
RoHS Limit (ppm)
Pass/Fail
0
1000
Pass
0
1000
Pass
0
100
Pass
Hexavalent
Chromium
0
1000
Pass
PBB
PBDE
0
1000
Pass
0
1000
Pass
This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and
Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC
regarding ELV or End of Life Vehicle.
ROHS / ELV STATUS
LEAD-FREE STATUS / MOISTURE
SENSITIVITY RANKING
External Plating
Pb Free Reflow Solder compliant, MSL = 2a.
Reflow soldering referring to Jedec Standard with some
limitations. Additional JESD-97 data to be phased in MSL e3
termination.
100% Matte Sn as standard
PRODUCT LABELING:
PRODUCT TRACEABILITY:
(For informational purposes only to be phased in on reel and
container.)
Full internal material traceability by reference to unique lot
number marked on reel and external package.
Pb Free:
RoHS Compliant:
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
45
很抱歉，暂时无法提供与“CB018B0102JBA”相匹配的价格&库存，您可以联系我们找货
免费人工找货
工商网监
湘ICP备2023018690号
