CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
General Description
GENERAL DESCRIPTION
Film chip capacitor using a naked and stacked construction with
metallized PEN (polyethylene naphtalate).
ADVANTAGES
• Use of high temperature dielectric films make these capacitors
suitable for IR or vapor phase reflow processes. This chip is
built without specific encapsulation.
• The intrinsic elasticity of the dielectric film allows an excellent
compatibility of the capacitor with all types of material for
printed circuit boards.
• The self-healing property of film technology results to a safety
open failure mode and better overall reliability.
• Excellent thermal shock resistance.
APPLICATIONS
• Low dissipation factor ESR & ESL.
General purpose function in low voltage applications where
miniaturization and SMD is required. Typical applications
would be:
• No piezoelectric effect.
• Available in tape and reel suitable for automatic placement.
• Non-polar construction.
• Automotive (Airbag, Fuel injection calculator...)
• Telecom (Public switching systems, modems, telephone
set, cordless, mobile)
Outer Layer
• Industrial (SMPS, Power convertor module...)
Termination Plating :
100% matte Sn
Ni Barrier Under
Termination
Silver Epoxy
Resin
Brass
Active Layers : PEN dielectric
PERFORMANCE CHARACTERISTICS
Climatic Category
Capacitance Range
Tolerance on CR
Nominal Voltages
Test Voltage
Soldering methods
Tangent of Loss Angle at 1kHz (DF)
Insulation resistance minimum : IR
Temperature range
A.C. applications
55/125/56
1nF to 4.7μF
±5%, ±10%
25Vdc to 630Vdc
1.4Vr 2 sec. at 25°C
IR or vapor phase reflow (not suitable for wave soldering)
< 100 x 10-4
for C ≤ 0.33μF IR > 1000 MΩ at 20°C for 1 min. charge at 10Vdc
for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc
for C > 0.33μF IR C > 400 sec. at 20°C for 1 min. charge at 10Vdc
for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc
-55°C to 125°C with voltage derating of 1.25%/°C between 105°C and 125°C
For high frequency A.C. application please check with AVX
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
19
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.001μF
CB017C0102+ --
0.0012
CB017C0122+ --
0.0015
CB017C0152+ --
0.0018
CB017C0182+ --
0.0022
CB017C0222+ --
0.0027
CB017C0272+ --
0.0033
CB017C0332+ --
0.0047
CB017C0472+ --
0.0056
CB017C0562+ --
0.0068
CB017C0682+ --
0.0082
CB017C0822+ --
0.010μF
CB017C0103+ --
0.012
CB017C0123+ --
0.015
CB017C0153+ --
0.018
CB017C0183+ --
0.022
CB017C0223+ --
0.027
CB027C0273+ --
0.033
CB027C0333+ --
0.047
CB027C0473+ --
0.056
CB027C0563+ --
0.068
CB027C0683+ --
0.082
CB027C0823+ --
0.100μF
CB027C0104+ --
L
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
Chip Dimensions
*Tolerances
(page 6)
W
H max
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
2.20
(0.098) (0.087)
2.50
2.30
(0.098) (0.091)
millimeters (inches)
T
L
VOLTAGE Vdc: 25V Vac: 16V
Tape Dimensions
T
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
W
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
P1
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
K0
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
2.33
(0.092)
2.33
(0.092)
Reel Dimensions
A
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
( 7.087)
180
( 7.087)
180
( 7.087)
180
( 7.087)
180
( 7.087)
180
( 7.087)
180
( 7.087)
W1
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
W2 max
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA = tape & reel
20
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2000
BA
2000
2000
BA
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.001μF
CB017D0102+ --
0.0012
CB017D0122+ --
0.0015
CB017D0152+ --
0.0018
CB017D0182+ --
0.0022
CB017D0222+ --
0.0027
CB017D0272+ --
0.0033
CB017D0332+ --
0.0047
CB017D0472+ --
0.0056
CB017D0562+ --
0.0068
CB017D0682+ --
0.0082
CB017D0822+ --
0.010μF
CB017D0103+ --
0.012
CB017D0123+ --
0.015
CB017D0153+ --
0.018
CB017D0183+ --
0.022
CB017D0223+ --
0.027
CB027D0273+ --
0.033
CB027D0333+ --
0.047
CB027D0473+ --
0.056
CB027D0563+ --
0.068
CB027D0683+ --
0.082
CB027D0823+ --
0.100μF
CB027D0104+ --
L
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
Chip Dimensions
*Tolerances
(page 6)
W
H max
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
2.20
(0.098) (0.087)
2.50
2.30
(0.098) (0.091)
millimeters (inches)
T
L
VOLTAGE Vdc: 50V Vac: 40V
Tape Dimensions
T
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
W
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
P1
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
K0
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
2.33
(0.092)
2.33
(0.092)
Reel Dimensions
A
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
W1
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
W2 max
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2000
BA
2000
2000
BA
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA = tape & reel
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
21
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.001μF
CB037D0102+ --
0.0012
CB037D0122+ --
0.0015
CB037D0152+ --
0.0018
CB037D0182+ --
0.0022
CB037D0222+ --
0.0027
CB037D0272+ --
0.0033
CB037D0332+ --
0.0047
CB037D0472+ --
0.0056
CB037D0562+ --
0.0068
CB037D0682+ --
0.0082
0.010μF
CB037D0822+ --
CB037D0103+ --
L
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
2.00
(0.126) (0.079)
millimeters (inches)
T
L
VOLTAGE Vdc: 63V Vac: 40V
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.6
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.6
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.6
(0.024)
0.60
(0.024)
0.60
(0.024)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.0
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
Reel Dimensions
A
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
W1
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
W2 max
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
22
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
L
Capacitance
Range
(CR)
Ordering
Code
0.010μF
CB037D0103+ --
0.012
0.015
0.018
0.022
0.027
0.033
0.047
0.056
0.068
0.082
0.100μF
CB037D0123+ --
CB037D0153+ --
CB037D0183+ --
CB037D0223+ --
CB037D0273+ --
CB037D0333+ --
CB037D0473+ --
CB037D0563+ --
CB037D0683+ --
CB037D0823+ --
CB037D0104+ --
L
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.00
(.0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.50
(0.126) (0.099)
3.20
2.50
(0.126) (0.099)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.70
(0.126) (0.107)
3.20
2.70
(0.126) (0.107)
3.20
2.30
(0.126) (0.091)
3.20
2.30
(0.126) (0.091)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.50
(0.126) (0.099)
3.20
2.50
(0.126) (0.099)
3.20
2.80
(0.126) (0.111)
3.20
2.80
(0.126) (0.111)
VOLTAGE Vdc: 63V Vac: 40V
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
8.0
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
3.10
(0.122)
3.10
(0.122)
2.60
(0.102)
2.60
(0.102)
2.06
(0.081)
2.06
(0.081)
2.60
(0.102)
2.60
(0.102)
3.10
(0.122)
3.10
(0.122)
Reel Dimensions
A
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
W1
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
W2 max
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
700
BA
1500
3000
BC
1500
900
BA
1500
3600
BC
1500
1200
BA
1500
4500
BC
1500
900
BA
1500
3600
BC
1500
700
BA
1500
3000
BC
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
23
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
L
Capacitance
Range
(CR)
0.120
0.150
0.180
0.220
Ordering
Code
4.70
(0.185)
4.70
(0.185)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.30
(0.287)
7.30
(0.287)
7.30
(0.287)
10.5
(0.413)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
3.20
(0.126)
3.20
(0.126)
5.00
(0.195)
5.00
(0.195)
5.00
(0.195)
5.00
(0.195)
6.10
(0.240)
6.10
(0.240)
6.10
(0.240)
7.60
(0.299)
10.2
(0.402)
13.7
(0.539)
13.7
(0.539)
3.00
(0.118)
3.00
(0.118)
4.00
(0.158)
4.00
(0.158)
2.50
(0.099)
3.90
(0.154)
4.40
(0.173)
4.70
(0.185)
4.70
(0.185)
6.10
(0.240)
6.70
(0.264)
5.30
(0.209)
7.20
(0.283)
0.60
(0.024)
0.60
(0.024)
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
3.30
(0.130)
3.30
CB017E0122+ -(0.130)
3.30
CB017E0152+ -(0.130)
3.30
CB017E0182+ -(0.130)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
CB037D0224+ --
0.470
CB047D0474+ --
0.560
CB047D0564+ --
0.680
CB047D0684+ --
0.82*
CB057D0824+ --
1μF*
CB057D0105+ --
1.5*
CB057D0155+ --
2.2
CB167D0225+ --
2.7
CB177D0275+ --
3.3
CB187D0335+ --
4.7
CB187D0475+ --
0.001μF
CB017E0102+ --
0.0018
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
24
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
CB047D0334+ --
0.0015
VOLTAGE Vdc: 63V Vac: 40V
L
4.70
(0.185)
CB037D0124+ -4.70
(0.185)
4.70
(0.185)
CB037D0154+ -4.70
(0.185)
4.70
(0.185)
CB037D0184+ -4.70
3.20
2.40
(0.185) (0.126) (0.095)
0.330
0.0012
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.30
(0.126) (0.091)
3.20
2.30
(0.126) (0.091)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.40
(0.126) (0.095)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
2.60
(0.102)
2.60
(0.102)
2.06
(0.081)
2.06
(0.081)
2.60
(0.102)
Reel Dimensions
A
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
W1
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
W2 max
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
0.60
12.0
8.00
2.60
330
12.4
18.4
(0.024) (0.472) (0.315) (0.102) (12.99) (0.488) (0.724)
12.0
8.00
3.10
180
12.4
(0.472) (0.315) (0.122) (7.087) (0.488)
12.0
8.00
3.10
330
12.4
(0.472) (0.315) (0.122) (12.99) (0.488)
16.0
8.00
4.10
330
12.4
(0.629) (0.315) (0.162) (12.99) (0.488)
12.0
8.00
4.10
330
12.4
(0.472) (0.315) (0.162) (12.99) (0.488)
12.0
8.00
3.10
330
12.4
(0.472) (0.315) (0.122) (12.99) (0.488)
12.0
8.00
4.10
330
12.4
(0.472) (0.315) (0.162) (12.99) (0.488)
16.0
12.0
5.23
330
16.4
(0.629) (0.472) (0.206) (12.99) (0.645)
16.0
12.0
4.80
330
16.4
(0.629) (0.472) (0.189) (12.99) (0.645)
16.0
12.0
4.80
330
16.4
(0.629) (0.472) (0.189) (12.99) (0.645)
24.0
12.0
6.19
330
24.4
(0.944) (0.472) (0.244) (12.99) (0.961)
24.0
16.0
7.00
330
24.4
(0.944) (0.629) (0.274) (12.99) (0.961)
24.0
24.0
6.30
330
24.4
(0.944) (0.944) (0.248) (12.99) (0.961)
24.0
24.0
7.60
330
24.4
(0.944) (0.944) (0.299) (12.99) (0.961)
VOLTAGE Vdc: 100V Vac: 63V
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
8.00
4.00
1.20
180
8.40
(0.315) (0.158) (0.047) (7.087) (0.331)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
22.4
(0.881)
22.4
(0.881)
22.4
(0.881)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
*Special length: 7.3 +0.7/-0.3 (0.287 +0.026/-0.012)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
1500
900
BA
1500
3600
BC
1500
1200
BA
1500
4500
BC
1500
900
BA
1500
3600
BC
1500
700
BA
1500
3000
BC
1500
2300
BC
1500
2300
BC
1500
3000
BC
1500
2300
BC
1000
1100
BC
1000
1800
BC
1000
1800
BC
500
900
BC
300
600
BC
300
400
BC
300
300
BC
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
L
Capacitance
Range
(CR)
Ordering
Code
0.0022
CB017E0222+ --
0.0027
CB017E0272+ --
0.0033
CB017E0332+ --
0.0047
CB017E0472+ --
0.0056
CB017E0562+ --
0.0068
CB017E0682+ --
0.0082
CB017E0822+ --
0.010μF
CB017E0103+ --
0.012
CB027E0123+ --
0.015
CB027E0153+ --
0.018
CB027E0183+ --
0.022
CB027E0223+ --
0.027
CB037E0273+ --
0.033
CB037E0333+ --
0.047
CB037E0473+ --
0.056
CB037E0563+ --
0.068
CB037E0683+ --
0.082
CB037E0823+ --
L
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
3.20
2.20
(0.126) (0.087)
3.20
2.20
(0.126) (0.087)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.60
(0.126) (0.102)
3.20
2.60
(0.126) (0.102)
3.20
2.50
(0.126) (0.099)
3.20
2.50
(0.126) (0.099)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.50
(0.126) (0.099)
millimeters (inches)
VOLTAGE Vdc: 100V Vac: 63V
Tape Dimensions
T
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
W
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.0
(0.315)
8.00
(0.315)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
2.60
(0.1024)
2.60
(0.1024)
2.06
(0.081)
2.06
(0.081)
3.10
(0.122)
3.10
(0.122)
2.60
(0.102)
2.60
(0.102)
2.06
(0.081)
2.06
(0.081)
2.60
(0.102)
Reel Dimensions
A
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
W1
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
W2 max
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
3500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
1500
900
BA
1500
3600
BC
1500
1200
BA
1500
4500
BC
1500
700
BA
1500
3000
BC
1500
900
BA
1500
3600
BC
1500
1200
BA
1500
4500
BC
1500
900
BA
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
25
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.082
CB037E0823+ --
0.100μF
CB037E0104+ --
0.120
CB047E0124+ --
0.150
CB047E0154+ --
0.180
CB047E0184+ --
0.220
CB047E0224+ --
0.330
CB047E0334+ --
0.47*
CB057E0474+ --
0.56*
CB057E0564+ --
0.68*
CB057E0684+ --
0.82
CB167E0824+ --
1
CB167E0105+ --
1.5
CB177E0155+ --
2.2
CB177E0225+ --
3.3
CB187E0335+ --
0.001μF
CB037G0102+ --
0.0012
CB037G0122+ --
0.0015
CB037G0152+ --
0.0018
CB037G0182+ --
L
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.30
(0.287)
7.30
(0.287)
7.30
(0.287)
10.5
(0.413)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
26
VOLTAGE Vdc: 100V Vac: 63V
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.50
(0.126) (0.099)
3.20
3.00
(0.126) (0.118)
3.20
3.00
(0.126) (0.118)
5.00
4.00
(0.195) (0.158)
5.00
3.30
(0.195) (0.130)
5.00
3.00
(0.195) (0.118)
5.00
4.00
(0.195) (0.158)
5.00
4.00
(0.195) (0.158)
6.10
4.50
(0.240) (0.177)
6.10
4.00
(0.240) (0.158)
6.10
4.50
(0.240) (0.177)
7.6
5.80
(0.299) (0.229)
7.60
6.00
(0.299) (0.237)
10.2
5.50
(0.402) (0.217)
10.2
6.90
(0.402) (0.272)
13.7
7.10
(0.539) (0.280)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
millimeters (inches)
T
L
Tape Dimensions
Reel Dimensions
W
P1
K0
A
W1
12.0
8.00
2.60
330
12.4
(0.472) (0.315) (0.102) (12.99) (0.488)
12.0
8.00
3.10
180
12.4
(0.472) (0.315) (0.122) (7.087) (0.488)
12.0
8.00
3.10
330
12.4
(0.472) (0.315) (0.122) (12.99) (0.488)
12.0
8.00
4.10
330
12.4
(0.472) (0.315) (0.162) (12.99) (0.488)
12.0
8.00
3.45
330
12.4
(0.472) (0.315) (0.136) (12.99) (0.488)
12.0
8.00
3.10
330
12.4
(0.472) (0.315) (0.122) (12.99) (0.488)
12.0
8.00
4.10
330
12.4
(0.472) (0.315) (0.162) (12.99) (0.488)
16.0
8.00
4.10
330
16.4
(0.629) (0.315) (0.162) (12.99) (0.645)
16.0
12.0
4.80
330
16.4
(0.629) (0.472) (0.189) (12.99) (0.645)
16.0
12.0
4.10
330
16.4
(0.629) (0.472) (0.162) (12.99) (0.645)
16.0
12.0
4.80
330
16.4
(0.629) (0.472) (0.189) (12.99) (0.645)
24.0
12.0
6.19
330
24.4
(0.944) (0.472) (0.244) (12.99) (0.961)
24.0
12.0
6.19
330
24.4
(0.944) (0.472) (0.244) (12.99) (0.961)
24.0
16.0
5.70
330
24.4
(0.944) (0.629) (0.224) (12.99) (0.961)
24.0
16.0
7.00
330
24.4
(0.944) (0.629) (0.274) (12.99) (0.961)
24.0
24.0
7.60
330
24.4
(0.944) (0.944) (0.299) (12.99) (0.961)
VOLTAGE Vdc: 250V Vac: 160V
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.087) (0.488)
12.0
8.00
2.06
330
12.4
(0.472) (0.315) (0.081) (12.99) (0.488)
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.087) (0.488)
12.0
8.00
2.06
330
12.4
(0.472) (0.315) (0.081) (12.99) (0.488)
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.087) (0.488)
12.0
8.00
2.06
330
12.4
(0.472) (0.315) (0.081) (12.99) (0.488)
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.087) (0.488)
W2 max
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
22.4
(0.881)
22.4
(0.881)
22.4
(0.881)
22.4
(0.881)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
*Special length: 7.3 +0.7/-0.3 (0.287 +0.026/-0.012)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
1500
3600
BC
1500
700
BA
1500
3000
BC
1500
2300
BC
1500
2800
BC
1500
3000
BC
1500
2300
BC
1500
2300
BC
1000
1800
BC
1000
2300
BC
1000
1800
BC
500
900
BC
500
900
BC
300
700
BC
300
600
BC
300
300
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.0018
CB037G0182+ --
0.0022
CB037G0222+ --
0.0027
CB037G0272+ --
0.0033
CB037G0332+ --
0.0047
CB037G0472+ --
0.0056
CB037G0562+ --
0.0068
CB037G0682+ --
0.0082
CB037G0822+ --
0.010μF
CB037G0103+ --
0.012
CB037G0123+ --
0.015
CB037G0153+ --
0.018
CB037G0183+ --
L
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.40
(0.126) (0.094)
3.20
2.40
(0.126) (0.094)
3.20
2.50
(0.126) (0.099)
3.20
2.50
(0.126) (0.099)
millimeters (inches)
T
L
VOLTAGE Vdc: 250V Vac: 160V
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
Reel Dimensions
A
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
W1
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
W2 max
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
27
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
L
Capacitance
Range
(CR)
Ordering
Code
0.022
CB037G0223+ --
0.027
CB047G0273+ --
0.033
CB047G0333+ --
0.047
CB047G0473+ --
0.056
CB047G0563+ --
0.068
CB047G0683+ --
0.082
CB047G0823+ --
0.100μF
CB047G0104+ --
0.120
CB057G0124+ --
0.150
CB057G0154+ --
0.180
CB057G0184+ --
0.22μF
CB057G0224+ --
0.330
CB167G0334+ --
0.470
CB177G0474+ --
0.560
CB177G0564+ --
0.680
CB187G0684+ --
1μF
CB187G0105+ --
0.001μF
0.0012
0.0015
L
4.70
(0.185)
4.70
(0.185)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
4.70
(0.185)
CB037I0102+ -4.70
(0.185)
4.70
(0.185)
CB037I0122+ -4.70
(0.185)
4.70
CB037I0152+ -(0.185)
millimeters (inches)
VOLTAGE Vdc: 250V Vac: 160V
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.90
(0.126) (0.114)
3.20
2.90
(0.126) (0.114)
5.00
1.80
(0.195) (0.071)
5.00
2.20
(0.195) (0.087)
5.00
2.90
(0.195) (0.114)
5.00
2.90
(0.195) (0.114)
5.00
4.00
(0.195) (0.158)
5.00
4.50
(0.195) (0.177)
5.00
4.50
(0.195) (0.177)
6.10
3.90
(0.240) (0.153)
6.10
4.70
(0.240) (0.185)
6.10
5.00
(0.240) (0.197)
6.10
5.70
(0.240) (0.225)
7.60
6.10
(0.299) (0.240)
10.2
5.50
(0.402) (0.205)
10.2
6.00
(0.402) (0.236)
13.7
4.30
(0.539) (0.169)
13.7
6.40
(0.539) (0.252)
T
0.60
(0.024)
0.60
(0.024)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
T
Tape Dimensions
Reel Dimensions
W
P1
K0
A
W1
12.0
8.00
3.10
180
12.4
(0.472) (0.315) (0.122) (7.087) (0.488)
12.0
8.00
3.10
330
12.4
(0.472) (0.315) (0.122) (12.99) (0.488)
12.0
8.00
2.43
330
12.4
(0.472) (0.315) (0.096) (12.99) (0.488)
12.0
8.00
2.43
330
12.4
(0.472) (0.315) (0.096) (12.99) (0.488)
12.0
8.00
3.10
330
12.4
(0.472) (0.315) (0.122) (12.99) (0.488)
12.0
8.00
3.10
330
12.4
(0.472) (0.315) (0.122) (12.99) (0.488)
12.0
8.00
4.10
330
12.4
(0.472) (0.315) (0.161) (12.99) (0.488)
16.0
8.00
4.60
330
16.4
(0.629) (0.315) (0.181) (12.99) (0.645)
16.0
8.00
4.60
330
16.4
(0.629) (0.315) (0.181) (12.99) (0.645)
24.0
12.0
4.80
330
24.4
(0.944) (0.472) (0.189) (12.99) (0.961)
16.0
12.0
4.80
330
16.4
(0.629) (0.472) (0.189) (12.99) (0.645)
16.0
12.0
5.23
330
16.4
(0.629) (0.472) (0.206) (12.99) (0.645)
16.0
12.0
5.90
330
16.4
(0.629) (0.472) (0.232) (12.99) (0.645)
24.0
12.0
6.19
330
24.4
(0.944) (0.472) (0.244) (12.99) (0.961)
24.0
16.0
5.70
330
24.4
(0.944) (0.629) (0.224) (12.99) (0.961)
24.0
16.0
5.70
330
24.4
(0.944) (0.629) (0.224) (12.99) (0.961)
24.0
24.0
4.50
330
24.4
(0.944) (0.944) (0.177) (12.99) (0.961)
24.0
24.0
6.30
330
24.4
(0.944) (0.944) (0.248) (12.99) (0.961)
VOLTAGE Vdc: 400V Vac: 200V
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.09) (0.488)
12.0
8.00
2.06
330
12.4
(0.472) (0.315) (0.081) (12.99) (0.488)
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.09) (0.488)
12.0
8.00
2.06
330
12.4
(0.472) (0.315) (0.081) (12.99) (0.488)
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.09) (0.488)
W2 max
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
22.4
(0.881)
22.4
(0.881)
30.4
(1.196)
22.4
(0.881)
22.4
(0.881)
22.4
(0.881)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
28
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
1500
700
BA
1500
3000
BC
1500
3500
BC
1500
3500
BC
1500
3000
BC
1500
3000
BC
1500
2800
BC
1500
1900
BC
1500
1900
BC
1000
1800
BC
1000
1800
BC
1000
1100
BC
1000
900
BC
500
900
BC
300
700
BC
300
700
BC
300
600
BC
300
400
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.0015
CB037I0152+ --
0.0018
0.0022
0.0027
0.0033
0.0047
0.0056
0.0068
0.0082
CB037I0182+ --
CB037I0222+ --
CB037I0272+ --
CB037I0332+ --
CB037I0472+ --
CB037I0562+ --
CB037I0682+ --
CB037I0822+ --
0.010μF
CB047I0103+ --
0.012
CB047I0123+ --
0.015
CB047I0153+ --
0.018
CB047I0183+ --
0.022
CB047I0223+ --
0.027
CB047I0273+ --
L
4.70
(0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
5.00
1.90
(0.195) (0.075)
5.00
2.20
(0.195) (0.087)
5.00
2.00
(0.224) (0.079)
5.00
2.30
(0.195) (0.091)
5.00
2.80
(0.195) (0.110)
5.00
3.30
( 0.195) (0.130)
millimeters (inches)
T
L
VOLTAGE Vdc: 400V Vac: 200V
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.80
(0.032)
0.80
(0.032)
0.80
(0.087)
0.80
(0.032)
0.80
(0.032)
0.80
( 0.032)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
( 0.472)
P1
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
( 0.315)
K0
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.10
(0.083)
2.43
(0.096)
2.43
(0.096)
2.43
(0.096)
3.10
(0.122)
3.45
( 0.136)
Reel Dimensions
A
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99 )
W1
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
W2 max
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
( 0.724 )
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
4400
BC
1500
3500
BC
1500
4400
BC
1500
3500
BC
1500
3000
BC
1500
2800
BC
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
29
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.033
CB047I0333+ --
0.047
CB057I0473+ --
0.056
CB057I0563+ --
0.068
CB057I0683+ --
0.082
CB167I0823+ --
0.100μF
CB167I0104+ --
0.120
CB167I0124+ --
0.150
CB167I0154+ --
0.180
CB177I0184+ --
0.220
CB177I0224+ --
0.270
CB177I0274+ --
0.330
CB187I0334+ --
0.390
CB187I0394+ --
0.470
CB187I0474+ --
0.001μF
CB037K0102+ --
0.0012
CB037K0122+ --
0.0015
CB037K0152+ --
0.0018
CB037K0182+ --
0.0022
CB037K0222+ --
VOLTAGE Vdc: 400V Vac: 200V
L
5.80
( 0.228)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
15.3
(0.601)
Chip Dimensions
*Tolerances
(page 6)
W
H max
5.00
3.90
( 0.195) (0.154)
6.10
3.20
(0.24) (0.126)
6.10
3.70
(0.24) (0.146)
6.10
4.40
(0.24) (0.173)
7.60
4.50
(0.299) (0.177)
7.60
4.00
(0.299) (0.158)
7.60
5.00
(0.299) (0.196)
7.60
6.00
(0.299) (0.235)
10.2
5.10
(0.402) (0.200)
10.2
5.00
(0.402) (0.196)
10.2
6.50
(0.402) (0.255)
13.7
4.20
(0.539) (0.165)
13.7
5.80
(0.539) (0.228)
13.7
6.50
(0.539) (0.255)
T
0.80
( 0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.0315)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
millimeters (inches)
T
L
Tape Dimensions
Reel Dimensions
W
P1
K0
A
W1
12.0
8.00
4.10
330
12.4
( 0.472) ( 0.315) (0.162) (12.99 ) (0.488)
24.0
12.0
3.80
330
24.4
(0.944) (0.472) (0.149) (12.99) (0.96)
24.0
12.0
3.80
330
16.4
(0.944) (0.472) (0.149) (12.99) (0.645)
24.0
12.0
4.80
330
16.4
(0.944) (0.472) (0.189) (12.99) (0.645)
24.0
12.0
4.90
330
24.4
(0.944) (0.472) (0.193) (12.99) (0.961)
24.0
12.0
4.90
330
24.4
(0.944) (0.472) (0.193) (12.99) (0.961)
24.0
12.0
6.19
330
24.4
(0.944) (0.472) (0.244) (12.99) (0.961)
24.0
12.0
6.19
330
24.4
(0.944) (0.472) (0.244) (12.99) (0.961)
24.0
16.0
5.70
330
24.4
(0.944) (0.629) (0.225) (12.99) (0.961)
24.0
16.0
5.70
330
24.4
(0.944) (0.629) (0.225) (12.99) (0.961)
24.0
16.0
7.00
330
24.4
(0.944) (0.629) (0.275) (12.99) (0.961)
24.0
24.0
4.50
330
24.4
(0.944) (0.944) (0.178) (12.99) (0.961)
24.0
24.0
6.30
330
24.4
(0.944) (0.944) (0.248) (12.99) (0.961)
24.0
24.0
7.60
330
24.4
(0.944) (0.944) (0.299) (12.99) (0.961)
VOLTAGE Vdc: 630V Vac: 250V
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.09) (0.488)
12.0
8.00
2.06
330
12.4
(0.472) (0.315) (0.081) (12.99) (0.488)
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.09) (0.488)
12.0
8.00
2.06
330
12.4
(0.472) (0.315) (0.081) (12.99) (0.488)
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.09) (0.488)
12.0
8.00
2.06
330
12.4
(0.472) (0.315) (0.081) (12.99) (0.488)
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.09) (0.488)
12.0
8.00
2.06
330
12.4
(0.472) (0.315) (0.081) (12.99) (0.488)
12.0
8.00
2.06
180
12.4
(0.472) (0.315) (0.081) (7.09) (0.488)
W2 max
18.4
( 0.724 )
30.4
(1.196)
22.4
(0.881)
22.4
(0.881)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
30
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
1500
2300
BC
1000
2250
BC
1000
2250
BC
1000
1800
BC
500
1100
BC
500
1100
BC
500
900
BC
500
900
BC
300
700
BC
300
700
BC
300
600
BC
300
600
BC
300
400
BC
300
300
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.0022
CB037K0222+ --
0.0027
CB037K0272+ --
0.0033
CB037K0332+ --
0.0047
CB037K0472+ --
0.0056
CB047K0562+ --
0.0068
CB047K0682+ --
0.0082
CB047K0822+ --
0.010μF
CB047K0103+ --
0.012
CB047K0123+ --
0.015
CB047K0153+ --
0.018
CB047K0183+ --
0.022
CB057K0223+ --
0.027
CB057K0273+ --
0.033
CB057K0333+ --
0.047
CB167K0473+ --
0.056
CB167K0563+ --
0.068
CB167K0683+ --
0.082
CB177K0823+ --
0.100μF
CB177K0104+ --
L
4.70
(0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.50
(0.126) (0.099)
3.20
2.50
(0.126) (0.099)
5.00
2.00
(0.195) (0.079)
5.00
2.00
(0.195) (0.079)
5.00
2.20
(0.195) (0.086)
5.00
2.00
(0.195) (0.079)
5.00
3.00
(0.195) (0.118)
5.00
3.40
(0.195) (0.136)
5.00
4.00
(0.195) (0.157)
6.10
3.40
(0.240) (0.136)
6.10
4.00
(0.240) (0.157)
6.10
4.80
(0.240) (0.189)
7.60
3.80
(0.299) (0.150)
7.60
4.60
(0.299) (0.181)
7.60
5.50
(0.299) (0.216)
10.2
4.50
(0.402) (0.177)
10.2
4.60
(0.402) (0.181)
millimeters (inches)
T
L
VOLTAGE Vdc: 630V Vac: 250V
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.8
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
24.0
(0.944)
24.0
(0.944)
16.0
(0.629)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
P1
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.0
(0.315)
8.0
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
16.0
(0.629)
16.0
(0.629)
K0
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.10
(0.083)
2.10
(0.083)
2.43
(0.096)
2.10
(0.083)
3.10
(0.122)
3.45
(0.136)
4.10
(0.162)
3.80
(0.149)
4.80
(0.189)
5.23
(0.206)
3.93
(0.155)
6.19
(0.244)
6.19
(0.244)
4.70
(0.185)
4.70
(0.185)
Reel Dimensions
A
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
180
(7.09)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
W1
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
12.4
(0.488)
16.4
(0.645)
16.4
(0.645)
16.4
(0.645)
24.4
(0.961)
24.4
(0.961)
24.4
(0.961)
24.4
(0.961)
24.4
(0.961)
W2 max
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
18.4
(0.724)
22.4
(0.881)
22.4
(0.881)
22.4
(0.881)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1201
BA
1500
4500
BC
1500
4400
BC
1500
4400
BC
1500
3500
BC
1500
4400
BC
1500
3000
BC
1500
2800
BC
1500
2300
BC
1000
2250
BC
1000
1800
BC
1000
1100
BC
500
1400
BC
500
900
BC
500
900
BC
300
900
BC
300
900
BC
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
31
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Capacitance Values & Nominal Voltages
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
Capacitance
Range
(CR)
Ordering
Code
0.120
CB177K0124+ --
0.15*
CB177K0154K --
0.180
CB187K0184+ --
0.220
CB187K0224+ --
L
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
Chip Dimensions
*Tolerances
(page 6)
W
H max
10.2
6.00
(0.402) (0.236)
10.2
6.90
(0.402) (0.271)
13.7
5.60
(0.539) (0.220)
13.7
6.00
(0.539) (0.236)
For other Values: upon request
Replace the + by the tolerance code: J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
32
millimeters (inches)
T
L
VOLTAGE Vdc: 630V Vac: 250V
Tape Dimensions
T
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
W
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
P1
16.0
(0.629)
16.0
(0.629)
24.0
(0.944)
24.0
(0.944)
K0
7.00
(0.275)
7.00
(0.275)
6.30
(0.248)
6.30
(0.248)
Reel Dimensions
A
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
W1
24.4
(0.961)
24.4
(0.961)
24.4
(0.961)
24.4
(0.961)
W2 max
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
30.4
(1.196)
*Only available in tolerance ±10%
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
Packaging Unit
Reel
Pkg
Code
Bulk
Reel
300
600
BC
300
600
BC
300
400
BC
300
400
BC
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Mounting and Soldering Recommendations
MOUNTING AND SOLDERING RECOMMENDATIONS
SOLDERING PROFILE
The capacitors can be mounted using infrared and vapor phase soldering following recommended below.
They are NOT suitable for wave soldering.
All temperature refer to topside of the package, measured on the package body surface.
Ramp-Up (Ts max to Tp)
1206 to 1812
2220 to 6054
3°C / second max
3°C / second max
Preheat
- Temperature Min (Ts min)
- Temperature Max (Ts max)
- Time (ts min to ts max)
150°C
200°C
180 sec. max
Time maintained above
- Temperature (TL)
- Time (tL)
217°C
60 sec. max
Peak temperature (Tp max)
TP max
Temperature (ºC)
Profile Feature
150°C
200°C
180 sec. max
217°C
75 sec. max
250°C
255°C
Customer Peak temperature (Tp)
< 250ºC
< 255ºC
Time within 5°C of peak
temperature (Tp -5ºC)*
10 sec.
10 sec.
6°C / sec.
6°C / sec.
Ramp up
TL
TS max
tL
TS min
0
Ramp-Down
Ramp
down
ts
30
60
90
120
150
180
210
240
270
300
330
Time (seconds)
* Example : Tp = 238.5°C =>> tp = time between 238.5°C and 233.5°C (Tp-5°C)
# Reflow soldering referring to JEDEC Standard with some limitations
# JEDEC J-Std 020C
RECOMMENDED SOLDER PASTE THICKNESS
In case of hand soldering, the temperature of the soldering iron
should not be above 250°C. Special care must be taken to avoid
touching the capacitor body with the iron tip.
For optimum solderability, the recommended soldering paste
thickness: 1206 to 2824: 150 to 200μm
4030 to 6054 :200 to 300μm
C
B
PAD DIMENSIONS: MILLIMETERS (INCHES)
Size Code
01
02
03
04
05
16
17
18
A
Case Size
1206
1210
1812
2220
2824
4030
5040
6054
A
1.30 (0.051)
2.00 (0.079)
3.00 (0.118)
5.00 (0.195)
6.00 (0.234)
7.50 (0.295)
11.2 (0.441)
14.6 (0.575)
B
1.30 (0.051)
1.30 (0.051)
1.50 (0.059)
1.90 (0.075)
2.50 (0.098)
3.00 (0.118)
3.50 (0.137)
3.60 (0.147)
C
2.20 (0.087)
2.20 (0.087)
3.50 (0.137)
4.50 (0.178)
5.70 (0.224)
8.00 (0.315)
10.3 (0.406)
12.6 (0.496)
RECOMMENDED CLEANING
OTHER CAUTIONS
To clean flux from the PC board assembly, the recommended
products are: ethanol, isopropyl alcohol, and deionized water
wash. The cleaning products to avoid are: Toluene, Xylene,
Trichloroethylene, Terpene Cleaner EC-7, surface active agent. In
case of using another solvent, please contact us.
Flame retardancy: the dielectric film is not a flame retardant
material.
Environment: contact us when chips are used in humid or gas
atmosphere and /or when using resin.
Recommended handling: do not use edged tools, so not to
damage the capacitors..
TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121
Stress Type
Ref. Spec.
Test Conditions
Analysis
Results
JESD22-A104
-55°C +85(+10/-0)°C air
5 to 10 minutes soak 3 cycles/hour
SEM x 1000
Pass
Ambient Temperature /
Humidity Storage
30+/-2°C - 60+/-3% RH -2000H
SEM x 1000
Pass
High Temperature /
Humidity Storage
70+/-5°C - 93+3/-2% RH -1000H
SEM x 1000
Pass
Temperature cycling
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
33
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
Electrical Characteristics versus Temperature and Frequency
ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY
ELECTRICAL CHARACTERISTICS
5
4
3
2
1
0
-1
-2
-3
-4
-5
Capacitance
C/C 1 kHz (%)
Capacitance
C/C 20°C (%)
4
2
0
-2
-4
-60
70
FREQUENCY CHARACTERISTICS
-40
-20
0
DF 1 kHz (10-4)
40
60
80
20
Temperature (°C)
100
0.1
120 140
1
10
100
Frequency (kHz)
Dissipation Factor
300
60
Dissipation Factor
DF 20°C (10-4)
250
50
200
40
150
30
100
20
50
10
0
0
-60
-40
-20
0
40
60
80
20
Temperature (°C)
100
0.1
120 140
1
10
Insulation Resistance
100
100
1000
Frequency (kHz)
Impedance
IR x C (G.ohm x µF)
10000
Z (mOhm)
IR(G.ohm)
63 V range (nF)
1000
10
2.2
4.7
100
0
1
10
22
1
10
-40
-20
0
20
40
60
80
100
4700
Temperature (°C)
1
0.1
1
2200
1000
470
220
100
47
10
Frequency (MHz)
34
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
100
1000
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
RMS Voltage and Current versus Frequency
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB01 to CB05)
63 Vdc / 40 Vac
45
4.7µF
1µF
0.1µF
63 Vdc / 40 Vac
63Vdc / 40Vac
0.01µF
40
35
25
I rms (A)
V rms (V)
30
20
15
10
5
0
0.1
1
10
100
1000
10000
7
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
0.1
4.7µF
1µF
0.1µF
0.01µF
1
10
FREQUENCY (kHz)
2.2µF
1µF
0.1µF
0.01µF
4.5
10000
1000
10000
2.2µF
4
3.5
I rms (A)
V rms (V)
1000
100 Vdc / 63 Vac
3
1µF
2.5
2
1.5
1
0.1µF
0.5
1
10
100
1000
0
10000
0.01µF
0.1
1
10
180
1µF
0.1µF
250 Vdc / 160 Vac
0.01µF
160
140
I rms (A)
120
100
80
60
40
20
1
10
100
100
FREQUENCY (kHz)
250 Vdc / 160 Vac
V rms (V)
10000
5
FREQUENCY (kHz)
0
0.1
1000
FREQUENCY (kHz)
100 Vdc / 63 Vac
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
0.1
100
1000
10000
7
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
0.1
FREQUENCY (kHz)
1µF
0.1µF
0.01µF
1
10
100
FREQUENCY (kHz)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
35
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
RMS Voltage and Current versus Frequency
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB03 to CB05)
400 Vdc / 200 Vac
220
0.47µF
0.1µF
400 Vdc / 200 Vac
1
0.01µF
200
180
160
0.47µF
120
I rms (A)
V rms (V)
140
100
80
0.5
60
0.1µF
40
0.01µF
20
0
0.1
1
10
100
1000
10000
0
0.1
FREQUENCY (kHz)
1
10
100
1000
10000
1000
10000
FREQUENCY (kHz)
0.27µF
0.1µF
630 Vdc / 250 Vac
1
0.01µF
0.27µF
I rms (A)
V rms (V)
630 Vdc / 250 Vac
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
0.1
0.5
0.1µF
0.01µF
1
10
100
1000
0
10000
0.1
FREQUENCY (kHz)
1
10
100
FREQUENCY (kHz)
MAXIMUM PULSE RISE TIME (DV/DT)
36
Voltage Range
25
50
63
100
250
400
630
Dv/dt max.
(V/µsec)
15
40
40
50
150
200
250
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
CB SERIES: PEN DIELECTRIC – LEAD FREE VERSION
RoHS
MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT):
Mass / unit (g)
Lead
Mercury
Cadmium
CB range
RoHS Limit (ppm)
Pass/Fail
0
1000
Pass
0
1000
Pass
0
100
Pass
Hexavalent
Chromium
0
1000
Pass
PBB
PBDE
0
1000
Pass
0
1000
Pass
This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and
Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC
regarding ELV or End of Life Vehicle.
ROHS / ELV STATUS
LEAD-FREE STATUS / MOISTURE
SENSITIVITY RANKING
External Plating
Pb Free Reflow Solder compliant, MSL = 3.
Reflow soldering referring to Jedec Standard with some
limitations. Additional JESD-97 data to be phased in MSL e3
termination.
100% Matte Sn as standard
PRODUCT LABELING:
PRODUCT TRACEABILITY:
(For informational purposes only to be phased in on reel and
container.)
Full internal material traceability by reference to unique lot
number marked on reel and external package.
Pb Free:
RoHS Compliant:
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120418
– film chip capacitors –
37
很抱歉,暂时无法提供与“CB047G0333JBC”相匹配的价格&库存,您可以联系我们找货
免费人工找货