0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
CB182D0475JBC

CB182D0475JBC

  • 厂商:

    AVX(艾维克斯)

  • 封装:

    6054

  • 描述:

    薄膜电容 6054 4.7µF ±5% 15.30 x 13.70mm

  • 数据手册
  • 价格&库存
CB182D0475JBC 数据手册
CB Series: PET-HT Dielectric – Lead Free Version General Description GENERAL DESCRIPTION Film chip capacitor using a naked and stacked construction with metallized High Temperature PET (polyethylene terephtalate). ADVANTAGES • Use of high temperature dielectric films makes these capacitors suitable for IR or vapor phase reflow processes. This chip is built without specific encapsulation. • The intrinsic elasticity of the dielectric film allows an excellent compatibility of the capacitor with all types of material for printed circuit boards. • The self-healing property of film technology results to a safety open failure mode and better overall reliability. • Excellent thermal shock resistance. APPLICATIONS • Low dissipation factor ESR & ESL. General purpose function in low voltage applications where miniaturization and SMD is required. Typical applications would be: • No piezoelectric effect. • Automotive (Airbag, Fuel injection calculator...) • Telecom (Public switching systems, modems, telephone set, cordless, mobile) • Industrial (SMPS, Power convertor module...) • Non-polar construction. • Available in tape and reel suitable for automatic placement. Outer Layer Termination Plating : 100% matte Sn Ni Barrier Under Termination Silver Epoxy Resin Brass Active Layers : PET dielectric PERFORMANCE CHARACTERISTICS Climatic Category Capacitance Range Tolerance on CR Nominal Voltages Test Voltage Soldering methods Tangent of Loss Angle at 1kHz (DF) Insulation resistance minimum : IR 55/125/56 10nF to 4.7μF ±5%, ±10% 63Vdc to 630Vdc 1.4Vr 2 sec. at 25°C IR or vapor phase reflow (not suitable for wave soldering) < 100 x 10-4 for C ≤ 0.33μF IR > 1000 MΩ at 20°C for 1 min. charge at 10Vdc for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc Temperature range for C > 0.33μF IR C > 400 sec. at 20°C for 1 min. charge at 10Vdc for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc -55°C to 125°C with voltage derating of 1.25%/°C between 105°C and 125°C A.C. applications for high frequency A.C. application please check with AVX The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 120418 – film chip capacitors – 9 CB SERIES: PET-HT DIELECTRIC – LEAD FREE VERSION Capacitance Values & Nominal Voltages CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) Capacitance Range (CR) 0.270μF 0.330μF 0.390 0.470 0.560 0.680 0.820 1μF 1.5 2.2 3.3 4.7μF Ordering Code L Chip Dimensions *Tolerances (page 6) W H max VOLTAGE Vdc: 63V Vac: 40V Tape Dimensions T W 5.8 CB042D0274+ -(0.228) 5.80 CB042D0334+ -(0.228) 5.80 CB042D0394++ -(0.228) 5.80 CB042D0474+ -(0.228) 5.80 CB042D0564+ -(0.228) 5.80 CB042D0684+ -(0.228) 7.2 CB052D0824+ -(0.283) 7.2 CB052D0105+ -(0.283) 7.20 CB052D0155+ -(0.283) 10.5 CB162D0225+ -(0.413) 12.8 CB172D0335+ -(0.503) 15.3 CB182D0475+ -(0.601) 5.0 (0.195) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 6.1 (0.24) 6.1 (0.24) 6.10 (0.240) 7.6 (0.299) 10.2 (0.401) 13.7 (0.539) 2.8 (0.110) 3.30 (0.130) 3.40 (0.134) 3.50 (0.138) 3.50 (0.138) 4.00 (0.158) 3.7 (0.146) 3.7 (0.146) 5.30 (0.209) 5.8 (0.229) 5.50 (0.216) 4.90 (0.193) 0.8 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.8 (0.032) 0.8 (0.032) 0.80 (0.032) 0.8 (0.032) 0.80 (0.032) 0.80 (0.032) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 16.0 (0.629) 16.0 (0.629) 16.0 (0.629) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 5.8 (0.228) 5.80 (0.228) 5.8 (0.228) 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 7.20 (0.283) 7.20 (0.283) 7.20 (0.283) 7.20 (0.283) 10.5 (0.413) 5.0 (0.195) 5.00 (0.195) 5.0 (0.195) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 6.10 (0.240) 6.10 (0.240) 6.10 (0.240) 6.10 (0.240) 7.60 (0.299) 2.3 (0.091) 3.30 (0.130) 3.4 (0.134) 4.00 (0.158) 3.90 (0.154) 4.30 (0.169) 4.20 (0.165) 5.00 (0.197) 4.70 (0.185) 5.70 (0.224) 6.10 (0.240) 0.8 (0.032) 0.80 (0.032) 0.8 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.180μF CB042E0184+ -- 0.220μF CB042E0224+ -- 0.270μF CB042E0274 +-- 0.330 CB042E0334+ -- 0.390 CB042E0394+ -- 0.470 CB042E0474+ -- 0.560 CB052E0564+ -- 0.680 CB052E0684+ -- 0.820 CB052E0824+ -- 1μF CB052E0105+ -- 1.5 CB162E0155+ -- millimeters (inches) P1 Reel Dimensions K0 A W1 W2 max 8.0 3.1 330 12.4 (0.315) (0.122) (12.99) (0.488) 8.00 3.45 330 12.4 (0.315) (0.136) (12.99) (0.488) 8.00 3.45 330 12.4 (0.315) (0.136) (12.99) (0.488) 8.00 4.10 330 12.4 (0.315) (0.162) (12.99) (0.488) 8.00 4.10 330 12.4 (0.315) (0.162) (12.99) (0.488) 8.00 4.10 330 12.4 (0.315) (0.162) (12.99) (0.488) 8.00 3.8 330 24.4 (0.315) (0.149) (12.99) (0.96) 8.00 3.8 330 24.4 (0.315) (0.149) (12.99) (0.96) 12.0 5.50 330 16.4 (0.472) (0.216) (12.99) (0.645) 12 6.19 330 24.4 (0.472) (0.244) (12.99) (0.96) 16.0 5.70 330 24.4 (0.629) (0.224) (12.99) (0.961) 24.0 5.50 330 24.4 (0.944) (0.216) (12.99) (0.961) VOLTAGE Vdc: 100V Vac: 63V 12.0 8.0 2.43 330 12.4 (0.472) (0.315) (0.096) (12.99) (0.488) 12.0 8.00 3.45 330 12.4 (0.472) (0.315) (0.136) (12.99) (0.488) 12.0 8.0 3.45 330 12.4 (0.472) (0.315) (0.136) (12.99) (0.488) 12.0 8.00 4.10 330 12.4 (0.472) (0.315) (0.161) (12.99) (0.488) 12.0 8.00 4.10 330 12.4 (0.472) (0.315) (0.161) (12.99) (0.488) 12.0 8.0 4.50 330 12.4 (0.472) (0.315) (0.177) (12.99) (0.488) 16.0 12.0 4.80 330 16.4 (0.629) (0.472) (0.189) (12.99) (0.645) 16.0 12.0 5.23 330 16.4 (0.629) (0.472) (0.206) (12.99) (0.645) 16.0 12.0 4.80 330 16.4 (0.629) (0.472) (0.189) (12.99) (0.645) 16.0 12.0 5.90 330 16.4 (0.629) (0.472) (0.232) (12.99) (0.645) 24.0 12.0 6.19 330 24.4 (0.944) (0.472) (0.244) (12.99) (0.961) Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel Packaging Unit 18.4 (0.724) 18.4 (0.724) 18.4 (0.724) 18.4 (0.724) 18.4 (0.724) 18.4 (0.724) 30.4 (1.196) 30.4 (1.196) 22.4 (0.881) 30.4 (1.196) 30.4 (1.196) 30.4 (1.196) 18.4 (0.724) 18.4 (0.724) 18.4 (0.724) 18.4 (0.724) 18.4 (0.724) 18.4 (0.724) 22.4 (0.881) 22.4 (0.881) 22.4 (0.881) 22.4 (0.881) 30.4 (1.196) W H L 10 T The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 120418 – film chip capacitors – Reel Pkg Code Bulk Reel 1500 3000 BC 1500 2800 BC 1500 2800 BC 1500 2300 BC 1500 2300 BC 1500 2300 BC 1000 2250 BC 1000 2250 BC 1000 1000 BC 500 900 BC 300 700 BC 300 500 BC 1500 3500 BC 1500 3000 BC 1500 2800 BC 1500 2300 BC 1500 2300 BC 1500 1900 BC 1000 1800 BC 1000 1100 BC 1000 1800 BC 1000 900 BC 500 900 BC CB SERIES: PET-HT DIELECTRIC – LEAD FREE VERSION Capacitance Values & Nominal Voltages CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) millimeters (inches) VOLTAGE Vdc: 100V Vac: 63V Capacitance Range (CR) Ordering Code 2.2 CB172E0225+ -- 3.3 CB182E0335+ -- 4.7μF CB182E0475+ -- 0.047μF CB042G0473+ -- 0.056 CB042G0563+ -- 0.068 CB042G0683+ -- 0.082 CB042G0823+ -- 0.1μF CB042G0104+ -- 0.120 CB052G0124+ -- 0.150 CB052G0154+ -- 0.180 CB052G0184+ -- 0.220 CB052G0224+ -- 0.270 CB162G0274+ -- 0.330 CB162G0334+ -- 0.390 CB162G0394+ -- 0.470 CB162G0474+ -- 0.560 CB172G0564+ -- 0.680 CB172G0684+ -- 0.820 CB172G0824+-- 0.820 CB182G0824+ -- 1μF CB172G0105+-- 1μF CB182G0105+ -- 1.5 CB182G0155+ -- Chip Dimensions *Tolerances (page 6) L W H max 12.8 10.2 5.50 (0.503) (0.401) (0.216) 15.3 13.7 5.20 (0.601) (0.539) (0.204) 15.3 13.7 7.10 (0.601) (0.539) (0.279) 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 7.20 (0.283) 7.20 (0.283) 7.20 (0.283) 7.20 (0.283) 10.5 (0.413) 10.5 (0.413) 10.5 (0.413) 10.5 (0.413) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 15.3 (0.601) 12.8 (0.503) 15.3 (0.601) 15.3 (0.601) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 6.10 (0.240) 6.10 (0.240) 6.10 (0.240) 6.10 (0.240) 7.60 (0.299) 7.60 (0.299) 7.60 (0.299) 7.6 (0.299) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 13.7 (0.539) 10.2 (0.402) 13.7 (0.539) 13.7 (0.539) 3.00 (0.118) 3.60 (0.142) 4.00 (0.158) 4.00 (0.158) 4.00 (0.158) 4.30 (0.169) 4.30 (0.169) 5.10 (0.200) 4.90 (0.193) 4.80 (0.189) 5.60 (0.220) 5.40 (0.213) 6.15 (0.241) 5.60 (0.220) 6.50 (0.255) 7.00 (0.276) 5.10 (0.201) 7.00 (0.276) 6.00 (0.236) 7.00 (0.276) Tape Dimensions Reel Dimensions Packaging Unit T 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) W P1 K0 A W1 W2 max 24.0 16.0 5.70 330 24.4 30.4 (0.944) (0.629) (0.224) (12.99) (0.961) (1.196) 24.0 24.0 5.50 330 24.4 30.4 (0.944) (0.944) (0.216) (12.99) (0.961) (1.196) 24.0 24.0 7.60 330 24.4 30.4 (0.944) (0.944) (0.299) (12.99) (0.961) (1.196) VOLTAGE Vdc: 250V Vac: 160V 0.80 12.0 8.00 3.10 330 12.4 18.4 (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724) 0.80 12.0 8.00 4.10 330 12.4 18.4 (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724) 0.80 12.0 8.00 4.10 330 12.4 18.4 (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724) 0.80 12.0 8.00 4.10 330 12.4 18.4 (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724) 0.80 12.0 8.00 4.10 330 12.4 18.4 (0.032) (0.472) (0.315) (0.161) (12.99) (0.448) (0.724) 0.80 16.0 12.0 4.80 330 16.4 22.4 (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881) 0.80 16.0 12.0 4.80 330 16.4 22.4 (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881) 0.80 16.0 12.0 5.23 330 16.4 22.4 (0.032) (0.629) (0.472) (0.206) (12.99) (0.645) (0.881) 0.80 16.0 12.0 5.23 330 16.4 22.4 (0.032) (0.629) (0.472) (0.206) (12.99) (0.645) (0.881) 0.80 24.0 12.0 6.19 330 24.4 30.4 (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.80 24.0 12.0 6.19 330 24.4 30.4 (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.80 24.0 12.0 6.19 330 24.4 30.4 (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.80 24.0 12.0 6.19 330 24.4 30.4 (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.80 24.0 16.0 5.70 330 24.4 30.4 (0.032) (0.944) (0.629) (0.225) (12.99) (0.961) (1.196) 0.80 24.0 16.0 7.00 330 24.4 30.4 (0.032) (0.944) (0.629) (0.275) (12.99) (0.961) (1.196) 0.80 24.0 16.0 7.00 330 24.4 30.4 (0.032) (0.944) (0.629) (0.275) (12.99) (0.961) (1.196) 0.80 24.0 24.0 5.50 330 24.4 30.4 (0.032) (0.944) (0.944) (0.217) (12.99) (0.961) (1.196) 0.80 24.0 16.0 7.00 330 24.4 30.4 (0.032) (0.944) (0.629) (0.275) (12.99) (0.961) (1.196) 0.80 24.0 24.0 6.30 330 24.4 30.4 (0.032) (0.944) (0.944) (0.248) (12.99) (0.961) (1.196) 0.80 24.0 24.0 7.60 330 24.4 30.4 (0.0315) (0.944) (0.944) (0.299) (12.99) (0.961) (1.196) Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel Reel Pkg Code Bulk Reel 300 700 BC 300 500 BC 300 300 BC 1500 3000 BC 1500 2300 BC 1500 2300 BC 1500 2300 BC 1500 2300 BC 1000 1800 BC 1000 1800 BC 1000 1100 BC 1000 1100 BC 500 1100 BC 500 900 BC 500 900 BC 500 900 BC 300 700 BC 300 600 BC 300 600 BC 300 500 BC 300 600 BC 300 400 BC 300 300 BC W H L The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 042021 – film chip capacitors – T 11 CB SERIES: PET-HT DIELECTRIC – LEAD FREE VERSION Capacitance Values & Nominal Voltages CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) Capacitance Range (CR) Ordering Code L 0.010μF CB042I0103+ -- 0.012 CB042I0123+ -- 0.015 CB042I0153+ -- 0.018 CB052I0183+ -- 0.022 CB052I0223+ -- 0.027 CB052I0273+ -- 0.033 CB052I0333+ -- 0.047 CB052I0473+ -- 0.056 CB162I0563+ -- 0.068 CB162I0683+ -- 0.082 CB162I0823+ -- 0.100μF CB162I0104+ -- 0.120 CB172I0124+ -- 0.150 CB172I0154+ -- 0.180 CB172I0184+ -- 0.220 CB172I0224+ -- 0.270 CB172I0274+ -- 0.330 CB182I0334+ -- 0.470μF CB182I0474+ -- 0.010μF CB042K0103+ -- 0.012 CB042K0123+ -- 0.015 CB042K0153+ -- 0.018 CB052K0183+ -- 5.80 (0.228) 5.80 (0.228) 5.80 (0.228) 7.2 (0.283) 7.2 (0.283) 7.2 (0.283) 7.2 (0.283) 7.20 (0.283) 10.5 (0.413) 10.5 (0.413) 10.5 (0.413) 10.5 (0.413) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 15.3 (0.601) 15.3 (0.601) Chip Dimensions *Tolerances (page 6) W H max 5.00 (0.195) 5.00 (0.195) 5.00 (0.195) 6.1 (0.240) 6.1 (0.240) 6.1 (0.240) 6.1 (0.240) 6.10 (0.240) 7.60 (0.299) 7.60 (0.299) 7.60 (0.299) 7.60 (0.299) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 13.7 (0.539) 13.7 (0.539) 3.00 (0.017) 2.40 (0.095) 4.00 (0.158) 2.8 (0.110) 3.5 (0.138) 2.8 (0.110) 3.3 (0.130) 4.50 (0.177) 3.10 (0.122) 3.60 (0.141) 4.20 (0.165) 4.70 (0.185) 3.90 (0.154) 4.60 (0.181) 5.60 (0.220) 6.80 (0.265) 6.80 (0.265) 5.60 (0.220) 6.20 (0.244) millimeters (inches) VOLTAGE Vdc: 63V Vac: 40V Tape Dimensions T W 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.8 (0.032) 0.8 (0.032) 0.8 (0.032) 0.8 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 5.80 5.00 2.80 0.80 (0.228) (0.195) (0.110) (0.032) 5.80 5.00 3.30 0.80 (0.228) (0.195) (0.130) (0.032) 5.80 5.00 4.00 0.80 (0.228) (0.195) (0.158) (0.032) 5.80 6.10 2.80 0.80 (0.228) (0.240) (0.110) (0.032) P1 Reel Dimensions K0 A W1 W2 max 12.0 8.00 3.10 330 12.4 (0.472) (0.315) (0.122) (12.99) (0.488) 12.0 8.00 2.43 330 12.4 (0.472) (0.315) (0.096) (12.99) (0.488) 12.0 8.00 4.10 330 12.4 (0.472) (0.315) (0.161) (12.99) (0.488) 16.0 12 3.8 330 16.4 (0.629) (0.472) (0.150) (12.99) (0.645) 16.0 12 3.8 330 16.4 (0.629) (0.472) (0.150) (12.99) (0.645) 16.0 12 3.8 330 16.4 (0.629) (0.472) (0.150) (12.99) (0.645) 16.0 12 3.8 330 16.4 (0.629) (0.472) (0.150) (12.99) (0.645) 16.0 12.0 4.80 330 16.4 (0.629) (0.472) (0.189) (12.99) (0.645) 24.0 12.0 3.93 330 24.4 (0.944) (0.472) (0.155) (12.99) (0.961) 24.0 12.0 3.93 330 24.4 (0.944) (0.472) (0.155) (12.99) (0.961) 24.0 12.0 6.19 330 24.4 (0.944) (0.472) (0.244) (12.99) (0.961) 24.0 12.0 6.19 330 24.4 (0.944) (0.472) (0.244) (12.99) (0.961) 24.0 16.0 4.00 330 24.4 (0.944) (0.629) (0.157) (12.99) (0.961) 24.0 16.0 4.70 330 24.4 (0.944) (0.629) (0.185) (12.99) (0.961) 24.0 16.0 7.00 330 24.4 (0.944) (0.629) (0.274) (12.99) (0.961) 24.0 16.0 7.00 330 24.4 (0.944) (0.629) (0.274) (12.99) (0.961) 24.0 16.0 7.00 330 24.4 (0.944) (0.629) (0.274) (12.99) (0.961) 24.0 24.0 6.30 330 24.4 (0.944) (0.944) (0.248) (12.99) (0.961) 24.0 24.0 6.30 330 24.4 (0.944) (0.944) (0.248) (12.99) (0.961) VOLTAGE Vdc: 630V Vac: 250V 12.0 8.00 3.10 330 12.4 (0.472) (0.315) (0.122) (12.99) (0.488) 12.0 8.00 3.10 330 12.4 (0.472) (0.315) (0.122) (12.99) (0.488) 12.0 8.00 4.10 330 12.4 (0.472) (0.315) (0.161) (12.99) (0.488) 24.0 12.0 3.80 330 24.4 (0.944) (0.472) (0.149) (12.99) (0.961) Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel Packaging Unit 18.4 (0.724) 18.4 (0.724) 18.4 (0.724) 22.4 (0.881) 22.4 (0.881) 22.4 (0.881) 22.4 (0.881) 22.4 (0.881) 30.4 (1.196) 30.4 (1.196) 30.4 (1.196) 30.4 (1.196) 30.4 (1.196) 30.4 (1.196) 30.4 (1.196) 30.4 (1.196) 30.4 (1.196) 30.4 (1.196) 30.4 (1.196) 18.4 (0.724) 18.4 (0.724) 18.4 (0.724) 30.4 (1.196) W H L 12 T The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 120418 – film chip capacitors – Reel Pkg Code Bulk Reel 1500 3000 BC 1500 3500 BC 1500 2300 BC 1000 2250 BC 1000 2250 BC 1000 2250 BC 1000 2250 BC 1000 1800 BC 500 1400 BC 500 1400 BC 500 900 BC 500 900 BC 300 1100 BC 300 900 BC 300 600 BC 300 600 BC 300 600 BC 300 400 BC 300 400 BC 1500 3000 BC 1500 2800 BC 1500 2300 BC 1000 2250 BC CB SERIES: PET-HT DIELECTRIC – LEAD FREE VERSION Capacitance Values & Nominal Voltages CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) Capacitance Range (CR) Ordering Code 0.022 CB052K0223+ -- 0.027 CB052K0273+ -- 0.033 CB052K0333+ -- 0.047 CB162K0473+ -- 0.056 CB162K0563+ -- 0.068 CB162K0683+ -- 0.082 CB172K0823+ -- 0.100μF CB172K0104+ -- 0.120 CB172K0124+ -- 0.150 CB172K0154+ -- 0.180 CB182K0184+ -- 0.220 CB182K0224+ -- 0.270μF CB182K0274+ -- L 7.20 (0.283) 7.20 (0.283) 7.20 (0.283) 10.5 (0.413) 10.5 (0.413) 10.5 (0.413) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 12.8 (0.503) 15.3 (0.601) 15.3 (0.601) 15.3 (0.601) Chip Dimensions *Tolerances (page 6) W H max 6.10 (0.240) 6.10 (0.240) 6.10 (0.240) 7.60 (0.299) 7.60 (0.299) 7.60 (0.299) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 13.7 (0.539) 13.7 (0.539) 13.7 (0.539) 3.50 (0.138) 4.10 (0.161) 5.00 (0.197) 3.60 (0.141) 4.30 (0.169) 5.20 (0.205) 4.30 (0.169) 5.00 (0.197) 5.60 (0.220) 6.90 (0.271) 5.00 (0.197) 5.80 (0.229) 7.20 (0.284) millimeters (inches) VOLTAGE Vdc: 630V Vac: 250V Tape Dimensions T W P1 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 24.0 (0.944) 16.0 (0.629) 16.0 (0.629) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 16.0 (0.629) 16.0 (0.629) 16.0 (0.629) 16.0 (0.629) 24.0 (0.944) 24.0 (0.944) 24.0 (0.944) Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel Reel Dimensions K0 A W1 Packaging Unit W2 max 3.80 330 24.4 30.4 (0.149) (12.99) (0.961) (1.196) 4.80 330 16.4 22.4 (0.189) (12.99) (0.645) (0.881) 4.80 330 16.4 22.4 (0.189) (12.99) (0.645) (0.881) 3.93 330 24.4 30.4 (0.155) (12.99) (0.961) (1.196) 6.19 330 24.4 30.4 (0.244) (12.99) (0.961) (1.196) 6.19 330 24.4 30.4 (0.244) (12.99) (0.961) (1.196) 4.70 330 24.4 30.4 (0.185) (12.99) (0.961) (1.196) 5.70 330 24.4 30.4 (0.225) (12.99) (0.961) (1.196) 5.70 330 24.4 30.4 (0.225) (12.99 ) (0.961) (1.196 ) 7.00 330 24.4 30.4 (0.275) (12.99 ) (0.961) (1.196 ) 5.50 330 24.4 30.4 (0.217) (12.99) (0.961) (1.196) 6.30 330 24.4 30.4 (0.248) (12.99) (0.961) (1.196) 7.60 330 24.4 30.4 (0.299) (12.99) (0.961) (1.196) Reel Pkg Code Bulk Reel 1000 2250 BC 1000 1800 BC 1000 1100 BC 500 1400 BC 500 900 BC 500 900 BC 300 900 BC 300 700 BC 300 700 BC 300 600 BC 300 500 BC 300 400 BC 300 300 BC W H L T The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 120418 – film chip capacitors – 13 CB SERIES: PET-HT DIELECTRIC – LEAD FREE VERSION Mounting and Soldering Recommendations MOUNTING AND SOLDERING RECOMMENDATIONS SOLDERING PROFILE The capacitors can be mounted using infrared and vapor phase soldering following recommended below. They are NOT suitable for wave soldering. All temperature refer to topside of the package, measured on the package body surface. 2220 to 2824 4030 to 6054 3°C / second max 3°C / second max Preheat - Temperature Min (Ts min) - Temperature Max (Ts max) - Time (ts min to ts max) 150°C 200°C 180 sec. max 150°C 200°C 180 sec. max Time maintained above - Temperature (TL) - Time (tL) 217°C 60 sec. max 217°C 75 sec. max 240°C 245°C < 240ºC < 245ºC Peak temperature (Tp max) Customer Peak temperature (Tp) TP max Temperature (ºC) Profile Feature Ramp-Up (Ts max to Tp) Ramp up TL TS max tL TS min Ramp down ts 0 30 60 90 120 150 180 210 240 270 300 330 Time (seconds) Time within 5°C of peak temperature (Tp -5ºC)* Ramp-Down 10 sec. 10 sec. 6°C / sec. 6°C / sec. # Reflow soldering referring to JEDEC Standard with some limitations # JEDEC J-Std 020C * Example : Tp = 238.5°C =>> tp = time between 238.5°C and 233.5°C (Tp-5°C) RECOMMENDED SOLDER PASTE THICKNESS In case of hand soldering, the temperature of the soldering iron should not be above 250°C. Special care must be taken to avoid touching the capacitor body with the iron tip. For optimum solderability, the recommended soldering paste thickness: 2220 to 2824 :150 to 200μm 4030 to 6054 :200 to 300μm C B PAD DIMENSIONS: MILLIMETERS (INCHES) Size Code 04 05 16 17 18 A Case Size 2220 2824 4030 5040 6064 A 5.00 (0.195) 6.00 (0.234) 7.50 (0.295) 11.2 (0.441) 14.6 (0.575) B 1.90 (0.075) 2.50 (0.098) 3.00 (0.118) 3.50 (0.137) 3.60 (0.147) C 4.50 (0.178) 5.70 (0.224) 8.00 (0.315) 10.3 (0.406) 12.6 (0.496) RECOMMENDED CLEANING OTHER CAUTIONS To clean flux from the PC board assembly, the recommended products are: ethanol, isopropyl alcohol, and deionized water wash. The cleaning products to avoid are: Toluene, Xylene, Trichloroethylene, Terpene Cleaner EC-7, surface active agent. In case of using another solvent, please contact us. Flame retardancy: the dielectric film is not a flame retardant material. Environment: contact us when chips are used in humid or gas atmosphere and /or when using resin. Recommended handling: do not use edged tools, so not to damage the capacitors. TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121 14 Stress Type Ref. Spec. Test Conditions Analysis Results Temperature cycling JESD22-A104 -55°C +85(+10/-0)°C air 5 to 10 minutes soak 3 cycles/hour SEM x 1000 Pass Ambient Temperature / Humidity Storage 30+/-2°C - 60+/-3% RH -2000H SEM x 1000 Pass High Temperature / Humidity Storage 70+/-5°C - 93+3/-2% RH -1000H SEM x 1000 Pass The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 120418 – film chip capacitors – CB SERIES: PET-HT DIELECTRIC – LEAD FREE VERSION Electrical Characteristics versus Temperature and Frequency ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY ELECTRICAL CHARACTERISTICS FREQUENCY CHARACTERISTICS Capacitance 10 8 4 C/C vs TEMPERATURE Capacitance C/C 20°C (%) 3 6 2 4 1 2 0 0 -1 -2 -2 -4 -3 -6 -8 -55˚C -30˚C -5˚C -4 +20˚C +45˚C +70˚C +95˚C +120˚C -5 0.1 Temperature Dissipation Factor 400 160 140 10 100 FREQUENCY (kHz) 1000 Dissipation Factor DF 20°C (10 -4) DC/C = (temperature) DF (1kHz) vs TEMPERATURE 300 120 D.F. (10 -4) 1 100 200 80 60 100 40 0 20 0 -55˚C -30˚C -5˚C 0.1 1 100 10 1000 FREQUENCY (kHz) +20˚C +45˚C +70˚C +95˚C +120˚C Temperature Insulation Resistance 10000.0 1000.00 100nF IR vs TEMPERATURE Z (mOhm) Impedance IR(G.ohm) 1000.0 100.00 100.0 47 nF 220 nF 10.0 10.00 100 nF 470 nF 1µF 1.0 4.7µF 0.1 -55˚C -30˚C -5˚C 1.00 1.00 +20˚C +45˚C +70˚C +95˚C +120˚C 10.00 FREQUENCY (MHz) Temperature The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 120418 – film chip capacitors – 15 CB SERIES: PET-HT DIELECTRIC – LEAD FREE VERSION RMS Voltage and Current versus Frequency RMS VOLTAGE AND CURRENT VERSUS FREQUENCY MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms (for size CB04 to CB18) 45 40 35 30 25 20 15 10 5 0 63Vdc / 40 Vac 5 4.7µF 1.5µF 0.47µF 4.5 4 I rms (A) V rms (V) 63Vdc / 40 Vac 4.7µF 3.5 3 2.5 2 1.5µF 0.47µF 1.5 1 0.1 1 10 100 1000 0.5 0 0.1 10000 FREQUENCY (kHz) 1 10 100 1000 10000 1000 10000 FREQUENCY (kHz) 100 Vdc / 63 Vac 100 Vdc / 63 Vac 70 60 4.7µF 1.5µF 0.22µF 40 I rms (A) V rms (V) 50 30 20 10 0 0.1 1 10 100 1000 10000 FREQUENCY (kHz) 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0.1 4.7µF 1.5µF 0.22µF 1 10 100 FREQUENCY (kHz) 250 Vdc / 160 Vac 1µF 0.47µF 0.1µF 120 100 80 60 40 20 0 0.1 I rms (A) V rms (V) 180 160 140 250 Vdc / 160 Vac 1 10 100 1000 10000 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0.1 FREQUENCY (kHz) 16 1µF 0.47µF 0.1µF 1 10 100 FREQUENCY (kHz) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 120418 – film chip capacitors – 1000 10000 CB SERIES: PET-HT DIELECTRIC – LEAD FREE VERSION RMS Voltage and Current versus Frequency RMS VOLTAGE AND CURRENT VERSUS FREQUENCY MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms (for size CB04 to CB18) 220 200 180 160 140 120 100 80 60 40 20 0 0.1 0.47µF 0.1µF 400 Vdc / 200 Vac 1 0.01µF 0.47µF I rms (A) V rms (V) 400 Vdc / 200 Vac 0.5 0.1µF 0.01µF 1 10 100 1000 0 0.1 10000 1 10 FREQUENCY (kHz) 0.27µF 0.1µF 1000 10000 1000 10000 630 Vdc / 250 Vac 1 0.01µF 0.27µF I rms (A) V rms (V) 630 Vdc / 250 Vac 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 0.1 100 FREQUENCY (kHz) 0.5 0.1µF 0.01µF 1 10 100 1000 0 0.1 10000 FREQUENCY (kHz) 1 10 100 FREQUENCY (kHz) MAXIMUM PULSE RISE TIME (DV/DT) Voltage Range 63 100 250 400 630 Dv/dt max. (V/µsec) 40 50 150 200 250 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 120418 – film chip capacitors – 17 CB SERIES: PET-HT DIELECTRIC – LEAD FREE VERSION RoHS MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT): Mass / unit (g) Lead Mercury Cadmium CB range RoHS Limit (ppm) Pass/Fail 0 1000 Pass 0 1000 Pass 0 100 Pass Hexavalent Chromium 0 1000 Pass PBB PBDE 0 1000 Pass 0 1000 Pass This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC regarding ELV or End of Life Vehicle. ROHS / ELV STATUS External Plating LEAD-FREE STATUS / MOISTURE SENSITIVITY RANKING 100% Matte Sn as standard Pb Free Reflow Solder compliant, MSL = 3. Reflow soldering referring to Jedec Standard with some limitations. Additional JESD-97 data to be phased in MSL e3 termination. PRODUCT LABELING: PRODUCT TRACEABILITY: (For informational purposes only to be phased in on reel and container.) Full internal material traceability by reference to unique lot number marked on reel and external package. Pb Free: 18 RoHS Compliant: The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 120418 – film chip capacitors –
CB182D0475JBC 价格&库存

很抱歉,暂时无法提供与“CB182D0475JBC”相匹配的价格&库存,您可以联系我们找货

免费人工找货