CDR12BG150AFUS

RF/Microwave Multilayer Capacitors (MLC) CDR Series — MIL-PRF-55681/4/5 (RF/Microwave Chips) HOW TO ORDER CDR 12 B G 101 A F W S Designation Failure Rate Level Identifies established reliability, ceramic dielectric, fixed, and chip capacitors (Established at 90% confidence) M = 1% per 1,000 hours P = 0.1% per 1,000 hours R = 0.01% per 1,000 hours S = 0.001% per 1,000 hours Style Termination Finish (Military Designations) Code Identifies dimensions of the capacitor and lead type, where applicable. M = Palladium Silver (CDR11, CDR12, CDR13, CDR14) N = Gold over Nickel over Silver (CDR11, CDR13) S = Solder Coated, Final (CDR12, CDR14, CDR23, CDR25) T = Silver (CDR21, CDR22, CDR24) U = Solder Coated, Nickel Barrier (CDR12, CDR14) W = Solder plated, nickel barrier Rated Temperature -55°C to +125°C Voltage Temperature (TCC) Limits G = +90 ±20 PPM/°C P = 0 ±30 PPM/°C (CDR12, CDR14, not for new designs) Y = Base metallization-barrier metal-tin (100 percent) Z = Solder plated, Nickel Barrier (CDR12, CDR14) N and U Terminations preferred for best solderability, thermocompression bonding, leach and migration resistance, and shelf life for chips and pellets. Capacitance Code The first two digits represent significant figures and the last digit specifies the number of zeros to follow. When fractional values of pF are required, the letter R shall be used to indicate the decimal point. Rated DC Voltage @ 125°C A = 50 VDC D = 300 VDC B = 100 VDC E = 500 VDC Capacitance Tolerance Code C = 200 VDC K = 150 VDC = ±.1 pF B G = ±2% C = ±.25 pF J = ±5% D = ±.5 pF K = ±10% TABLE I - STYLES CDR11 AND CDR12 CAPACITOR CHARACTERISTICS Type Designation * CDR1-B-0R1KB-- to CDR1-B-0R2---B-CDR1-B-0R3K--- to CDR1-B-0R4--CDR1-B-0R5K--- to CDR1-B-2R2---** CDR1-B-2R4K--- to CDR1-B-6R2---*** CDR1-B-6R8K--- to CDR1-B-9R1---*** CDR1-B-100K--- to CDR1-B-101K---*** CDR1-BP111K--- to CDR1-BP621---*** CDR1-BP681A--- to CDR1-BP102---*** Capacitance Range (pF) Capacitance Tolerance Available 0.1 pF to 0.2 pF 0.3 pF to 0.4 pF 0.5 pF to 2.2 pF 2.4 pF to 6.2 pF 6.8 pF to 9.1 pF 10 pF to 100 pF 110 pF to 620 pF 680 pF to 1000 pF B B, C B, C, D B, C, D B, C, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M Rated Temp. & Voltage-Temp Limits Rated DC Voltage Characteristic BG (+90 ±20 PPM/°C) and Characteristic BP (0 ±30 PPM/°C) A = 50 K = 150 BP A = 50 B = 100 TABLE II - STYLES CDR13 AND CDR14 CAPACITOR CHARACTERISTICS Type Designation * Capacitance Range (pF) Capacitance Tolerance Available CDR1-B-0R1EB-- to CDR1-B-0R2---B-CDR1-B-0R3E--- to CDR1-B-0R4--CDR1-B--0R5E--- to CDR1-B-2R2---** CDR1-B-2R4E--- to CDR1-B-6R2---*** CDR1-B-6R8E--- to CDR1-B-9R1---*** CDR1-B-100E--- to CDR1-B-101---*** CDR1-B-111D--- to CDR1-B-201---*** CDR1-B-221C--- to CDR1-B-471C---*** CDR1-B-511B--- to CDR1-B-621---*** CDR1-B-681A--- to CDR1-B-102A---*** CDR1-BP112A--- to CDR1-BP512A---*** 0.1 pF to 0.2 pF 0.3 pF to 0.4 pF 0.5 pF to 2.2 pF 2.4 pF to 6.2 pF 6.8 pF to 9.1 pF 10 pF to 100 pF 110 pF to 200 pF 220 pF to 470 pF 510 pF to 620 pF 680 pF to 1000 pF 1100 pF to 5100 pF B B, C B, C, D B, C, D B, C, J, K, M Rated Temp. & Voltage-Temp Limits "Characteristic BG (+90 ±20 PPM/°C) and Characteristic BP (0 ±30 PPM/°C)" F, G, J, K, M BP Rated DC Voltage C = 200 E = 500 C = 200 D = 300 C = 200 A = 50 B = 100 A = 50 * Complete type designation will include additional symbols to indicate style, voltage-temperature limits, capacitance tolerance (where applicable), termination finish, and failure rate level. ** Intermediate values in this category are in 0.1 pF steps. *** Intermediate values in each category are given by the RETMA 5% Table. 606 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 050721 F = ±1% M = ±20% RF/Microwave Multilayer Capacitors (MLC) CDR Series — MIL-PRF-55681/4/5 (RF/Microwave Chips) TABLE I - STYLES CDR11 AND CDR12 CAPACITOR CHARACTERISTICS Type Designation * CDR2-B-0R1EB-- to CDR2-B-0R2EB-CDR2-B-0R3E--- to CDR2-B-0R4E--CDR2-B--0R5E--- to CDR2-B-2R2E---** CDR2-B-2R4E--- to CDR2-B-6R2E---*** CDR2-B-6R8E--- to CDR2-B-9R1E---*** CDR21-B-100E--- to CDR2-B-101E---*** CDR2-B-111D--- to CDR2-B-201D---*** CDR2-B-221C--- to CDR2-B-471C---*** CDR2-B-511B--- to CDR2-B-621B---*** CDR2-B-681A--- to CDR2-B-102A---*** CDR2-BP112A--- to CDR2-BP512A---*** Capacitance Range (pF) Capacitance Tolerance Available 0.1 pF to 0.2 pF 0.3 pF to 0.4 pF 0.5 pF to 2.2 pF 2.4 pF to 6.2 pF 6.8 pF to 9.1 pF 10 pF to 100 pF 110 pF to 200 pF 220 pF to 470 pF 510 pF to 620 pF 680 pF to 1000 pF 1100 pF to 5100 pF B B, C B, C, D B, C, D B, C, J, K, M Rated Temp. & Voltage-Temp Limits Rated DC Voltage 500 = E Characteristic BG (+90 ±20 PPM/°C) and Characteristic BP (0 ±30 PPM/°C) 300 = D 200 = C 100 = B F, G, J, K, M 50 = A BP * Complete type designation will include additional symbols to indicate style, voltage-temperature limits, capacitance tolerance (where applicable), termination finish (T for styles CDR21, CDR22 and CDR24, and S for styles CDR23 and CDR25), and failure rate level. Please note: Leaded devices CDR 21 through CDR 25 are available to the R Failure Rate Level only. ** Intermediate values in this category are in 0.1 pF steps. *** Intermediate values in each category are given by the RETMA 5% Table as follows: 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91. TABLE I - STYLES CDR11 AND CDR12 CAPACITOR CHARACTERISTICS MIL-PRF-55681 Styles CDR 11 CDR 13 CDE 12 CDR 14 CDR 12 CDR 14 CDR 21 CDR 22 CDR 24 CDR 23 CDR 25 Case Size Type Outlines Body Dimensions Length Width Thickness A Chip CA B Chip CA A Pellet P B Pellet P A Solder Plate W .055 ±.015 (1.4 ±0.38) .020/.057 (0.51/1.45) B Solder Plate W .110 ±.020 (2.79 ±0.51) .030/.102 (0.76/2.59) B Microstrip MS B B B B .055 ±.015 (1.4 ±0.38) .110 ±.020 (2.79 ±0.51) W/T is a Termination Surface .055 ±.025 (1.4 ±0.63) .110 +.035 -.020 W/T is a (2.79 +0.89 -0.51) Termination Surface W/T is a Termination Surface .055 ±.015 (1.4 ±0.38) .110 ±.020 (2.79 ±0.51) .020/.057 (0.51/1.45) N = Gold Over Nickel Over Silver N is ATC’s UNI-TERM® .030/.102 (0.76/2.59) .020/.057 (0.51/1.45) S = Solder Coated, Final U = Solder Coated, Nickel Barrier U is .030/.102 ATC’s BARRIER//CAP® (0.76/2.59) W = Nickel Barrier, Solder Plate. Termination T = Silver Length Width Thickness min. Axial Ribbon AR Radial Ribbon RR Lead & Termination Dimensions & Materials .135 ±.015 (3.43 ±0.38) .110 ±.015 (2.79 ±0.38) .060/.100 (1.52/2.54) .250 (6.35) .093±.005 .004±.001 (2.36±0.13) (0.10±0.03) Radial Wire RW Terminations S = Solder Coated min. #26 AWG Axial Wire AW .50 (12.7) .016 (.375) dia. nom. All dimensions are in inches, except those in parentheses which are in millimeters. All leads and ribbon are silver and are attached with high temperature solder. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 050721 607 RF/Microwave Multilayer Capacitors (MLC) CDR Series — MIL-PRF-55681/4/5 (RF/Microwave Chips) Equiv. AVX Part No. Characteristics Style CDR11 CDR12 CDR13 CDR14 BP 100A 100A 100B 100B 700A 700A 700B 700B Equiv. AVX Part No. Characteristics Style CDR21 CDR22 CDR23 CDR24 CDR25 BG BG BP 100B ------ MS 100B ------ AR 100B ------ RW 100B ------ RR 100B ------ AW 700B ------ MS 700B ------ AR 700B ------ RW 700B ------ RR 700B ------ AW PACKAGING Standard Packaging Quantity CDR11-12 = 100 pcs per waffle pack CDR13-14 = 100 pcs per waffle pack TAPE & REEL All tape and reel specifications are in compliance with EIA RS481(equivalent to IEC 286 part 3). Sizes CDR11/12 through 13/14. — 8mm carrier — 7” reel: ≤0.040” thickness = 100, 300, 500, 1000, 2000* pcs ≤0.075” thickness = 100, 300, 500, 1000, 2000* pcs * QTY 2000 only applies to CDR11-12 608 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 050721 RF/Microwave Multilayer Capacitors (MLC) Performance Curves TYPICAL ESR vs. FREQUENCY MIL-PRF-55681E - BG TYPICAL Q vs. FREQUENCY MIL-PRF-55681E - BG 10000 1 1000 ESR (ohms) 0.1 Q 100 10 100 Frequency (MHz) 1 Picofarad AVX CORPORATION 10 Picofarad 0.01 1000 100 1000 Frequency (MHz) 100 Picofarad 3.3 Picofarad AVX CORPORATION 10 Picofarad 100 Picofarad TYPICAL ESR vs. CAPACITANCE MIL-PRF-55681E - BG TYPICAL Q vs. CAPACITANCE MIL-PRF-55681E - BG 1 10000 1000 ESR (ohms) 0.1 Q 100 10 1 10 0.01 1 100 250 MHz AVX CORPORATION 500 MHz 10 100 Capacitance (pF) Capacitance (pF) 250 MHz 1000 MHz AVX CORPORATION 500 MHz The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 040721 1000 MHz 609 RF/Microwave Multilayer Capacitors (MLC) Performance Curves TYPICAL Q vs. FREQUENCY MIL-PRF-55681E - BG TYPICAL ESR vs. FREQUENCY MIL-PRF-55681E - BG 10000 1 1000 Q ESR (ohms) 0.1 100 10 100 100 1000 Frequency (MHz) AVX CORPORATION 10 Picofarad 47 Picofarad 1 Picofarad 0.01 1000 Frequency (MHz) 330 Picofarad 1 Picofarad AVX CORPORATION 15 Picofarad 100 Picofarad TYPICAL ESR vs. CAPACITANCE MIL-PRF-55681E - BG TYPICAL Q vs. CAPACITANCE MIL-PRF-55681E - BG 10000 1 1000 Q ESR (ohms) 0.1 100 10 1 10 0.01 1 100 Capacitance (pF) 250 MHz 610 AVX CORPORATION 500 MHz 10 100 Capacitance (pF) 1000 MHz 250 MHz AVX CORPORATION 500 MHz 1000 MHz The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 040721 RF/Microwave Multilayer Capacitors (MLC) Performance Curves TYPICAL ESR vs. FREQUENCY MIL-PRF-55681E - BP TYPICAL Q vs. FREQUENCY MIL-PRF-55681E - BP 10000 1000 Q 100 10 100 1000 Frequency (MHz) 1 Picofarad AVX CORPORATION 15 Picofarad 100 Picofarad TYPICAL ESR vs. CAPACITANCE MIL-PRF-55681E - BP TYPICAL Q vs. CAPACITANCE MIL-PRF-55681E - BP 10000 1 1000 ESR (ohms) 0.1 Q 100 10 1 10 0.01 1 100 Capacitance (pF) 250 MHz AVX CORPORATION 500 MHz 10 100 Capacitance (pF) 1000 MHz 250 MHz AVX CORPORATION 500 MHz 1000 MHz The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 040721 611 RF/Microwave Multilayer Capacitors (MLC) Performance Curves 612 TYPICAL Q vs. FREQUENCY MIL-PRF-55681E - BP TYPICAL ESR vs. FREQUENCY MIL-PRF-55681E - BP TYPICAL Q vs. CAPACITANCE MIL-PRF-55681E - BP TYPICAL ESR vs. CAPACITANCE MIL-PRF-55681E - BP The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 040721 RF/Microwave Multilayer Capacitors (MLC) Performance Curves TYPICAL RESONANT FREQUENCY vs. CAPACITANCE AVX (CDR11-14) CDR 11/12 CDR 13/14 CDR 11/12 CDR 13/14 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 041621 613