CX2016DB48000C0WPLA2 数据手册
Specifications
Drawing No.
UKY1C-H1-14491-00[37] 1/10
Issued Date.
Apr,25,2014
TO: Digi-Key
Note:In case of specification change, KYOCERA Part Number also will be changed.
Product Name
Quartz Crystal
Product Model
CX2016DB
Frequency
48000kHz
Customer Part Number
-
Customer Specification Number
-
KYOCERA Part Number
CX2016DB48000C0WPLA2
Remarks
Pb-Free、RoHS Compliant、MSL 1
“NOT AEC-Q200 Qualified”
Qualified for Qualcomm Atheros QCA6174 & QCA9378 chipset
Customer Acceptance
Accept Signature
Approved Date
Department
Person in charge
Seller
KYOCERA Crystal Device Corporation
Manufacturer
(Crystal products Sales Division)
6 Takeda Tobadono-cho, Fushimi-ku, Kyoto
612-8501 Japan
TEL. No. 075-604-3500
FAX. No. 075-604-3501
Crystal Units Division
5850, Higashine-Koh, Higashine-Shi, Yamagata
999-3701 Japan
TEL. No. 0237-43-5611
FAX. No. 0237-43-5615
Design Department
Quality Assurance
Approved by
Checked by
Issued by
KYOCERA Crystal Device Corporation
Crystal Units Engineering Section
Crystal Units Division
A. Kikuchi
Y.Takahashi
T. Nitoube
Y. Kikuchi
KYOCERA Crystal Device Corporation
KBS-5079E
Drawing No.
UKY1C-H1-14491-00[37] 2/10
“NOT AEC-Q200 Qualified”
Revision History
Rev.No.
Description of revise
1
First Edition
Date
Approved by
Checked by
Issued by
Dec,25,2013
Y.Takahashi
T. Nitoube
Y. Kikuchi
KYOCERA Crystal Device Corporation
KBS-5079E
Drawing No.
UKY1C-H1-14491-00[37] 3/10
“NOT AEC-Q200 Qualified”
1. APPLICATION
This specification sheet is applied to quartz crystal “CX2016DB”
2. KYOCERA PART NUMBER
CX2016DB48000C0WPLA2
3. RATINGS
Items
Operating Temperature
Storage Temperature range
SYMB.
Topr
Tstg
Rating
-40 to +85
-40 to +85
Unit
°C
°C
Remarks
4. CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
Items
Electrical Specification
SYMB.
Min
Typ.
Max
Mode of Vibration
Fundamental
Test Condition
Unit
Nominal Frequency
F0
48
MHz
Nominal
Temperature
Load Capacitance
TNOM
+25
°C
CL
7.0
pF
Frequency drift
after reflow
Frequency Aging
Rate
Equivalent Series
Resistance
df/F
+20.0
PPM
After 2times
5 years
ESR
Shunt
Capacitance
C0
Insulation
Resistance
-40 to +85°C
-20.0
C1
Spurious mode
series resistance
Drive Level
+25±3°C
df/F
Motional
Capacitance
Motional
Inductance
Network Analyzer
E5100A
Saunders(S&A)
Network Analyzer
250B
8.79
Frequency
Tolerance
Frequency
Temperature
Characteristics
Remarks
L1
2.16
3.16
22
Ω
4.16
fF
0.51
0.71
0.91
0.64
0.84
1.04
1.00
3.49
4.00
1100
Pd
10
IR
500
pF
mH
Ω
100
+25±3°C
Network Analyzer
E5100A
Saunders(S&A)
Network Analyzer
250B
Network Analyzer
E5100A
Saunders(S&A)
Network Analyzer
250B
Network Analyzer
E5100A
Saunders(S&A)
Network Analyzer
250B
±700kHz
μW
MΩ
100V(DC)
KYOCERA Crystal Device Corporation
KBS-5079E
Drawing No.
UKY1C-H1-14491-00[37] 4/10
“NOT AEC-Q200 Qualified”
5. APPEARANCES, PHYSICAL DIMENSION
OUTLINE DIMENSION (not to scale)
1
(TOP VIEW)
2.00±0.10
#4
#4 GND
#3
GND
(NC)
1.60±0.10
48000
K401 Y
GND
#2
#1 HOT
#2 GND
4-R0.10
3
4
4-0.10
PIN
NO.
#1
#2
#3
#4
PIN Layout
HOT
GND
HOT
GND
4-0.57±0.10
#2
#1
4-0.49±0.10
2
0.15±0.025
0.40±0.05
#1
4-0.08
#3 HOT
C 0.20
UNIT: mm
#4
#3
MARKING
1 Nominal Frequency Move the number of maximum indication beams of the
frequency to five digits,and omit less than kHz.
2 Identification
[K] mark is surely 1Pin direction.
3 Date Code
Year…LAST 1 DIGIT of YEAR AND WEEK
(Ex)Jan,01, 2014 → 401
4 Manufacturing Location
Y…Yamagata
Z…Shiga Yohkaichi
T…Thailand
F…Philippines
※The font of marking is reference.
KYOCERA Crystal Device Corporation
KBS-5079E
Drawing No.
UKY1C-H1-14491-00[37] 5/10
“NOT AEC-Q200 Qualified”
6. RECOMMENDED LAND PATTERN (not to scale)
0.5
0.9
0.8
1.1
0.3
0.8
0.9
UNIT: mm
1.4
KYOCERA Crystal Device Corporation
KBS-5079E
Drawing No.
UKY1C-H1-14491-00[37] 6/10
“NOT AEC-Q200 Qualified”
7. TAPING&REEL
7-1.Dimensions
4.0±0.1
φ1.5± 0.1
0
Unreeling direction
1.75±0.1
2.0±0.05
2.35±0.10
2.30±0.05
3.5±0.05
1.95±0.1
4.0±0.1
0.7±0.05
1.90±0.1
0.2±0.05
8.0±0.2
φ1.05±0.05
7-2.Leader and trailer tape
Empty compartment
Empty compartment
Component
Leader
END
START
100~200mm
160mm or more
400~560mm
7-3.Direction(The direction shall be seen from the top cover tape side)
12345
K123 Y
12345
K123 Y
12345
K123 Y
12345
K123 Y
Unreeling direction
7-4.Specification
1. Material of the carrier tape shall be polystyrene or A-PET (ESD).
2. Material of the seal tape shall be polyester (ESD).
3. The seal tape shall not cover the sprocket holes. And not protrude from the carrier tape.
4. Tensile strength of the tape: 10N or more.
5. The R of the corner without designation is 0.2RMAX.
6. The alignment between centers of the cavity and sprocket hole shall be 0.05mm or less.
7. Cumulative pitch tolerance of “P0” shall be ±0.2mm at 10 pitches.
8. Suppose that it unifies as shown in the above-mentioned figure to the directivity of printing in an embossing tape.
9. Peeling force of the seal tape: 0.1 to 1.0N.
10. The component can fall headlong naturally from taping in the environment, such dry conditions, when this
components were transferred to, cover was removed and the component was moved upside down.
165°~180°
Cover tape
Career tape
KYOCERA Crystal Device Corporation
KBS-5079E
Drawing No.
UKY1C-H1-14491-00[37] 7/10
“NOT AEC-Q200 Qualified”
7-5.Reel Specification
t
W
C
D
E
B
A
In the case of φ180 Reel (3,000 pcs max, every 1,000 pcs)
Symbol
Dimension
Symbol
Dimension
A
B
C
D
φ180 +0/-3
φ60 +1/-0
φ13±0.2
φ21±0.8
E
W
t
2.0±0.5
9±1
2.0±0.5
(Unit : mm)
In the case of φ330 Reel (12,000 pcs max, every 1,000 pcs)
Symbol
Dimension
Symbol
Dimension
A
B
C
D
φ330±2.0
φ100±1.0
φ13±0.2
φ21±0.8
E
W
t
2.0±0.5
9.5±0.5
2.2±0.1
(Unit : mm)
KYOCERA Crystal Device Corporation
KBS-5079E
Drawing No.
UKY1C-H1-14491-00[37] 8/10
“NOT AEC-Q200 Qualified”
8.Enviromental requirements
After following test, frequency shall not change more than ±10×10-6
And CI,±20% or 5Ω of large value.
8.1 Resistance to Shock
Test condition
Natural dropped from height 100cm onto hard wood
board in 3 times
8.2 Resistance to Vibration
8.3 Resistance to Heat
Test condition
frequency
: 10 - 55 - 10 Hz
Amplitude
: 1.5mm
Cycle time
: 15 minutes
Direction
: X,Y,Z (3direction),2 h each.
Test condition
The quartz crystal unit shall be stored at a
temperature of +85±2°C for 500 h.
Then it shal be subjected to standard atmospheric
conditions for 1 h ,after whichi measurement shall
be made.
8.4 Resistance to Cold
Test condition
The quartz crystal unit shall be stored at a
temperature of -40±2°C for 500 h.
Then it shal be subjected to standard atmospheric
conditions for 1 h ,after whichi measurement shall
be made.
8.5 Thermal Shock
Test condition
The quartz crystal unit shall be subjected to 500
succesive change of temperature cycles ,each as
shown in table below,Then it shall be subjected
to standard atmospheric conditions for 1h,after
which measurements shall be made.
Cycle
:-40±2°C(30min.)to +25±2°C(5min.)
to +85±2°C(30min.)to +25±2°C(5min.)
KYOCERA Crystal Device Corporation
KBS-5079E
Drawing No.
UKY1C-H1-14491-00[37] 9/10
“NOT AEC-Q200 Qualified”
8.6 Resistance to Moisture
8.7 Soldering condition
Test condition
The quartz crystal unit shall be stored at a
temperature of +60±2°C wich relative humidity of
90% to 95% for 240 h. Then it shall be subjected
to standard atmospheric conditions for 1h,after
which measurements shall be made
1.) Material of solder
Kind … lead free solder paste
Melting point … +220±5°C
2.) Reflow temp.profile
Temp [°C]
Preheating
+150 to +180
Peak
+260±5
Total
―
Frequency shift : ±2ppm
3.) Hand Soldering +350°C 3 sec MAX
4.) Reflow Times
2 times
Time[sec]
150 (typ.)
10 (max.)
300 (max.)
Reflow temp.profile
8.8 Intensity for bending in circuit board
Solder this product in center of the circuit board of 40mm×100mm,
and add the deflection of 3mm as the bottom figure.
Test board : t=1.6mm
20
PUSH
1.6
board
10
R5
Product
45
45
R230
press jig
UNIT : mm
KYOCERA Crystal Device Corporation
KBS-5079E
Drawing No.
UKY1C-H1-14491-00[37] 10/10
“NOT AEC-Q200 Qualified”
9. Cautions for use
(1)Soldering in mounting
In case of Solder paste and conductive glue contact product lid or product side face exception for product
terminal it’s possible to influence product characteristics.
Please be careful above contents.
(2)Automatic mounting machine use
Please use after affirmation that select the mounting machine model with a shock small if possible in the
case of use of an automatic mounting machine, and it does not have breakage. There is a risk of a crystal
oscillating child's breakage occurring and not functioning normally by too much shock etc.
(3)Conformity of a circuit
In case of use of an oscillation circuit, please insert in a crystal oscillating child in series resistance 5 times
as many as the standard value of equivalent in-series resistance, and confirm oscillating. Please remove
resistance which inserted after the notes above-mentioned examination in the crystal oscillating child in
series, and use it.
10.Storage conditions
Storage at prolonged high temperature or low temperature and the storage by high humidity cause degradation
of frequency accuracy, and degradation of soldering nature. Storage is performed at the temperature of
+18 to +30°C, and the humidity of 20 to 70 % in the state of packing, and a term is 6 months.
11. Manufacturing location
Kyocera Crystal Device Corporation
Kyocera Crystal Device Corporation Shiga Yohkaichi Plant
Kyocera Crystal Device (Thailand) Co., Ltd
Kyocera Crystal Device Philippines, Inc.
12. Quality Assurance
Kyocera Crystal Device Quality Assurance Division
13. Quality guarantee
When the failure by the responsibility of our company occurs clearly after delivery within 1 year, a substitute
article etc. is appropriated gratuitously and this is guaranteed. However, when passing 1 year after delivery,
there is a case where I am allowed to consider as onerous repair after both consultation.
14. Others
(1) When any questions and opinions are in the written matter of these delivery specifications, I will ask
connection of you from the company issue day within 45 days. In a connection no case, a written matter is
consented to it and employed within a term.
(2) NOT AEC-Q200 Qualified. Please inquire your local Sales for AEC-Q200 Complied Product.
KYOCERA Crystal Device Corporation
KBS-5079E
CX2016DB48000C0WPLA2 价格&库存
很抱歉,暂时无法提供与“CX2016DB48000C0WPLA2”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 3000+3.452833000+0.43125