F380J476MSA

F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors FEATURES • Conductive polymer electrode • Benign failure mode under recommended use conditions • Compliant to the RoHS2 directive 2011/65/EU • SMD facedown • Small and low profile • High volumetric efficiency LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Smartphone • Tablet PC • Wireless module • Portable game • Bulk decoupling of SoC (System on chip) CASE DIMENSIONS: millimeters (inches) Code EIA Code EIA Metric L +0.20 -0.10 +0.008 -0.004 +0.20 -0.10 +0.008 -0.004 W1 M 0603 1608-09 1.60 (0.063 S 0805 2012-09 2.00 (0.079 U 0402 1106-06 1.10±0.05 (0.043±0.002) W2 H S1 S2 ) 0.65±0.10 (0.026±0.004) 0.80±0.10*1 (0.031±0.004) 0.50±0.10 (0.020±0.004) 0.60±0.10 (0.024±0.004) ) 0.90±0.10 (0.035±0.004) 0.80±0.10 (0.031±0.004) 0.50±0.10 (0.020±0.004) 1.00±0.10 (0.039±0.004) 0.60±0.05 (0.024±0.002) 0.35±0.05 (0.014±0.002) 0.55±0.05 (0.022±0.002) 0.30±0.05 (0.012±0.002) 0.50±0.05 (0.020±0.002) ) 0.85 (0.033 ) 1.25 (0.049 +0.20 -0.10 +0.008 -0.004 +0.20 -0.10 +0.008 -0.004 *1 F380J476MMAAXE: 1.0mm Max. L MARKING W1 H U CASE M CASE S CASE *Capacitance Code A W2 S1 S2 Rated Voltage Code S1 HOW TO ORDER F38 1A 225 Type Rated Voltage Js Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) M M Tolerance M = ±20% Case Size See table above Rated Voltage Code ⵧ ⵧⵧⵧⵧⵧ Packaging Special Code AXE = Rated temperature 60ºC and H dimension 1.0mm Max. AXEH3 = Rated temperature 60°C and H dimension 1.0mm Max., Low ESR LZT = Rated temperature 60ºC only AH1, AH2, AH3 = Low ESR Reel Dia (φ180) A Tape Width (mm) 8 TECHNICAL SPECIFICATIONS Category Temperature Range: Rated Temperature: Capacitance Tolerance: Dissipation Factor: ESR 100kHz: Leakage Current: -55 to +105°C +85°C (*2) ±20% at 120Hz Refer to next page (120Hz) Refer to next page (120Hz) Refer to next page At 20ºC after application of rated voltage for 5 minutes Provided that: After 5 minute’s application of rated voltage, leakage current at 105°C 10 times or less than 20ºC specified value. *2 F380J476MMAAXE: Rated temperature +60ºC Surge, endurance test temperature +60ºC 228 040919 F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance µF Code 4V (0G) 1.0 105 2.2 225 4.7 475 10 106 22 226 33 336 47 476 68 686 100 107 S** Rated Voltage 6.3V (0J) 10V (1A) U M U M M/M(AH1,AH2)/U M/M(AH1) M/M(AH3,AH1)/S/S(AH1) M*4/S M**/S S** M*4/M*4(H3)/S/S(AH1) S** S** S** 25V (1E) S *Cap Code A J S a j n s w A THE CORRELATIONS AMONG RATED VOLTAGE, SURGE VOLTAGE AND DERATED VOLTAGE F38 (Standard) 10 25 13 32 8 20 Rated Voltage (V) ≤85ºC 85ºC Surge Voltage (V) 105ºC Derated Voltage (V) 6.3 8 5 Rated Voltage (V) ≤60ºC 60ºC Surge Voltage (V) 85ºC Derated Voltage (V) 105ºC Derated Voltage (V) F38-LZT, F38-AXE 4 6.3 10 5.2 8 13 2.8 4.5 7.2 2 3.3 5 Released ratings, (Low ESR) *4 (AXE) Rated temperature 60℃ and H dimension 1.0mm Max only. Please contact AVX when you need detail spec. ** (LZT) Rated temperature 60ºC only. Please contact AVX when you need detail spec. Please contact to your local AVX sales office when these series are being designed in your application. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Size Capacitance (μF) Rated Voltage (V) DCL (μA) DF @ 120Hz (%) F380G107MSALZT S 100 4 80.0 10 F380J105MUA F380J475MUA F380J106MMA F380J106MMAAH1 F380J106MMAAH2 F380J106MUA F380J226MMA F380J226MMAAH3 F380J226MMAAH1 F380J226MSA F380J226MSAAH1 F380J336MMALZT F380J336MSA F380J476MMAAXE*4 F380J476MMAAXEH3 F380J476MSA F380J476MSAAH1 F380J686MSALZT F380J107MSALZT U U M M M U M M M S S M S M M S S S S 1 4.7 10 10 10 10 22 22 22 22 22 33 33 47 47 47 47 68 100 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 0.6 20.0 10.0 10.0 10.0 20.0 13.9 13.9 13.9 13.9 13.9 41.6 20.8 59.2 59.2 29.6 29.6 86.0 126.0 F381A225MMA F381A475MMA F381A106MMA F381A106MMAAH1 F381A226MMAAXE F381A226MSA F381A336MSALZT F381A476MSALZT M M M M M S S S 2.2 4.7 10 10 22 22 33 47 10 10 10 10 10 10 10 10 10.0 10.0 10.0 10.0 44.0 22.0 99.0 94.0 F381E475MSA S 4.7 25 11.8 ESR @ 100kHz (Ω) 45ºC 60ºC 100kHz RMS Current (mA) 85ºC 105ºC *1 ΔC/C (%) MSL 474 332 – 237 * 3 100 100 224 289 354 100 224 289 354 474 548 224 474 224 289 474 548 474 474 – – – – – – – – – – – 157 – 157 202 – – 332 332 70 70 157 202 247 70 157 202 247 332 383 – 332 – – 332 383 – – 50 50 112 144 177 50 112 144 177 237 274 112 237 112 144 237 274 237 237 * * * * * * * * * * * * * * * * * * * 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 224 224 224 289 224 474 474 474 – – – – 157 – 332 332 157 157 157 202 – 332 – – 112 112 112 144 112 237 237 237 * * * * * * * * 3 3 3 3 3 3 3 3 300 – 210 150 * 3 4 Volt *3: ΔC/C Marked “*” Item Damp Heat, steady state Rapid change of temperature Resistance soldering heat Surge Endurance 040919 200 6.3 Volt 6 1500 10 1500 8 500 8 300 8 200 10 1500 10 500 10 300 10 200 10 200 10 150 10 500 10 200 10 500 10 300 10 200 10 150 10 200 10 200 10 Volt 6 500 6 500 15 500 15 300 10 500 10 200 10 200 10 200 25 Volt 10 500 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All Case (%) -20 to +30 ±20 ±20 ±20 ±20 229 F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors RECOMMENDED DERATING FACTOR Voltage and temperature derating as percentage of Vr F38 LZT, AXE 100% 95% 90% 85% 80% 75% 70% 100% 100% Rated Voltage Rated Voltage 80% 80% Recommended Application Voltage for Vr ≤ 6.3V 80% Recommended Application Voltage for Vr ≥ 10V 60% Recommended Application Voltage 50% 72% 65% 40% 40% 64% 60% 20% 55% 50% -55ºC 85ºC 105ºC 0% -55ºC 0ºC 60ºC 105ºC QUALIFICATION TABLE TEST Damp Heat (Steady State) Temperature Cycles Resistance to Soldering Heat Surge Endurance Shear Test Terminal Strength F38 series (Temperature range -55ºC to +105ºC) Condition At 40°C, 90 to 95% R.H., 500 hours (No voltage applied) Capacitance Change ........... Refer to page 229 (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 300% or less of Initial specified value At -55°C / +105°C, 30 minutes each, 5 cycles Capacitance Change ........... Refer to page 229 (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 400% or less of initial specified value 5 seconds reflow at 260°C Capacitance Change ........... Refer to page 229 (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 300% or less of initial specified value After application of surge voltage in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC (*2), capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 229 (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 300% or less of initial specified value After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C (*2), capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 229 (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 400% or less of initial specified value After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. *2 F380J476MMAAXE: Rated temperature +60ºC Surge, endurance test temperature +60ºC NOTICE: DESIGN, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. 230 040919 F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONDUCTIVE POLYMER 040919 231