F381A475MMA

F38 Series – Miniature - Undertab F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors FEATURES • • • • • • • Conductive Polymer Electrode Benign Failure Mode Under Recommended Use Conditions Compliant to the RoHS3 directive 2015/863/EU SMD Facedown Small and Low Profile High Volumetric Efficiency 100% Surge Current Tested LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • • • • Smartphone Tablet PC Wireless Module Portable Game • Bulk Decoupling of SoC (System on Chip) CASE DIMENSIONS: millimeters (inches) Code Special Code EIA Code M M AXE S S H8Z U L EIA Metric 0603 1608-09 0603 1608-10 0805 2012-09 0805 2012-08 0402 1106-06 L W1 W2 H S1 S2 1.60 +0.20 -0.10 (0.063 +0.008 -0.004 ) 1.60 +0.20 -0.10 (0.063 +0.008 -0.004 ) +0.20 2.00 -0.10 (0.079 +0.008 -0.004 ) 2.00 +0.20 -0.10 (0.079 +0.008 -0.004 ) 1.10±0.05 (0.043±0.002) 0.85 +0.20 -0.10 (0.033 +0.008 -0.004 ) 0.85 +0.20 -0.10 (0.033 +0.008 -0.004 ) -0.10 1.25 +0.20 (0.049 +0.008 -0.004 ) 1.25 +0.20 -0.10 (0.049 +0.008 -0.004 ) 0.60±0.05 (0.024±0.002) 0.65±0.10 (0.026±0.004) 0.65±0.10 (0.026±0.004) 0.90±0.10 (0.035±0.004) 0.90±0.10 (0.035±0.004) 0.35±0.05 (0.014±0.002) 0.80±0.10 (0.031±0.004) 1.00 Max. (0.039 Max.) 0.80±0.10 (0.031±0.004) 0.80 Max. (0.031 Max.) 0.55±0.05 (0.022±0.002) 0.50±0.10 (0.020±0.004) 0.50±0.10 (0.020±0.004) 0.50±0.10 (0.020±0.004) 0.50±0.10 (0.020±0.004) 0.30±0.05 (0.012±0.002) 0.60±0.10 (0.024±0.004) 0.60±0.10 (0.024±0.004) 1.00±0.10 (0.039±0.004) 1.00±0.10 (0.039±0.004) 0.50±0.05 (0.020±0.002) MARKING W1 U CASE H M CASE S CASE *Capacitance Code A W2 S1 S2 Js Rated Voltage Code S1 Rated Voltage Code HOW TO ORDER F38 1A 225 M M Type Rated Voltage Capacitance Code Tolerance Case Size M=±20% pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) See table above Packaging Reel Dia (φ180) A Tape Width (mm) 8 TECHNICAL SPECIFICATIONS Category Temperature Range: -55 to +105°C Rated Range: +85°C or +60°C (*2) Capacitance Tolerance: ±20% at 120Hz Dissipation Factor: Refer to next page (120Hz) ESR 100kHz: Refer to next page (120Hz) Leaking Current: Refer to next page Special Code AXE = Rated temperature 60°C and H dimension 1.0mm Max. AXEH3 = Rated temperature 60°C and H dimension 1.0mm Max., Low ESR LZT = Rated temperature 60°C LZTH1 = Rated temperature 60°C, Low ESR AH1, AH2, Low ESR AH3 = H8Z = H dimension 0.8mm Max. At 20ºC after application of rated voltage for 5 minutes Provided that: After 5 minute’s application of rated voltage, leakage current at 105°C 10 times or less than 20ºC specified value. Termination Finish: M, S case: Gold Plating (standard), U case: Sn Plating (standard) *2 LZT and AXE: Rated temperature +60°C, Surge and Endurance test temperature +60°C 224 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0005 | Rev 1 – polymer, tantalum and niobium oxide capacitors – F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 1.0 2.2 3.3 4.7 10 105 225 335 475 106 22 226 33 336 47 476 68 100 686 107 4V (0G) Rated Voltage 8V 10V (0K) (1A) 6.3V (0J) U S** U M/M(AH1,AH2)/S/U M/M(AH3,AH1)/S/ S(AH1) M**/S M*4/M*4(H3)/S/ S(AH1)/S*** S** S**/S**(H1) 16V (1C) 25V (1E) M M M/S M/M(AH1)/S S S 30V (1S) 35V (1V) 38V (1X) S S S THE CORRELATIONS AMONG RATED VOLTAGE, SURGE VOLTAGE AND DERATED VOLTAGE *Cap Code A J N S a M*4/S j S*** S** n S S** Rated Voltage (V) ≤85°C 85°C Surge Voltage (V) 105°C Derated Voltage (V) 6.3 8 5 F38 (Standard) 8 10 6.3 10 13 8 16 21 13 25 32 20 30 35 39 46 24 28 38 49 30 F38-LZT, F38-AXE Rated Voltage (V) ≤60°C 60°C Surge Voltage (V) 85°C Derated Voltage (V) 105°C Derated Voltage (V) s w A 4 5.2 2.8 2 6.3 8 4.5 3.3 10 13 7.2 5 Released ratings, (Low ESR) Engineering Samples - Please Contact KYOCERA AVX *4 (AXE) Rated temperature 60ºC and H dimension 1.0mm Max. Please contact KYOCERA AVX when you need detail spec. ** (LZT) Rated temperature 60ºC. Please contact KYOCERA AVX when you need detail spec. *** (H8Z) H dimension 0.8mm Max. Please contact to your local KYOCERA AVX sales office when these series are being designed in your application. RATINGS & PART NUMBER REFERENCE Capacitance Rated (µF) Voltage (V) Part Number Case Size DCL (µA) F380G107MSALZT S 100 4 80.0 F380J105MUA F380J475MUA F380J106MMA F380J106MMAAH1 F380J106MMAAH2 F380J106MSA F380J106MUA F380J226MMA F380J226MMAAH3 F380J226MMAAH1 F380J226MSA F380J226MSAAH1 F380J336MMALZT F380J336MSA F380J476MMAAXE F380J476MMAAXEH3 F380J476MSA F380J476MSAAH1 F380J476MSAH8Z F380J686MSALZT F380J107MSALZT F380J107MSALZTH1 U U M M M S U M M M S S M S M M S S S S S S 1 4.7 10 10 10 10 10 22 22 22 22 22 33 33 47 47 47 47 47 68 100 100 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 0.6 20.0 10.0 10.0 10.0 6.3 20.0 13.9 13.9 13.9 13.9 13.9 41.6 20.8 59.2 59.2 29.6 29.6 29.6 86.0 126.0 126.0 F380K336MSAH8Z F380K476MSA S S 33 47 8 8 26.4 37.6 F381A225MMA F381A475MMA F381A475MSA F381A106MMA F381A106MMAAH1 F381A106MSA F381A226MMAAXE F381A226MSA F381A336MSALZT F381A476MSALZT M M S M M S M S S S 2.2 4.7 4.7 10 10 10 22 22 33 47 10 10 10 10 10 10 10 10 10 10 10.0 10.0 4.7 10.0 10.0 10.0 44.0 22.0 99.0 94.0 F381C106MSA S 10 16 16.0 DF @ 120Hz (%) 4 Volt ESR @ 100kHz (mΩ) 100kHz RMS Current (mA) 45°C 60°C 85°C 105°C *3 ΔC/C (%) MSL 10 200 474 332 – 237 * 3 6 10 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1500 1500 500 300 200 250 1500 500 300 200 200 150 500 200 500 300 200 150 200 200 200 150 100 100 224 289 354 424 100 224 289 354 474 548 224 474 224 289 474 548 474 474 474 548 – – – – – – – – – – – – 157 – 157 202 – – – 332 332 383 70 70 157 202 247 297 70 157 202 247 332 383 – 332 – – 332 383 332 – – – 50 50 112 144 177 212 50 112 144 177 237 274 112 237 112 144 237 274 237 237 237 274 * * * * * * * * * * * * * * * * * * * * * * 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 10 10 200 200 474 474 – – 332 332 237 237 * * 3 3 6 6 10 15 15 6 10 10 10 10 500 500 300 500 300 200 500 200 200 200 224 224 387 224 289 474 224 474 474 474 – – – – – – 157 – 332 332 157 157 271 157 202 332 – 332 – – 112 112 194 112 144 237 112 237 237 237 * * * * * * * * * * 3 3 3 3 3 3 3 3 3 3 10 500 300 - 210 150 * 3 6.3 Volt 8 Volt 10 Volt 16 Volt *3: ΔC/C Marked “*” Moisture Sensitivity Level (MSL) is defined according to J-STD-020 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0005 | Rev 1 – polymer, tantalum and niobium oxide capacitors – 225 F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors Capacitance Rated (µF) Voltage (V) Part Number Case Size DCL (µA) F381E225MMA F381E475MSA M S 2.2 4.7 25 25 10.0 11.8 F381S475MSA S 4.7 30 14.1 F381V335MSA S 3.3 35 11.6 F381X105MSA S 1 38 3.8 DF @ 120Hz (%) 25 Volt ESR @ 100kHz (mΩ) 100kHz RMS Current (mA) 45°C 60°C 85°C 105°C *3 ΔC/C (%) MSL 10 10 500 500 224 300 – – 157 210 112 150 * * 3 3 10 500 300 – 210 150 * 3 10 500 300 - 210 150 * 3 10 500 300 - 210 150 * 3 30 Volt 35 Volt 38 Volt *3: ΔC/C Marked “*” Moisture Sensitivity Level (MSL) is defined according to J-STD-020 Item Damp Heat, steady state Rapid change of temperature Resistance soldering heat Surge Endurance All Case (%) -20 to +30 ±20 ±20 ±20 ±20 RECOMMENDED DEREATING FACTOR Voltage and temperature derating as percentge of Vr 100% 95% 90% 85% 80% 75% 70% F38 LZT, AXE 100% Rated Voltage 80% Recommended Applications Voltage for Vr ≤6.3V Recommended Applications Voltage for Vr ≥8V 65% 80% 100% Rated Voltage 80% Recommended Applications Voltage 60% 50% 72% 40% 40% 64% 60% 20% 55% 50% -55°C 85°C 0% 105°C -55°C 0°C 60°C 105°C QUALIFICATION TABLE TEST Damp Heat (Steady State) Temperature Cycles Resistance to Soldering Heat Surge Endurance Shear Test Terminal Strength F38 series (Temperature Range -55ºC to +105ºC) Condition At 40°C, 90 to 95% R.H., 500 hours (No voltage applied) Capacitance Change ........... Refer to the table above (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 300% or less of Initial specified value At -55°C / +105°C, 30 minutes each, 5 cycles Capacitance Change ........... Refer to the table above (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 400% or less of initial specified value 5 seconds reflow at 260°C Capacitance Change ........... Refer to the table above (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 300% or less of initial specified value After application of surge voltage in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC or 60°C (*2), capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to the table above (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 300% or less of initial specified value After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C or 60°C (*2), capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to the table above (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 400% or less of initial specified value After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. *2 LZT and AXE: Rated temperature 60°C, Surge and Endurance test temperature 60°C 226 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0005 | Rev 1 – polymer, tantalum and niobium oxide capacitors – F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP : Conductive Polymer The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0005 | Rev 1 – polymer, tantalum and niobium oxide capacitors – 227