F930J227MBA

F93 Series Resin-Molded Chip, Standard Tantalum J-Lead FEATURES • Compliant to the RoHS2 directive 2011/65/EU • SMD J-lead LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Low power DC/DC CASE DIMENSIONS: millimeters (inches) 1206 3216-18 B 1210 3528-21 C 2312 6032-27 N 2917 7343-30 A, B CASE W1 1.60 ± 0.20 (0.063 ± 0.008) 2.80 ± 0.20 (0.110 ± 0.008) 3.20 ± 0.20 (0.126 ± 0.008) 4.30 ± 0.20 (0.169 ± 0.008) W2 1.20 ± 0.10 (0.047 ± 0.004) 2.20 ± 0.10 (0.087 ± 0.004) 2.20 ± 0.10 (0.087 ± 0.004) 2.40 ± 0.10 (0.094 ± 0.004) C, N CASE H 1.60 ± 0.20 (0.063 ± 0.008) 1.90 ± 0.20 (0.075 ± 0.008) 2.50 ± 0.20 (0.098 ± 0.008) 2.80 ± 0.20 (0.110 ±0.008) MARKING A CASE Capacitance Code B CASE C CASE Capacitance (μF) Capacitance (μF) 22 16V C 685 Rated Voltage Code 4V 6.3V 10V 16V HOW TO ORDER F93 1A 106 Type Rated Voltage Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) S 0.80 ± 0.20 (0.031 ± 0.008) 0.80 ± 0.20 (0.031 ± 0.008) 1.30 ± 0.20 (0.051 ± 0.008) 1.30 ± 0.20 (0.051 ± 0.008) G J A C Rated Voltage (V) 20V 25V 35V Rated Voltage (V) N CASE Capacitance (μF) 100 16V A L 3.20 ± 0.20 (0.126 ± 0.008) 3.50 ± 0.20 (0.126 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 7.30 ± 0.20 (0.287 ± 0.008) 47 16V Code EIA Code EIA Metric Rated Voltage (V) D E V M A ⵧ Tolerance K = ±10% M = ±20% Case Size See table above Packaging See Tape & Reel Packaging Section TECHNICAL SPECIFICATIONS Category Temperature Range: Rated Temperature: Capacitance Tolerance: Dissipation Factor: ESR 100kHz: Leakage Current: Capacitance Change By Temperature 30 -55 to +125°C +85°C ±20%, ±10% at 120Hz Refer to next page Refer to next page After 1 minute’s application of rated voltage, leakage current at 20°C is not more than 0.01CV or 0.5μA, whichever is greater. After 1 minute’s application of rated voltage, leakage current at 85°C is not more than 0.1CV or 5μA, whichever is greater. After 1 minute’s application of derated voltage, leakage current at 125°C is not more than 0.125CV or 6.3μA, whichever is greater. +15% Max. at +125°C +10% Max. at +85°C -10% Max. at -55°C 122017 F93 Series Resin-Molded Chip, Standard Tantalum J-Lead CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 0.68 684 1.0 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 220 227 330 337 470 447 680 687 Released ratings 122017 4V (0G) A A A A A/B B B/C C N N 6.3V (0J) A A A A A/B A/B A/B/C B/C B/C/N N N Rated Voltage 10V (1A) 16V (1C) A A A A A/B A/B A/B/C B/C B/C/N C/N C/N N A A A A A A A/B A/B A/B/C B/C B/C/N C/N C/N N N 20V (1D) A A A/B A/B A/B C B/C C/N C/N 25V (1E) A A A A A/B B/C C C/N N N 35V (1V) A A A A/B B B/C C C N N N Please contact to your local AVX sales office when these series are being designed in your application. 31 F93 Series Resin-Molded Chip, Standard Tantalum J-Lead RATINGS & PART NUMBER REFERENCE AVX Part No. Rated Case Capacitance Voltage Size (μF) (V) F930G226MAA F930G336MAA F930G476MAA F930G686MAA F930G107MAA F930G107MBA F930G157MBA F930G227MBA F930G227MCC F930G337MCC F930G477MNC F930G687MNC A A A A A B B B C C N N 22 33 47 68 100 100 150 220 220 330 470 680 F930J106MAA F930J156MAA F930J226MAA F930J336MAA F930J476MAA F930J476MBA F930J686MAA F930J686MBA F930J107MAA F930J107MBA F930J107MCC F930J157MBA F930J157MCC F930J227MBA F930J227MCC F930J227MNC F930J337MNC F930J477MNC A A A A A B A B A B C B C B C N N N 10 15 22 33 47 47 68 68 100 100 100 150 150 220 220 220 330 470 F931A475MAA F931A685MAA F931A106MAA F931A156MAA F931A226MAA F931A226MBA F931A336MAA F931A336MBA F931A476MAA F931A476MBA F931A476MCC F931A686MBA F931A686MCC F931A107MBA F931A107MCC F931A107MNC F931A157MCC F931A157MNC F931A227MCC F931A227MNC F931A337MNC A A A A A B A B A B C B C B C N C N C N N 4.7 6.8 10 15 22 22 33 33 47 47 47 68 68 100 100 100 150 150 220 220 330 F931C105MAA F931C155MAA F931C225MAA F931C335MAA F931C475MAA F931C685MAA A A A A A A 1 1.5 2.2 3.3 4.7 6.8 DCL (μA) 4 Volt 4 0.9 4 1.3 4 1.9 4 2.7 4 4.0 4 4.0 4 6.0 4 8.8 4 8.8 4 13.2 4 18.8 4 27.2 6.3 Volt 6.3 0.6 6.3 0.9 6.3 1.4 6.3 2.1 6.3 3.0 6.3 3.0 6.3 4.3 6.3 4.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 9.5 6.3 9.5 6.3 13.9 6.3 13.9 6.3 13.9 6.3 20.8 6.3 29.6 10 Volt 10 0.5 10 0.7 10 1.0 10 1.5 10 2.2 10 2.2 10 3.3 10 3.3 10 4.7 10 4.7 10 4.7 10 6.8 10 6.8 10 10.0 10 10.0 10 10.0 10 15.0 10 15.0 10 22.0 10 22.0 10 33.0 16 Volt 16 0.5 16 0.5 16 0.5 16 0.5 16 0.8 16 1.1 DF @ 120Hz (%) ESR @ 100kHz (Ω) *1 ΔC/C (%) MSL 6 8 18 24 30 14 16 18 12 14 16 18 2.5 2.5 2.5 2.5 2.0 0.9 0.7 0.7 0.7 0.7 0.3 0.3 * * * * * * * * * * * * 1 1 1 1 1 1 1 1 1 1 1 1 6 6 8 8 18 6 20 8 35 14 8 18 12 30 14 10 14 16 3.0 2.9 2.5 2.5 2.5 1.0 2.0 1.0 2.0 0.9 0.7 0.9 0.7 1.2 0.7 0.5 0.5 0.3 * * * * * * * * ±15 * * * * ±15 * * * * 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 6 6 6 8 12 6 18 8 40 8 6 12 8 18 10 8 14 10 40 12 18 4.0 3.5 3.0 2.9 2.5 1.9 2.5 1.4 2.0 1.0 0.9 0.9 0.8 1.2 0.7 0.6 0.7 0.6 0.9 0.5 0.5 * * * * * * * * ±15 * * ±15 * ±15 * * * * ±15 * * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 3 1 4 4 4 4 6 6 7.5 6.0 5.0 4.5 4.0 3.5 * * * * * * 1 1 1 1 1 1 *1: ΔC/C Marked “*” Item Damp Heat Temperature cycles Resistance soldering heat Surge Endurance 32 All Case (%) ±10 ±5 ±5 ±5 ±10 AVX Part No. Rated Case Capacitance Voltage Size (μF) (V) F931C106MAA F931C106MBA F931C156MAA F931C156MBA F931C226MAA F931C226MBA F931C226MCC F931C336MBA F931C336MCC F931C476MBA F931C476MCC F931C476MNC F931C686MCC F931C686MNC F931C107MCC F931C107MNC F931C157MNC F931C227MNC A B A B A B C B C B C N C N C N N N 10 10 15 15 22 22 22 33 33 47 47 47 68 68 100 100 150 220 F931D225MAA F931D335MAA F931D475MAA F931D475MBA F931D685MAA F931D685MBA F931D106MAA F931D106MBA F931D156MCC F931D226MBA F931D226MCC F931D336MCC F931D336MNC F931D476MCC F931D476MNC A A A B A B A B C B C C N C N 2.2 3.3 4.7 4.7 6.8 6.8 10 10 15 22 22 33 33 47 47 F931E105MAA F931E155MAA F931E225MAA F931E335MAA F931E475MAA F931E475MBA F931E106MBA F931E106MCC F931E156MCC F931E226MCC F931E226MNC F931E336MNC F931E476MNC A A A A A B B C C C N N N 1 1.5 2.2 3.3 4.7 4.7 10 10 15 22 22 33 47 F931V684MAA F931V105MAA F931V155MAA F931V225MAA F931V225MBA F931V335MBA F931V475MBA F931V475MCC F931V685MCC F931V106MCC F931V156MNC F931V226MNC F931V336MNC A A A A B B B C C C N N N 0.68 1 1.5 2.2 2.2 3.3 4.7 4.7 6.8 10 15 22 33 DCL (μA) 16 1.6 16 1.6 16 2.4 16 2.4 16 3.5 16 3.5 16 3.5 16 5.3 16 5.3 16 7.5 16 7.5 16 7.5 16 10.9 16 10.9 16 16.0 16 16.0 16 24.0 16 35.2 20 Volt 20 0.5 20 0.7 20 0.9 20 0.9 20 1.4 20 1.4 20 2.0 20 2.0 20 3.0 20 4.4 20 4.4 20 6.6 20 6.6 20 9.4 20 9.4 25 Volt 25 0.5 25 0.5 25 0.6 25 0.8 25 1.2 25 1.2 25 2.5 25 2.5 25 3.8 25 5.5 25 5.5 25 8.3 25 11.8 35 Volt 35 0.5 35 0.5 35 0.5 35 0.8 35 0.8 35 1.2 35 1.6 35 1.6 35 2.4 35 3.5 35 5.3 35 7.7 35 11.6 DF @ 120Hz (%) ESR @ 100kHz (Ω) *1 ΔC/C (%) MSL 6 6 10 6 15 8 6 8 6 16 8 6 10 6 15 10 15 25 3.0 2.0 3.0 2.0 3.0 1.9 1.1 1.9 1.1 2.0 0.9 0.7 0.8 0.6 0.7 0.6 0.6 0.7 * * * * ±15 * * * * ±15 * * ±10 * ±10 * * ±10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 3 4 4 6 6 6 6 8 6 6 8 8 8 6 10 8 5.0 4.5 3.0 2.8 3.5 2.5 3.5 2.1 1.2 1.9 1.1 1.1 0.7 1.1 0.7 * * * * * * * * * * * * * * * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 6 6 8 6 12 6 8 8 6 8 8 7.5 6.7 6.3 6.0 4.0 2.8 1.9 1.5 1.2 1.1 0.7 0.7 0.7 * * * * * * * * * * * * * 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 6 6 4 4 8 6 6 6 6 8 8 7.6 7.5 7.5 7.0 3.8 3.5 3.1 1.8 1.8 1.6 0.7 0.7 0.7 * * * * * * * * * * * * * 1 1 1 1 1 1 1 1 1 1 1 1 1 * In case of capacitance tolerance ± 10% type, “K” will be put at 9th digit of type numbering system Moisture Sensitivity Level (MSL) is defined according to J-STD-020. 122017 F93 Series Resin-Molded Chip, Standard Tantalum J-Lead QUALIFICATION TABLE TEST Damp Heat (Steady State) Temperature Cycles Resistance to Soldering Heat Surge Endurance Shear Test Terminal Strength Failure Rate F93 series (Temperature range -55ºC to +125ºC) Condition At 40°C, 90 to 95% R.H., 500 hours (No voltage applied) Capacitance Change ........... Refer to page 32 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less -55°C / +125°C, 30 minutes each, 5 cycles Capacitance Change ........... Refer to page 32 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less 10 seconds reflow at 260°C, 5 seconds immersion at 260°C. Capacitance Change ........... Refer to page 32 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 32 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After 2000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C, or derated voltage in series with a 3Ω resistor at 125°C, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 32 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level. We can supply the type of compliance to AEC-Q200. Please contact to your local AVX sales office when these series are being designed in your application. 122017 33 F93 Series Resin-Molded Chip, Standard Tantalum J-Lead AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONVENTIONAL SMD MnO2 34 122017