F931C106MBA

F93 Series Resin-Molded Chip, Standard Tantalum J-Lead FEATURES • Compliant to the RoHS2 directive 2011/65/EU • SMD J-lead LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Low power DC/DC CASE DIMENSIONS: millimeters (inches) 1206 3216-18 B 1210 3528-21 C 2312 6032-27 N 2917 7343-30 A, B CASE W1 1.60 ± 0.20 (0.063 ± 0.008) 2.80 ± 0.20 (0.110 ± 0.008) 3.20 ± 0.20 (0.126 ± 0.008) 4.30 ± 0.20 (0.169 ± 0.008) W2 1.20 ± 0.10 (0.047 ± 0.004) 2.20 ± 0.10 (0.087 ± 0.004) 2.20 ± 0.10 (0.087 ± 0.004) 2.40 ± 0.10 (0.094 ± 0.004) C, N CASE H 1.60 ± 0.20 (0.063 ± 0.008) 1.90 ± 0.20 (0.075 ± 0.008) 2.50 ± 0.20 (0.098 ± 0.008) 2.80 ± 0.20 (0.110 ±0.008) MARKING A CASE Capacitance Code B CASE C CASE Capacitance (µF) Capacitance (µF) 22 16V C 685 Rated Voltage Code 4V 6.3V 10V 16V HOW TO ORDER F93 1A 106 Type Rated Voltage Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) S 0.80 ± 0.20 (0.031 ± 0.008) 0.80 ± 0.20 (0.031 ± 0.008) 1.30 ± 0.20 (0.051 ± 0.008) 1.30 ± 0.20 (0.051 ± 0.008) G J A C Rated Voltage (V) 20V 25V 35V Rated Voltage (V) N CASE Capacitance (µF) 100 16V A L 3.20 ± 0.20 (0.126 ± 0.008) 3.50 ± 0.20 (0.126 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 7.30 ± 0.20 (0.287 ± 0.008) 47 16V Code EIA Code EIA Metric Rated Voltage (V) D E V M A ⵧ Tolerance K = ±10% M = ±20% Case Size See table above Packaging See Tape & Reel Packaging Section TECHNICAL SPECIFICATIONS Category Temperature Range: Rated Temperature: Capacitance Tolerance: Dissipation Factor: ESR 100kHz: Leakage Current: Capacitance Change By Temperature 30 -55 to +125°C +85°C ±20%, ±10% at 120Hz Refer to next page Refer to next page After 1 minute’s application of rated voltage, leakage current at 20°C is not more than 0.01CV or 0.5μA, whichever is greater. After 1 minute’s application of rated voltage, leakage current at 85°C is not more than 0.1CV or 5μA, whichever is greater. After 1 minute’s application of derated voltage, leakage current at 125°C is not more than 0.125CV or 6.3μA, whichever is greater. +15% Max. at +125°C +10% Max. at +85°C -10% Max. at -55°C 062718 F93 Series Resin-Molded Chip, Standard Tantalum J-Lead CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance µF Code 0.33 334 0.47 474 0.68 684 1.0 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 220 227 330 337 470 447 680 687 Released ratings 062718 4V (0G) A A A A A/B B B/C C N N 6.3V (0J) A A A A A/B A/B A/B/C B/C B/C/N N N Rated Voltage 10V (1A) 16V (1C) A A A A A/B A/B A/B/C B/C B/C/N C/N C/N N A A A A A A A/B A/B A/B/C B/C B/C/N C/N C/N N N 20V (1D) A A A/B A/B A/B C B/C C/N C/N 25V (1E) A A A A A/B B/C C C/N N N 35V (1V) A A A A A A/B B B/C C C N N N Please contact to your local AVX sales office when these series are being designed in your application. 31 F93 Series Resin-Molded Chip, Standard Tantalum J-Lead RATINGS & PART NUMBER REFERENCE AVX Part No. Rated Case Capacitance Voltage Size (μF) (V) F930G226#AA F930G336#AA F930G476#AA F930G686#AA F930G107#AA F930G107#BA F930G157#BA F930G227#BA F930G227#CC F930G337#CC F930G477#NC F930G687#NC A A A A A B B B C C N N 22 33 47 68 100 100 150 220 220 330 470 680 F930J106#AA F930J156#AA F930J226#AA F930J336#AA F930J476#AA F930J476#BA F930J686#AA F930J686#BA F930J107#AA F930J107#BA F930J107#CC F930J157#BA F930J157#CC F930J227#BA F930J227#CC F930J227#NC F930J337#NC F930J477#NC A A A A A B A B A B C B C B C N N N 10 15 22 33 47 47 68 68 100 100 100 150 150 220 220 220 330 470 F931A475#AA F931A685#AA F931A106#AA F931A156#AA F931A226#AA F931A226#BA F931A336#AA F931A336#BA F931A476#AA F931A476#BA F931A476#CC F931A686#BA F931A686#CC F931A107#BA F931A107#CC F931A107#NC F931A157#CC F931A157#NC F931A227#CC F931A227#NC F931A337#NC A A A A A B A B A B C B C B C N C N C N N 4.7 6.8 10 15 22 22 33 33 47 47 47 68 68 100 100 100 150 150 220 220 330 F931C105#AA F931C155#AA F931C225#AA F931C335#AA F931C475#AA F931C685#AA A A A A A A 1 1.5 2.2 3.3 4.7 6.8 DCL (μA) 4 Volt 4 0.9 4 1.3 4 1.9 4 2.7 4 4.0 4 4.0 4 6.0 4 8.8 4 8.8 4 13.2 4 18.8 4 27.2 6.3 Volt 6.3 0.6 6.3 0.9 6.3 1.4 6.3 2.1 6.3 3.0 6.3 3.0 6.3 4.3 6.3 4.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 9.5 6.3 9.5 6.3 13.9 6.3 13.9 6.3 13.9 6.3 20.8 6.3 29.6 10 Volt 10 0.5 10 0.7 10 1.0 10 1.5 10 2.2 10 2.2 10 3.3 10 3.3 10 4.7 10 4.7 10 4.7 10 6.8 10 6.8 10 10.0 10 10.0 10 10.0 10 15.0 10 15.0 10 22.0 10 22.0 10 33.0 16 Volt 16 0.5 16 0.5 16 0.5 16 0.5 16 0.8 16 1.1 DF @ 120Hz (%) ESR @ 100kHz (Ω) *1 ΔC/C (%) MSL 6 8 18 24 30 14 16 18 12 14 16 18 2.5 2.5 2.5 2.5 2.0 0.9 0.7 0.7 0.7 0.7 0.3 0.3 * * * * * * * * * * * * 1 1 1 1 1 1 1 1 1 1 1 1 6 6 8 8 18 6 20 8 35 14 8 18 12 30 14 10 14 16 3.0 2.9 2.5 2.5 2.5 1.0 2.0 1.0 2.0 0.9 0.7 0.9 0.7 1.2 0.7 0.5 0.5 0.3 * * * * * * * * ±15 * * * * ±15 * * * * 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 6 6 6 8 12 6 18 8 40 8 6 12 8 18 10 8 14 10 40 12 18 4.0 3.5 3.0 2.9 2.5 1.9 2.5 1.4 2.0 1.0 0.9 0.9 0.8 1.2 0.7 0.6 0.7 0.6 0.9 0.5 0.5 * * * * * * * * ±15 * * ±15 * ±15 * * * * ±15 * * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 3 1 4 4 4 4 6 6 7.5 6.0 5.0 4.5 4.0 3.5 * * * * * * 1 1 1 1 1 1 *1: ΔC/C Marked “*” Item Damp Heat Temperature cycles Resistance soldering heat Surge Endurance 32 All Case (%) ±10 ±5 ±5 ±5 ±10 AVX Part No. Rated Case Capacitance Voltage Size (μF) (V) F931C106#AA F931C106#BA F931C156#AA F931C156#BA F931C226#AA F931C226#BA F931C226#CC F931C336#BA F931C336#CC F931C476#BA F931C476#CC F931C476#NC F931C686#CC F931C686#NC F931C107#CC F931C107#NC F931C157#NC F931C227#NC A B A B A B C B C B C N C N C N N N 10 10 15 15 22 22 22 33 33 47 47 47 68 68 100 100 150 220 F931D225#AA F931D335#AA F931D475#AA F931D475#BA F931D685#AA F931D685#BA F931D106#AA F931D106#BA F931D156#CC F931D226#BA F931D226#CC F931D336#CC F931D336#NC F931D476#CC F931D476#NC A A A B A B A B C B C C N C N 2.2 3.3 4.7 4.7 6.8 6.8 10 10 15 22 22 33 33 47 47 F931E105#AA F931E155#AA F931E225#AA F931E335#AA F931E475#AA F931E475#BA F931E106#BA F931E106#CC F931E156#CC F931E226#CC F931E226#NC F931E336#NC F931E476#NC A A A A A B B C C C N N N 1 1.5 2.2 3.3 4.7 4.7 10 10 15 22 22 33 47 F931V334#AA F931V474#AA F931V684#AA F931V105#AA F931V155#AA F931V225#AA F931V225#BA F931V335#BA F931V475#BA F931V475#CC F931V685#CC F931V106#CC F931V156#NC F931V226#NC F931V336#NC A A A A A A B B B C C C N N N 0.33 0.47 0.68 1 1.5 2.2 2.2 3.3 4.7 4.7 6.8 10 15 22 33 DCL (μA) 16 1.6 16 1.6 16 2.4 16 2.4 16 3.5 16 3.5 16 3.5 16 5.3 16 5.3 16 7.5 16 7.5 16 7.5 16 10.9 16 10.9 16 16.0 16 16.0 16 24.0 16 35.2 20 Volt 20 0.5 20 0.7 20 0.9 20 0.9 20 1.4 20 1.4 20 2.0 20 2.0 20 3.0 20 4.4 20 4.4 20 6.6 20 6.6 20 9.4 20 9.4 25 Volt 25 0.5 25 0.5 25 0.6 25 0.8 25 1.2 25 1.2 25 2.5 25 2.5 25 3.8 25 5.5 25 5.5 25 8.3 25 11.8 35 Volt 35 0.5 35 0.5 35 0.5 35 0.5 35 0.5 35 0.8 35 0.8 35 1.2 35 1.6 35 1.6 35 2.4 35 3.5 35 5.3 35 7.7 35 11.6 DF @ 120Hz (%) ESR @ 100kHz (Ω) *1 ΔC/C (%) MSL 6 6 10 6 15 8 6 8 6 16 8 6 10 6 15 10 15 25 3.0 2.0 3.0 2.0 3.0 1.9 1.1 1.9 1.1 2.0 0.9 0.7 0.8 0.6 0.7 0.6 0.6 0.7 * * * * ±15 * * * * ±15 * * ±10 * ±10 * * ±10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 3 4 4 6 6 6 6 8 6 6 8 8 8 6 10 8 5.0 4.5 3.0 2.8 3.5 2.5 3.5 2.1 1.2 1.9 1.1 1.1 0.7 1.1 0.7 * * * * * * * * * * * * * * * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 6 6 8 6 12 6 8 8 6 8 8 7.5 6.7 6.3 6.0 4.0 2.8 1.9 1.5 1.2 1.1 0.7 0.7 0.7 * * * * * * * * * * * * * 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 4 4 6 6 4 4 8 6 6 6 6 8 8 12.0 10.0 7.6 7.5 7.5 7.0 3.8 3.5 3.1 1.8 1.8 1.6 0.7 0.7 0.7 * * * * * * * * * * * * * * * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 #: "M" for ±20% tolerance, "K" for ± 10% tolerance. Moisture Sensitivity Level (MSL) is defined according to J-STD-020. 062718 F93 Series Resin-Molded Chip, Standard Tantalum J-Lead QUALIFICATION TABLE TEST Damp Heat (Steady State) Temperature Cycles Resistance to Soldering Heat Surge Endurance Shear Test Terminal Strength Failure Rate F93 series (Temperature range -55ºC to +125ºC) Condition At 40°C, 90 to 95% R.H., 500 hours (No voltage applied) Capacitance Change ........... Refer to page 32 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less -55°C / +125°C, 30 minutes each, 5 cycles Capacitance Change ........... Refer to page 32 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less 10 seconds reflow at 260°C, 5 seconds immersion at 260°C. Capacitance Change ........... Refer to page 32 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 32 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After 2000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C, or derated voltage in series with a 3Ω resistor at 125°C, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 32 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level. We can supply the type of compliance to AEC-Q200. Please contact to your local AVX sales office when these series are being designed in your application. 062718 33 F93 Series Resin-Molded Chip, Standard Tantalum J-Lead AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONVENTIONAL SMD MnO2 34 062718