F970J225MAA

F97 Series – Enhanced Reliability Professional &  Automotive Grafe - J-Lead F97 Series Resin-Molded Chip, Improved Reliability J-Lead FEATURES • • • • • Compliant to the RoHS3 directive 2015/863/EU Compliant to AEC-Q200 Improved Reliability - FR=0.5%/1000hrs 100% Surge Current Tested SMD J-lead LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Automotive Electronics(Engine ECU) • Industrial Equipment CASE DIMENSIONS: millimeters (inches) Code EIA Code EIA Metric L ± 0.20 (0.008) W ± 0.20 (0.008) -0.10 (0.004) H ± 0.20 (0.008) -0.10 (0.004) W1 ± 0.20 (0.008) A ± 0.30 (0.012) -0.20 (0.008) S Min. A 1206 1210 2312 2917 3216-18 3528-21 6032-28 7343-31 3.20 (0.126) 3.50 (0.138) 6.00 (0.236) 7.30 (0.287) 1.60 (0.063) 2.80 (0.110) 3.20 (0.126) 4.30 (0.169) 1.60 (0.063) 1.90 (0.075) 2.60 (0.102) 2.90 (0.114) 1.20 (0.047) 2.20 (0.087) 2.20 (0.087) 2.40 (0.094) 0.80 (0.031) 0.80 (0.031) 1.30 (0.051) 1.30 (0.051) 1.10 (0.043) 1.40 (0.055) 2.90 (0.114) 4.40 (0.173) B C N W1 dimension applies to the termination width for a dimensional area only A, B, C, N CASE Capacitance Value in pF 476 = 47μF LOGO 4V 6.3V 10V Rated Voltage Code A = 10V ID Code 476 A xxxxx Polarity Band (Anode+) G J A 16V 20V 25V C D E 35V V *Capacitance code of “P” case products are as shown below. HOW TO ORDER F97 1C 335 M A  Type Rated Voltage Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance K = ±10% M = ±20% Case Size See table above Packaging See Tape & Reel Packaging Section TECHNICAL SPECIFICATIONS Category Temperature Range: Rated Temperature: Capacitance Tolerance: Dissipation Factor: ESR 100kHz: Leakage Current: Capacitance Change By Temperature -55 to +125°C +85°C ±20%, ±10% at 120Hz Refer to next page Refer to next page After 1 minute’s application of rated voltage, leakage current at 20°C is not more than 0.01CV or 0.5μA, whichever is greater. After 1 minute’s application of rated voltage, leakage current at 85°C is not more than 0.1CV or 5μA, whichever is greater. After 1 minute’s application of derated voltage, leakage current at 125°C is not more than 0.125CV or 6.3μA, whichever is greater. +15% Max. at +125°C +10% Max. at +85°C -10% Max. at -55°C The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090121 – polymer, tantalum and niobium oxide capacitors – 105 F97 Series Resin-Molded Chip, Improved Reliability J-Lead CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 0.33 334 0.47 474 0.68 684 1.0 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 6.3V (0J) 10V (1A) Rated Voltage 16V (1C) 20V (1D) A A A A/B B A/B B A/B B/C/N B/C/N N C A B A/B A/C B/C C 25V (1E) A A A B A/B C C N C/N A A A/B B A/B/C B/C/N B/C/N C/N 35V (1V) A A A B(M) B B C C N N A A B B C C/N N N Released ratings (M tolerance only) Please contact to your local KYOCERA AVX sales office when these series are being designed in your application. Voltage vs Temperature Rating 100% 100% 100% 67% 67% 50% 50% 90% 80% 70% 60% 50% 40% 30% 63% 42% 32% 20% 10% 0% -55ºC 85ºC 125ºC Rated Voltage Recommended Applications Voltage in General Circuit Recommended Applications Voltage in Low Impedance Circuit 106 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 022422 – polymer, tantalum and niobium oxide capacitors – F97 Series Resin-Molded Chip, Improved Reliability J-Lead RATINGS & PART NUMBER REFERENCE Capacitance Rated (μF) Voltage (V) DCL (μA) DF @ ESR @ 120Hz (%) 100kHz (Ω) Part Number Case Size F970J335#AA F970J156#BA F970J226#AA F970J226#BA F970J336#AA F970J336#CC F970J476#BA F970J476#CC F970J157#CC A B A B A C B C C 3.3 15 22 22 33 33 47 47 150 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 0.5 0.9 1.4 1.4 2.1 2.1 3.0 3.0 9.5 4 6 12 8 12 6 8 6 12 F971A225#AA F971A335#AA F971A475#AA F971A475#BA F971A685#BA F971A106#AA F971A106#BA F971A156#BA F971A226#AA F971A226#BA F971A336#BA F971A336#CC F971A336#NC F971A476#BA F971A476#CC F971A476#NC F971A686#NC F971A107#CC A A A B B A B B A B B C N B C N N C 2.2 3.3 4.7 4.7 6.8 10 10 15 22 22 33 33 33 47 47 47 68 100 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.5 0.5 0.5 0.5 0.7 1.0 1.0 1.5 2.2 2.2 3.3 3.3 3.3 4.7 4.7 4.7 6.8 10.0 4 4 6 6 6 6 6 6 15 8 8 6 6 10 8 6 6 10 F971C105#AA F971C225#AA F971C335#AA F971C475#AA F971C475#BA F971C685#BA F971C106#AA F971C106#BA F971C106#CC F971C226#BA F971C226#CC F971C226#NC F971C336#BA F971C336#CC F971C336#NC F971C476#CC F971C476#NC A A A A B B A B C B C N B C N C N 1 2.2 3.3 4.7 4.7 6.8 10 10 10 22 22 22 33 33 33 47 47 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 0.5 0.5 0.5 0.8 0.8 1.1 1.6 1.6 1.6 3.5 3.5 3.5 5.3 5.3 5.3 7.5 7.5 4 4 4 8 6 6 8 6 6 8 8 6 10 8 6 10 8 F971D105#AA F971D155#AA F971D225#AA F971D335#BA F971D475#AA F971D475#BA F971D685#CC F971D106#CC F971D156#NC F971D226#CC F971D226#NC A A A B A B C C N C N 1 1.5 2.2 3.3 4.7 4.7 6.8 10 15 22 22 20 20 20 20 20 20 20 20 20 20 20 0.5 0.5 0.5 0.7 0.9 0.9 1.4 2.0 3.0 4.4 4.4 4 4 6 4 8 6 6 6 6 8 6 F971E684#AA F971E105#AA F971E225#BA F971E335#BA F971E685#CC F971E106#NC F971E156#NC F971E226#NC A A B B C N N N 0.68 1 2.2 3.3 6.8 10 15 22 25 25 25 25 25 25 25 25 0.5 0.5 0.6 0.8 1.7 2.5 3.8 5.5 4 4 4 4 6 6 6 6 25ºC 100kHz RMS Current (mA) 85ºC 125ºC *1 ΔC/C (%) MSL 6.3 Volt 4.5 2.0 2.5 1.9 2.5 1.1 1.0 0.9 0.7 129 206 173 212 173 316 292 350 396 116 186 156 190 156 285 262 315 357 52 82 69 85 69 126 117 140 159 * * * * * * * * * 3 3 3 3 3 3 3 3 3 5.0 4.5 4.0 2.8 2.5 3.0 2.0 2.0 3.0 1.9 1.9 1.1 0.7 1.0 0.9 0.7 0.6 0.7 122 129 137 174 184 158 206 206 158 212 212 316 463 292 350 463 500 396 110 116 123 157 166 142 186 186 142 190 190 285 417 262 315 417 450 357 49 52 55 70 74 63 82 82 63 85 85 126 185 117 140 185 200 159 * * * * * * * * * * * * * * * * * * 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7.5 5.0 4.5 4.0 2.8 2.5 3.5 2.1 1.5 1.9 1.1 0.7 2.1 1.1 0.7 1.1 0.7 100 122 129 137 174 184 146 201 271 212 316 463 201 316 463 316 463 90 110 116 123 157 166 132 181 244 190 285 417 181 285 417 285 417 40 49 52 55 70 74 59 80 108 85 126 185 80 126 185 126 185 * * * * * * * * * * * * * * * * * 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 7.5 6.7 6.3 3.1 4.0 2.8 1.8 1.5 0.7 1.1 0.7 100 106 109 166 137 174 247 271 463 316 463 90 95 98 146 123 157 222 244 417 285 417 40 42 44 66 55 70 99 108 185 126 185 * * * * * * * * * * * 3 3 3 3 3 3 3 3 3 3 3 7.6 7.5 3.8 3.5 1.8 1.0 0.7 0.7 99 100 150 156 247 387 463 463 89 90 135 140 222 349 417 417 40 40 60 62 99 155 185 185 * * * * * * * * 3 3 3 3 3 3 3 3 10 Volt 16 Volt 20 Volt 25 Volt The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 030321 – polymer, tantalum and niobium oxide capacitors – 107 F97 Series Resin-Molded Chip, Improved Reliability J-Lead RATINGS & PART NUMBER REFERENCE Part Number Case Size F971V334#AA F971V474#AA F971V684#AA F971V105MBA F971V155#BA F971V225#BA F971V335#CC F971V475#CC F971V685#NC F971V106#NC A A A B B B C C N N Capacitance Rated (μF) Voltage (V) DCL (μA) DF @ ESR @ 120Hz (%) 100kHz (Ω) 25ºC 100kHz RMS Current (mA) 85ºC 125ºC *1 ΔC/C (%) MSL * * * * * * * * * * 3 3 3 3 3 3 3 3 3 3 35 Volt 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 35 35 35 35 35 35 35 35 35 35 0.5 0.5 0.5 0.5 0.5 0.8 1.2 1.6 2.4 3.5 4 4 4 4 4 4 4 6 6 6 12.0 10.0 7.6 4.0 4.0 3.8 2.0 1.8 1.0 1.0 79 87 99 146 146 150 235 247 387 387 71 78 89 131 131 135 211 222 349 349 32 35 40 58 58 60 94 99 155 155 *1: ΔC/C Marked “*” #: "M" for ±20% tolerance, "K" for ± 10% tolerance. Moisture Sensitivity Level (MSL) is defined according to J-STD-020. Item All Case (%) Damp Heat ±10 Temperature cycles ±5 Resistance soldering heat ±5 Surge ±5 Endurance ±10 Load Humidity ±10 QUALIFICATION TABLE TEST Damp Heat (Steady State) F97 series (Temperature range -55ºC to +125ºC) Condition At 85°C, 85% R.H., 1000 hours (No voltage applied) Capacitance Change ................... Refer to the table above (*1) Dissipation Factor ........................ Initial specified value or less Leakage Current ........................... 125% or less than the initial specified value Load Humidity After 1000 hour’s application of rated voltage in series with a 33Ω resistor at 85°C, 85% R.H., capacitors meet the characteristics requirements table below. Capacitance Change ................... Refer to the table above (*1) Dissipation Factor ........................ 120% or less than the initial specified value Leakage Current ........................... 200% of less than the initial specified value Temperature Cycles At -55°C / +125°C, 30 minutes each, 1000 cycles Capacitance Change ................... Refer to the table above (*1) Dissipation Factor ........................ Initial specified value or less Leakage Current ........................... Initial specified value or less Resistance to Soldering Heat 10 seconds reflow at 260°C, 5 seconds immersion at 260°C. Capacitance Change ................... Refer to the table above (*1) Dissipation Factor ........................ Initial specified value or less Leakage Current ........................... Initial specified value or less Solderability After immersing capacitors completely into a solder pot at 245ºC for 2 to 3 seconds, more than 3/4 of their electrode area shall remain covered with new solder. Surge After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ..................Refer to the table above (*1) Dissipation Factor ......................Initial specified value or less Leakage Current .........................Initial specified value or less Endurance After 2000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C, or derated voltage in series with a 3Ω resistor at 125°C, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ................... Refer to the table above (*1) Dissipation Factor ....................... Initial specified value or less Leakage Current .......................... Initial specified value or less Shear Test After applying the pressure load of 17.7N for 60 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode Terminal Strength Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of the substrate so that substrate may bend by1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. Failure Rate 0.5% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level. 108 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 022422 – polymer, tantalum and niobium oxide capacitors – F97 Series Resin-Molded Chip, Improved Reliability J-Lead SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP : CONVENTIONAL SMD MnO2 TMJ High Rel. & Special High Temp THH ultra low DCL THJ 200°C THJ F97-HT3 175°C auto 135°C auto TRM TRJ Industrial & Automotive 230°C COTS+ Hermetic professional multianode professional TAJ F91-AJ6 auto TPS auto *T/*U F93-AJ6 auto *T/*U TPS F97 professional auto F98-AJ6 auto TPM multianode Standard TAJ Standard Low Profile High CV TAJ TLN undertab F91 TAC Low Profile microchip TLJ microchip TPC microchip F93 Low ESR F98-AS1 TLC undertab, fused F92 F98 undertab The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 030321 – polymer, tantalum and niobium oxide capacitors – 109