F980J476MSA

F98 Series Resin-Molded Chip, High CV Undertab FEATURES • Compliant to the RoHS2 directive 2011/65/EU • SMD face down design • Small and low profile LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • • • • Smartphone Mobile phone Wireless module Hearing aid CASE DIMENSIONS: millimeters (inches) Code EIA Code EIA Metric L W1 H S1 S2 ) 0.65±0.10 (0.026±0.004) 0.80±0.10*3 (0.031±0.004) 0.50±0.10 (0.020±0.004) 0.60±0.10 (0.024±0.004) M 0603 1608-09 S 0805 2012-09 2.00 -0.10 (0.079 +0.008 -0.004 ) 1.25 -0.10 (0.049 +0.008 -0.004 ) 0.90±0.10 (0.035±0.004) 0.80±0.10 (0.031±0.004) 0.50±0.10 (0.020±0.004) 1.00±0.10 (0.039±0.004) U 0402 1106-06 1.10±0.05 (0.043±0.002) 0.60±0.05 (0.024±0.002) 0.35±0.05 (0.014±0.002) 0.55±0.05 (0.022±0.002) 0.30±0.05 (0.012±0.002) 0.50±0.05 (0.020±0.002) ) +0.20 +0.20 0.85 -0.10 (0.033 +0.008 -0.004 W2 +0.20 1.60 -0.10 (0.063 +0.008 -0.004 +0.20 *3 F980J107MMAAXE: 1.0mm Max. L MARKING W1 U CASE H M CASE S CASE *Capacitance Code J W2 S1 S2 S1 Js Rated Voltage Code Rated Voltage Code HOW TO ORDER F98 0J 106 M M   Type Rated Voltage Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = ±20% Case Size See table above Packaging See Tape & Reel Packaging Section Specification Suffix LZT = Rated temperature 60ºC AXE = Rated temperature 60ºC and H dimension 1.0mm Max TECHNICAL SPECIFICATIONS Category Temperature Range: Rated Temperature: Capacitance Tolerance: Dissipation Factor: ESR 100kHz: Leakage Current: Termination Finish: 58 -55 to +125°C +85°C or +60°C ±20% at 120Hz Refer to next page Refer to next page Refer to next page Provided that: After 5 minute’s application of rated voltage, leakage current at 85°C or +60°C 10 times or less than 20ºC specified value. After 5 minute’s application of rated voltage, leakage current at 125°C 12.5 times or less than 20ºC specified value. M, S case: Gold Plating (standard), U case: Sn-3.5Ag Plating (standard) The Important Information/Disclaimer is incorporated in these specifications by reference and should be reviewed in full before placing any order. 033020 F98 Series Resin-Molded Chip, High CV Undertab CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF 0.47 1.0 2.2 4.7 10 15 22 33 47 68 100 220 Rated Voltage Code 474 105 225 475 106 156 226 336 476 686 107 227 2.5 (0e) 4V (0G) 6.3V (0J) U U U M/U** M M M/S M/S S M 10V (1A) M/U M/U** M/U M/U** M M M M/S M**/S M**/S S 16V (1C) U M M M S 20V (1D) 25V (1E) 35V (1V) M M S *Cap Code N A J S a e J n s w A J M*4/S Released ratings *4 (AXE) Rated temperature 60ºC and H dimension 1.0mm Max. Please contact AVX when you need detail spec. ** (LZT) Rated temperature 60ºC. Please contact AVX when you need detail spec. Please contact to your local AVX sales office when these series are being designed in your application. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Size Capacitance (μF) Rated Voltage (V) DCL (μA) DF @ 120Hz (%) F980E476MMA M 47 2.5 1.2 30 F980G475MUA F980G106MUA F980G156MUA F980G226MMA F980G226MUALZT F980G336MMA F980G476MMA F980G686MMA F980G686MSA F980G107MMA F980G107MSA F980G227MSA U U U M U M M M S M S S 4.7 10 15 22 22 33 47 68 68 100 100 220 4 4 4 4 4 4 4 4 4 4 4 4 0.5 0.8 9.0 0.9 25.0 1.3 1.9 27.2 2.7 80.0 4.0 132 20 25 40 15 40 30 40 50 30 60 35 80 F980J475MMA F980J475MUA F980J106MMA F980J106MUALZT F980J226MMA F980J336MMA F980J476MMA F980J476MSA F980J107MMAAXE F980J107MSA M U M U M M M S M S 4.7 4.7 10 10 22 33 47 47 100 100 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 0.5 0.6 0.6 6.3 1.4 4.2 29.6 3.0 126 63.0 20 20 8 30 20 35 45 25 80 50 F981A225MMA F981A225MUA F981A475MMA F981A475MUALZT F981A106MMA F981A226MMALZT F981A226MSA F981A336MMALZT F981A336MSA F981A476MSA M U M U M M S M S S 2.2 2.2 4.7 4.7 10 22 22 33 33 47 10 10 10 10 10 10 10 10 10 10 0.5 0.5 0.5 4.7 1.0 11.0 2.2 33.0 3.3 9.4 6 15 6 25 20 30 20 45 30 35 F981C474MUA F981C105MMA F981C225MMA F981C475MMA F981C106MSA U M M M S 0.47 1 2.2 4.7 10 16 16 16 16 16 0.5 0.5 0.5 0.8 1.6 6 6 6 12 18 F981D105MMA M 1 20 0.5 6 F981E105MMA M 1 25 0.5 8 F981V105MSA S 1 35 0.7 20 ESR @ 100kHz (Ω) 2.5 Volt 4 Volt 6.3 Volt 10 Volt 16 Volt 20 Volt 25 Volt 35 Volt *2: Leakage Current After 5 minute’s application of rated voltage, leakage current at 20ºC. 100kHz RMS Current (mA) 25ºC 60ºC 85ºC 125ºC *1 ΔC/C (%) 4 79 – 71 32 ±30 3 20 20 25 7.5 20 4 8 10 4 10 4 5 27 27 24 58 27 79 56 50 106 50 106 95 – – – – 25 – – – – – – – 25 25 22 52 – 71 50 45 95 45 95 85 11 11 10 23 11 32 22 20 42 20 42 38 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 3 3 3 3 3 3 3 3 3 3 3 3 7.5 20 6 30 6 8 10 6 10 8 58 27 65 22 65 56 50 87 50 75 – – – 20 – – – – 45 – 52 25 58 – 58 50 45 78 – 68 23 11 26 9 26 22 20 35 20 30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 3 3 3 3 3 3 3 3 3 3 7.5 15 6 25 7.5 8 4 8 6 5 58 32 65 24 58 56 106 56 87 95 – – – 22 – 50 – 50 – – 52 28 58 – 52 – 95 – 78 85 23 13 26 10 23 22 42 22 35 38 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 3 3 3 3 3 3 3 3 3 3 25 10 10 12 4 24 50 50 46 106 – – – – – 22 45 45 41 95 10 20 20 18 42 ±20 ±30 ±30 ±30 ±30 3 3 3 3 3 10 50 – 45 20 ±30 3 10 50 – 45 20 ±30 3 8 75 – 68 30 ±30 3 MSL Moisture Sensitivity Level (MSL) is defined according to J-STD-020. The Important Information/Disclaimer is incorporated in these specifications by reference and should be reviewed in full before placing any order. 033020 59 F98 Series Resin-Molded Chip, High CV Undertab QUALIFICATION TABLE TEST Condition Damp Heat (Steady State) At 40°C, 90 to 95% R.H., 500 hours (No voltage applied) Capacitance Change ........... Refer to page 60 (*1) Dissipation Factor ................ 150% or less of initial specified value Leakage Current ................... 200% or less of initial specified value Temperature Cycles -55°C / +125°C, 30 minutes each, 5 cycles Capacitance Change ........... Refer to page 60 (*1) Dissipation Factor ................ 150% or less of initial specified value Leakage Current ................... 200% or less of initial specified value Resistance to Soldering Heat Surge 10 seconds reflow at 260°C, 5 seconds immersion at 260°C. Capacitance Change ........... Refer to page 60 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current ................... Initial specified value or less After application of surge in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above. (Not applied to LZT and AXE.) Capacitance Change ........... Refer to page 60 (*1) Dissipation Factor ................ 150% or less of initial specified value Leakage Current ................... 200% or less of initial specified value Endurance After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C or +60°C, capacitors shall meet the characteristic requirements in the table above. Capacitance Change .............Refer to page 60 (*1) Dissipation Factor .................150% or less of initial specified value Leakage Current .....................200% or less of initial specified value Shear Test After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Terminal Strength 60 F98 series (Temperature range -55ºC to +125ºC) Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. The Important Information/Disclaimer is incorporated in these specifications by reference and should be reviewed in full before placing any order. 033020 F98 Series Resin-Molded Chip, High CV Undertab AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP CONDUCTIVE POLYMER CONVENTIONAL TANTALUM NIOBIUM OXIDE TC Series T Cx T Series T xx N Series N xx F Series F38 F Series F xx CATHODE – DIELECTRIC ANODE – conductive polymer Ta2O5 + – MnO2 Ta2O5 + Tantalum MnO2 Nb2O5 + Tantalum Niobium Oxide FIVE CAPACITOR CONSTRUCTION STYLES J-lead Undertab TACmicrochip® Conformal Hermetic SERIES LINE UP : CONVENTIONAL SMD MnO 2 THJ 200°C Industrial & Automotive THJ 175°C auto TMJ professional low DCL F97-HT3 THH 230°C Hermetic TRM TRJ low DCL multianode professional TAJ F91-AJ6 auto TPS auto *T/*U F9H 135°C auto F97 professional F98-AJ6 auto F93-AJ6 auto *T / *U TPS 150°C auto auto TPM multianode F93-BE low DCL Standard TAJ Standard Low Profile High CV TAJ TLN undertab F91 TAC Low Profile microchip TLJ microchip F93 TPC microchip TLC Low ESR F98-AS1 undertab, fused F92 F98 undertab The Important Information/Disclaimer is incorporated in these specifications by reference and should be reviewed in full before placing any order. 033020 61