F981E105MMA

F98 Series – Undertab F98 Series Resin-Molded Chip, High CV Undertab FEATURES • • • • Compliant to the RoHS3 directive 2015/863/EU SMD Face Down Design Small and Low Profile 100% Surge Current Tested LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • • • • Smartphone Mobile Phone Wireless Module Hearing Aid CASE DIMENSIONS: Code EIA Code millimeters (inches) EIA Metric L W1 H S1 S2 ) 0.65±0.10 (0.026±0.004) 0.80±0.10*3 (0.031±0.004) 0.50±0.10 (0.020±0.004) 0.60±0.10 (0.024±0.004) M 0603 1608-09 S 0805 2012-09 2.00 -0.10 (0.079 +0.008 -0.004 ) 1.25 -0.10 (0.049 +0.008 -0.004 ) 0.90±0.10 (0.035±0.004) 0.80±0.10 (0.031±0.004) 0.50±0.10 (0.020±0.004) 1.00±0.10 (0.039±0.004) U 0402 1106-06 1.10±0.05 (0.043±0.002) 0.60±0.05 (0.024±0.002) 0.35±0.05 (0.014±0.002) 0.55±0.05 (0.022±0.002) 0.30±0.05 (0.012±0.002) 0.50±0.05 (0.020±0.002) ) +0.20 +0.20 0.85 -0.10 (0.033 +0.008 -0.004 W2 +0.20 1.60 -0.10 (0.063 +0.008 -0.004 +0.20 *3 F980J107MMAAXE: 1.0mm Max. L MARKING W1 U CASE H M CASE S CASE *Capacitance Code J W2 S1 S2 S1 Js Rated Voltage Code Rated Voltage Code HOW TO ORDER F98 0J 106 M M   Type Rated Voltage Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = ±20% Case Size See table above Packaging See Tape & Reel Packaging Section Specification Suffix LZT = Rated temperature 60ºC AXE = Rated temperature 60ºC and H dimension 1.0mm Max AH1 = Low ESR TECHNICAL SPECIFICATIONS Category Temperature Range: Rated Temperature: Capacitance Tolerance: Dissipation Factor: ESR 100kHz: Leakage Current: Termination Finish: 54 -55 to +125°C +85°C or +60°C ±20% at 120Hz Refer to next page Refer to next page Refer to next page Provided that: After 5 minute’s application of rated voltage, leakage current at 85°C or +60°C 10 times or less than 20ºC specified value. After 5 minute’s application of rated voltage, leakage current at 125°C 12.5 times or less than 20ºC specified value. M, S case: Gold Plating (standard), U case: Sn Plating (standard) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 011822 – polymer, tantalum and niobium oxide capacitors – F98 Series Resin-Molded Chip, High CV Undertab CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance Rated Voltage μF Code 2.5 (0e) 4V (0G) 6.3V (0J) 10V (1A) 16V (1C) 20V (1D) 25V (1E) 0.47 474 U 1.0 105 M M M 2.2 225 M/U M 4.7 475 U M/U M/U** M 10 106 U M/U** M S 15 156 U 22 226 M/U** M M**/S 33 336 M M M**/S 47 476 M M M/S/S(AH1) S 68 686 M/S 100 107 M/M(AH1)/S M*4/S 150 157 M* 220 227 S* S Released ratings *4 (AXE) Rated temperature 60ºC and H dimension 1.0mm Max. Please contact KYOCERA AVX when you need detail spec. ** (LZT) Rated temperature 60ºC. Please contact KYOCERA AVX when you need detail spec. *Codes under development - subject to change. Please contact to your local KYOCERA AVX sales office when these series are being designed in your application. 35V (1V) *Cap Code N A J S a e j n s w A S J RATINGS & PART NUMBER REFERENCE Part Number Case Size Capacitance (μF) Rated Voltage (V) DCL (μA) F980E476MMA M 47 2.5 1.2 F980G475MUA F980G106MUA F980G156MUA F980G226MMA F980G226MUALZT F980G336MMA F980G476MMA F980G686MMA F980G686MSA F980G107MMA F980G107MMAAH1 F980G107MSA F980G227MSA U U U M U M M M S M M S S 4.7 10 15 22 22 33 47 68 68 100 100 100 220 4 4 4 4 4 4 4 4 4 4 4 4 4 0.5 0.8 9.0 0.9 25.0 1.3 1.9 27.2 2.7 80.0 80.0 4.0 132 F980J475MMA F980J475MUA F980J106MMA F980J106MUALZT F980J226MMA F980J336MMA F980J476MMA F980J476MSA F980J476MSAAH1 F980J107MMAAXE F980J107MSA M U M U M M M S S M S 4.7 4.7 10 10 22 33 47 47 47 100 100 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 0.5 0.6 0.6 6.3 1.4 4.2 29.6 3.0 3.0 126 63.0 F981A225MMA F981A225MUA F981A475MMA F981A475MUALZT F981A106MMA F981A226MMALZT F981A226MSA F981A336MMALZT F981A336MSA F981A476MSA M U M U M M S M S S 2.2 2.2 4.7 4.7 10 22 22 33 33 47 10 10 10 10 10 10 10 10 10 10 0.5 0.5 0.5 4.7 1.0 11.0 2.2 33.0 3.3 9.4 F981C474MUA F981C105MMA F981C225MMA F981C475MMA F981C106MSA U M M M S 0.47 1 2.2 4.7 10 16 16 16 16 16 0.5 0.5 0.5 0.8 1.6 F981D105MMA M 1 20 0.5 F981E105MMA M 1 25 0.5 F981V105MSA S 1 35 0.7 *2: Leakage Current After 5 minute’s application of rated voltage, leakage current at 20ºC. DF@ ESR@ 120Hz 100kHz (%) (Ω) 2.5 Volt 30 4 4 Volt 20 20 25 20 40 25 15 7.5 40 20 30 4 40 8 50 10 30 4 60 10 60 2 35 4 80 5 6.3 Volt 20 7.5 20 20 8 6 30 30 20 6 35 8 45 10 25 6 25 1 80 10 50 8 10 Volt 6 7.5 15 15 6 6 25 25 20 7.5 30 8 20 4 45 8 30 6 35 5 16 Volt 6 25 6 10 6 10 12 12 18 4 20 Volt 6 10 25 Volt 8 10 35 Volt 20 8 25ºC 60ºC 85ºC 125ºC *1 ΔC/C (%) MSL 79 – 71 32 ±30 3 27 27 24 58 27 79 56 50 106 50 112 106 95 – – – – 25 – – – – – – – – 25 25 22 52 – 71 50 45 95 45 101 95 85 11 11 10 23 11 32 22 20 42 20 45 42 38 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 3 3 3 3 3 3 3 3 3 3 3 3 3 58 27 65 22 65 56 50 87 212 50 75 – – – 20 – – – – – 45 – 52 25 58 – 58 50 45 78 191 – 68 23 11 26 9 26 22 20 35 85 20 30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 3 3 3 3 3 3 3 3 3 3 3 58 32 65 24 58 56 106 56 87 95 – – – 22 – 50 – 50 – – 52 28 58 – 52 – 95 – 78 85 23 13 26 10 23 22 42 22 35 38 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 3 3 3 3 3 3 3 3 3 3 24 50 50 46 106 – – – – – 22 45 45 41 95 10 20 20 18 42 ±20 ±30 ±30 ±30 ±30 3 3 3 3 3 50 – 45 20 ±30 3 50 – 45 20 ±30 3 – 68 30 ±30 3 100kHz RMS Current (mA) 75 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 041122 – polymer, tantalum and niobium oxide capacitors – 55 F98 Series Resin-Molded Chip, High CV Undertab QUALIFICATION TABLE TEST Damp Heat (Steady State) Temperature Cycles Resistance to Soldering Heat Surge Endurance Shear Test Terminal Strength 56 F98 series (Temperature range -55ºC to +125ºC) Condition At 40°C, 90 to 95% R.H., 500 hours (No voltage applied) Capacitance Change ............ Refer to the table above (*1) Dissipation Factor ................. 150% or less of initial specified value Leakage Current .................... 200% or less of initial specified value -55°C / +125°C, 30 minutes each, 5 cycles Capacitance Change ............ Refer to the table above (*1) Dissipation Factor ................. 150% or less of initial specified value Leakage Current .................... 200% or less of initial specified value 10 seconds reflow at 260°C, 5 seconds immersion at 260°C. Capacitance Change ............ Refer to the table above (*1) Dissipation Factor ................. Initial specified value or less Leakage Current .................... Initial specified value or less After application of surge in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above. (Not applied to LZT and AXE.) Capacitance Change ............ Refer to the table above (*1) Dissipation Factor ................. 150% or less of initial specified value Leakage Current .................... 200% or less of initial specified value After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C or +60°C, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ..............Refer to the table above (*1) Dissipation Factor .. .................150% or less of initial specified value Leakage Current .....................200% or less of initial specified value After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 081921 – polymer, tantalum and niobium oxide capacitors – F98 Series Resin-Molded Chip, High CV Undertab SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP : CONVENTIONAL SMD MnO2 TMJ High Rel. & Special High Temp THH ultra low DCL THJ 200°C THJ F97-HT3 175°C auto 135°C auto TRM TRJ Industrial & Automotive 230°C COTS+ Hermetic professional multianode professional TAJ F91-AJ6 auto TPS auto *T/*U F93-AJ6 auto *T/*U TPS F97 professional auto F98-AJ6 auto TPM multianode Standard TAJ Standard Low Profile High CV TAJ TLN undertab F91 TAC Low Profile microchip TLJ microchip TPC microchip F93 Low ESR F98-AS1 TLC undertab, fused F92 F98 undertab The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 030321 – polymer, tantalum and niobium oxide capacitors – 57