GL6R0KA7B

GL Series Ultra Broad Band Inductor ADVANTAGES • Ultra Broad Band Performance • Ultra-Low Insertion Loss • Excellent Return Loss Through 40 GHz • Flat Frequency Response • Part to Part Performance Repeatability • Rugged Powdered Iron Core APPLICATIONS • Communication Customers • Receiver Optical Sub-Assemblies • Transimpedance Amplifier Customers • Test Equipment Manufacturers The GL Series was developed specifically to deliver repeatable and reliable Ultra Broad Band performance up through 40 + GHz. The GL Series of inductors provide Ultra-Low Insertion loss, excellent return loss and extreme part to part performance repeatability. The pyramid shape of the GL Series provides for maximum inductance in the space available. The GL Series was developed using a powdered iron core and gold plated terminations that allow for easy use in hand solder applications. The combination of Flat Frequency Response with the Ultra-Low Insertion loss makes this an ideal component for optical data systems, transimpedance amplifers and test equipment. MECHANICAL SPECIFICATIONS Insulated .001 (.025) Max. .011 (.280) Max. H Uninsulated 0.20 +0.10 -.05 (5.08 + 2.54 -1.27) Insulated .030 ± .020 (.762 ± .508) Uninsulated .40 +.150 -.05 (10.16 +3.81 -1.27) L inches (mm) Inductance (μH) 2 6 11 L 0.102 ± 0.002 (2.59 ± 0.051) 0.182 ± 0.003 (4.62 ± 0.076) 0.182 ± 0.003 (4.62 ± 0.076) H 0.065 ± 0.002 (1.65 ± 0.051) 0.073 ± 0.002 (1.85 ± 0.051) 0.072 ± 0.002 (1.83 ± 0.051) # of Turns 46 Turns #44 AWG Cu 80 Turns #44 AWG Cu 110 Turns #47 AWG Cu ELECTRICAL SPECIFICATIONS Operating Temperature: -55ºC to + 125ºC Operating Frequency Range 2.3 MHz to 40 GHz 880 KHz to 40 GHz 500 KHz to 40 GHz Insertion Loss 0.5 dB typ. 0.6 dB typ. 0.4 dB typ. Return Loss -17 dB typ. -18 dB typ. -18 dB typ. Rdc (Ω) @ 20ºC, 10 mA current 1.45 2.90 7.00 IDC (mA), dc max. 250 200 115 Number of Turns 46 80 110 Cu Wire Size (AWG) 44 44 47 Inductance (μH) 2 6 11 GL Series Ultra Broad Band Inductor HOW TO ORDER GL 6R0 K A 7 B AVAILABLE PART NUMBERS GL2R0KA7B250 GL6R0KA7B200 GL110KA7B115 Style Inductance First 2 significant digits for inductance Tolerance K = ± 10% Failure Rate Termination 7 = 15-25µ in., Gold Plate Packaging B = 1 piece in plastic box GL2R0KA7B250 S21 2.50 2.05 50.00 40.00 1.50 1.00 0.50 0.00 -0.50 -1.00 -1.50 -2.00 -2.50 0 8 16 24 32 40 30.00 20.00 10.00 0.00 -10.00 -20.00 -30.00 S11 Magnitude dB (Typical) Magnitude dB -40.00 -50.00 0.4 8 16 24 32 (Typical) 40 Frequency (GHz) Frequency (GHz) GL6R0KA7B200 2.50 2.05 1.50 1.00 0.50 0.00 -0.50 -1.00 -1.50 -2.00 -2.50 Cht: Start 400.00 MHz Stop 40.0000 GHz (1) B21 / M dB LogMag C 2-Port 50.00 40.00 30.00 20.00 10.00 0.00 -10.00 -20.00 -30.00 -40.00 -50.00 (1) B21 / M dB LogMag C 2-Port Cht: Start 400.00 MHz Stop 40.0000 GHz GL110KA7B115 (1) B21 / M dB LogMag C 2-Port 2.50 2.05 1.50 1.00 0.50 0.00 -0.50 -1.00 -1.50 -2.00 -2.50 Cht: Start 400.00 MHz Stop 40.0000 GHz (1) B21 / M dB LogMag C 2-Port 50.00 40.00 30.00 20.00 10.00 0.00 -10.00 -20.00 -30.00 -40.00 -50.00 Cht: Start 400.00 MHz Stop 40.0000 GHz TEST PARAMETERS: All testing performed on 10 mil thick Rogers RO4350 microstrip board, with the GL Leads connected between the microstrip trace and the underside ground plane (nominal 50 ohm characteristic impedance)