X5R Dielectric
General Specifications
GENERAL DESCRIPTION
• General Purpose Dielectric for Ceramic Capacitors
• EIA Class II Dielectric
• Temperature variation of capacitance is within ±15%
from -55°C to +85°C
• Well suited for decoupling and filtering applications
• Available in High Capacitance values (up to 100μF)
PART NUMBER (SEE PAGE 4 FOR COMPLETE PART NUMBER EXPLANATION)
1210
4
D
Size
Voltage
(L” x W”)
4 = 4V
0101**
6 = 6.3V
0201
Z = 10V
0402
Y = 16V
0603
3 = 25V
0805
D = 35V
1206
5 = 50V
1210
1 = 100V
1812
**EIA 01005
107
Dielectric
D = X5R
Capacitance
Code (In pF)
2 Sig. Digits +
Number of
Zeros
M
A
T
2
A
Capacitance
Tolerance
K = ±10%
M = ± 20%
Failure
Rate
A = N/A
Terminations
T = Plated Ni
and Sn
Packaging
2 = 7” Reel
4 = 13” Reel
Special
Code
A = Std.
NOTE: Contact factory for availability of Tolerance Options for Specific Part Numbers.
Contact factory for non-specified capacitance values.
Insulation Resistance (Ohm-Farads)
TYPICAL ELECTRICAL CHARACTERISTICS
20
15
% Capacitance
10
0
-5
-10
-15
-20
-60
-40
-20
0
+20
+40
+60
+80
Temperature °C
26
10,000
Insulation Resistance vs Temperature
1,000
100
0
20
40
60
80
Temperature °C
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
TDS-SMDMLCC-0014 | Rev 1
– surface mount ceramic capacitor products –
100
120
X5R Dielectric
Specifications and Test Methods
Parameter/Test
Operating Temperature Range
Capacitance
X5R Specification Limits
-55ºC to +85ºC
Within specified tolerance
Measuring Conditions
Temperature Cycle Chamber
Dissipation Factor
≤ 2.5% for ≥ 50V DC rating
≤ 12.5% for 25V, 35V DC rating
≤ 12.5% Max. for 16V DC rating and lower
Contact Factory for DF by PN
Freq.: 1.0 kHz ± 10%
Voltage: 1.0Vrms ± .2V
For Cap > 10 µF, 0.5Vrms @ 120Hz
Insulation Resistance
10,000MΩ or 500MΩ - µF,
whichever is less
Charge device with rated voltage for 120 ± 5
secs @ room temp/humidity
Dielectric Strength
No breakdown or visual defects
Charge device with 250% of rated voltage for 1-5
seconds, w/charge and discharge current limited
to 50 mA (max)
Appearance
Resistance to
Flexure
Stresses
No defects
Capacitance
Variation
Dissipation
Factor
Insulation
Resistance
Capacitance
Variation
Dissipation
Factor
≤ ±7.5%
Meets Initial Values (As Above)
Insulation
Resistance
Meets Initial Values (As Above)
Dielectric
Strength
Meets Initial Values (As Above)
Appearance
No visual defects
Capacitance
Variation
Dissipation
Factor
Dissipation
Factor
Dip device in eutectic solder at 260ºC for
60seconds. Store at room temperature for 24 ±
2hours before measuring electrical properties.
Step 1: -55ºC ± 2º
30 ± 3 minutes
≤ ±7.5%
Step 2: Room Temp
≤ 3 minutes
Meets Initial Values (As Above)
Step 3: +85ºC ± 2º
30 ± 3 minutes
Meets Initial Values (As Above)
Step 4: Room Temp
≤ 3 minutes
Meets Initial Values (As Above)
Repeat for 5 cycles and measure after 24 ± 2
hours at room temperature
No visual defects
Capacitance
Variation
Load
Humidity
Dip device in eutectic solder at 230 ± 5ºC for 5.0
± 0.5 seconds
No defects,
很抱歉,暂时无法提供与“KAM15AR71H273JT”相匹配的价格&库存,您可以联系我们找货
免费人工找货