KC7050P156.250P30E00

Clock Oscillators Surface Mount Type KC7050P-P2/ KC7050P-P3 Series LV-PECL/ 3.3V or 2.5V/ 7.0×5.0mm Features How to Order KC7050P 125.000 P □ □ J 00 • Miniature ceramic package • Highly reliable with seam welding • LV-PECL output • Supply voltage VCC=3.3V, 2.5V • ±25×10−6 available • Low Phase Noise Table 1 Operating Freq. Tol. Temperature Code × 10−6 Range (°C) ± 50 0 ± 30 0 to +70 S ± 25 U ±100 F −40 to +85 ± 50 G ± 50 −40 to +105 6 RoHS Compliant Specifications Item Note Standard specifications Please contact us for available frequencies. Symbol Conditions Frequency Tolerance f_tol Initial tolerance, Operating temperature range, Rated power supply voltage change, Load change, Aging (1 year @25°C), Shock and vibration Storage Temperature Range T_stg Output Frequency Range fo Note1 Operating Temperature Range Phase Jitter — VCC ICC I_std SYM Tr/ Tf VOL VOH RL VIN VIL VIH t_dis t_ena t_str DJ JSigma JPK-PK Standard Specifications Extend (Option) 50ohm @crossing point @Minimum operating voltage to be 0 sec. Measured with Wavecrest SIA-3000 @156.25MHz VCC=3.3V ③ ④ ⑤ ⑥ ⑦ ①Series ②Output Frequency ③Output Type (LV-PECL) ④Supply Voltage (3 : 3.3V or 2 : 2.5V) ⑤Frequency Tolerance (See Table 1) ⑥Symmetry/ INH Function J : 45/ 55% ⑦Individual Specification (STD Specification is “00”.) 　 Packaging (Tape & Reel 1000 pcs./ reel) Specifications KC7050P-P2 KC7050P-P3 25 to 175 ±50/ −40 to +105°C ±100/ −40 to +85°C ±50/ −40 to +85°C ±50/ 0 to +70°C ±30/ 0 to +70°C ±25/ 0 to +70°C −55 to +125 0 to +70/ −40 to +85 −40 to +105 −0.5 to +5.0 +2.375 to +2.625 +2.97 to +3.63 70 max. 20 max. 50±5 50ohm JPhase ② BW : 12kHz to 20MHz Unit MHz ×10−6 °C °C V V mA μA % 0.6 max. ns Vcc−1.810 to Vcc−1.620 Vcc−1.025 to Vcc−0.880 50 0 to VCC 30% VCC max. 70% VCC min. 150 max. 10 max. 10 max. 2 max. 4 max. 30 max. V V ohm V V ns ms ms ps ps ps 0.3 max. ps Note  : All electrical characteristics are defined at the maximum load and operating temperature range. Note1: Please contact us for inquiry about operating temperature range, available frequencies and other conditions. Note2: DC characteristic (Unit: mm) 0.6 #5 #6 #3 #2 #1 1.17 1.6 (Unit: mm) 2.54 Plating: Ni+Au Tolerance: ±0.2 #1 #2 #3 #4 #5 #6 Pad Connections INH NC Case GND Output Complementary Output VCC Pad1 Open "H" Level "L" Level INH Function Pad4/ Pad5 (Output) Active Active High Z (No-Oscillation) 1.6 5.08 #4 2.54 Recommended Land Pattern 3.6 1.4 2.46 7.0 5.0 Dimensions 0.75 Crystal Oscillators Max. Supply Voltage Supply Voltage Current Consumption Stand-by Current Symmetry Rise/ Fall Time (20% VCC to 80% VCC Maximum Loaded) Low Level Output VoltageNote2 High Level Output VoltageNote2 Output Load Input Voltage Range Low Level Input Voltage High Level Input Voltage Disable Time Enable Time Start-up Time Deterministic Jitter 1 Sigma Jitter Peak to Peak Jitter T_use ① 2.54 1.6 Note: 0.01µF and 10µF capacitor between Vcc and GND is recommended for bypass purpose. As of December 2019