KC7050T312.500P30E00

SAW Clock Oscillators Surface Mount Type KC7050T-P3 Series LV-PECL/ 3.3V/ 7.0×5.0mm Features • Excellent Jitter performance • Complementary LV-PECL outputs • Operation at fundamental high frequency • ±50×10−6 Available Table 1 Freq. Tol. Code × 10−6 ±100 1 RoHS Compliant 0 ± 50 A ±100 Operating Temperature Range (°C) 0 to +70 Note Standard specifications With only certain −5 to +85 frequencies How to Order KC7050T 312.500 P 3 1 E 00 ① ② ③④⑤⑥ ⑦ ① Type (7.0×5.0mm SMD) ② Output Frequency ③ Output Type (PECL) ④ Supply Voltage (3.3V) ⑤ Frequency Tolerance (See Table 1) ⑥ Symmetry/ INH Function (45/ 55%, Stand-by) ⑦ Customer Special Model Suffix (STD Specification is “00”)   Packaging (Tape & Reel 1000 pcs./ reel) Specifications Item Output Frequency RangeNote1 Frequency ToleranceNote2 Symbol fo T_stg T_use — VCC Standard Specifications 3.3V ICC SYM 50ohm @crossing point tr/ tf Note3 Low Level Output Voltage VOL High Level Output VoltageNote3 VOH Output Load Input Voltage Range Low Level Input Voltage High Level Input Voltage Disable Time Enable Time Start-up Time Deterministic Jitter (DJ) 1 Sigma Jitter Peak to Peak Jitter Initial tolerance, Operating temperature range, Rated Op. Temp.: 0 to +70°C power supply voltage change, Load change, Aging Op. Temp.: 0 to +70°C (1 year @25°C), Shock and vibration Op. Temp.: −5 to +85°C f_tol Storage Temperature Range Operating Temperature Range Max. Supply Voltage Supply Voltage Current Consumption (Standard Loaded) Symmetry Rise/ Fall Time (20% to 80% Output Level Standard Loaded) Conditions 50ohm RL VIN VIL VIH t_dis t_ena t_str DJ JSigma JPK-PK 0 to +85°C/ Typ. 1.600V −5 to 0°C/ Typ. 1.605V 0 to +85°C/ Typ. 2.350V −5 to 0°C/ Typ. 2.295V LV-PECL Output @Minimum operating voltage to be 0 sec. Measured with Wavecrest DTS-2079 VISI 6.3.1 Min. 150 −50 −100 −100 −55 0 −0.5 2.97 Max. 700 +50 +100 +100 +125 +70 +5 3.63 Units MHz — 90 mA 45 55 % — 600 ps VCC−1.810 VCC−1.620 VCC−1.830 VCC−1.555 VCC−1.025 VCC−0.880 VCC−1.085 VCC−0.900 50 0 VCC — 30% VCC 70% VCC — — 200 — 10 — 10 0.2 typ. 2 typ. 20 typ. ×10−6 °C °C V V V ohm V V V ns ms ms ps ps ps Note : All electrical characteristics are defined at the maximum load and operating temperature range. Note1: Please contact us for inquiry about operating temperature range, available frequencies and other conditions. Note2: Aging (10 years @25°C) can correspond. Note3: DC characteristic Dimensions (Unit: mm)  Recommended Land Pattern (Unit: mm)              3ODWLQJ1L+$X 7ROHUDQFH± 3DG&RQQHFWLRQV  ,1+  1&  &DVH*1'  2XWSXW  &RPSOHPHQWDU\2XWSXW  9&& ,1+)XQFWLRQ  3DG 3DG3DG2XWSXW  23(1 $FWLYH +/HYHO $FWLYH //HYHO +LJK=1R2VFLOODWLRQ Note: A capacitor of value 0.01MF and 10MF between VCC and GND is recommended.