KGM31AR72E104KU

X7R Dielectric, KGM Series General Specifications The X7R dielectric is the most popular of the intermediate EIA class II materials due to its relative temperature stability. While the capacitance change is non-linear, temperature variation is within ±15% from - 55°C to + 125°C. Capacitance for X7R varies under the influence of electrical operating conditions such as voltage and frequency. X7R dielectric chip usage covers a broad spectrum of industrial applications where known changes in capacitance due to applied voltages are acceptable. SpiCAT is an additional online resource that KAVX offers to help create engineering simulations. Please visit spicat. kyocera-avx.com for more information. HOW TO ORDER KGM 03 A R7 1E 101 M N Series General Purpose Tin/Nickel Finish Size 02= 01005 32= 1210 03= 0201 43= 1812 05= 0402 44= 1825 15= 0603 55= 2220 21= 0805 56= 2225 31= 1206 Thickness See Cap Chart Dielectric R7 = X7R Voltage 0G = 4.0V 1H = 50V 0J = 6.3V 2A = 100V 1A = 10V 2D = 200V 1C = 16V 2E = 250V 1E = 25V 2H = 500V Capacitance Code Code (in pF) 2 Significant Digits + Number of zeros eg. 106 = 10µF 103 = 10nF Capacitance Tolerance J* = +/- 5% K = +/- 10% M = +/- 20% Packaging See Table Below PACKAGING CODES Code EIA (inch) IEC(mm) 7" Paper 02 01005 0402 H 7" Embossed 13" Paper 03 0201 0603 H 05 0402 1005 H N 15 0603 1608 T M *≤1μF only, contact factory for additional values 13"Embossed N 21 0805 2012 T U M L 31 1206 3216 T U M L 32 1210 3225 U L 43 1812 4532 V S 44 1825 4564 V S 55 2220 5750 V S 56 2225 5763 V S *Note: The thickness determines if packaging is paper or embossed. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-SMDMLCC-0038 | Rev 5 – surface mount ceramic capacitor products – 1 X7R Dielectric, KGM Series Specifications and Test Methods Parameter/Test Operating Temperature Range Capacitance X7R Specification Limits -55ºC to +125ºC Within specified tolerance Dissipation Factor / Tanδ Refer to https://spicat.kyocera-avx.com for individual part number specification Insulation Resistance Dielectric Strength Bending Strength Solderability Appearance Capacitance Variation Dissipation Factor / Tanδ Resistance to Solder Heat Insulation Resistance Withstanding Voltage / Dielectric Strength Appearance Capacitance Variation Dissipation Factor Thermal Shock Insulation Resistance Withstanding Voltage / Dielectric Strength Appearance Capacitance Variation Dissipation Factor / Tanδ Load Life Insulation Resistance Appearance Capacitance Variation Dissipation Factor / Tanδ Load Humidity Insulation Resistance Appearance Termination Strength Appearance Capacitance Vibration Tanδ Heat Treatment Measuring Conditions (Complies with JIS C5101 / IEC60384) Temperature Cycle Chamber Measure after heat treatment Capacitance Frequency Volt C≤10µF Frequency : 1kHz±10% Volt : 1.0±0.2Vrms *0.5±0.2Vrms C>10µF Frequency : 120Hz±10% Volt : 0.5±0.2Vrms The charge and discharge current of the capacitor must not exceed 50mA. Apply the rated voltage for 1 minute, and measure it in normal temperaRefer to https://spicat.kyocera-avx.com for ture and humidity. The charge and discharge current of the capacitor must individual part number specifiction not exceed 50mA. Charge device with 250% of rated voltage for 1-5 seconds, w/charge and No breakdown or visual defects discharge current limited to 50 mA (max) Note: Charge device with 150% of rated voltage for 500V devices. No significant damage with 1mm bending Glass epoxy PCB: Fulcrum spacing: 90mm, duration time 10 seconds. Soaking condition Solder coverage : 95% min. Sn-3Ag-0.5Cu 245±5℃ 3±0.5 sec. No problem observed Take the initial value after heat treatment. Soak the sample in 260℃±5℃ solder for 10±0.5 seconds and place in nor≤ ±7.5% mal temperature and humidity, and measure after heat treatment. Within specification (Pre-heating conditions) Within specification Order Temperature Time 1 80 to 100℃ 2 minutes 2 150 to 200℃ 2 minutes Resist without problem The charge and discharge current of the capacitor must not exceed 50mA for IR and withstanding voltage measurement. No visual defects Take the initial value after heat treatment. (Cycle) ≤ ±7.5% Room temperature (3 min.)―> Within specification Lowest operation temperature (30 min.)―> Within specification Room temperature (3 min.)―> Highest operation temperature(30 min.) After 5 cycles, measure after heat treatment. Resist without problem The charge and discharge current of the capacitor must not exceed 50mA for IR and withstanding voltage measurement. No visual defects Take the initial value after heat treatment. After applying *1.5 the rated voltage at the highest operation ≤ ±12.5% temperature for 1000+12/ −0 hours, and measure the sample after heat ≤ Initial Value x 2.0 (See Above) treatment in normal temperature and humidity. The charge and discharge current of the capacitor must not exceed Over 1000MΩ or 50MΩ · µF, whichever is less. 50mA for IR measurement. *Exceptions Listed Below *Apply 1.0 times when the rated voltage is 4V or less. Applied voltages for respective products are indicated in the chart below. No visual defects Take the initial value after heat treatment. After applying rated voltage for 500+12/ −0 hours in the condition of ≤ ±12.5% 40℃ ± 2℃ and 90 to 95%RH, and place in normal temperature and Within specification humid- ity, then measure the sample after heat treatment. Over 1000MΩ or 50MΩ · µF, whichever is less. The charge and discharge current of the capacitor must not exceed *Exceptions Listed Below 50mA for IR measurement. No problem observed Microscope Apply a sideward force of 500g (5N) to a PCB-mounted sample. note : No problem observed 2N for 0201 size, and 1N for 01005 size. No problem observed Take the initial value after heat treatment. Vibration frequency: 10 to 55 (Hz) Within tolerance Amplitude: 1.5mm Sweeping condition: 10 ―> 55 ―> 10Hz/ 1 minute in X, Y and Z Within tolerance directions: 2 hours each, 6 hours in total, and place in normal temperature and humidity, then measure the sample after heat treatment. Expose sample in the temperature of 150+0/ −10℃ for 1 hour and leave the sample in normal temperature and humidity for 24±2 hours. Voltage to be applied in the High Temperature Load (Applied voltage is the multiple of the rated voltage) Rated Voltage ×1.0 Products 16V KGM21AR71C475 Insulation Resistance : Over 10MΩ･μF R7 2 05 15 21 31 KGM05AR70J474 KGM15AR71E105 KGM21AR71C475 KGM31AR71E106, KGM31AR71H475 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-SMDMLCC-0038 | Rev 5 – surface mount ceramic capacitor products – X7R Dielectric, KGM Series Capacitance Range SIZE Soldering Packaging (L) Length W) Width (t) Terminal mm (in.) mm (in.) mm (in.) WVDC Cap (pF) 100 101 01005 Reflow Only All Paper 0.40 ± 0.02 (0.016 ± 0.0008) 0.20 ± 0.02 (0.008 ± 0.0008) 0.10± 0.04 (0.004 ± 0.0016) 16 6.3 A A 150 151 A 220 221 A 330 331 A 470 471 A 680 681 A 1000 102 A 1500 152 A 2200 222 A A A A A A A A A A A A A A A 3300 332 3900 392 4700 472 5600 562 6800 682 Cap 0.010 103 (μF) 0.012 123 0201 Reflow Only All Paper 0.60 ± 0.03 (0.024 ± 0.001) 0.30 ± 0.03 (0.011 ± 0.001) 0.15 ± 0.05 (0.006 ± 0.002) 0.015 153 0.018 183 A 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.068 683 0.082 823 A 0.1 104 0.12 124 0.15 154 0.22 224 0.33 334 0.47 474 0.68 684 1.0 105 2.2 225 4.7 475 0402 Reflow/Wave All Paper 1.00 ± 0.10 (0.040 ± 0.004) 0.50 ± 0.10 (0.020 ± 0.004) 0.25 ± 0.15 (0.010 ± 0.006) 0603 Reflow/Wave Paper/Embossed 1.60 ± 0.15 (0.063 ± 0.006) 0.81 ± 0.15 (0.032 ± 0.006) 0.35 ± 0.15 (0.014 ± 0.006) 0805 Reflow/Wave Paper/Embossed 2.01 ± 0.20 (0.079 ± 0.008) 1.25 ± 0.20 (0.049 ± 0.008) 0.50 ± 0.25 (0.020 ± 0.010) 10 16 25 50 6.3 10 16 25 50 100 6.3 10 16 25 50 100 200 A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A A B A A A A A A A A A A A B A A A A A A A A A A B B A A A A A A A A A A B B A A A A A A A A A A A A B B A A A A A A A A A B B A A A A A A A A B B B A A A A A A A A B B B A A A A A A A A B B B A A A A C A A A B B B A A A A C A A A B B B A A A A C A A A B B B A A A B B A A A A A A A B B A A A A A B B B B B B B B B A A B B B B B B B B A A B B B B C B B C C 10 106 1206 Reflow/Wave Paper/Embossed 3.20 ± 0.30 (0.126 ± 0.012) 1.60 ± 0.30 (0.063 ± 0.012) 0.50 ± 0.25 (0.020 ± 0.010) 250 6.3 10 16 25 50 100 200 B B B N N N N N N B N N N N N N B N N N N N N B N N N N N N B N N N N N N B N N N N N N B N N N N N N B N N N N N A B N N N N N A B N N N N N A B N N N N N A B N N N N N A B N N N N N A B N N N N N A B N N N N A A B N N N N A A B N N N N A A N N N N A A N N N N A A N N N N A A N N N N A A N N N N A A N N N N A A N N N N A A N N N E A E E E E A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A 250 500 B B N B N B N B N B N B N B N B A A A A A A A A A A A A A A A A A A A A A A A A 22 226 6.3 10 16 25 50 100 200 250 500 B B B B B B B B B B B B B B B B B B B B B B B B B V V V H H H H H H A B B B B B B B B B B B B B B B B B B B B B B B B B V V V H H H H H H A B B B B B B B B B B B B B B B B B B B B B B B B B V V V H H H H H A B B B B B B B B B B B B B B B B B B B B B B B B B M M M H H H H A A B B B B B B B B B B B B B B B B B B B B B B B B B M M P H H H H A H B B B B B B B B B B B B B B B B B B B B B D D D D A A A A H H H T T T T T T T T T T T T D D D D D D A A A A A A A A A T T T T T T T T T T T T D D D D D D A A A A A A A A A D D D D D D D D D D D D D D D D A A A A A 47 476 100 107 6.3 10 16 25 50 6.3 10 16 25 50 100 6.3 10 16 25 50 100 200 250 6.3 10 16 25 50 100 200 250 500 6.3 10 16 25 50 100 200 250 500 WVDC 16 SIZE 01005 0201 0402 Case Size 01005 (KGM 02) 0201 (KGM03) Thickness Letter Max Thickness (mm) Carrier Tape Packaging Code 7"reel Packaging Code 13"reel A 0.22 PAPER H n/a A 0.33 PAPER H N 0603 0402 (KGM05) 0603 (KGM15) 0805 1206 0805 (KGM21) A C A B C N 0.55 0.70 0.90 0.95 1.00 1.00 PAPER PAPER PAPER PAPER PAPER H H T T T T N N M M M M PAPER E 1.35 EMB U L A 1.45 EMB U L 1206 (KGM31) B 0.94 PAPER T M V 1.22 EMB U L M 1.25 EMB U L T P D 1.35 1.40 1.45 EMB EMB EMB U U U L L L EMBOSSED (EMB) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-SMDMLCC-0038 | Rev 5 – surface mount ceramic capacitor products – A 1.80 EMB U L H 1.90 EMB U L 3 X7R Dielectric, KGM Series Capacitance Range SIZE Soldering Packaging mm (in.) mm W) Width (in.) mm (t) Terminal (in.) WVDC Cap 100 101 (pF) 150 151 220 221 330 331 470 471 680 681 1000 102 1500 152 2200 222 3300 332 3900 392 4700 472 5600 562 6800 682 Cap 0.010 103 (μF) 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.068 683 0.082 823 0.100 104 0.120 124 0.150 154 0.220 224 0.330 334 0.470 474 0.680 684 1.000 105 2.200 225 4.700 475 10 106 22 226 47 476 100 107 WVDC SIZE (L) Length 1210 Reflow Only Paper/Embossed 3.30 ± 0.4 (0.130± 0.016) 2.50 ± 0.30 (0.098 ± 0.012) 0.50 ± 0.25 (0.020 ± 0.010) 25 50 100 10 16 R R R R R R R R R R R R R R R R R R R R R R R R R E E E E E E L L L L L R R R R R R R R R R R R R R R R R R R R R R R R R E E E E E E L L L A R R R R R R R R R R R R R R R R R R R R R R R R R E E E E E E L L L L R R R R R R R R R R R R R R R R R R R R R R R R R E E E E E E L L A 10 16 25 50 1210 Case Size Thickness Letter Max Thickness (mm) Carrier Tape Packaging Code 7"reel Packaging Code 13"reel 4 200 500 R R R R R R R R R R R R R R R R R R R R R R R R R E E H L L L L R R R R R R R R R R R R R R R R E E E E E H H H H L L L L L D D D D D D D E E E E E E E E E E H H H H P P P 100 200 500 16 1812 Reflow Only All Embossed 4.50 ± 0.40 (0.177 ± 0.016) 3.20 ± 0.40 (0.126 ± 0.016) 0.61 ± 0.36 (0.024 ± 0.014) 25 50 100 200 A A A A A A A A A A A A A A A A A A A A A A A A A A A A F F F J J A A A A A A A A A A A A A A A A A A A A A A A A A A A A F F F J J A A A A A A A A A A A A A A A A A A A A A A A A A A A A F F F J J 16 25 50 100 1812 A A A A A A A A A A A A A A A A A A A A A A B B B B B F F F J J 1210 (KGM 32) R 1.05 EMB U L D 1.4 EMB U L E 1.45 EMB U L H 1.8 EMB U L P 2.2 EMB U L 500 A A A A A A A A A A A A A A A A A A A B B B B B F F F F J J A A A B B B B B B B B B B B B B B B B B F F F J J J J J 200 500 1825 Reflow Only All Embossed 4.50 ± 0.40 (0.177 ± 0.016) 6.40 ± 0.40 (0.252 ± 0.016) 0.61 ± 0.36 (0.024 ± 0.014) 50 100 200 500 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C F 50 1812 (KGM 43) A 2.70 EMB U L L 2.80 EMB U L A 1.4 EMB V S B F J 1.45 2.21 2.80 EMB EMB EMB V V V S S S EMBOSSED(EMB) C C C C C C C C C C C C C C C C C C C C C C C C C C C C F F 25 2220 Reflow Only All Embossed 5.70 ± 0.50 (0.224 ± 0.020) 5.00 ± 0.40 (0.197 ± 0.016) 0.64 ± 0.39 (0.025 ± 0.015) 50 100 200 C C C C C C C C C C C C C C C C C C C C C C C C C Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z C D Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z C D Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z D H Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z C Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z C D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D G 500 25 50 100 2220 200 500 50 C C C C C C C C C C C C C C C C C C C C C C C C C C C F 100 200 1825 1825 (KGM 44) C 2.21 EMB V S F 2.80 EMB V S 2220 (KGM 55) Z 2.21 EMB V S C 2.80 EMB V S D 3.3 EMB V S TDS-SMDMLCC-0038 | Rev 5 D D D D D D D D D D D D D D D D D D D D D D D D D D D D G G D 2.21 EMB V S D D D D D D D D D D D D D D D D D D D D D D D D D D D G 100 200 2225 2225 (KGM56) H 3.4 EMB V S The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. – surface mount ceramic capacitor products – 500 2225 Reflow Only All Embossed 5.70 ± 0.40 (0.224 ± 0.016) 6.30 ± 0.40 (0.248 ± 0.016) 0.64 ± 0.39 (0.025 ± 0.015) 50 100 200 500 G 2.80 EMB V S D D D D D D D D D D D D D D D D D D D D D D D D D G 500