RF Microwave Products
091222
IMPORTANT INFORMATION/DISCLAIMER
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet
or made available on the website are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time
the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented
without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KYOCERA AVX knowledge of typical operating
conditions for such applications, but are not intended to constitute and KYOCERA AVX specifically disclaims
any warranty concerning suitability for a specific customer application or use.
ANY USE OF PRODUCT OUTSIDE OF SPECIFICATIONS OR ANY STORAGE OR INSTALLATION
INCONSISTENT WITH PRODUCT GUIDANCE VOIDS ANY WARRANTY.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by KYOCERA AVX with reference to the use of KYOCERA AVX products is given without
regard, and KYOCERA AVX assumes no obligation or liability for the advice given or results obtained.
Although KYOCERA AVX designs and manufactures its products to the most stringent quality and safety
standards, given the current state of the art, isolated component failures may still occur. Accordingly,
customer applications which require a high degree of reliability or safety should employ suitable designs
or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage.
Unless specifically agreed to in writing, KYOCERA AVX has not tested or certified its products, services or
deliverables for use in high risk applications including medical life support, medical device, direct physical
patient contact, water treatment, nuclear facilities, weapon systems, mass and air transportation control,
flammable environments, or any other potentially life critical uses. Customer understands and agrees that
KYOCERA AVX makes no assurances that the products, services or deliverables are suitable for any highrisk uses. Under no circumstances does KYOCERA AVX warrant or guarantee suitability for any customer
design or manufacturing process.
Although all product–related warnings, cautions and notes must be observed, the customer should not
assume that all safety measures are indicted or that other measures may not be required.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
121219
– rf microwave products –
RF/Microwave Products
Table of Contents
Thin-Film RF/Microwave Capacitor Technology
1206 High Performance Low Pass 12W........................................................184
Accu-P® Series
Thin-Film Technology.................................................................................... 2
Thin-Film Chip Capacitors............................................................................ 4
Single and Power Type Capacitors.............................................................. 5
0201 Typical Electrical Tables...................................................................... 6
0402 Typical Electrical Tables...................................................................... 8
0603 Typical Electrical Tables.................................................................... 10
0805 Typical Electrical Tables.................................................................... 12
1210 Typical Electrical Tables.................................................................... 14
High Frequency Characteristics................................................................. 16
Environmental / Mechanical Characteristics............................................22
Performance Characteristics RF Power Applications...............................23
Application Notes........................................................................................24
Ultra-Miniature 01005 Size.........................................................................27
1206 High Performance Low Pass 8W..........................................................203
Thin-Film RF/Microwave Inductor Technology
Accu-L® Series
L0201 Tight Tolerance RF Inductor............................................................30
L0402 Tight Tolerance RF Inductor............................................................32
AEC-Q200 High-Q RF Inductor - L0402 & L0805........................................34
L0603 AND L0805 SMD High-Q RF Inductor – Accu-L®. ..........................38
Environmental Characteristics................................................................... 42
Application Notes........................................................................................43
Thin-Film RF/Microwave Products
Designer Kits...............................................................................................45
Thin-Film RF/Microwave Directional Couplers
CP0302/CP0402/CP0603/CP0805 and DB0603N/DB0805 3dB 90°
CP0402W2700FNTR Wide Band High Directivity......................................49
High Directivity Directional Couplers For WiFi Bands...............................55
CP0402P High Directivity, Tight Coupling Tolerance................................57
CP0402 High Directivity LGA Termination................................................. 59
CP0603 High Directivity LGA Type.............................................................63
CP0402 / CP0603 High Directivity Couplers Test Jigs.............................69
LGA Couplers Design Kits........................................................................... 71
CP0603 SMD Type...................................................................................... 72
CP0603 SMD Type – High Directivity......................................................... 75
CP0805 SMD Type...................................................................................... 76
CP0805 Layout Types.................................................................................77
CP0805 and CP0603 Test Jig.................................................................... 81
DB0603N 3dB 90° Couplers........................................................................82
DB0805 3dB 90° Couplers..........................................................................99
Thin-Film RF/Microwave Filters
Low Pass – Harmonic Lead-Free
LP0402N Series – LGA Termination........................................................ 116
LP0402N Series – Test Jig....................................................................... 119
LP0603 Series – LGA Termination...........................................................120
LP0603 Series – Test Jig..........................................................................124
LP0805 Series – SMD Termination..........................................................125
LP0805 Series – Test Jig..........................................................................127
2816 High Performance Low Pass 20W . .....................................................218
BP0805 Band Pass Filter SMD 5W.................................................................234
BP1206 Band Pass Filter SMD 8W.................................................................248
Multilayer Organic (MLO®) Filters
MLO® High Pass Filters
General Information..................................................................................257
Electrical Specifications............................................................................258
MLO® Low Pass Filters
General Information..................................................................................277
Electrical Specifications............................................................................278
MLO® Band Pass Filters
General Information.................................................................................. 319
Electrical Specifications............................................................................ 319
MLO® X Band Filters
General Information..................................................................................356
Mechanical Specifications, Pad Layout, and Mounting Recommendations
Footprint A.................................................................................................366
Footprint B.................................................................................................369
Footprint C.................................................................................................372
Footprint D.................................................................................................375
Footprint E.................................................................................................378
Footprint E1...............................................................................................381
Footprint E2...............................................................................................384
Footprint F.................................................................................................387
Multilayer Organic (MLO®) Capacitors
General Information..................................................................................391
Mechanical & Environmental Specifications...........................................392
Multilayer Organic (MLO®) Diplexers
0603 WLAN/BT..........................................................................................395
0805 CDMA................................................................................................398
0805 WCDMA............................................................................................400
0805 WLAN................................................................................................402
0805 WLAN/BT..........................................................................................404
Automated SMT Assembly/SMT Reflow Profile.....................................406
Multilayer Organic (MLO®) Inductors
Tight Tolerance..........................................................................................407
High Current...............................................................................................409
Hi-Q............................................................................................................. 411
Performance Characteristics................................................................... 413
Automated SMT Assembly/SMT Reflow Profile..................................... 414
Multilayer Organic (MLO®) SMT Crossovers
RF-DC......................................................................................................... 415
RF-RF.......................................................................................................... 418
Automated SMT Assembly/SMT Reflow Profile.....................................421
RF/Microwave Inductors
Low Pass 0805 High Performance SMD 8W.................................................139
AL Series – Air Core Inductors.......................................................................422
1206 Harmonic Low Pass Filter.....................................................................182
AS Series – Square Air Core Inductors.........................................................429
LCWC Series – Wire Wound Chip Inductor....................................................435
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
RF/Microwave Products
Table of Contents
LCCI Series – Multi-Layer Ceramic Chip Inductors......................................436
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
100A Series Porcelain Superchip® Multilayer Capacitors.......................437
100B Series Porcelain Superchip® Multilayer Capacitors...................... 443
100C Series Porcelain Superchip® Multilayer Capacitors.......................450
100E Series Porcelain High RF Power Multilayer Capacitors.................455
180R Series NPO Porcelain Ultra-Low ESR . ...........................................461
200A Series BX Ceramic...........................................................................466
200B Series BX Ceramic...........................................................................470
530L Series Broadband Multilayer Capacitors........................................475
550-560 Series UBC™ Ultra-Broadband Capacitor..................................477
600L Ultra-Low ESR NPO Capacitors.......................................................484
600F Ultra-Low ESR, High Q, NPO Capacitors.........................................488
600S Ultra-Low ESR, High Q, NPO Capacitors.........................................492
700A Series NP0 Porcelain and Ceramic Multilayer Capacitors............497
700B Series NPO Porcelain and Ceramic Multilayer Capacitors...........503
700C Series NPO Porcelain and Ceramic Multilayer Capacitors........... 511
700E Series NPO Porcelain High RF Power Multilayer Capacitors........516
800A Series NP0 Porcelain, High RF Power Ultra-Low ESR ..................522
800B Series NP0 Porcelain, High RF Power Ultra-Low ESR . .................528
800C Series NP0 Porcelain, High RF Power Ultra-Low ESR ..................533
800E Series NPO Ceramic High RF Power Multilayer Capacitors..........537
800H Series NPO Ceramic High RF Power Multilayer Capacitors.........543
800R Series NPO Ceramic Ultra-Low ESR Multilayer Capacitors...........547
900C Series X7R Ceramic RF Power Multilayer Capacitors...................551
920C Series X7R Ceramic RF Power Multilayer Capacitors...................556
CDR Series — MIL-PRF-55681/4/5 (RF/Microwave Chips)....................558
Performance Curves.................................................................................561
Automatic Insertion Packaging................................................................566
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “CU” Series, C0G (NP0) Capacitors (RoHS)....................567
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (RoHS).......................569
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (Sn/Pb)......................572
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (RoHS)
Automotive, AEC Q200 Qualified..............................................................575
RF/Microwave “U” Series Designer Kits........................................................577
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Thin-Film RF/Microwave
Capacitor Technology
Accu-P® Series
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
1
Thin-Film RF/Microwave Capacitor Technology
Accu-P® Series
Thin-Film Technology
THE IDEAL CAPACITOR
The non-ideal characteristics of a real capacitor can be ignored at low
frequencies. Physical size imparts inductance to the capacitor and
dielectric and metal electrodes result in resistive losses, but these often
are of negligible effect on the circuit. At the very high frequencies of radio
communication (>100MHz) and satellite systems (>1GHz), these effects
become important. Recognizing that a real capacitor will exhibit inductive
and resistive impedances in addition to capacitance, the ideal capacitor for
these high frequencies is an ultra low loss component which can be fully
characterized in all parameters with total repeatability from unit to unit.
THIN-FILM TECHNOLOGY
Thin-film technology is commonly used in producing semiconductor devices.
In the last two decades, this technology has developed tremendously, both
in performance and in process control. Today’s techniques enable line
definitions of below 1μm, and the controlling of thickness of layers at 100Å
(10-2μm). Applying this technology to the manufacture of capacitors has
enabled the development of components where both electrical and physical
properties can be tightly controlled.
The thin-film production facilities at KYOCERA AVX consist of:
Until recently, most high frequency/microwave capacitors were based on
fired-ceramic (porcelain) technology. Layers of ceramic dielectric material
and metal alloy electrode paste are interleaved and then sintered in a
high temperature oven. This technology exhibits component variability in
dielectric quality (losses, dielectric constant and insulation resistance),
variability in electrode conductivity and variability in physical size (affecting
inductance). An alternate thin-film technology has been developed which
virtually eliminates these variances. It is this technology which has been fully
incorporated into Accu-P® and Accu-P® to provide high frequency capacitors
exhibiting truly ideal characteristics.
The main features of Accu-P® may be summarized as follows:
• Class 1000 clean rooms, with working areas under laminar-flow hoods
of class 100, (below 100 particles per cubic foot larger than 0.5μm).
• High vacuum metal deposition systems for high-purity
electrode construction.
• Photolithography equipment for line definition down to 2.0μm
accuracy.
• Plasma-enhanced CVD for various dielectric depositions
(CVD=Chemical Vapor Deposition).
• High accuracy, microprocessor-controlled dicing saws for
chip separation.
• High speed, high accuracy sorting to ensure strict tolerance adherence.
• High purity of electrodes for very low and repeatable ESR.
• Highly pure, low-K dielectric for high breakdown field, high insulation
resistance and low losses to frequencies above 40GHz.
• Very tight dimensional control for uniform inductance, unit to unit.
• Very tight capacitance tolerances for high frequency signal
applications.
This accuracy sets apart these Thin-Film capacitors from ceramic capacitors
so that the term Accu has been employed as the designation for this series
of devices, an abbreviation for “accurate.”
Orientation Marking
Alumina (Al 2O3)
Electrode
Seal
(SiNO)
Dielectric (SiO2 / SiNO)
Electrode
Alumina (Al 2O3)
Terminations
ACCU-P® CAPACITOR STRUCTURE
2
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012419
– rf microwave products –
Thin-Film RF/Microwave Capacitor Technology
Accu-P® Series
Thin-Film Technology
ACCU-P® TECHNOLOGY
APPLICATIONS
The use of very low-loss dielectric materials, silicon dioxide and silicon
oxynitride, in conjunction with highly conductive electrode metals results
in low ESR and high Q. These high-frequency characteristics change
at a slower rate with increasing frequency than for ceramic microwave
capacitors.
• Cellular Communications
• CT2/PCN (Cordless
Telephone/Personal Comm.
Networks)
• Satellite TV
• Cable TV
• GPS (Global Positioning
Systems)
• Vehicle Location Systems
• Vehicle Alarm Systems
• Paging
Because of the thin-film technology, the above-mentioned frequency
characteristics are obtained without significant compromise of properties
required for surface mounting.
The main Accu-P® properties are:
•
•
•
•
•
•
Internationally agreed sizes with excellent dimensional control.
Ultra small size chip capacitors (1005) are available.
Ultra tight capacitance tolerances.
Low ESR at VHF, UHF and microwave frequencies.
Enhanced RF power handling capablity.
High stability with respect to time, temperature, frequency and voltage
variation.
• Nickel/solder-coated terminations to provide excellent solderability
and leach resistance.
• Military
Communications
• Radar Systems
• Video Switching
• Test & Measurements
• Filters
• VCO’s
• Matching Networks
• RF Amplifiers
APPROVALS
• ISO 9001
• IATF 16949:2016
ACCU-P® FEATURES
Accu-P® meets the fast-growing demand for low-loss (high-Q) capacitors for
use in surface mount technology especially for the mobile communications
market, such as cellular radio of 450 and 900 MHz, UHF walkie-talkies, UHF
cordless telephones to 2.3 GHz, low noise blocks at 11-12.5 GHz and for
other VHF, UHF and microwave applications.
Accu-P® is currently unique in its ability to offer very low capacitance values
(0.05pF) and very tight capacitance tolerances (±0.01pF).
• The RF power handling capability of the Accu-P® allows for its usage in
both small signal and RF power applications.
• Thin Film Technology guarantees minimal batch to batch variability of
parameters at high frequency.
• Inspection test and quality control procedures in accordance with
ISO 9001, CECC, IECQ and USA MIL Standards yield products of the
highest quality.
• Hand soldering Accu-P®: Due to their construction utilizing relatively
high thermal conductivity materials, Accu-P’s have become the
preferred device in R & D labs and production environments where
hand soldering is used.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012521
– rf microwave products –
3
Thin-Film RF/Microwave Capacitor Technology
Accu-P® Series
Thin-Film Chip Capacitors
ACCU-P® (SIGNAL AND POWER TYPE CAPACITORS)
L
W
T
01005*
0201*
0402*
0603*
0805*
1210
0.405±0.020
(0.016±0.001)
0.215±0.020
(0.0085±0.002)
0.145±0.020
(0.006±0.001)
0.60±0.05
(0.023±0.002)
0.325±0.050
(0.0128±0.002)
0.225±0.050
(0.009±0.002)
1.00±0.1
(0.039±0.004)
0.55±0.07
(0.022±0.003)
0.40±0.1
(0.016±0.004)
1.60±0.1
(0.063±0.004)
0.81±0.1
(0.032±0.004)
0.63±0.1
(0.025±0.004)
2.01±0.1
(0.079±0.004)
1.27±0.1
(0.050±0.004)
0.93±0.2
(0.036±0.008)
3.02±0.1
(0.119±0.004)
2.5±0.1
(0.100±0.004)
0.93±0.2
(0.036±0.008)
0.00 -0.0 )
(0.004 +0.004
-0.000 )
0.15±0.05
(0.000±0.002)
0.10±0.10
(0.004±0.004)
(0.0 -0.0 )
(0.00 +0.004
-0.000 )
0.35±0.15
(0.014±0.006)
0.30±0.1
(0.012±0.004)
0.43±0.1
(0.017±0.004)
0.15±0.05
(0.006±0.002)
0.20±0.1
(0.008±0.004)
0.35±0.15
(0.014±0.006)
0.30±0.1
(0.012±0.004)
0.43±0.1
(0.017±0.004)
+0.1
B1
B2
+0.1
*Mount Black Side Up
DIMENSIONS: millimeters (inches)
HOW TO ORDER
0402
3
J
4R7
A
Size
Voltage
Te erature
Coefficient (1)
Capacitance
Capacitance
expressed in pF.
(2 significant
digits + number
of zeros)
for values 90% of end
termination
Terminal Strength
4 lbs. typ., 2 lb. min.
Military Approval
DSCC Drawing Number 05001
105 Megohms min. @ 25ºC at
rated WVDC
104 Megohms min. @ 125ºC at
rated WVDC
Working Voltage
(WVDC)
250 V
Dielectric Withstanding
Voltage (DWV)
250% of rated WVDC for 5 seconds
Aging Effects
None
Piezoelectric Effects
None
488
Case Size
PACKAGING OPTIONS
• Cellular Base Stations
• Broadband Wireless
Services
• Satellite
Communications
Insulation
Resistance (IR)
Series
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
TDS-RFM-0014 | Rev 1
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
600F Ultra-Low ESR, High Q, NPO Capacitors
CAPACITANCE VALUES
Value
(pF)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
Cap
Code
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R5
1R6
1R8
2R0
2R2
2R4
2R7
3R0
Marking
Tolerances
A9
H9
M9
d9
f9
m9
n9
t9
y9
A0
B0
C0
D0
E0
F0
G0
H0
J0
K0
L0
M0
A, B
A, B
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
Value
(pF)
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
15
18
20
22
24
27
Cap
Code
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
150
180
200
220
240
270
Marking
Tolerances
N0
P0
Q0
R0
S0
T0
U0
V0
W0
X0
Y0
Z0
A1
B1
C1
E1
G1
H1
J1
K1
L1
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Value
(pF)
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
150
180
200
220
240
Cap
Code
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
151
181
201
221
241
Marking
Tolerances
M1
N1
P1
Q1
R1
S1
T1
U1
V1
W1
X1
Y1
Z1
A2
B2
C2
E2
G2
H2
J2
K2
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
HOW TO ORDER
600
F
100
J
T
250
X**
T
Series
Packaging
Case Size
T = Tape and Reel, 500 pcs
T4K = Tape and Reel, 4000 pcs
TV = Vertical Tape and Reel, 500 pcs
See mechanical dimensions below
Capacitance Code
Laser Marking (Optional)
EIA Capacitance Code in pF.
Third digit = number of zeros or after “R” significant figures
Voltage Rating
Capacitance Tolerance Code
Code
Tol.
A
B
C
Termination Style Code
D
±0.05 pF ±0.1 pF ±0.25 pF ±0.5 pF
F
G
J
K
M
±1%
±2%
±5%
±10%
±20%
The above part number refers to a 600F Series (case size F) 10 pF capacitor, J tolerance (±5%), 250 WVDC, with T termination
(Tin Plated over Nickel Barrier, RoHS Compliant), Laser Marking and Tape and Reel packaging.
T = Tin Plated over Nickel Barrier
(RoHS Compliant)
TN = Tin Plated Non-Magnetic Barrier
W = Tin/Lead Solder Nickel Barrier
**Laser Marking is optional
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
TDS-RFM-0014 | Rev 1
– rf microwave products –
489
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
600F Ultra-Low ESR, High Q, NPO Capacitors
600F Series Data Sheet Condition Description
Capacitors horizontally mounted on 23.3 -mil thick Rogers R0435® softboard 52-mils wide 1/2 oz. Cu traces
FSR = lowest frequency at which S11 response, referenced at capacitor edge, crosses real axis on Smith Chart.
FPR = lowest frequency at which there is a notch in S21 magnitude response.
490
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
TDS-RFM-0014 | Rev 1
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
600F Ultra-Low ESR, High Q, NPO Capacitors
OUTLINE DIMENSIONS
Y
L (0805)
W
L: .079 ± .008 (2.01 ± 0.20)
W: .049 ± .008 (1.24 ± 0.20)
T: .051 max (1.30 max)
Y: .020 ± 0.01 (0.51 ± 0.25)
inches (mm)
T
L
SUGGESTED MOUNTING PAD DIMENSIONS
W
L
T
B
A
B
Case Size L, S, and F
Case Size
A Min.
B Min.
C Min.
D Min.
0402 (1005)
.0275
(0.70)
.0354
(0.90)
.0157
(0.40)
.0866
(2.20)
0603 (1608)
.0393
(1.00)
.0433
(1.10)
.0236
(0.60)
.110
(2.80)
0805 (2012)
.0590
(1.50)
.0512
(1.30)
.0236
(0.60)
.1259
(3.20)
inches (mm)
C
D
DESIGN KITS
Item #
Description
Cap. Value
Range (pF)
DK0032T
600F Series Ultra-low ESR,
High Q Microwave Capacitors
16 different values,
15 pcs. min. per value
0.1 to 2.0
DK0033T
600F Series Ultra-low ESR,
High Q Microwave Capacitors
16 different values,
15 pcs. min. per value
0.1 to 10
Kit 34T
DK0034T
600F Series Ultra-low ESR,
High Q Microwave Capacitors
16 different values,
15 pcs. min. per value
10 to 27
Kit 35T
DK0035T
600F Series Ultra-low ESR,
High Q Microwave Capacitors
7 different values,
15 pcs. min. per value
100 to 240
Kit #
Kit 32T
Kit 33T
RoHS
Compliant
Cap. Value (pF)
Tol. (pF)
0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8,0.9,
1.0, 1.1, 1.2, 1.5...............................................±0.1%
Price
$100.00
1.6, 1.8, 2.0......................................................±0.25%
1.0, 1.2, 1.5, 1.8, 2.0. 2.2, 2.4, 2.7, 3.0, 3.3.....±0.1%
3.9, 4.7, 5.6, 6.8, 8.2........................................±0.25%
$100.00
10.....................................................................±5%
10, 12, 15, 18, 20, 22, 24, 27............................±5%
$100.00
100, 120, 150, 180, 200, 220, 240...................±5
$55.00
For Online Kit Orders, Catalog & Application Notes, Visit: www.avx.com
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
TDS-RFM-0014 | Rev 1
– rf microwave products –
491
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
600S Ultra-Low ESR, High Q, NPO Capacitors
FEATURES
•
•
•
•
•
Lowest ESR in Class
Highest Working Voltage in Class - 250 V
Standard EIA Size: 0603
Laser Marking (Optional)
High Self-Resonance Frequencies
600 SERIES OVERVIEW
APPLICATIONS
Case Size
EIA Case Size
600
L
0402
600
S
0603
600
F
0805
PACKAGING OPTIONS
• Cellular Base Stations
• Broadband Wireless
Services
• Satellite
Communications
• Subscriber-based
Wireless Devices
• WiFi (802.11)
• Public Safety Radio
Tape & Reel
CIRCUIT
APPLICATIONS
Vertical
Orientation
Tape & Reel
LEAD-FREE COMPATIBLE
COMPONENT
ENVIRONMENTAL CHARACTERISTICS
• Filter Networks
• High Q Frequency
Sources
• Matching Networks
• Tuning, Coupling, Bypass
and DC Blocking
ELECTRICAL SPECIFICATIONS
Capacitance
0.1 to 100 pF
Tolerances
See Cap Value Chart
Working Voltage (WVDC)
250 V
Quality Factor (Q)
> 2000 @ 1 MHz
Operating
Temperature Range
-55°C to +125°C
Temperature Coefficient
of Capacitance (TCC)
0 ± 30 ppm/°C, -55°C to +125°
105 MΩ min. at +25°C at rated WVDC
104 MΩ min. at +125°C at rated WVDC
Dielectric Withstanding
Voltage (DWV)
2.5 x WVDC for 5 seconds
Aging
None
Piezo Effects
None
492
Series
Themal Shock
5 Cycles, -55ºC to 125ºC
Moisture Resistance
Mil-STD-202, Method 106
Life Test
2000 hours at 125ºC at 2X WVDC
Solderability
Solder Coverage > 90% of end
termination
Terminal Strength
4 lbs. typ., 2 lb. min.
Military Approval
DSCC Drawing Number 05002
(no derating of working voltage)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070121
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
600S Ultra-Low ESR, High Q, NPO Capacitors
CAPACITANCE VALUES
Value
(pF)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
Cap
Code
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R5
1R6
1R8
2R0
2R2
2R4
Marking
Tolerances
A9
H9
M9
d9
f9
m9
n9
t9
y9
A0
B0
C0
D0
E0
F0
G0
H0
J0
K0
A, B
A, B
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
Value
(pF)
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
15
18
Cap
Code
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
150
180
Marking
Tolerances
L0
M0
N0
P0
Q0
R0
S0
T0
U0
V0
W0
X0
Y0
Z0
A1
B1
C1
E1
G1
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
A, B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Value
(pF)
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
Cap
Code
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
Marking
Tolerances
H1
J1
K1
L1
M1
N1
P1
Q1
R1
S1
T1
U1
V1
W1
X1
Y1
Z1
A2
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
HOW TO ORDER
600
S
0R2
B
T
250
X**
T
Series
Packaging
Case Size
T = Tape and Reel, 500 pcs
T4K = Tape and Reel, 4000 pcs
TV = Vertical Tape and Reel, 500 pcs
See mechanical dimensions below
Capacitance Code
Laser Marking (Optional)
EIA Capacitance Code in pF.
Third digit = number of zeros or after “R” significant figures
Voltage Rating
Capacitance Tolerance Code
Code
Tol.
A
B
C
Termination Style Code
D
±0.05 pF ±0.1 pF ±0.25 pF ±0.5 pF
F
G
J
K
M
±1%
±2%
±5%
±10%
±20%
The above part number refers to a 600F Series (case size F) 10 pF capacitor, J tolerance (±5%), 250 WVDC, with T termination
(Tin Plated over Nickel Barrier, RoHS Compliant), Laser Marking and Tape and Reel packaging.
T = Tin Plated over Nickel Barrier
(RoHS Compliant)
TN = Tin Plated Non-Magnetic Barrier
W = Tin/Lead Solder Nickel Barrier
**Laser Marking is optional
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062821
– rf microwave products –
493
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
600S Ultra-Low ESR, High Q, NPO Capacitors
494
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120320
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
600S Ultra-Low ESR, High Q, NPO Capacitors
600F Series Data Sheet Condition Description
Capacitors horizontally mounted on 13.3 -mil thick Rogers R0435® softboard 29-mils wide 1/2 oz. Cu traces
FSR = lowest frequency at which S11 response, referenced at capacitor edge, crosses real axis on Smith Chart.
FPR = lowest frequency at which there is a notch in S21 magnitude response.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120320
– rf microwave products –
495
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
600S Ultra-Low ESR, High Q, NPO Capacitors
OUTLINE DIMENSIONS
Y
S (0603)
W
L: .063 ± .006 (1.60 ± 0.15)
W: .032 ± .006 (.81 ± 0.15)
T: .035 max (0.89 max)
Y: .014 ± .006 (0.36 ± 0.15)
inches (mm)
T
L
SUGGESTED MOUNTING PAD DIMENSIONS
W
L
T
B
A
B
Case Size L, S, and F
Case Size
A Min.
B Min.
C Min.
D Min.
0402 (1005)
.0275
(0.70)
.0354
(0.90)
.0157
(0.40)
.0866
(2.20)
0603 (1608)
.0393
(1.00)
.0433
(1.10)
.0236
(0.60)
.110
(2.80)
0805 (2012)
.0590
(1.50)
.0512
(1.30)
.0236
(0.60)
.1259
(3.20)
inches (mm)
C
D
DESIGN KITS
Kit #
Kit 25T
Kit 26T
Kit 27T
RoHS
Compliant
Item #
Description
Cap. Value
Range (pF)
DK0025T
600S Series Ultra-low ESR,
High Q Microwave Capacitors
16 different values,
15 pcs. min. per value
0.1 to 2.0
DK0026T
600S Series Ultra-low ESR,
High Q Microwave Capacitors
16 different values,
15 pcs. min. per value
0.1 to 10
DK0027T
600S Series Ultra-low ESR,
High Q Microwave Capacitors
16 different values,
15 pcs. min. per value
10 to 100
Cap. Value (pF)
0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8,0.9,
1.0, 1.1, 1.2, 1.5...............................................±0.1%
Price
$100.00
1.6, 1.8, 2.0......................................................±0.25%
1.0, 1.2, 1.5, 1.8, 2.0. 2.2, 2.4, 2.7, 3.0, 3.3.....±0.1%
3.9, 4.7, 5.6, 6.8, 8.2........................................±0.25%
$100.00
10.....................................................................±5%
10, 12, 15, 18, 20, 22, 24, 27, 30, 33, 39, 47
56, 68, 82, 100.................................................±5%
For Online Kit Orders, Catalog & Application Notes, Visit: www.avx.com
496
Tol. (pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
010621
– rf microwave products –
$100.00
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700A Series NP0 Porcelain and Ceramic Multilayer Capacitors
FEATURES
•
•
•
•
•
•
•
•
•
GENERAL DESCRIPTION
Case A Size (.055” x .055”)
Low ESR / ESL
High Q
Low Noise
Capacitance Range 0.1 pF to 1000 pF
Extended WVDC up to 250 VDC
Zero TCC
High Self-Resonance
Established Reliability (QPL)
PACKAGING OPTIONS
KYOCERA AVX, the industry leader, offers new improved
ESR/ESL performance for the 700 A Series RF/Microwave
Capacitors. The superior high self- resonance and zero TCC
characteristic of this Series provide excellent performance
over a broad range of RF and microwave applications
requiring minimum drift. High density porcelain and ceramic
constructions provide a rugged, hermetic package.
Tape & Reel
Vertical
Orientation
Tape & Reel
Cap-Pak®
(100 pcs)
Typical functional applications: Bypass, Coupling, Tuning and
DC Blocking.
Typical circuit applications: Filters, Oscillators and Timing
ELECTRICAL SPECIFICATIONS
ENVIRONMENTAL CHARACTERISTICS
Temperature Coefficient
(TCC)
0 ± 30 PPM/ºC
Themal Shock
Mil-STD-202, Method 107, Condition A
Capacitance Range
0.1 pF to 1000 pF
Mil-STD-202, Method 106
Operating Temperature
-55ºC to +125ºC*
Moisture
Resistance
Low Voltage
Humidity
Mil-STD-202, Method 103, condition A,
with 1.5 VDC applied while subjected to
an environment of 85ºC with 85% relative
humidity for 240 hours
Life Test
MIL-STD-202, Method 108, for 2000 hours, at
125°C. 200% WVDC applied.
Solderability
Mil-STD-202, Method 208
Terminal
Strength
Terminations for chips and pellets withstand
a pull of 5 lbs. min., 10 lbs. typical, for 5
seconds in direction perpendicular to the
termination surface of the capacitor.
Quality Factor
Greater than 10,000
(0.1 pF to 100 pF) @ 1 MHz.
Greater than 2000
(110 pF to 1000 pF) @ 1 MHz.
Insulation Resistance
(IR)
0.1 pF to 470 pF
106 Megohms min. @ 25ºC at rated
WVDC 105 Megohms min. @
125ºC at rated WVDC
510 pF to 1000 pF
105 Megohms min. @ 25ºC at rated
WVDC 104 Megohms min. @
125ºC at rated WVDC
Working Voltage (WVDC)
See Capacitance Values table
Dielectric Withstanding
Voltage (DWV)
250% of rated WVDC for 5 seconds
Aging Effects
None
Piezoelectric Effects
None
Capacitance Drift
± (0.02% or 0.02 pF), whichever
is greater
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
032521
– rf microwave products –
497
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700A Series NP0 Porcelain and Ceramic Multilayer Capacitors
CAPACITANCE VALUES
250
B, C,
D
150
B, C,
J, K,
M
250
F, G,
J, K,
M
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
Tol.
Rated
WVDC
STD. EXT.
VOLTAGE
Cap.
(pF)
250
F, G,
J, K,
M
150
EXTENDED
150
B, C,
D
Cap.
Code
VOLT.
B, C
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
Rated
WVDC
STD. EXT.
200
EXT.
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
Tol.
EXTENDED VOLTAGE ED
B
Cap. Cap.
Code (pF)
EXTENDED VOLTAGE
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
Rated
WVDC
STD. EXT.
EXTENDED VOLTAGE ED
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
Tol.
EXTENDED VOLTAGE
Cap. Cap.
Code (pF)
N/A
Cap.
Code
151
161
181
201
221
241
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
Cap.
(pF)
Tol.
Rated
WVDC
STD. EXT.
150
160
180
200
220
240
270
300
330
360
F, G,
390
J, K,
430
M
470
510
560
620
680
750
820
910
1000
150
N/A
50
vrms = 0.707 x WVDC
Special values, tolerances, higher WVDC and matching available. Please consult factory.
note: extended wvdc does not apply to cdr products.
Capacitance values in bold type indicate porcelain dielectric. All other capacitance values indicate ceramic dielectric.
All 700 A Capacitors are available laser marked with KYOCERA AVX identification, capacitance code and tolerance.
HOW TO ORDER
700
A
6R8
J
W
150
Series
T
Packaging
T = Tape and Reel, 500 pc qty
TV = Vertical Tape and Reel, 500 pc qty
Case Size
Please see last column of mechanical configuration table
for other options.
See mechanical dimensions below
Capacitance
Laser Marking (Optional)
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
Voltage Rating
Termination Style Code
Capacitance Tolerance Code
Code
Tol.
X
B
C
D
±.1 pF ±.25 pF ±.5 pF
F
G
J
K
M
±1%
±2%
±5%
±10%
±20%
Please see 2nd Column Mechanical
Configuration Table
The above part number refers to a 700A Series (case size A) 6.8 pF capacitor, J tolerance (+/-5%), 150 WVDC,
with W termination, (Tin/Lead, Solder Plated over Nickel Barrier), laser marking and Tape and Reel Packaging.
498
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062821
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700A Series NP0 Porcelain and Ceramic Multilayer Capacitors
MECHANICAL CONFIGURATION
Series &
Case Size
700A
700A
Outline ES
W/T is a
Termination
Surface
Term.
Case Size
MIL-PRF-55681
Code
& Type
W
P
CDR12BP
CDR12BP
A
Solder
Plate
A
Pellet
Y
W
T
L
Y
W
T
L
Body Dimensions
inches (mm)
Length (L)
Width (W)
Lead and Termination
Dimensions and Material
Thickness
(T)
.055+.015 -.010 .055 ±.015
(1.40+0.38-0.25) (1.40 ±0.38)
.055+.025 -.010 .055 ±.015
(1.40+0.64-0.25) (1.40 ±0.38)
.057
(1.45)
max.
700A
700A
T
CA
N/A
CDR11BP
A
Solderable
Nickel
Barrier
A
Gold Chip
Y
W
T
L
Y
W
L
T
.055+.015 -.010 .055 ±.015
(1.40+0.38-0.25) (1.40 ±0.38)
.055+.015 -.010 .055 ±.015
(1.40+0.38-0.25) (1.40 ±0.38)
Overlap (Y)
Materials
Pkg Type
T&R, 1000
or 500 pcs
Tin/ Lead, Solder
Vertical
Plated over Nickel T&R, 1000
Barrier Termination or 500 pcs
Cap Pac,
100 pcs
T&R, 1000
or 500 pcs
Heavy Tin/ Lead
Vertical
Coated, over Nickel T&R, 1000
Barrier Termination or 500 pcs
Cap Pac,
100 pcs
.010+.010 -.005
(0.25+0.25 -0.13)
T&R, 1000
or 500 pcs
RoHS Compliant
Vertical
Tin Plated over
T&R, 1000
Nickel Barrier
or 500 pcs
Termination
Cap Pac,
100 pcs
T&R, 1000
or 500 pcs
RoHS Compliant
Vertical
Gold Plated over
T&R, 1000
Nickel Barrier
or 500 pcs
Termination
Cap Pac,
100 pcs
Pkg Code
T1K or T
TV1K or
TV
C100
T1K or T
TV1K or
TV
C100
T1K or T
TV1K or
TV
C100
T1K or T
TV1K or
TV
C100
NON-MAGNETIC CONFIGURATION
Series &
Case Size
Term.
Case Size
MIL-PRF-55681
Code
& Type
Non-Magnetic
Configuration
Body Dimensions
inches (mm)
Length (L)
Width (W)
Lead and Termination
Dimensions and Material
Thickness
(T)
Overlap (Y)
Materials
Pkg Type
T&R, 1000
or 500 pcs
Tin/
Lead,
Solder
A
Y
Vertical
.055+.025 -.010 .055 ±.015
Plated over
WN
Meets
Non-Mag
W
T&R, 1000
700A
(1.40+0.64-0.25)
(1.40
±0.38)
Non-Magnetic
Requirements
Solder
T
L
or 500 pcs
Barrier Termination
Plate
Cap Pac,
100 pcs
T&R, 1000
or 500 pcs
Heavy Tin/ Lead
Y
Vertical
.057
A
.055+.025
-.010
.055
±.015
Coated,
over
Meets
.010+.010
-.005
W
T&R, 1000
700A
PN
(1.45)
Non-Mag
(1.40+0.64-0.25) (1.40 ±0.38)
Non-Magnetic
Requirements
(0.25+0.25 -0.13)
T
L
or 500 pcs
max.
Pellet
Barrier Termination
Cap Pac,
100 pcs
T&R, 1000
or 500 pcs
RoHS Compliant
A
Y
Vertical
.055+.015
-.010
.055
±.015
Tin
Plated
over
TN
Meets
Non-Mag
W
T&R, 1000
700A
(1.40+0.38-0.25) (1.40 ±0.38)
Non-Magnetic
Requirements Solderable
T
L
or 500 pcs
Barrier Termination
Barrier
Cap Pac,
100 pcs
*Capacitors with values greater than 100 pF contain a trace magnetic element that may exhibit weak magnetic properties.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062821
– rf microwave products –
Pkg Code
T1K or T
TV1K or
TV
C100
T1K or T
TV1K or
TV
C100
T1K or T
TV1K or
TV
C100
499
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700A Series NP0 Porcelain and Ceramic Multilayer Capacitors
SUGGESTED MOUNTING PAD DIMENSIONS
Case A
A Min.
.070
.050
.080
.060
Mount Type
Pad Size
Normal
Vertical Mount
High Density
Normal
Horizontal Mount
High Density
B Min.
.050
.030
.050
.030
C Min.
.030
.030
.030
.030
D Min.
.130
.090
.130
.090
Dimensions are in inches.
PERFORMANCE DATA
ESR VS. CAPACITANCE
SERIES 700, CASE A
Q VS. CAPACITANCE
SERIES 700, CASE A
10000
1
1000
Q
ESR (Ohms)
150 MHz
1000 MHz
0.1
500 MHz
500 MHz
1000 MHz
100
150 MHz
(Typical)
(Typical)
0.01
10
1
10
1
100
CAPACITANCE (pF)
(1.0 pF to 100 pF)
ESR VS. CAPACITANCE
SERIES 700, CASE A
1000
100
150 MHz
100
1000 MHz
500 MHz
Q VS. CAPACITANCE
SERIES 700, CASE A
Q
ESR (Ohms)
1
0.1
10
CAPACITANCE (pF)
(1.0 pF to 1000 pF)
500 MHz
150 MHz
10
1000 MHz
0.01
(Typical)
(Typical)
100
300
1
1000
100
CAPACITANCE (pF)
(110 pF to 100 pF)
500
300
CAPACITANCE (pF)
(110 pF to 1000 pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
113020
– rf microwave products –
1000
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700A Series NP0 Porcelain and Ceramic Multilayer Capacitors
PERFORMANCE DATA
SERIES RESONANCE VS. CAPACITANCE
SERIES 700, CASE A
100
CAPACITANCE CHANGE VS. TEMPERATURE
SERIES 700, CASE A
1
TCC= 0 ± 30 PPM/°C
% CHANGE IN CAPACITANCE
FREQUENCY (GHz)
0.8
10
1
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
(Typical)
-55
0.1
0.1
1
10
100
-35
-15
5
25
45
65
85
105
125
TEMPERATURE (°C)
1000
CAPACITANCE (pF)
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE A
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE A
10
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
40°C/W. A power dissipation of 1.5 W will result
in a case temperature of 125°C.
1000 MHz
500 MHz
The current rating is based on a 65°C mounting surface and a device
thermal resistance of 40°C/W. A power dissipation of 1.5 W will
result in a case temperature of 125°C.
RMS CURRENT (Amps)
RMS CURRENT (Amps)
10
150 MHz
1
150 MHz
500 MHz
1000 MHz
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
0.1
0.1
1
10
Dotted line = Power dissipation limited
1
100
100
CAPACITANCE (pF)
(0.1 pF to 100 pF)
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE A, EXTENDED VOLTAGE
10
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
40°C/W. A power dissipation of 1.5 W will result
in a case temperature of 125°C.
1
1000 MHz
1000
MHz
500 MHz
RMS CURRENT (Amps)
RMS CURRENT (Amps)
10
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE A, EXTENDED VOLTAGE
150 MHz
Typical
0.1
0.1
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
1
10
1000
CAPACITANCE (pF)
(120 pF to 1000 pF)
150 MHz
500 MHz
1000 MHz
1
(Typical)
0.1
100
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
40°C/W. A power dissipation of 1.5 W will result
in a case temperature of 125°C.
Dotted line = Power dissipation limited
10
CAPACITANCE (pF)
(1 pF to 56 pF)
100
CAPACITANCE (pF)
(62 pF to 100 pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
113020
– rf microwave products –
501
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700A Series NP0 Porcelain and Ceramic Multilayer Capacitors
SAMPLE KITS
Kit #
RoHS
Compliant
Item Number
Kit 4
-
DK0004
Kit 4T
Kit 5
DK0004T
-
Kit 5T
Kit 6
DK0005T
-
Kit 6T
Kit 7
Kit 7T
502
DK0005
DK0006
DK0006T
-
DK0007
DK0007T
Description
700A Porcelain and Ceramic
16 different values, 15 pc.
min. per value
Cap. Value
Range (pF)
Tol.
Price
0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9,
1.0, 1.1, 1.2, 1.5..................................................... ±0.1
0.1 to 2.0
$158.40
1.5, 1.8, 2.0............................................................ ±0.25
1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3,........... ±0.1
700A Porcelain and Ceramic
16 different values, 15 pc.
min. per value
1.0 to 10
700A Porcelain and Ceramic
16 different values, 15 pc.
min. per value
10 to 100
700A Porcelain and Ceramic
16 different values, 15 pc.
min. per value
Cap Value (pF)
3.9, 4.7, 5.6, 6.8, 8.2.............................................. ±0.25
$158.40
10........................................................................... ±5%
10, 12, 15, 18, 20, 22, 24, 27, 30, 33, 39,
47, 56, 68, 82, 100................................................. ± 5%
$158.40
100, 120, 150, 180, 200, 220, 240, 270
300, 330, 390, 470................................................. ±5%
100 to 1000
$158.40
560, 680, 820, 1000............................................... ±10
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
113020
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700B Series NPO Porcelain and Ceramic Multilayer Capacitors
FEATURES
•
•
•
•
•
•
•
•
•
GENERAL DESCRIPTION
KYOCERA AVX, the industry leader, is announcing new
improved ESR/ESL performance for the 700B Series RF/
Microwave Capacitors. The superior high self-resonance
and zero TCC characteristic of this Series provide excellent
performance over a broad range of RF and microwave
applications requiring minimum drift, including RF power.
Porcelain and ceramic construction provide a rugged,
hermetic package.
FUNCTIONAL APPLICATIONS
• Bypass
• Coupling
• Tuning
PACKAGING OPTIONS
Tape & Reel
CIRCUIT APPLICATIONS
• RF Power Amplifiers
ENVIRONMENTAL CHARACTERISTICS
Thermal Shock
Mil-STD-202, Method 107, Condition A
Moisture Resistance
Mil-STD-202, Method 106
Low Voltage
Humidity
Mil-STD-202, Method 103, condition A,
with 1.5 VDC applied while subjected to
an environment of 85ºC with 85% relative
humidity for 240 hours
Life Test
MIL-STD-202, Method 108, for 2000 hours, at
125°C. Voltage applied. 200% of WVDC for
capacitors rated at 500 volts DC or less.
120% of WVDC for capacitors rated at 1250
volts DC or less. 100% of WVDC for capacitors
rated above 1250 volts DC
Termination Styles
Available in various surface mount and leaded
styles. See Mechanical Configurations
Terminal Strength
Vertical
Orientation
Tape & Reel
Cap Pac®
(100 pcs)
ELECTRICAL SPECIFICATIONS
• Impedance Matching
• DC Blocking
• Timing Power Amplifiers
• Filters
• Oscillators
Case B Size (.110" x .110")
Capacitance Range 0.1 pF to 5100 pF
Extended WVDC up to 1500 VDC
Low ESR/ESL
High Q
Low Noise
Ultra-Stable Performance
High Self-Resonance
Established Reliability (QPL)
Terminations for chips and pellets withstand
a pull of 5 lbs. min., 15 lbs. typical, for 5
seconds in direction perpendicular to the
termination surface of the capacitor.
Temperature
Coefficient (TCC)
0 ±30 PPM/°C (-55°C to +125°C)
Capacitance Range
0.1 pF to 5100 pF
Operating
Temperature
0.1 to 200 pF: from -55°C to +175°C
220 to 5100 pF: from -55°C to +125°C
Quality Factor
Greater than 10,000
(1 pF to 200 pF) @ 1 MHz.
Greater than 2000
(220 pF to 1000 pF) @ 1 MHz.
Greater than 2000
(1100 pF to 5100 pF) @ 1 KHz.
Insulation
Resistance (IR)
0.1 pF to 470 pF:
106 Megohms min. @ +25°C at rated WVDC.
105 Megohms min. @ +125°C at rated WVDC.
510 pF to 5100 pF:
105 Megohms min. @ +25°C at rated WVDC.
104 Megohms min. @ +125°C at rated WVDC.
Working Voltage
(WVDC)
See Capacitance Values table
Dielectric
Withstanding
Voltage (DWV)
250% of WVDC for capacitors rated at 500
volts DC or less for 5 seconds. 150% of WVDC
for capacitors rated at 1250 volts DC or less
for 5 seconds. 120% of WVDC for capacitors
rated above 1250 Volts DC for 5 seconds
Aging Effects
None
Piezoelectric Effects
None
Capacitance Drift
± (0.02% or 0.02 pF), whichever is greater
Retrace
Less than ±(0.02% or 0.02 pF),
whichever is greater.
AVX 700B Series Capacitors are designed and manufactured to meet and
exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
072921
– rf microwave products –
503
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700B Series NPO Porcelain and Ceramic Multilayer Capacitors
CAPACITANCE VALUES
Rated
Rated
Rated WVDC CAP.
Cap. Cap.
Cap. Cap.
WVDC
WVDC
Tol.
Tol.
CODE
Code (pF)
Code (pF)
STD. EXT.
STD. EXT.
STD. EXT.
3R3
3.3
330
33
331
B
3R6
3.6
360
36
361
3R9
3.9
390
39
1500 391
B, C
431
4R3
4.3 B, C,
430
43
D
4R7
4.7
470
47
471
511
5R1
5.1
510
51
500
5R6
5.6
560
56
561
6R2
6.2
620
62
621
680
68
681
6R8
6.8
B,
C,
7R5
7.5
750
75
751
J, K,
8R2
8.2
820
82
821
M
9R1
9.1
910
91
911
F, G, J,
500 1500 100
1000 102
500 1500 101 100 K, M
10
110
11
111 110
112
B, C,
120
12
121 120
122
D
130
13
131 130
152
300
150
15
151 150
182
160
16 F, G, J,
161 160
222
K, M
180
18
181 180
272
200
20
201 200
302
220
22
221 220
332
240
24
241 240
392
200 N/A
270
27
271 270
472
300
30
301 300
512
CAP.
(pF)
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
330
360
390
430
470
510
560
620
680
750
820
910
F, G, J,
1000 K, M
1100
1200
1500
1800
2200
2700
3000
3300
3900
4700
5100
EXTENDED
VOLTAGE
EXT
EXTENDED VOLTAGE
EXTENDED VOLTAGE
EXTENDED VOLTAGE
EXTENDED VOLTAGE
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
VOLT
Cap. Cap.
Tol.
Code (pF)
TOL.
RATED WVDC
STD.
EXT.
200
150
N/A
50
SPECIAL VALUES, TOLERANCES, DIFFERENT WVDC AND MATCHING AVAILABLE. • ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY.
Capacitance values in bold type indicate porcelain dielectric. All other capacitance values indicate ceramic dielectric.
HOW TO ORDER
700
B
331
J
W
500
X
T
Series
Packaging
Case Size
T = Tape and Reel, 500 pc qty
TV = Vertical Tape and Reel, 500 pc qty
See mechanical dimensions below
Please see last Column Mechanical Configuration Table
for Box and Tray Options
Capacitance
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
Laser Marking (Optional)
Capacitance Tolerance Code
Termination Style Code
Code
Tol.
B
C
D
F
G
J
K
M
±.1 pF
±.25 pF
±.5 pF
±1%
±2%
±5%
±10%
±20%
Voltage Rating
Please see 2nd Column Mechanical
Configuration Table
The above part number refers to a 700B Series (case size B) 330 pF capacitor, J tolerance (±5%), 500 WVDC, with W termination
(Tin/Lead, Solder Plated over Nickel Barrier), laser marking and Tape and Reel packaging.
504
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
090221
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700B Series NPO Porcelain and Ceramic Multilayer Capacitors
MECHANICAL CONFIGURATION
Series
Term. MIL-PRF& Case
Code
55681
Size
B
700B
W
Y
CDR14BP
T
L
B
P
110+.025 -.010
.110 ±.015
(2.79 +0.64 -0.25) (2.79 ±0.38)
W
Solder Plate
700B
Body Dimensions
inches (mm)
Length
Width
(L)
(W)
Outline
W/T is a
Termination
Surface
Case Size
& Type
Y
CDR14BP
W
Pellet
T
L
Lead and Termination
Dimensions and Material
Thickness Overlap
(T)
(Y)
.102
(2.59)
max.
700B
T
N/A
B
700B
CA
W
Solderable
Nickel
Barrier
T
L
Y
CDR13BP
W
Gold Chip
T
L
.102
(2.59)
110+.025 -.010
.110 ±.015
(2.79 +0.64 -0.25) (2.79 ±0.38)
.102
(2.59)
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
110+.025 -.010
.110 ±.015
(2.79 +0.64 -0.25) (2.79 ±0.38)
.102
(2.59)
RoHS Compliant
Gold Plated over
Nickel Barrier Termination
LL
MS
AR
W
T
Pkg
Code
T&R, 1000 or
500 pcs
Vertical T&R,
1000 or
500 pcs
Cap Pac,
100 pcs
T1K
or T
TV1K
or TV
C100
T&R, 1000 or
500 pcs
Vertical T&R,
1000 or
500 pcs
Cap Pac,
100 pcs
T&R, 1000 or
500 pcs
Vertical T&R,
1000 or
500 pcs
Cap Pac,
100 pcs
T&R, 1000 or
500 pcs
Vertical T&R,
1000 or
500 pcs
Cap Pac,
100 pcs
T1K
or T
TV1K
or TV
C100
T1K
or T
TV1K
or TV
C100
T1K
or T
TV1K
or TV
C100
Width
(WL)
Thickness
(TL)
Cap Pac,
20 pcs
C20
Box, 20 or
100 pcs
B20 or
B100
Box, 20 or
100 pcs
B20 or
B100
Box, 20 or
100 pcs
B20 or
B100
Box, 20 or
100 pcs
B20 or
B100
TL
LL
WL
W
T
L
TL
LL
CDR22BP
Length
(LL)
.120
(3.05)
max.
TL
L
B
700B
T
WL
Microstrip
Pkg Type
W
L
LL
CDR21BP
.015
(0.38)
±.010
(0.25)
Heavy Tin/Lead Coated,
over Nickel Barrier Termination
TL
WL
B
700B
Tin/Lead, Solder Plated over
Nickel Barrier Termination
110+.025 -.010
.110 ±.015
(2.79 +0.64 -0.25) (2.79 ±0.38)
B
Y
Materials
WL
W
T
L
.135 ±.015
(3.43 ±0.38)
.250
.093 ±. 005 .004 ± .001
(6.35)
(2.36 ± 0.13) (.102 ± .025)
min.
Axial Ribbon
B
700B
RR
CDR24BP
Radial
Ribbon
WL
T
B
700B
RW
W
L
.500
(12.7)
WL
W
#26 AWG.,
.016 (.406) dia.nominal
.145 ±.020
(3.68 ±0.51)
• •
L
CDR25BP
Axial Wire
T
L
B
AW
T
N/A
.102
(2.59)
max.
LL
LL
CDR23BP
Radial Wire
700B
.110 ±.015
(2.79 ±0.38)
LL
W
L
LL
LL
T
.950
min.
W
T
L
W
Additional lead styles available: Narrow Microstrip (NM), Narrow Axial Ribbon (NA) and Vertical Narrow Microstrip (H). Other lead lengths are available; consult factory.
All leads are high purity silver attached with high temperature solder and are RoHS compliant.
• •
L
LL
T
W
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
111821
– rf microwave products –
505
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700B Series NPO Porcelain and Ceramic Multilayer Capacitors
MECHANICAL CONFIGURATION
Series
Term.
& Case
Code
Size
MIL-PRF55681
Case Size
& Type
Outline W/T is a
Termination Surface
B
700B
WN
Meets
Requirements
Y
L
B
700B
PN
Meets
Requirements
T
.110 +.020
.110 ±.015
-.010 (2.79
(2.79 ±0.38)
+0.51 -0.25)
T
.110 +.035
.110 ±.015
-.010 (2.79
(2.79 ±0.38)
+0.89 -0.25)
T
.110 +.020
.110 ±.015
-.010 (2.79
(2.79 ±0.38)
+0.51 -0.25)
W
Non-Mag
Solder Plate
Y
W
Non-Mag
Pellet
L
Body Dimensions
Lead and Termination
inches (mm)
Dimensions and Material
Length
Width
Thickness Overlap
Materials
(L)
(W)
(T)
(Y)
.102
(2.59)
max.
.015
(0.38)
±.010
(0.25)
B
700B
TN
Meets
Requirements
Y
W
Non-Mag
Solderable
Barrier
L
TL
LL
B
700B
700B
700B
700B
700B
MN
AN
FN
RN
BN
Meets
Requirements
Meets
Requirements
Meets
Requirements
Meets
Requirements
Meets
Requirements
WL
T
.120
(3.05)
max.
TL
LL
WL
W
T
L
TL
LL
WL
Non-Mag
Axial Ribbon
B
W
.135 ±.015
(3.43 ±0.38)
LL
W
L
.110 ±.015
(2.79 ±0.38)
WL
T
TL
LL
WL
T
L
LL
T
LL
Non-Mag
Axial Wire
B
W
L
L
WL
T
W
Thickness
(T )
.250
(6.35)
(6.35)
min.
.093 ±
.005
(2.36 ±
0.13
.004 ± .
001
(.102 ±
.025)
.500
(12.7)
min.
.145 ±.020
(3.68 ±0.51)
LL
Non-Mag
RadialWire
Width
(W )
L
LL
• •
T
L
W
W
L
L
N/A
.102
(2.59)
max.
W
Length
(L )
L
T
L
Non-Mag
Radial Ribbon
B
T&R, 1000 or
500 pcs
Tin / Lead, Solder Plated over Vertical T&R,
Non-Magnetic Barrier
1000 or
Termination
500 pcs
Cap Pac,
100 pcs
T&R, 1000 or
500 pcs
Heavy Tin / Lead, Coated over Vertical T&R,
Non-Magnetic Barrier
1000 or
Termination
500 pcs
Cap Pac,
100 pcs
T&R, 1000 or
500 pcs
RoHS Compliant
Vertical T&R,
Tin Plated over
1000 or
Non-Magnetic Barrier
500 pcs
Termination
Cap Pac,
100 pcs
T1K
or T
TV1K
or TV
C100
T1K
or T
TV1K
or TV
C100
T1K
or T
TV1K
or TV
C100
.950
min.
•
T
#26 AWG.,
.016 (.406) dia.
nominal
Cap Pac,
20 pcs
C20
Box, 20 or
100 pcs
B20 or
B100
Box, 20 or
100 pcs
B20 or
B100
Box, 20 or
100 pcs
B20 or
B100
Box, 20 or
100 pcs
B20 or
B100
*Capacitors with values greater than 200 pF contain a trace magnetic element that may exhibit weak magnetic properties.
** Additional lead styles available: Narrow Microstrip (DN), Narrow Axial Ri bon (GN) and Vertical Narrow Microstrip (HN). Other lead lengths are available; consult factory;
••
All leads are high purity silver attached with high temperature
solder and RoHS compliant.
LL
W
L
506
Pkg
Code
W
L
Non-Mag
Microstrip
B
Pkg Type
•
T
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070621
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700B Series NPO Porcelain and Ceramic Multilayer Capacitors
SUGGESTED MOUNTING PAD DIMENSIONS
Case B Vertical Mount
Pad Size
A Min.
B Min.
Normal
.065
.050
0.1 pF
High Density
.045
.030
Normal
.090
.050
0.2 pF
High Density
.070
.030
Normal
.110
.050
0.3 to 510 pF
High Density
.090
.030
Normal
.120
.050
> 510 pF
High Density
.100
.030
Cap Value
All Values
Normal
High Density
C Min.
.075
.075
.075
.075
.075
.075
.075
.075
D Min.
.175
.135
.175
.135
.175
.135
.175
.135
.075
.075
.175
.135
Horizontal Mount
.130
.050
.110
.030
PERFORMANCE DATA
1
ESR VS. CAPACITANCE
SERIES 700, CASE B
Q VS. CAPACITANCE
SERIES 700, CASE B
100000
150 MHz
1000 MHz
0.1
1000
Q
ESR (Ohms)
10000
500 MHz
500 MHz
1000 MHz
100
150 MHz
(Typical)
0.01
1
10
10
100
CAPACITANCE (pF)
(1.0 pF to 51 pF)
ESR VS. CAPACITANCE
SERIES 700, CASE B
1
1000
(Typical)
1
10
100
CAPACITANCE (pF)
(1.0 pF to 51 pF)
Q VS. CAPACITANCE
SERIES 700, CASE B
100
0.1
1000 MHz
1000 MHz
500 MHz
150 MHz
0.01
10
500 MHz
Q
ESR (Ohms)
150 MHz
10
(Typical)
100
CAPACITANCE (pF)
(56 pF to 200 pF)
(Typical)
1
10
1000
100
CAPACITANCE (pF)
(56 pF to 200 pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
010721
– rf microwave products –
1000
507
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700B Series NPO Porcelain and Ceramic Multilayer Capacitors
PERFORMANCE DATA
ESR VS. CAPACITANCE
SERIES 700, CASE B
1
Q VS. CAPACITANCE
SERIES 700, CASE B
100
ESR (Ohms)
150 MHz
500 MHz
Q
0.1
500 MHz
10
150 MHz
(Typical)
(Typical)
0.01
100
1000
1
100
10000
1000
SERIES RESONANCE VS. CAPACITANCE
SERIES 700, CASE B
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE B
100
RMS CURRENT (Amps)
FREQUENCY (GHz)
100
10
1
0.1
The current rating is based on 65°C mounting
surface and device thermal resistance (Ѳ) of
20°C/W. A power dissipation of 3 W will result
in a case temperature of 125°C.
10
1000 MHz
500 MHz
1
(Typical)
0.01
0.1
1
10
100
1000
10000
1
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
20°C/W. A power dissipation of 3 W will result
in a case temperature of 125°C.
RMS CURRENT (Amps)
RMS CURRENT (Amps)
10
150 MHz
500 MHz
1000 MHz
30 MHz
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
20°C/W. A power dissipation of 3 W will result
in a case temperature of 125°C.
30 MHz
10
150 MHz
500 MHz
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
100
CAPACITANCE (pF)
(56 pF to 200 pF)
100
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE B
100
100
1
10
30 MHz
CAPACITANCE (pF)
(0.1 pF to 51 pF)
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE B
508
150 MHz
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
0.1
0.1
CAPACITANCE (pF)
10
10000
CAPACITANCE (pF)
(220 pF to 5100 pF)
CAPACITANCE (pF)
(220 pF to 5100 pF)
1
100
1000
1000
CAPACITANCE (pF)
(220 pF to 5100 pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
010721
– rf microwave products –
10000
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700B Series NPO Porcelain and Ceramic Multilayer Capacitors
PERFORMANCE DATA
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE B, EXTENDED VOTAGE
CURRENT CHANGE VS. TEMPERATURE
SERIES 700, CASE B
100
TC = 0 ± 30 PPM/°C
RMS CURRENT (Amps)
% CHANGE IN CAPACITANCE
1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
10
500 MHz
1000 MHz
-35
-15
5
25
45
65
85
105
0.1
125
30 MHz
150 MHz
1
-0.8
-1
-55
Dotted Line = Power dissipation limited
Solid line = Voltage limited (Vrms)
0.1
1
10
100
CAPACITANCE (pF)
(0.1 pF to 51 pF)
TEMPERATURE (°C)
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE B, EXTENDED VOTAGE
100
RMS CURRENT (Amps)
The current rating is based on a 65 °C mounting surface with a
device thermal resistance (θ) of 20 °C/W. A power dissipation
of 3 W will result in a case temperature
The current rating is based on a 65°C mounting surface with a
device thermal resistance (θ) dissipation of 3 W will result in a
case temperature of 125°C
30 MHz
150 MHz
10
500 MHz
1
10
1000 MHz
100
1000
CAPACITANCE (pF)
(56 pF to 200 pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
010721
– rf microwave products –
509
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700B Series NPO Porcelain and Ceramic Multilayer Capacitors
SAMPLE KITS
Kit #
RoHS
Compliant
Item Number
Kit 11
-
DK0011
Kit 11T
Kit 12
DK0011T
-
Kit 12T
Kit 13
Kit 13T
510
DK0012
DK0012T
-
DK0013
DK0013T
Description
Cap. Value
Range (pF)
Cap Value (pF)
Tol.
Price
1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3............ ±0.1
700B Porcelain and Ceramic
16 different values,
15 pcs. min. per value
1.0 to 10
700B Porcelain and Ceramic
16 different values,
15 pcs. min. per value
10 to 100
700B Porcelain and Ceramic
16 different values,
15 pcs. min. per value
100 to 1000
3.9, 4.7, 5.6, 6.8, 8.2 3.9, 4.7, 5.6, 6.8, 8.2............ ±0.25
$165.00
10........................................................................... ±5%
10, 12, 15, 18, 20, 22, 24, 27, 30,
33, 39, 47, 56, 68, 82, 100..................................... ±5%
100, 120, 150, 180, 200, 220, 240, 270,
300, 330, 390, 470................................................. ± 5%
$165.00
$165.00
560, 680, 820, 1000............................................... ±10%
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070721
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700C Series NPO Porcelain and Ceramic Multilayer Capacitors
FEATURES
•
•
•
•
•
•
•
•
•
GENERAL DESCRIPTION
Case C Size (.250" x .250")
High Q
Low ESR/ESL
High RF Power
Available with Encapsulation Options*
Capacitance Range 1 pF to 2700 pF
Ultra-Stable Performance
High RF Current/Voltage
High Reliability
PACKAGING OPTIONS
KYOCERA AVX, the industry leader, offers new improved
ESR/ESL performance for the 700C Series RF Capacitors.
This high Q multilayer capacitor is ultra-stable under high
RF current and voltage applications. High density porcelain
construction provides a rugged, hermetic package.
Tape & Reel
KYOCERA AVX offers an encapsulation option for
applications requiring extended protection against arc-over
and corona
Tray
(180 pcs)
ELECTRICAL SPECIFICATIONS
FUNCTIONAL APPLICATIONS
Quality Factor (Q)
Greater than 10,000
(1.0 pF to 1000 pF) @ 1 MHz.
Greater than 10,000
(1100 pF to 2700 pF) @ 1 KHz.
CIRCUIT APPLICATIONS
Temperature
Coefficient of
Capacitance (TCC)
0 ±30 PPM/°C (-55°C to +125°C)
• VHF/UHF RF Power Amplifiers • Plasma Chambers
• Antenna Tuning
• Medical (MRI coils)
Insulation Resistance
(IR)
1 pF to 2700 pF:
105 Megohms min. @ +25°C at rated WVDC.
104 Megohms min. @ +125°C at rated WVDC.
Max. test voltage is 500 VDC.
Working Voltage
(WVDC)
See Capacitance Values Table
Dielectric Withstanding
Voltage (DWV)
250% of WVDC for capacitors rated at 500 volts
DC or less for 5 seconds.
150% of WVDC for capacitors rated at 1250
volts DC or less for 5 seconds.
120% of WVDC for capacitors rated above 1250
volts DC for 5 seconds.
Retrace
Less than ±(0.02% or 0.02 pF),
whichever is greater
• Bypass
• Coupling
• Tuning
• Impedance Matching
• DC Blocking
*For leaded styles only
ENVIRONMENTAL CHARACTERISTICS
Thermal Shock
MIL-STD-202, Method 107, Condition A
Moisture
Resistance
MIL-STD-202, Method 106
Low Voltage
Humidity
MIL-STD-202, Method 103, Condition A, with 1.5
Volts DC applied while subjected to an environment
of 85°C with 85% relative humidity for 240 hours
min.
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
Voltage applied.
Aging Effects
None
200% of WVDC for capacitors rated at 500 volts DC or less.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC.
Piezoelectric Effects
None
Capacitance Drift
±(0.02% or 0.02 pF), whichever is greater
Termination Styles
Available in various surface mount and leaded
styles. See Mechanical Configurations
Operating
Temperature Range
From -55°C to +125°C
(No derating of working voltage)
Terminal Strength
Terminations for chips and pellets withstand a
pull of 10 lbs. min., 20 lbs. typical, for 5 seconds in
direction perpendicular to the termination surface of
the capacitor. Test per MIL-STD-202, method 211.
Life Test
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
010721
– rf microwave products –
511
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700C Series NPO Porcelain and Ceramic Multilayer Capacitors
CAPACITANCE VALUES
CAP.
CODE
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
CAP.
(pF)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
TOL.
B, C, D
RATED
WVDC
2500
CAP.
CODE
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
200
220
240
270
300
330
360
CAP.
(pF)
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
RATED
WVDC
TOL.
B, C, D
2500
F, G, J
K, M
CAP.
CODE
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
CAP.
(pF)
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
TOL.
F, G, J
K, M
RATED
WVDC
2500
CAP.
CODE
301
331
361
391
431
471
511
561
621
681
751
821
911
102
112
122
152
182
222
242
272
CAP.
(pF)
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1500
1800
2200
2400
2700
TOL.
RATED
WVDC
1500
F, G, J
K, M
1000
500
300
HOW TO ORDER
700
C
100
J
W
2500
X
T
Series
Packaging
Case Size
T = Tape and Reel, 500 pc. qty. Surface
Mount Termination Only
See mechanical dimensions below
Please see last column of mechanical configuration
table for other options.
Capacitance
Laser Marking (Optional)
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
WVDC
Termination Code
Capacitance Tolerance Code
Code
Tol.
B
C
D
±0.1 pF ±0.25 pF ±0.5 pF
F
G
J
K
M
±1%
±2%
±5%
±10%
±20%
Please see 2nd Column Mechanical
Configuration Table
The above part number refers to a 700C Series (case size C) 10 pF capacitor, J tolerance (±5%), 2500 WVDC, with W termination
(Tin/Lead, Solder Plated over Nickel Barrier), laser marking and 500 pc T&R packaging.
512
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070121
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700C Series NPO Porcelain and Ceramic Multilayer Capacitors
MECHANICAL CONFIGURATIONS
SERIES
& CASE
SIZE
TERM.
CODE
CASE SIZE
& TYPE
OUTLINES
W/T IS A
TERMINATION SURFACE
Y
C
700C
W
L
C
700C
Y
C
700C
T
MS
Y
T
L
C
TL
LL
WL
Microstrip
AR
.250 ±.015
.230+.020 -.010
(5.84+0.51-0.25) (6.35 ±0.38)
W
Solderable
Nickel Barrier
L
T
TL
LL
WL
.145 (3.68)
max. for
capacitance
values
≤ 680 pF;
.165 (4.19)
max. for
capacitance
values
> 680 pF.
.245 ±.025
(6.22 ±0.64)
L
Heavy Tin/Lead Coated,
over
Nickel Barrier
Termination
RoHS Compliant
Tin Plated over
Nickel Barrier
Termination
N/A
W
Axial Ribbon
MATERIALS
.040 (1.02)
max.
W
C
700C
T
L
OVERLAP
(Y)
Tin /Lead, Solder Plated
over Nickel Barrier
Termination
.230+.025 -.010
(5.84+0.64-0.25)
W
Pellet
700C
T
P
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
.230+.020 -.010
(5.84+0.51-0.25)
W
Solder Plate
BODY DIMENSIONS
INCHES (mm)
LENGTH
WIDTH
THICKNESS
(L)
(W)
(T)
T
Pkg Type
Pkg Code
T&R, 250
or
T250 or T
500 pcs
J36 or
Tray, 36 or
J180
180 pcs
T&R, 250
or
T250 or T
500 pcs
J36 or
Tray, 36 or
J180
180 pcs
T&R, 250
or
T250 or T
500 pcs
J36 or
Tray, 36 or
J180
180 pcs
High Purity
Tray, 24 or
Silver Leads
J24 or J60
60 pcs
LL = .500 (12.7) min.
WL = .240 ±.005
(6.10 ±.127)
TL = .004 ±.001
(.102 ±.025)
Box, 24
B24
Leads are Attached with
High Temperature Solder.
NON-MAGNETIC MECHANICAL CONFIGURATION
SERIES
& CASE
SIZE
TERM.
CODE
CASE SIZE
& TYPE
C
700C
OUTLINES
W/T IS A
TERMINATION SURFACE
Y
WN
L
C
700C
.230+.020 -.010
(5.84+0.51-0.25)
W
Solder Plate
BODY DIMENSIONS
INCHES (mm)
LENGTH
WIDTH
THICKNESS OVERLAP
(L)
(W)
(T)
(Y)
T
Y
PN
.230+.025 -.010
(5.84+0.64-0.25)
W
T
L
Pellet
C
Y
700C
TN
Solderable
Nickel
Barrier
MN
WL
W
L
C
700C
AN
Axial
Ribbon
TL
LL
Microstrip
.250 ±.015
(6.35 ±0.38)
T
L
C
700C
.230+.020 -.010
(5.84+0.51-0.25)
W
.145 (3.68)
max. for
capacitance
values
≤ 680 pF;
.165 (4.19)
max. for
capacitance
values
> 680 pF.
.040
(1.02)
max.
T
TL
LL
WL
.245 ±.025
(6.22 ±0.64)
N/A
W
L
T
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
MATERIALS
– rf microwave products –
Pkg Code
Tin/Lead, Solder Plated
over
Non-Magnetic Barrier
Termination
T&R, 250 or
500 pcs
T250 or T
Tray, 36 or J36 or J180
180 pcs
Heavy Tin/Lead Coated,
over
Non-Magnetic Barrier
Termination
T&R, 250 or
500 pcs
T250 or T
Tray, 36 or J36 or J180
180 pcs
RoHS Compliant
Tin Plated over
Non-Magnetic Barrier
Termination
T&R, 250 or
500 pcs
T250 or T
Tray, 36 or J36 or J180
180 pcs
High Purity
Silver Leads
LL = .500 (12.7) min.
WL = .240 ±.005
(6.10 ±.127)
TL = .004 ±.001
(.102 ±.025)
Leads are Attached with
High Temperature Solder.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
010721
Pkg Type
Tray, 24 or
60 pcs
J24 or J60
Tray, 24 or
60 pcs
J24 or J60
513
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700C Series NPO Porcelain and Ceramic Multilayer Capacitors
SUGGESTED MOUNTING PAD DIMENSIONS
Cap Value
< 680 pF
> 680 pF
All Values
Case C Vertical Mount
Pad Size
A Min.
B Min.
Normal
.150
.050
High Density
.130
.030
Normal
.185
.050
High Density
.165
.030
C Min.
.200
.200
.200
.200
D Min.
.300
.260
.300
.260
.200
.200
.300
.260
Horizontal Mount
.280
.050
.260
.030
Normal
High Density
PERFORMANCE DATA
ESR VS CAPACITANCE
AVX SERIES 700, CASE C
1
100000
10000
500 MHz
0.1
30 MHz
150 MHz
Q
ESR (Ohms)
Q VS CAPACITANCE
AVX SERIES 700, CASE C
1000
30 MHz
0.01
150 MHz
100
500 MHz
(Typical)
0.001
1
10
100
1000
(Typical)
10
10000
CAPACITANCE (pF)
1
10
100
CAPACITANCE (pF)
CURRENT RATING VS CAPACITANCE
AVX SERIES 700, CASE C
SERIES RESONANCE VS CAPACITANCE
AVX SERIES 700, CASE C
RMS CURRENT (Amps)
FREQUENCY (MHz)
1
0.1
0.01
(Typical)
0.001
1
10
100
1000
10000
CAPACITANCE (pF)
514
1000
CAPACITANCE (pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
010721
– rf microwave products –
10000
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700C Series NPO Porcelain and Ceramic Multilayer Capacitors
PERFORMANCE DATA
CAPACITANCE CHANGE VS TEMPERATURE
AVX SERIES 700, CASE C
% CHANGE IN CAPACITANCE
1
TC= 0 30 PPM/C
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-55
-35
-15
5
25
45
65
85
105
125
TEMPERATURE (Degrees C)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
010721
– rf microwave products –
515
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700E Series NPO Porcelain High RF Power Multilayer Capacitors
FEATURES
•
•
•
•
•
•
•
•
•
* For leaded styles only
GENERAL DESCRIPTION
PACKAGING OPTIONS
KYOCERA AVX, the industry leader, offers new improved
ESR/ESL performance for the 700 E Series RF Capacitors.
This high Q multilayer capacitor is ultra-stable under high
RF current and voltage applications with NPO performance.
High density porcelain construction provides a rugged,
hermetic package.
Tape & Reel
KYOCERA AVX offers an encapsulation option for
applications requiring extended protection against arc-over
and corona.
• Impedance Matching
• DC Blocking
CIRCUIT APPLICATIONS
• HF/RF Power Amplifiers
• Transmitters
• Antenna Tuning
• Plasma Chambers
• Medical (MRI coils)
Temperature
Coefficient (TCC)
0 ±30 PPM/°C (-55°C to +125°C)
Capacitance Range
1 pF to 2200 pF
Operating Temperature
-55°C to +125°C
(No derating of working voltage).
Quality Factor
Greater than 10,000
(1 pF to 1000 pF) @ 1 MHz.
Greater than 10,000
(1100 pF to 2200 pF) @ 1 KHz.
Insulation Resistance
(IR)
1 pF to 2200 pF
105 Megohms min. @ 25ºC at 500 VDC
104 Megohms min. @ 125ºC at 500 VDC
Working Voltage (WVDC) See Capacitance Values table
ENVIRONMENTAL CHARACTERISTICS
Thermal Shock
Mil-STD-202, Method 107, Condition A
Moisture Resistance
Mil-STD-202, Method 106
Low Voltage
Humidity
Mil-STD-202, Method 103, condition A,
with 1.5 VDC applied while subjected to
an environment of 85ºC with 85% relative
humidity for 240 hours
Life Test
MIL-STD-202, Method 108, for 2000 hours, at
125°C. Voltage applied.
120% of WVDC for capacitors rated at 1250
volts DC or less. 100% of WVDC for capacitors
rated above 1250 volts DC
Termination Styles
Available in various surface mount and leaded
styles. See Mechanical Configurations
Terminal Strength
Terminations for chips and pellets withstand
a pull of 10 lbs. min., 25 lbs. typical, for 5
seconds in direction perpendicular to the
termination surface of the capacitor. Test per
MIL-STD-202, method 211.
516
Tray
(96 pcs)
ELECTRICAL SPECIFICATIONS
FUNCTIONAL APPLICATIONS
• Bypass
• Coupling
• Tuning
Case E Size (.380” x .380”)
Capacitance Range 1pF to 2200pF
Extended WVDC up to 7200 VDC
Low ESR/ESL
High Q
High RF Power
Ultra-Stable Performance
High RF Current/Voltage
Available with Encapsulation Option*
Dielectric Withstanding
Voltage (DWV)
150% of WVDC for capacitors rated at
1250 volts DC or less for 5 seconds. 120%
of WVDC for capacitors rated above 1250
Volts DC for 5 seconds
Aging Effects
None
Piezoelectric Effects
None
Capacitance Drift
± (0.02% or 0.02 pF), whichever is greater
Retrace
Less than ±(0.02% or 0.02 pF),
whichever is greater.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070121
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700E Series NPO Porcelain High RF Power Multilayer Capacitors
CAPACITANCE VALUES
Rated WVDC
EXT.
VOTAGE
STD.
F, G,
J, K,
M
EXTENDED
7200
3600
EXT.
F, G,
J, K,
M
Tol.
5000
VOLT.
B, C,
D
Rated
Cap. Cap.
WVDC
Code (pF)
STD. EXT.
390
39
430
43
470
47
510
51
560
56
620
62
680
68
750
75
820
82
910
91
3600
101 100
7200
111 110
121 120
131 130
151 150
161 160
181 180
201 200
221 220
241 240
EXTENDED VOLTAGE
EXTENDED VOLTAGE
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
EXTENDED VOLTAGE
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
Tol.
EXTENDED VOLTAGE
Rated
Cap. Cap.
WVDC
Code (pF)
STD. EXT.
5R1
5.1
5R6
5.6
6R2
6.2
6R8
6.8
7R5
7.5
8R2
8.2
9R1
9.1
100
10
110
11
120
12
B, C,
3600
130
13
D
7200
150
15
160
16
180
18
200
20
220
22
240
24
270
27
300
30
330
33
360
36
Cap. Cap.
Tol.
Code (pF)
N/A
CAP.
CODE
CAP.
(pF)
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
112
122
152
182
222
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1500
1800
2200
TOL.
RATED WVDC
STD.
EXT.
3600
2500
F, G,
J, K,
M
N/A
1000
VRMS = 0.707 X WVDC
• SPECIAL VALUES, TOLERANCES, MATCHING, AND CAPACITOR ASSEMBLIES ARE AVAILABLE. • KYOCERA AVX’S CUSTOM POWER CAPACITOR ASSEMBLY CATALOG, LISTS
ASSEMBLY
OPTIONS. • DIFFERENT WORKING VOLTAGES ARE AVAILABLE • ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY.
HOW TO ORDER
700
E
391
K
W
3600
X**
T
Series
Packaging
Case Size
T = Tape and Reel, 250 pc qty. Please see
last Column Mechanical Configuration
Table for Box and Tray Options
See mechanical dimensions below
Capacitance
Laser Marking (Optional)
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
Voltage Rating
Termination Style Code
Capacitance Tolerance Code
Code
Tol.
B
C
D
F
G
J
K
M
±.1 pF
±.25 pF
±.5 pF
±1%
±2%
±5%
±10%
±20%
Please see 2nd Column Mechanical
Configuration Table
**Optional
The above part number refers to a 700 E Series (case size E) 390 pF capacitor, K tolerance (±10%), 3600 WVDC, with W
termination (Tin /Lead, Solder Plated over Nickel Barrier), laser marking and Tape and Reel Packaging.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
072022
– rf microwave products –
517
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700E Series NPO Porcelain High RF Power Multilayer Capacitors
MECHANICAL CONFIGURATION
Series
& Case
Size
Term.
Code
E
700E
Outline
W/T is a Termination
Surface
Case Size
& Type
Y
W
E
700E
T
Solderable
Nickel Barrier
MS
AR
.040 (1.02)
max.
.380 ±.010 170 (4.32)
(9.65 ±0.25)
max.
W
LT
TL
LL
WL
W
LT
.380+.035-.010
(9.65+0.89-0.25)
LL
E
AW
W
Axial Wire
•
LL
RW
Pkg Type
Pkg
Code
Tin/Lead, Solder Plated over
Nickel Barrier Termination
T&R, 250 pcs
Tray, 24 or
96 pcs
T
J24
J96
Heavy Tin/Lead Coated,
over Nickel Barrier
Termination
T&R, 250 pcs
Tray, 24 or
96 pcs
T
J24
J96
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
T&R, 250 pcs
Tray, 24 or
96 pcs
T
J24
J96
High Purity
Silver Leads
LL = .750 (19.05) min
WL = .350 ±.010 (8.89 ±0.25)
TL = .010 ±.005 (0.25 ±0.13)
Leads are Attached with
High Temperature Solder.
Tray, 16 or
32 pcs
J16
J32
Tray, 16 or
32 pcs
J16
J32
Silver-plated Copper Leads
ia. = .032 ±.002 (.813 ±.051)
D
LL = 2.25 (57.2) min.
Box, 20 pcs
B20
Silver-plated Copper Leads
ia. = .032 ±.002 (.813 ±.051)
D
LL = 1.0 (25.4) min.
Tray, 16 or
64 pcs
J16
J64
N/A
LT
E
W
Radial Wire
Lead and Termination
Dimensions and Material
Overlap
Materials
(Y)
TL
WL
Axial Ribbon
700E
.380+.015 -.010
(9.65+0.38-0.25)
LL
E
700E
W
LT
Microstrip
700E
.380+.040 -.010
(9.65+1.02-0.25)
Y
E
700E
W
LT
Pellet
700E
.380+.015 -.010
(9.65+0.38-0.25)
Y
P
E
W
LT
Solder Plate
Body Dimensions
inches (mm)
Length
Width
Thickness
(L)
(W)
(T)
LT
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
518
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062122
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700E Series NPO Porcelain High RF Power Multilayer Capacitors
MECHANICAL CONFIGURATION
Series
& Case
Size
Term.
Code
700E
WN
Case Size
& Type
E
PN
TN
W
Non-Mag
Solderable
Barrier
T
L
Y
W
Non-Mag
Pellet
E
700E
Y
Non-Mag
Solder Plate
E
700E
Outline
W/T is a Termination
Surface
T
L
Y
W
L
T
Body Dimensions
inches (mm)
Length
Width
Thickness
(L)
(W)
(T)
Lead and Termination
Dimensions and Material
Overlap
Materials
(Y)
.380+.015 -.010
(9.65+0.38-0.25)
.040 (1.02)
max.
.380+.040 -.010
(9.65+1.02-0.25)
.380+.015 -.010
(9.65+0.38-0.25)
E
700E
MN
700E
AN
.380 ±.010
(9.65 ±0.25)
Non-Mag
Microstrip
E
700E
BN
700E
RN
.380+.035 -.010
(9.65+0.89-0.25)
Pkg
Code
Tin/Lead, Solder Plated over
Non-Magnetic
Barrier Termination
T&R, 250 pcs
Tray, 24 or 96
pcs
T
J24
J96
Heavy Tin/Lead Coated, over
Non-Magnetic
Barrier Termination
T&R, 250 pcs
Tray, 24 or 96
pcs
T
J24
J96
RoHS Compliant
Tin Plated over
Non-Magnetic
Barrier Termination
T&R, 250 pcs
Tray, 24 or 96
pcs
T
J24
J96
Tray, 16 or
32 pcs
J16
J32
Tray, 16 or
32 pcs
J16
J32
Silver-plated Copper Leads
ia. = .032 ±.002 (.813 ±.051)
D
LL = 2.25 (57.2) min.
Box, 20 pcs
B20
Silver-plated Copper Leads
ia. = .032 ±.002 (.813 ±.051)
D
LL = 1.0 (25.4) min.
Tray, 16 or
64 pcs
J16
J64
High Purity
Silver Leads
LL = .750 (19.05) min
WL = .350 ±.010 (8.89 ±0.25)
TL = .010 ±.005 (0.25 ±0.13)
Leads are Attached with
High Temperature Solder.
.170 (4.32)
max.
E
Non-Mag
Axial Ribbon
Pkg Type
N/A
Non-Mag
Axial Wire
E
Non-Mag
Radial Wire
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062122
– rf microwave products –
519
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700E Series NPO Porcelain High RF Power Multilayer Capacitors
SUGGESTED MOUNTING PAD DIMENSIONS
W
L
T
L
W
39
391k
1k
T
Mount Type
Horizontal
Electrode Orientation
Vertical
Electrode Orientation
B
B
Pad Size
Normal
Vertical Mount
High Density
Normal
Horizontal Mount
High Density
A Min.
.185
.165
.405
.383
Case E
B Min.
.050
.030
.050
.030
C Min.
.325
.325
.325
.325
D Min.
.425
.385
.425
.385
Dimensions are in inches.
A
C
D
PERFORMANCE DATA
ESR VS. CAPACITANCE
SERIES 700, CASE E
0.001
Q VS. CAPACITANCE
SERIES 700, CASE E
100000
30 MHz
0.1
Q
ESR (Ohms)
10000
30 MHz
1000
(Typical)
0.001
(Typical)
1
10
100
CAPACITANCE (pF)
(1.0 pF to 400 pF)
100
1000
ESR VS. CAPACITANCE
SERIES 700, CASE E
1
1000
0.1
10
100
1000
CAPACITANCE (pF)
(1.0 pF to 400 pF)
ESR VS. CAPACITANCE
SERIES 700, CASE E
ESR (Ohms)
30 MHz
Q
0.01
30 MHz
100
(Typical)
(Typical)
0.001
1
1000
10
100
10000
CAPACITANCE (pF)
(430 pF to 2200 pF)
520
1000
CAPACITANCE (pF)
(430 pF to 2200 pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
10000
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
700E Series NPO Porcelain High RF Power Multilayer Capacitors
PERFORMANCE DATA
ESR (Ohms)
10000
% CHANGE IN CAPACITANCE
SERIES RESONANCE VS. CAPACITANCE
SERIES 700, CASE E
1000
100
(Typical)
10
10
100
CAPACITANCE (pF)
RMS CURRENT (Amps)
10
1
2 MHz
10 MHz
30 MHz
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
1
10
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-55
100
-35
-15
5
45
65
85
105
125
The current rating is based on the 65°C mounting
surface with a device thermal resistance (θ) of
12° C/W. A power dissipation of 5W will result
in a case temperature of 125°C.
10 MHz
10
30 MHz
2 MHz
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
1
100
1000
25
TEMPERATURE (°C)
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE E
CAPACITANCE (pF)
(1.0 pF to 400 pF)
1000
10000
CAPACITANCE (pF)
(430 pF to 2200 pF)
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE E, EXTENDED VOLTAGE
100
RMS CURRENT (Amps)
0.1
0.4
100
The current rating is based on an 65°C mounting
surface with a device thermal resistance (θ) of
12°C/W. A power dissipation of 5 W will result in
a case temperature of 125°C.
TCC = 0 30 PPM/C
0.6
10000
1000
CURRENT RATING VS. CAPACITANCE
SERIES 700, CASE E
100
RMS CURRENT (Amps)
1
1
0.8
CAPACITANCE CHANGE VS. TEMPERATURE
SERIES 700, CASE E
The current rating is based on an 65°C mounting
surface with a device thermal resistance (θ) of
12°C/W. A power dissipation of 5 W will result in
a case temperature of 125°C.
10
30 MHz
10 MHz
1
0.1
2 MHz
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
1
10
100
1000
CAPACITANCE (pF)
(1.0 pF to 180 pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
521
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800A Series NP0 Porcelain, High RF Power Ultra-Low ESR
FEATURES
•
•
•
•
•
•
•
•
•
Case A Size (.055” x .055”)
Low ESR / ESL
High Q
Low Noise
Capacitance Range 0.1pF to 100pF
Rated WVDC up to 250 VDC
Zero TCC
High Self-Resonance
Established Reliability (QPL)
GENERAL DESCRIPTION
KYOCERA AVX 800 A Series offers superb performance in
demanding high RF power applications requiring consistent
and reliable operation. The combination of highly conductive
metal electrode systems, optimized case geometries, and
proprietary dielectrics, yields the lowest ESR. KYOCERA AVX
new NPO low loss rugged dielectrics are designed to provide
superior heat transfer in high RF power applications. Ultralow ESR and superior thermal performance insure that the
800 A Series products are your best choice for high RF power
applications from UHF through microwave frequencies.
Typical applications: UHF and Microwave Communications
Systems, Wireless Communications, Public Safety Radio,
Telecom, WiMAX, and Satellite Systems.
Typical circuit applications: High RF Power Filter Networks,
Combiners, Couplers, Matching Networks, Output Coupling,
Antenna Coupling, and DC Blocking and Bypassing.
ELECTRICAL SPECIFICATIONS
Temperature Coefficient
(TCC)
0 ± 30 PPM/ºC
Capacitance Range
0.1pF to 100pF
Operating Temperature
-55ºC to +125ºC*
Quality Factor
Greater than 2,000 @ 1 MHz.
Insulation Resistance
(IR)
0.1 pF to 470 pF
105 Megohms min. @ 25ºC at
rated WVDC
105 Megohms min. @
125ºC at rated WVDC
Working Voltage (WVDC)
See Capacitance Values table
Dielectric Withstanding
Voltage (DWV)
250% of rated WVDC for 5 seconds
Aging Effects
None
Piezoelectric Effects
None
Capacitance Drift
± (0.02% or 0.02 pF), whichever
is greater
522
PACKAGING OPTIONS
Tape & Reel
Vertical
Orientation
Tape & Reel
ENVIRONMENTAL CHARACTERISTICS
Themal Shock
Mil-STD-202, Method 107, Condition A
Moisture
Resistance
Mil-STD-202, Method 106
Low Voltage
Humidity
Mil-STD-202, Method 103, condition A,
with 1.5 VDC applied while subjected to
an environment of 85ºC with 85% relative
humidity for 240 hours
Life Test
MIL-STD-202, Method 108, for 2000 hours, at
125°C. 200% WVDC applied.
Solderability
Mil-STD-202, Method 208
Terminal
Strength
Terminations for chips and pellets withstand
a pull of 5 lbs. min., 10 lbs. typical, for 5
seconds in direction perpendicular to the
termination surface of the capacitor.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
050222
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800A Series NP0 Porcelain, High RF Power Ultra-Low ESR
CAPACITANCE VALUES
Cap.
Code
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
Cap.
(pF)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
Tol.
Rated WVDC
B
B, C
250
B, C,
D
Cap.
Code
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
Cap.
(pF)
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
HOW TO ORDER
Tol.
Rated WVDC
B, C,
D
250
B, C,
J, K,
M
F, G,
J, K,
M
800
A
100
J
Cap.
Code
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
Cap.
(pF)
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
T
250
Series
Rated WVDC
F, G,
J, K,
M
250
X
T
Packaging
T = Tape and Reel, 500 pc qty
TV = Vertical Orientation of Product Tape
and Reel, 500 pc qty
Case Size
See mechanical dimensions below
For tray and box options, leave last position blank.
Please see last column mechanical configuration table for
package quantities
Capacitance
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
Laser Marking (Optional)
Voltage Rating
Capacitance Tolerance Code
Code
Tol.
Tol.
B
C
D
±.1 pF ±.25 pF ±.5 pF
F
G
J
K
M
±1%
±2%
±5%
±10%
±20%
The above part number refers to a 800A Series (case size A) 10 pF capacitor, J tolerance (±5%), 250 WVDC, with T termination
(Tin Plated over Nickel Barrier Termination), Laser Marking and Tape and Reel 4000 pc qty. Packaging
Termination Style Code
Please see 2nd Column Mechanical
Configuration Table
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070621
– rf microwave products –
523
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800A Series NP0 Porcelain, High RF Power Ultra-Low ESR
MECHANICAL CONFIGURATION
Series &
Case Size
Term.
Code
Case Size
& Type
800A
T
A
Solderable
Nickel
Barrier
Y
W
T
L
Y
800A
W
Body Dimensions
inches (mm)
Outline ES W/T
is a Termination
Surface
A
Solder Plate
W
T
L
Length (L)
Width (W)
.055+.015 -.010
(1.40+0.38-0.25)
.055 ±.015
(1.40 ±0.38)
.055+.015 -.010
(1.40+0.38-0.25)
.055 ±.015
(1.40 ±0.38)
Lead and Termination
Dimensions and Material
Thickness
(T)
.057
(1.45)
max.
Overlap (Y)
.010+.010 -.005
(0.25+0.25 -0.13)
Materials
Pkg Type & Qty
Pkg Code
RoHS Compliant
Tin Plated over
Nickel Barrier
Termination
T&R, 4000 or
500 pcs
T4K or T
Vertical T&R,
TV4K or TV
4000 or 500 pcs
Tin/ Lead, Solder
Plated over Nickel
Barrier Termination
T&R, 4000 or
500 pcs
T4K or T
Vertical T&R,
TV4K or TV
4000 or 500 pcs
NON-MAGNETIC CONFIGURATION
Series &
Case Size
800A
524
Term. Case Size
Code
& Type
TN
A
Non-Mag
Solderable
Barrier
Non-Magnetic
Configuration
Y
W
L
T
Body Dimensions
inches (mm)
Lead and Termination
Dimensions and Material
Length (L)
Width (W)
Thickness
(T)
.055+.025 -.010
(1.40+0.64-0.25)
.055 ±.015
(1.40 ±0.38)
.057 (1.45) .010+.010 -.005
max.
(0.25+0.25 -0.13)
Overlap (Y)
Materials
070621
Pkg Code
RoHS Compliant
T&R, 4000 or
Tin Plated over
500 pcs
T4K or T
Non-Magnetic
Vertical T&R,
TV4K or TV
Barrier Termination 4000 or 500 pcs
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
Pkg Type & Qty
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800A Series NP0 Porcelain, High RF Power Ultra-Low ESR
SUGGESTED MOUNTING PAD DIMENSIONS
Mount Type
Pad Size
Normal
Vertical Mount
High Density
Normal
Horizontal Mount
High Density
Case A
A Min.
.070
.050
.080
.060
B Min.
.050
.030
.050
.030
C Min.
.030
.030
.030
.030
D Min.
.130
.090
.130
.090
Dimensions are in inches.
ESR (Ohms)
1.00
800 A ESR vs. Frequency
800A - 1.0 pF
800A - 3.3 pF
800A - 10 pF
800A - 33 pF
800A - 100 pF
0.10
0.01
100
1000
10000
Frequency (MHz)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
113020
– rf microwave products –
525
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800A Series NP0 Porcelain, High RF Power Ultra-Low ESR
PERFORMANCE DATA
800 A FSR & FPR vs. Capacitance
100
Vert Fpr
Horiz Fpr
Vert Fsr
Frequency (GHz)
Horiz Fsr
10
(Typical)
1
11
0
Capacitance (pF)
800A Capacitance Change vs. Temperature
1
0.8
TCC= 0 ±30 PPM/C
% Change in Capacitance
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
Temperature (Degrees C)
526
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
113020
– rf microwave products –
100
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800A Series NP0 Porcelain, High RF Power Ultra-Low ESR
SAMPLE KITS
Kit #
Kit 80T
Kit 81T
Kit 82T
RoHS
Compliant
Item Number
Description
Cap. Value
Range (pF)
800A NPO Ceramic
High RF Power MLCs
16 different values,
15 pcs. min. per value
0.1 to 2.0
DK0081T
800A NPO Ceramic
High RF Power MLCs
16 different values,
15 pcs. min. per value
1.0 to 10
DK0082T
800A NPO Ceramic
High RF Power MLCs
16 different values,
15 pcs. min. per value
10 to 100
DK0080T
Cap Value (pF)
Tol.
0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9,
1.0, 1.1, 1.2, 1.5 ±0.1............................................. ±0.1
Price
$135.00
1.6, 1.8, 2.0............................................................ ±0.25
1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3............ ±0.1
3.9, 4.7, 5.6, 6.8, 8.2.............................................. ±0.25
$135.00
10........................................................................... ±5
10, 12, 15, 18, 20, 22, 24, 27, 30,
33, 39, 47, 56, 68, 82, 100..................................... ±5%
$135.00
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
113020
– rf microwave products –
527
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800B Series NP0 Porcelain, High RF Power Ultra-Low ESR
FEATURES
•
•
•
•
•
•
•
Case B Size (.110” x .110”)
Rugged, reliable NPO dielectric
Case optimized for highest self resonant frequency
Capacitance Range 0.1 pF to 1000 pF
Lowest ESR
Capable of highest RF Power
RoHS Compliant/Lead-Free
PACKAGING OPTIONS
GENERAL DESCRIPTION
KYOCERA AVX’s 800B Series offers superb performance in
demanding high RF power applications requiring consistent
and reliable operation. The combination of highly conductive
metal electrode systems, optimized case geometries, and
proprietary dielectrics, yields the lowest ESR. KYOCERA AVX’s
new NPO low loss rugged dielectrics are designed to provide
superior heat transfer in high RF power applications. Ultralow ESR and superior thermal performance insure that the
800B Series products are your best choice for high RF power
applications from VHF through microwave frequencies.
TYPICAL APPLICATIONS
• Avionics
• Public Safety Radio
• Wireless
Communications
• VHF / UHF / HDTV
Broadcast Transmitters
• Telecom
• WiMAX
• Microwave Communication
Systems and Satellite Systems
TYPICAL CIRCUIT APPLICATIONS
•
•
•
•
High RF Power Filter Networks
Matching Networks
Couplers
Combiners
•
•
•
•
Output Coupling
Antenna Coupling
DC Blocking
Bypassing
ENVIRONMENTAL TEST
Thermal Shock
MIL-STD-202, Method 107, Condition A
Moisture Resistance
MIL-STD-202, Method 106
MIL-STD-202, Method 103, Condition A,
with 1.5 Volts DC applied while subjected
Low Voltage Humidity
to an environment of 85°C with 85%
relative humidity for 240 hours min.
Life Test
528
MIL-STD-202, Method 108, for 2000
hours, at 125°C
200% WVDC applied
Tape & Reel
Vertical
Orientation
Tape & Reel
ENVIRONMENTAL CHARACTERISTICS
Quality Factor (Q)
> 2000 @ 1 MHz
Temperature Coefficient
of Capacitance (TCC)
0 ±30 PPM/°C (-55°C to +125°C)
Insulation Resistance
(IR)
0.1 pF to 1000 pF:
105 Megohms min. @
+25°C at rated WVDC
104 Megohms min. @
+125°C at rated WVDC
Working Voltage (WVDC)
See Capacitance Values Table
Dielectric Withstanding
Voltage (DWV)
Case B: 250% of rated
WVDC for 5 secs
Retrace
Less than ±(0.02% or 0.02 pF),
whichever is greater
Aging Effects
None
Piezoelectric Effects
None
Capacitance Drift
±(0.02% or 0.02 pF),
whichever is greater
Operating
Temperature Range
From -55°C to +125°C
(No derating of working voltage)
Termination Styles
See Mechanical Configurations
Terminal Strength
Terminations for chips withstand a
pull of 5 lbs. min., 15 lbs. typical, for
5 seconds in direction perpendicular
to the termination surface of the
capacitor. Test per MIL-STD-202,
method 211.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
113020
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800B Series NP0 Porcelain, High RF Power Ultra-Low ESR
CAPACITANCE VALUES
Cap.
Code
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
Cap.
(pF)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
Tol.
Rated
WVDC
B
B, C
500
B, C,
D
Cap.
Code
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
Cap.
(pF)
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
Tol.
Rated
WVDC
Cap.
Code
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
B, C,
D
500
B, C,
J, K,
M
F, G,
J, K,
M
Cap.
(pF)
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
Tol.
Rated
WVDC
500
F, G,
J, K,
M
300
Cap.
Code
151
161
181
201
221
241
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
Cap.
(pF)
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
Tol.
Rated
WVDC
300
200
F, G,
J, K,
M
100
50
VRMS = 0.707 X WVDC
• SPECIAL VALUES, TOLERANCES AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY.
HOW TO ORDER
800
B
910
J
T
500
X
T
Series
Packaging
Case Size
T = Tape and Reel, 500 pc qty
TV = Vertical Tape and Reel, 500 pc qty
See mechanical dimensions below
Please see last Column Mechanical Configuration Table for
other options
Capacitance
Laser Marking (Optional)
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
WVDC
Termination Code
Capacitance Tolerance Code
Code
Tol.
B
C
D
±0.1 pF ±0.25 pF ±0.5 pF
F
G
J
K
M
±1%
±2%
±5%
±10%
±20%
Please see 2nd Column Mechanical
Configuration Table
The above part number refers to a 800 B Series (case size B) 91 pF capacitor, J tolerance (±5%), 500 WVDC, with T termination
(Tin Plated over Nickel Barrier Termination, RoHS Compliant), laser marking and tape and reel packaging.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070621
– rf microwave products –
529
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800B Series NP0 Porcelain, High RF Power Ultra-Low ESR
MECHANICAL CONFIGURATION
Series & Case
Size
Term.
Code
Case Size
& Type
B
800B
T
800B
Y
Solderable
Nickel
Barrier
B
Body Dimensions
inches (mm)
Length (L)
Width (W)
Thickness (T)
Outline ES W/T
is a Termination
Surface
W
T
L
Y
W
W
Solder Plate
T
L
.110+.020 -.010
(2.79+0.51-0.25)
.110+.020 -.010
(2.79+0.51-0.25)
.110 ±.015
(2.79 ±0.38)
.070
(1.78)
max.
Lead and Termination
Dimensions and Material
Overlap (Y)
Materials
Pkg Type
& Qty
Pkg Code
RoHS Compliant
Tin Plated over
Nickel Barrier
Termination
T&R, 1000 or
500 pcs
Vertical T&R,
1000 or
500 pcs
T1K or T
TV1K or
TV
Tin/ Lead, Solder
Plated over Nickel
Barrier Termination
T&R, 1000 or
500 pcs
Vertical T&R,
1000 or
500 pcs
T1K or T
TV1K or
TV
Pkg Type
& Qty
Pkg Code
T&R, 1000 or
500 pcs
Vertical T&R,
1000 or
500 pcs
T1K or T
TV1K or
TV
.015 (0.38)
±.010 (0.25)
.110 ±.015
(2.79 ±0.38)
NON-MAGNETIC CONFIGURATION
Series & Case
Size
Term.
Code
Case Size
& Type
B
800B
TN
Non-Mag
Solderable
Barrier
Non-Magnetic
Configuration
Y
W
L
T
Body Dimensions
inches (mm)
Length (L)
Width (W)
Thickness (T)
.110+.020 -.010
(2.79+0.51-0.25)
.110 ±.015
(2.79 ±0.38)
.070
(1.78)
max.
Lead and Termination
Dimensions and Material
Overlap (Y)
Materials
.015 (0.38)
±.010 (0.25)
RoHS Compliant
Tin Plated over
Non-Magnetic
Barrier Termination
SUGGESTED MOUNTING PAD DIMENSIONS
Case B Vertical Mount
Cap Value .43
Pad Size
A Min.
B Min.
C Min.
D Min.
Normal
.090
(2.29)
.050
(1.27)
.075
(1.91)
.175
(4.45)
High Density
.070
(1.78)
.030
(.762)
.075
(1.91)
.135
(3.43)
All Values
inches (mm)
Case B Horizontal Mount
Cap Value .43
Pad Size
A Min.
B Min.
C Min.
D Min.
Normal
.130
(3.30)
.050
(1.27)
.050
(1.27)
.175
(4.45)
High Density
.110
(2.79)
.030
(.762)
.075
(1.91)
.135
(3.43)
All Values
inches (mm)
530
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
113020
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800B Series NP0 Porcelain, High RF Power Ultra-Low ESR
PERFORMANCE DATA
1.00
800 B ESR vs. Frequency
Frequency (GHz)
3.3 pF
10 pF
39 pF
100 pF
200 pF
1000 pF
Fsr
1.0
(Typical)
0.01
100
1000
0.1
10000
Frequency (MHz)
1
10
100
1000
Capacitance (pF)
800B Capacitance Change vs. Temperature
1
0.8
TCC= 0 ±30 PPM/C
0.6
0.4
% Change in Capacitance
ESR (Ohms)
Fpr
10.0
1.0 pF
0.10
800 B FSR & FPR vs. Capacitance
100.0
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-55
-35
-15
5
25
45
65
85
105
125
Temperature (Degrees C)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
113020
– rf microwave products –
531
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800B Series NP0 Porcelain, High RF Power Ultra-Low ESR
SAMPLE KITS
Kit #
Kit 83T
RoHS
Compliant
Item Number
DK0083T
Kit 84T
DK0084T
Kit 85T
DK0085T
532
Description
800B NPO Ceramic
High RF Power MLCs
16 different values,
15 pcs. min. per value
800B NPO Ceramic
High RF Power MLCs
16 different values,
15 pcs. min. per value
800B NPO Ceramic
High RF Power MLCs
16 different values,
15 pcs. min. per value
Cap. Value
Range (pF)
Cap Value (pF)
Tol.
Price
1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3............ ±0.1
1.0 to 10
3.9, 4.7, 5.6, 6.8, 8.2.............................................. ±0.25
$165.00
10........................................................................... ±5%
10 to 100
100 to 1000
10, 12, 15, 18, 20, 22, 24, 27, 30,
33, 39, 47, 56, 68, 82, 100..................................... ±0.1
100, 120, 150, 180, 200, 220, 240, 270,
300, 330, 390, 470................................................. ±5%
$165.00
$165.00
560, 680, 820, 1000............................................... ±10%
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070721
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800C Series NP0 Porcelain, High RF Power Ultra-Low ESR
FEATURES
•
•
•
•
•
•
Case C Size (.250” x .250”)
High Q
Low ESR/ESL
High RF Power
3600 WVDC
Capacitance Range:
2.2 pF to 3000 pF
•
•
•
•
Ultra-Stable Performance
High RF Current/Voltage
High Reliability
RoHS Compliant, Pb free
PACKAGING OPTIONS
GENERAL DESCRIPTION
KYOCERA AVX’s 800 C Series offers superb performance in
demanding high RF power applications requiring consistent
and reliable operation. The combination of highly conductive
metal electrode systems, optimized case geometries, and
proprietary dielectrics, yields the lowest ESR. KYOCERA AVX’s
new NPO low loss rugged dielectrics are designed to provide
superior heat transfer in high RF power applications. Ultralow ESR and superior thermal performance ensure that the
800C Series products are your best choice for high RF power
applications from VHF through microwave frequencies.
TYPICAL APPLICATIONS
• Bypass
• Coupling
• Tuning
• DC Blocking
• Impedance Matching
TYPICAL CIRCUIT APPLICATIONS
• HF/RF Power Amplifiers
• Transmitters
• Antenna Tuning
• Plasma Chambers
• Medical (MRI coils)
ENVIRONMENTAL TEST
Tape & Reel
Tray
(180 pcs)
ENVIRONMENTAL CHARACTERISTICS
Quality Factor (Q)
Greater than 5,000 (2.2 pF to 1000 pF) @ 1 MHz.
Greater than 5,000 (1100 pF to 3000 pF) @ 1 KHz.
Temperature
Coefficient of
Capacitance (TCC)
0 ±30 PPM/°C (-55°C to +125°C)
Insulation
Resistance (IR)
2.2 pF to 3000 pF:
105 Megohms min. @ +25°C at rated WVDC.
104 Megohms min. @ +125°C at rated WVDC.
Max. test voltage is 500 VDC.
Working Voltage
(WVDC)
See Capacitance Values Table
Dielectric
Withstanding
Voltage (DWV)
250% of WVDC for capacitors rated at 500 volts
DC or less for 5 seconds.
150% of WVDC for capacitors rated above 500
volts DC and ≤1250 volts DC for 5 seconds.
120% of WVDC for capacitors rated above 1250
volts DC for 5 seconds.
Retrace
Less than ±(0.02% or 0.02 pF),
whichever is greater.
Aging Effects
None
Piezoelectric Effects
None
Capacitance Drift
±(0.02% or 0.02 pF), whichever is greater.
Operating
Temperature Range
From -55°C to +125°C
(No derating of working voltage).
Termination Styles
See Mechanical Configurations
Terminal Strength
Terminations for chips withstand a pull of 10 lbs.
min., 20 lbs. typical, for 5 seconds in direction
perpendicular to the termination surface of the
capacitor. Test per MIL-STD-202, method 211.
Thermal Shock MIL-STD-202, Method 107, Condition A.
Moisture
Resistance
MIL-STD-202, Method 106.
Low Voltage
Humidity
MIL-STD-202, Method 103, Condition A, with 1.5 Volts
DC applied while subjected to an environment of 85°C
with 85% relative humidity for 240 hours min.
Life Test
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
Voltage applied.
200% of WVDC for capacitors rated at 500 volts DC or less.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062821
– rf microwave products –
533
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800C Series NP0 Porcelain, High RF Power Ultra-Low ESR
CAPACITANCE VALUES
CAP
CODE
CAP
(pF)
2R2
RATED
WVDC
CAP
CODE
CAP
(pF)
CAP
CODE
CAP
(pF)
2.2
240
24
241
240
2R4
2.4
270
27
271
270
2R7
3R0
2.7
300
30
301
300
3.0
330
33
331
330
3R3
3.3
360
36
361
360
3R6
3.6
390
39
391
390
3R9
3.9
430
43
431
430
4R3
4.3
470
47
471
470
4R7
4.7
510
51
511
510
5R1
5.1
560
56
561
560
5R6
5.6
620
62
621
620
6R2
6.2
680
68
681
680
6R8
6.8
750
75
751
750
7R5
7.5
820
82
821
820
8R2
8.2
910
91
911
910
9R1
9.1
101
100
102
1000
100
10
111
110
112
1100
TOL.
B, C, D
3600
110
11
121
120
120
12
131
130
130
13
150
15
160
16
F, G, J. K
TOL.
RATED
WVDC
3600
F, G, J, K
2500
122
1200
152
1500
151
150
182
1800
161
160
222
2200
181
180
242
2400
180
18
201
200
272
2700
200
20
221
220
302
3000
220
22
TOL.
RATED
WVDC
1000
F, G, J, K
600
500
HOW TO ORDER
800
C
220
J
TN
3600
X
T
Series
Packaging
Case Size
T = Tape and Reel, 500 pc. qty.
Surface Mount Termination Only
See mechanical dimensions below
Please see last Column Mechanical Configuration Table for
other options
Capacitance
Laser Marking (Optional)
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
WVDC
Termination Code
Capacitance Tolerance Code
Code
Tol.
B
C
D
±0.1 pF ±0.25 pF ±0.5 pF
F
G
J
K
±1%
±2%
±5%
±10%
Please see 2nd Column Mechanical
Configuration Table
The above part number refers to a 800 C Series (case size C) 22 pF capacitor, J tolerance (±5%),3600 WVDC, with TN termination
(RoHS Compliant, Tin Plated over Non-Magnetic Barrier Termination), laser marking and T&R packaging.
534
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062821
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800C Series NP0 Porcelain, High RF Power Ultra-Low ESR
MECHANICAL CONFIGURATIONS
Series
& Case
Size
Term.
Code
C
800C
Outlines
W/T Is A
Termination Surface
Case Size
& Type
Y
T
L
T
C
800C
MS
TL
LL
WL
250 ±.015
(6.35 ±0.38)
W
Microstrip
L
T
C
800C
WL
Thickness Overlap
(T)
(Y)
245 ±.025
(6.22 ±0.64)
.200
(5.08)
max.
.040
(1.02)
max.
W
L
Axial Ribbon
Materials
Pkg Type
Pkg Code
RoHS Compliant
Tin Plated over
Nickel Barrier
Termination
T&R, 250
or
500 pcs
Tray, 36 or
180 pcs
T250 or T
J36 or
J180
High Purity Silver Leads
LL = .500 (12.7) min.
WL = .240 ±.005 (6.10
±.127)
Tray, 24 or
TL = .004 ±.001 (.102
60 pcs
±.025)
Leads are Attached with
High Temperature
Solder
J24 or J60
Silver Leads
LL = .500 (12.7) min.
WL = ** See below
TL = .004 ±.001 (.102
±.025)
TL
LL
AR
Lead And Termination
Dimensions And Materials
230+.025 -.010
(5.84+0.64-0.25)
W
Solderable Barrier
Body Dimensions
Inches (mm)
Length
Width
(L)
(W)
T
Box, 24
pcs
B24
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
** WL = .110 (2.79) for capacitance values ≤ 680 pF; WL = .130 (3.30) for capacitance values > 680 pF
NON-MAGNETIC MECHANICAL CONFIGURATIONS
Series
& Case
SIZE
Term.
Code
Outlines
W/T is a
Termination Surface
Case Size
& Type
Y
800C
TN
L
T
C
800C
WL
Non-Mag
Microstrip245
L
T
WL
Non-Mag
Axial Ribbon
245 ±.025
(6.22 ±0.64)
W
L
50 ±.015
(6.35 ±0.38)
TL
LL
AN
±.025
(6.22 ±0.64)
W
C
800C
Thickness Overlap
(T)
(Y)
TL
LL
MN
Lead and Termination
Dimensions and Materials
230+.025-.010
(5.84+0.64-0.25)
W
C
Non-Mag
Solderable Barrier.
Body Dimensions
Inches (mm)
Length
Width
(L)
(W)
T
.200
(5.08)
max.
.040
(1.02)
max.
Materials
Pkg Type
Pkg Code
RoHS Compliant
Tin Plated over
Non-Magnetic Barrier
Termination
T&R, 250
or
500 pcs
Tray, 36 or
180 pcs
T250 or T
J36 or
J180
High Purity Silver Leads
LL = .500 (12.7) min.
WL = .240 ±.005 (6.10
±.127)
Tray, 24 or
TL = .004 ±.001 (.102
60 pcs
±.025)
Leads are Attached with
High Temperature
Solder
J24 or J60
Silver Leads
LL = .500 (12.7) min.
WL = ** See below
TL = .004 ±.001 (.102
±.025)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062821
– rf microwave products –
Tray, 24 or
60 pcs
J24 or J60
535
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800C Series NP0 Porcelain, High RF Power Ultra-Low ESR
SUGGESTED MOUNTING PAD DIMENSIONS
Case C Vertical Mount
Cap Value
All Values
Pad Size
A Min.
B Min.
C Min.
D Min.
Normal
.200
.050
.200
.300
High Density
.180
.030
.200
.260
Case C Horizontal Mount
Cap Value
All Values
Pad Size
A Min.
B Min.
C Min.
D Min.
Normal
.280
.050
.200
.300
High Density
.260
.030
.200
.260
Dimensions are in inches.
PERFORMANCE DATA
800 C Current Rating vs. Capacitance
100.0
8.2 pF
0.8
10 pF
0.4
1500 pF
% Change in Capacitance
Irms Current (amps)
39 pF
150 MHz
2700 pF
10 MHz
30 MHz
ESR (MilliOhms)
1.0
TCC= 0 ±30 PPM/°C
0.6
18 pF
10.0
800C Capacitance Change vs. Temperature
1
The current is based on a 65°C mounting surface
and a device thermal resistance of 15°C/W. A
power dissipation of 4 W will result in a case
temperature of 125°C.
0.2
0
-0.2
-0.4
-0.6
0.1
1
10
-0.8
Dotted line = Power dissipation limit
Solid line = Voltage limit (Vms/Xc)
(Typical)
100
1000
-1
-55
10000
-35
Capacitance (pF)
1000
-15
5
25
45
Temperature (Degrees °C)
800 C ESR vs. Frequency
100
ESR (MilliOhms)
8.2 pF
10 pF
18 pF
39 pF
220 pF
910 pF
2700 pF
3000 pF
10
1
10
100
1000
Frequency (MHz)
536
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062821
– rf microwave products –
65
85
105
125
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800E Series NPO Ceramic High RF Power Multilayer Capacitors
FEATURES
•
•
•
•
•
•
•
•
GENERAL DESCRIPTION
KYOCERA AVX’s 800 E Series offers superb performance in
demanding high RF power applications requiring consistent
and reliable operation. The combination of highly conductive
metal electrode systems, optimized case geometries, and
proprietary dielectrics, yields the lowest ESR. KYOCERA AVX's
new NPO low loss rugged dielectrics are designed to provide
superior heat transfer in high RF power applications. Ultralow ESR and superior thermal performance ensure that the
800 E Series products are your best choice for high RF power
applications from VHF through microwave frequencies.
FUNCTIONAL APPLICATIONS
• Bypass
• Coupling
• Tuning
• Impedance Matching
• DC Blocking
CIRCUIT APPLICATIONS
• HF/RF Power Amplifiers
• Transmitters
• Antenna Tuning
• Plasma Chambers
• Medical (MRI coils)
Mil-STD-202, Method 107, Condition A
Moisture Resistance
Mil-STD-202, Method 106
Low Voltage
Humidity
Mil-STD-202, Method 103, condition A,
with 1.5 VDC applied while subjected to
an environment of 85ºC with 85% relative
humidity for 240 hours
Life Test
MIL-STD-202, Method 108, for 2000 hours, at
125°C. Voltage applied.
120% of WVDC for capacitors rated at 1250
volts DC or less. 100% of WVDC for capacitors
rated above 1250 volts DC
Termination Styles
Available in various surface mount and leaded
styles. See Mechanical Configurations
Terminal Strength
Terminations for chips and pellets withstand
a pull of 10 lbs. min., 25 lbs. typical, for 5
seconds in direction perpendicular to the
termination surface of the capacitor. Test per
MIL-STD-202, method 211.
PACKAGING OPTIONS
Tape & Reel
Tray
(96 pcs)
ELECTRICAL SPECIFICATIONS
Temperature
Coefficient (TCC)
0 ±30 PPM/°C (-55°C to +125°C)
Capacitance Range
3.3 pF to 5100 pF
Operating Temperature
-55°C to +125°C
Quality Factor
Greater than 5,000
(3.3 pF to 1000 pF) @ 1 MHz.
Greater than 5,000
(1100 pF to 5,100 pF) @ 1 KHz.
Insulation Resistance
(IR)
Max Test Voltage is 500 VDC
105 Megohms min. @ 25ºC at 500 VDC
104 Megohms min. @ 125ºC at 500 VDC
Working Voltage (WVDC) See Capacitance Values table
ENVIRONMENTAL CHARACTERISTICS
Thermal Shock
Case E Size (.380” x .380”)
Capacitance Range 3.3 pF to 5100 pF
Ultra Low ESR
High Q
High RF Power
Ultra-Stable Performance
High RF Current/Voltage
High Reliability
Dielectric Withstanding
Voltage (DWV)
120% of WVDC for 5 seconds
Aging Effects
None
Piezoelectric Effects
None
Capacitance Drift
± (0.02% or 0.02 pF), whichever is greater
Retrace
Less than ±(0.02% or 0.02 pF),
whichever is greater.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070621
– rf microwave products –
537
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800E Series NPO Ceramic High RF Power Multilayer Capacitors
CAPACITANCE VALUES
Cap.
Code
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
200
220
240
270
300
330
Cap.
(pF)
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
Tol.
Rated
WVDC
Cap. Code Cap. (pF)
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
331
361
B, C, D
7200
F, G, J, K
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
Rated
WVDC
Tol.
7200
F, G, J, K
3600
Cap.
Code
391
431
471
511
561
621
681
751
821
911
102
112
122
132
152
162
182
202
222
242
272
302
332
392
472
512
Cap.
Code
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3900
4700
5100
Tol.
Rated
WVDC
3600
2500
F, G, J, K
2000
VRMS = 0.707 X WVDC
• SPECIAL VALUES, TOLERANCES AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY
HOW TO ORDER
800
220
E
J
TN
7200
X**
T
Series
Packaging
Case Size
T = Tape and Reel, 250 pc qty. Please see
last Column Mechanical Configuration
Table for Box and Tray Options
See mechanical dimensions below
Capacitance
Laser Marking
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
Voltage Rating
Termination Style Code
Capacitance Tolerance Code
Code
Tol.
B
C
D
F
G
J
K
M
±.1 pF
±.25 pF
±.5 pF
±1%
±2%
±5%
±10%
±20%
Please see 2nd Column Mechanical
Configuration Table
**Optional
The above part number refers to a 800 E Series (case size E) 22 pF capacitor, J tolerance (±5%), 7200 WVDC, with TN
termination (Tin Plated over Non-Magnetic Barrier Termination), laser marking and Tape and Reel Packaging
Add "D' instead of "X" for double-sided marking.
538
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
022222
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800E Series NPO Ceramic High RF Power Multilayer Capacitors
MECHANICAL CONFIGURATION
Series
& Case
Size
Term.
Code
E
800E
T
Outline
W/T is a Termination
Surface
Case Size
& Type
Y
LT
E
800E
MS
W
Microstrip
LT
E
800E
AR
Axial Ribbon
.380+.015-.010
(9.65+0.38 -0.25)
TL
LL
WL
.190
(4.83)
max.
.380+.035 -.010
(9.65+0.89-0.25)
W
Pkg Code
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
T&R, 250 pcs
Tray, 24 or
96 pcs
T
J24 or J96
High Purity
Silver Leads
LL = .750 (19.05) min
WL = .350 ±.010 (8.89 ±0.25)
TL = .010 ±.005 (0.25 ±0.13)
Leads are Attached with
High Temperature Solder.
Tray, 16 or
32 pcs
J16 or J32
N/A
Tray, 16 or
32 pcs
J16 or J32
Box, 20 pcs
B20
LT
LL
E
800E
.040
(1.02)
max.
Pkg Type
TL
LL
WL
Lead and Termination
Dimensions and Material
Thickness Overlap
Materials
(T)
(Y)
.380+.015 -.010
(9.65+0.38-0.25)
W
Solderable
Nickle
Barrier
Length
(L)
Body Dimensions
inches (mm)
Width
(W)
AW
W
Axial Wire
Silver-plated Copper Leads
ia. = .032 ±.002 (.813 ±.051)
D
LL = 2.25 (57.2) min.
•
LT
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
NON MECHANICAL CONFIGURATION
Series
& Case
Size
Term.
Code
E
800E
TN
Outline
W/T is a Termination
Surface
Case Size
& Type
Y
LT
E
MN
Non-Mag
Microstrip
WL
W
LT
E
800E
AN
Non-Mag
Axial Ribbon
BN
Non-Mag
Axial Wire
.380+.035-.010
(9.65+0.89-0.25)
W
RoHS Compliant
T&R, 250 pcs
Tin Plated over Non-Magnetic
Tray, 24 or 96 pcs
Barrier Termination
Pkg Code
T
J24 or J96
N/A
High Purity
Silver Leads
LL = .750 (19.05) min
WL = .350 ±.010 (8.89 ±0.25)
TL = .010 ±.005 (0.25 ±0.13)
Leads are Attached with
High Temperature Solder.
Tray, 16 or 32 pcs
J16 or J32
Tray, 16 or 32 pcs
J16 or J32
Box, 20 pcs
B20
LT
E
800E
.380 ±.010 170 (4.32)
(9.65 ±0.25)
max.
TL
LL
WL
Pkg Type
TL
LL
800E
.040
(1.02)
max.
.380+.015 -.010
(9.65+0.38-0.25)
W
Non-Mag
Solderable
Barrier
Body Dimensions
Lead and Termination
inches (mm)
Dimensions and Material
Length
Width
Thickness Overlap
Materials
(L)
(W)
(T)
(Y)
LL
W
Silver-plated Copper Leads
ia. = .032 ±.002 (.813 ±.051)
D
LL = 2.25 (57.2) min.
•
LT
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
539
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800E Series NPO Ceramic High RF Power Multilayer Capacitors
SUGGESTED MOUNTING PAD DIMENSIONS
W
L
W
391k
1k
39
T
T
L
Mount Type
Horizontal
Electrode Orientation
Vertical
Electrode Orientation
B
B
Pad Size
Normal
Vertical Mount
High Density
Normal
Horizontal Mount
High Density
A Min.
.185
.165
.405
.383
Case E
B Min.
.050
.030
.050
.030
C Min.
.325
.325
.325
.325
D Min.
.425
.385
.425
.385
Dimensions are in inches.
A
C
D
PERFORMANCE DATA
540
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800E Series NPO Ceramic High RF Power Multilayer Capacitors
PERFORMANCE DATA
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
541
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800E Series NPO Ceramic High RF Power Multilayer Capacitors
PERFORMANCE DATA
542
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800H Series NPO Ceramic High RF Power Multilayer Capacitors
FEATURES
•
•
•
•
•
•
•
•
PACKAGING OPTIONS
GENERAL DESCRIPTION
KYOCERA AVX’s 800 H Series offers superb performance in
demanding high RF power applications requiring consistent
and reliable operation. The combination of highly conductive
metal electrode systems, optimized case geometries, and
proprietary dielectrics, yields the lowest ESR. KYOCERA AVX’s
new NPO low loss rugged dielectrics are designed to provide
superior heat transfer in high RF power applications. Ultra-low
ESR and superior thermal performance ensure that the 800 H
Series products are your best choice for high RF power and
High CV applications.
FUNCTIONAL APPLICATIONS
• Bypass
• Coupling
• Tuning
• Impedance Matching
• DC Blocking
CIRCUIT APPLICATIONS
•
•
•
•
HF/RF Power Amplifiers
Transmitters
Antenna Tuning
Inductive Heating
Case H Size (.720" x .740")
Capacitance Range 100 pF to 20,000 pF
Ultra Low ESR
High Q
High RF Power
Ultra-Stable Performance
High RF Current/Voltage
High Reliability
• Plasma Chambers
• Induction Charging Systems
• Medical (MRI coils)
ENVIRONMENTAL CHARACTERISTICS
Thermal Shock
MIL-STD-202, Method 107, Condition A
Moisture Resistance
MIL-STD-202, Method 106
Low Voltage
Humidity
MIL-STD-202, Method 103, Condition A,
with 1.5 Volts DC applied while subjected
to an environment of 85°C with 85% relative
humidity for 240 hours min.
Life Test
MIL-STD-202, Method 108, for 2000 hours,
at 125°C at rated voltage.
Termination Styles
See Mechanical Configurations
Terminal Strength
Terminations for chips withstand a pull of
12 lbs. min., 20 lbs. typical, for 5 seconds in
direction perpendicular to the termination
surface of the capacitor. Test per MILSTD-202, method 211.
Tray
(4 pcs)
ELECTRICAL SPECIFICATIONS
Temperature
Coefficient (TCC)
0 ±30 PPM/°C (-55°C to +125°C)
Capacitance Drift
±(0.02% or 0.02 pF), whichever is greater
Operating Temperature
From -55°C to +125°C
Quality Factor
Greater than 5000
(100 pF to 1000 pF) @ 1 MHz.
Greater than 5000
(1100 pF to 20,000 pF) @ 1 KHz.
Insulation Resistance
(IR)
Max Test Voltage is 500 VDC
105 Megohms min. @ 25ºC at 500 VDC
104 Megohms min. @ 125ºC at 500 VDC
Working Voltage (WVDC) See Capacitance Values table
Dielectric Withstanding
Voltage (DWV)
120% of WVDC for 5 seconds
Aging Effects
None
Piezoelectric Effects
None
Capacitance Drift
± (0.02% or 0.02 pF), whichever is greater
Retrace
Less than ±(0.02% or 0.02 pF),
whichever is greater.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070621
– rf microwave products –
543
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800H Series NPO Ceramic High RF Power Multilayer Capacitors
CAPACITANCE VALUES
CAP.
CODE
CAP.
(pF)
CAP.
CODE
CAP.
(pF)
CAP.
CODE
CAP.
(pF)
101
100
561
560
332
3300
111
110
621
620
392
3900
121
120
681
680
472
4700
131
130
751
750
512
5100
151
150
821
820
562
5600
161
160
911
910
622
6200
181
180
102
1000
682
6800
201
200
112
1100
752
7500
221
220
122
1200
822
8200
241
240
132
1300
912
9100
271
270
152
1500
103
10000
301
300
162
1600
113
11000
331
330
182
1800
123
12000
361
360
202
2000
133
13000
391
390
222
2200
153
15000
431
430
242
2400
163
16000
471
470
272
2700
183
18000
511
510
302
3000
203
20000
TOL.
RATED
WVDC
8000
G, J, K
5000
TOL.
G, J, K
RATED
WVDC
5000
TOL.
RATED
WVDC
5000
3000
G, J, K
2000
SPECIAL VALUES, TOLERANCES AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY.
HOW TO ORDER
800
H
221
J
MN
8000
X
-
Series
Packaging
Case Size
Tray - 4 pcs - Leave Blank
See mechanical dimensions below
Laser Marking
Capacitance
WVDC
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
Termination Code
Capacitance Tolerance Code
Code
Tol.
J
K
M
±5%
±10%
±20%
**Optional
The above part number refers to a 800 H Series (case size H) 220 pF capacitor, J tolerance (±5%), 8000 WVDC,
with MN Non-Magnetic termination (Microstrip Termination), laser marking and Matrix Tray packaging.
544
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
072022
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800H Series NPO Ceramic High RF Power Multilayer Capacitors
NON MECHANICAL CONFIGURATION
Series
Term.
& Case
Code
Size
Case Size
& Type
Outline
W/T is a Termination
Surface
H
800H
WL
W
Microstrip
Lead and Termination
Dimensions and Material
Thickness
(T)
TL
LL
MN
Length
(L)
Body Dimensions
inches (mm)
Width
(W)
.220
(5.59)
max.
.735+.060 -.010
.750+.020 -.010
(18.67+1.524 -.254) (19.05+.508 -.254)
LT
Overlap
(Y)
N/A
Materials
High Purity Silver Leads
LL = .750 (19.05) min.
WL = .660 ±.010 (16.764±.254)
TL = .010 ±.001 (.254 ±.025)
Leads are Attached with High Temperature Solder
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
PERFORMANCE DATA
800 H ESR vs. Frequency
0.100
ESR (Ohms)
100 pF
390 pF
470 pF
1000 pF
2200 pF
3300 pF
5100 pF
6200 pF
20,000 pF
ESR (MilliOhms)
0.010
10
100
1000
Frequency (MHz)
800 H FPR vs. Capacitance
1000
Frequency (MHz)
Typical
Typical
100
10
1
10
100
1000
10000
100000
Capacitance (pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070621
– rf microwave products –
545
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800H Series NPO Ceramic High RF Power Multilayer Capacitors
PERFORMANCE DATA
800 H Current vs Capacitance
100
RMS Current (Amps)
The current rating is based on a 65 oC mounting
surface with a device thermal resistance of 8.6 °CW.
A power dissipation of 7 W will result in a case
temperature of 125 °C.
2 MHz
10
10 MHz
30 MHz
ESR (MilliOhms)
1
100
1000
10000
Capacitance (pF)
800 H Capacitance Change vs. Temperature
1
0.8
TCC= 0 ±30 PPM/C
0.6
% Change in Capacitance
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-55
-35
-15
5
25
45
65
85
105
Temperature (Degrees C)
546
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
125
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800R Series NPO Ceramic Ultra-Low ESR Multilayer Capacitors
FEATURES
• Case R Size (.070” x .090”)
• Capable of highest RF Power
• Rugged, reliable NPO dielectric • RoHS Compliant / Lead-Free
• Optimized for highest self
• Optimized for lowest ESR
resonant frequency
and superior heat transfer
• Capacitance Range
1 pF to 100 pF
PACKAGING OPTIONS
GENERAL DESCRIPTION
KYOCERA AVX’s 800 R Series offers superb performance in
demanding high RF power applications requiring consistent
and reliable operation. The combination of optimized case
geometry, highly conductive electrode formulations and
proprietary dielectrics, yields the lowest ESR and superior
heat transfer. KYOCERA AVX’s new NPO low loss rugged
dielectrics are designed to provide superior heat transfer
in high RF power applications. Ultra-low ESR and superior
thermal performance ensure that the 800 R Series products
are your best choice for high RF power applications from UHF
through microwave frequencies.
• Digital HD FM
Transmitters
• Avionics
• Digital HDTV Transmitters
• Medical Electronics
TYPICAL CIRCUIT APPLICATIONS
•
•
•
•
High RF Power Filter Networks
Matching Networks
Output Coupling
DC Blocking
ENVIRONMENTAL CHARACTERISTICS
Quality Factor (Q)
> 2,000 @ 1 MHz
Temperature Coefficient
0 ±30 PPM/°C (-55°C to +125°C)
of Capacitance (TCC)
TYPICAL APPLICATIONS
• Homeland Security/Public
Safety Radio (APCO-25)
• WiMAX/LTE*
• Satellite Systems
• Microwave Communications
Tape & Reel
•
•
•
•
Combiners
Couplers
Antenna Coupling
Bypassing
ENVIRONMENTAL TEST
Insulation Resistance
(IR)
1 pF to 100 pF:
105 Megohms min. @ +25°C at rated WVDC
104 Megohms min. @ +125°C at rated WVDC
Working Voltage
(WVDC)
500 WVDC
Dielectric Withstanding
Voltage (DWV)
Case R: 250% of rated WVDC for 5 secs
Aging Effects
None
Piezoelectric Effects
None
Capacitance Drift
±(0.02% or 0.02 pF), whichever is greater
Operating
Temperature Range
From -55°C to +125°C
Termination Styles
RoHS Compliant and Solder Plate See
Mechanical Configurations
Terminal Strength
Terminations for chips withstand a pull of
5 lbs. min., 15 lbs. typical, for 5 seconds in
direction perpendicular to the termination
surface of the capacitor. Test per MILSTD-202, Method 211.
Thermal Shock MIL-STD-202, Method 107, Condition A.
Moisture
Resistance
MIL-STD-202, Method 106.
Low Voltage
Humidity
MIL-STD-202, Method 103, Condition A, with 1.5 Volts
D.C. applied while subjected to an environment of 85°C
with 85% relative humidity for 240 hours min.
Life Test
MIL-STD-202, Method 108, for 2000 hours, at 125°C
200% WVDC applied
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070121
– rf microwave products –
547
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800R Series NPO Ceramic Ultra-Low ESR Multilayer Capacitors
CAPACITANCE VALUES
Cap. Code
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
Cap.(pF)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
Tol.
Rated WVDC
B, C, D
500
Cap. Code
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
200
Cap. (pF)
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
Tol.
Rated WVDC
B, C, D
B, C, J,
K, M
G, J
K, M
500
Cap. Code
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
Cap. (pF)
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
Tol.
Rated WVDC
G, J
K, M
500
VRMS = 0.707 X WVDC
SPECIAL VALUES, TOLERANCES AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY.
HOW TO ORDER
800
R
100
J
T
500
X
T
Series
Packaging
Case Size
T = Tape and Reel, 500 pc.
TS = Electrodes in Horizontal Orientation
Tape and Reel: 500 pc.
See mechanical dimensions below
Capacitance
Please see last Column Mechanical Configuration Table for
other options
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
Laser Marking (Optional)
WVDC
Capacitance Tolerance Code
Code
Tol.
B
C
D
±0.1 pF ±0.25 pF ±0.5 pF
G
J
K
M
±2%
±5%
±10%
±20%
Termination Code
The above part number refers to a 800 R Series (case size R) 10 pF capacitor, J tolerance (±5%), 500 WVDC, with T termination
(Tin Plated over Nickel Barrier, RoHS Compliant), laser marked, and tape and reel packaging.
*Consult ATC for other quantities.
548
Please see 2nd Column Mechanical
Configuration Table
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062821
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800R Series NPO Ceramic Ultra-Low ESR Multilayer Capacitors
MECHANICAL CONFIGURATION
Series & Case
Size
Term.
Code
Case Size
& Type
Body Dimensions
inches (mm)
Length (L)
Width (W)
Thickness (T)
Outline ES W/T
is a Termination
Surface
Lead and Termination
Dimensions and Material
Overlap (Y)
Materials
R
800R
T
Solderable
Nickel
Barrier
R
800R
W
Solder Plate
Pkg Type
& Qty
Pkg Code
.070 ±.015
(1.78±0.38)
.090 ±.010
(2.29±0.25)
.115
(2.92)
max.
.010+.010 - .005
(0.25+0.25 - 0.13)
RoHS Compliant
Tin Plated over
Nickel Barrier
Termination
T&R, 1000 or
500 pcs
Horizontal
T&R, 1000 or
500 pcs
T1K or T
TS1K or
TS
.070 ±.015
(1.78±0.38)
.090 ±.010
(2.29±0.25)
.115
(2.92)
max.
.010+.010 - .005
(0.25+0.25 - 0.13)
Tin/ Lead, Solder
Plated over Nickel
Barrier Termination
T&R, 1000 or
500 pcs
Horizontal
T&R, 1000 or
500 pcs
T1K or T
TS1K or
TS
Pkg Type
& Qty
Pkg
Code
T&R, 1000 or
500 pcs
Horizontal
T&R, 1000 or
500 pcs
T1K or T
TS1K or
TS
NON-MAGNETIC CONFIGURATION
Series &
Case Size
Term. Case Size
Code
& Type
Non-Magnetic
Configuration
Body Dimensions
inches (mm)
Length (L)
Width (W)
Thickness
(T)
.070 ±.015
(1.78±0.38)
.090 ±.010
(2.29±0.25)
.115
(2.92)
max.
Lead and Termination
Dimensions and Material
Overlap (Y)
Materials
.010+.010 - .005
(0.25+0.25 - 0.13)
RoHS Compliant
Tin Plated over
Non-Magnetic
Barrier Termination
R
800R
TN
Non-Mag
Solderable
Barrier
SUGGESTED MOUNTING PAD DIMENSIONS
L
W
391k
1k
39
T
T
L
W
Mount Type
Horizontal
Electrode Orientation
Vertical
Electrode Orientation
B
B
Pad Size
Normal
Vertical Mount
High Density
Normal
Horizontal Mount
High Density
A Min.
.125
.115
.110
.090
Case R
B Min.
.050
.030
.050
.030
C Min.
.030
.030
.030
.030
D Min.
.130
.090
.130
.090
Dimensions are in inches.
A
C
D
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
070121
– rf microwave products –
549
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
800R Series NPO Ceramic Ultra-Low ESR Multilayer Capacitors
1.00
800 R
ESR vs. Frequency
800 R Resonance
Vertical and Horizontal Orientation
100
W
T
1.0 pF
Frequency (GHz)
L
3.3 pF
ESR (Ohms)
10 pF
12 pF
0.10
15 pF
33 pF
47 pF
51 pF
Horizontal Orientation
T
W
L
Vertical Orientation
10
Vertical Fpr
Horizontal Fpr
100 pF
Vertical &
Horizontal Fsr
Vertical Fpr
Horizontal Fpr
0.01
100
Vertical & Horizontal Fsr
1000
1
10000
Frequency (MHz)
1.0
10.0
Capacitance (pF)
800R Capacitance Change vs. Temperature
1
0.8
TCC= 0 ±30 PPM/C
0.6
% Change in Capacitance
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-55
-35
-15
5
25
45
65
85
105
125
Temperature (Degrees C)
550
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
100.0
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
900C Series X7R Ceramic RF Power Multilayer Capacitors
GENERAL DESCRIPTION
KYOCERA AVX, the industry leader, offers new improved ESR/ESL performance for
the 900 C Series RF Capacitors. This Series exhibits superior volumetric efficiency,
providing high levels of capacitance for HF/ RF power applications. Ceramic
construction provides a rugged, hermetic package.
KYOCERA AVX offers an encapsulation option for applications requiring extended
protection against arc-over and corona.
PACKAGING OPTIONS
FEATURES
•
•
•
•
Case C Size (.250" x .250")
Low ESR / ESL
Rugged Construction
Encapsulation Option
Available *
• Capacitance Range
0.01μF to 1 μF
• Mid-K
• High Reliability
Tape & Reel
Vertical
Orientation
Tape & Reel
Special
Packaging
Available
Cap-Pak®
(100 pcs)
FUNCTIONAL APPLICATIONS
• Bypass
• Coupling
• DC Blocking
ELECTRICAL SPECIFICATIONS
TYPICAL CIRCUIT APPLICATIONS
• HF/RF Power Amplifiers
• High Frequency Switch Mode
Power Supplies
*For leaded styles only.
• Medical Electronics.
ENVIRONMENTAL CHARACTERISTICS
Thermal Shock
MIL-STD-202, Method 107, Condition A.
Moisture
Resistance
MIL-STD-202, Method 106.
Low Voltage
Humidity
MIL-STD-202, Method 103, Condition A,
with 1.5 Volts DC applied while subjected to an
environment of 85°C with 85% relative humidity for
240 hours min.
Dissipation Factor (DF)
2.5% max. at 1 KHz
Temperature Coefficient
of Capacitance (Tcc)
Less than ±15% (-55°C to +125°C)
Insulation Resistance
(IR)
0.01 MFd to 1 MFd
1000 megohms min. @ +25°C at
rated WVDC.
100 megohms min. @ +125°C at
rated WVDC.
Working Voltage (WVDC) See Capacitance Values Table
Life Test
MIL-STD-202, Method 108, for 2000 hours, at
125°C. 200% WVDC applied.
Solderability
Mil-STD-202, Method 208
Terminal
Strength
Terminations for chips and pellets withstand a
pull of 5 lbs. min., 10 lbs. typical, for 5 seconds in
direction perpendicular to the termination surface
of the capacitor.
Dielectric Withstanding
Voltage (DWV)
Case C: 250% of rated
WVDC for 5 secs.
Aging Effects
3% maximum per decade hour
Piezoelectric Effects
Negligible
Dielectric Absorption
2% typical
Operating
Temperature Range
-55°C to +125°C
(No derating of working voltage)
Termination Styles
Available in various surface mount
and leaded styles. See Mechanical
Configurations
Terminal Strength
Terminations for chips and pellets
withstand a pull of 10 lbs. min., 15
lbs. typical, for 5 seconds in direction
perpendicular to the termina-tion surface
of the capacitor. Test per MIL-STD-202,
method 211.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
551
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
900C Series X7R Ceramic RF Power Multilayer Capacitors
CAPACITANCE VALUES
Cap. Code
Cap. (Mfd)
Tol.
Rated Wvdc
Code
K
M
N
Tol.
±10%
±20%
±30%
103
.010
300
153
.015
300
223
.022
300
333
.033
250
473
.047
250
683
.068
250
104
.10
154
.15
224
.22
200
334
.33
150
474
.47
150
684
.68
150
824
.82
100
105
1.0
100
200
K, M, N
200
VRMS = 0.707 X WVDC
• SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE.
• ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY.
HOW TO ORDER
900
C
105
M
W
100
X
T
Series
Packaging
Case Size
Please see last Column Mechanical Configuration Table
for other options
T = Tape and Reel, 500 pc qty
See mechanical dimensions below
Capacitance
Laser Marking (Optional)
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
WVDC
Termination Style Code
Please see 2nd Column Mechanical
Configuration Table
Capacitance Tolerance Code
Code
Tol.
K
M
N
±10%
±20%
±30%
The above part number refers to a 900 C Series (case size C) 1.0 MFd capacitor,
M tolerance (±20%), 100 WVDC, with W termination (Tin/Lead, Solder Plated over Nickel Barrier),
laser marking and ATC Matrix Tray packaging.
552
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
900C Series X7R Ceramic RF Power Multilayer Capacitors
MECHANICAL CONFIGURATIONS
Series
& Case
Size
Term.
Code
900C
W
Case Size
& Type
C
Outlines
W/T Is A
Termination Surface
Y
C
900C
W
C
L
Y
W
Solderable
Nickel
Barrier
L
C
900C
T
.230 +.020
-.010 (5.84
+0.51 -0.25
Y
P
T
T
.230+.025
-.010 (5.84
+0.64 -0.25)
L
Pellet
900C
T
.230+.020
-.010 (5.84
+0.51 -0.25)
W
Solder Plate
MS
WL
W
L
T
C
AR
WL
W
L
Axial Ribbon
T
LL
C
900C
.250 ±.015
(6.35 ±0.38)
TL
LL
AW
W
Axial Wire
L
•
.145 (3.68)
max. for
capacitance
values
< 0.82 MFd;
.245 ±.025
(6.22 ±0.64)
N/A
T
VA
Veritical
Axial Ribbon
C
900C
LL
RW
T
Radial Wire
L
W
Pkg Type
& Qty
Pkg
Code
Tin/Lead, Solder Plated over
Nickel Barrier Termination
T250
T & R 500
Cap PaK 36
T250
T
C36
Heavy Tin/Lead Coated,
over Nickel Barrier Termination
T250
T&R 500
Cap PaK 36
T250
T
C36
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
T250
T & R 250
Cap PaK 36
T250
T
C36
Cap Pak
24
C24
Box, 24
B24
Silver-plated Copper Leads
LL = 1.0 (25.4) min.
Dia. = .032 ±.002 (0.81 ±0.05
Cap Pak
24
C24
Silver Leads
LL = .500 (12.7) min.
WL = * See below
TL = .004 ±.001 (.102 ±.025)
Cap Pak
24
C24
Silver-plated Copper Leads
LL = 1.0 (25.4) min.
Dia. = .032 ±.002 (0.81 ±0.05)
Cap Pak
24
C24
High Purity
Silver Leads
LL = .500 (12.7) min.
WL = .240 ±.005
(6.10 ±.127)
TL = .004 ±.001
(.102 ±.025)
Leads are Attached with
High Temperature Solder.
.165 (4.19)
max. for
capacitance
values
≥0.82 MFd.
C
900C
Lead And Termination
Dimensions And Materials
Overlap
Materials
(Y)
.040
(1.02)
max.
TL
LL
Microstrip
900C
Length
(L)
Body Dimensions
Inches (Mm)
Width
Thickness
(W)
(T)
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
** WL = .110 (2.79) for capacitance values < 0.82 MFd.; WL = .130 (3.30) for capacitance values ≥ 0.82 MFd.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
062122
– rf microwave products –
553
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
900C Series X7R Ceramic RF Power Multilayer Capacitors
NON-MAGNETIC MECHANICAL CONFIGURATIONS
Series
& Case
Size
Term.
Code
900C
WN
Outlines
W/T Is A
Termination Surface
Case Size
& Type
C
900C
Y
W
Non-Mag
Solder Plate
T
Y
C
Non-Mag
Solderable
Barrier
TN
L
W
L
T
Body Dimensions
Inches (Mm)
Length (L)
Width (W)
Thickness (T)
.230 +.025 -.010
(5.84 + 0.64-0.25)
.230 +.025 -.010
(5.84 + 0.64-0.25)
.145 (3.68) max.
< 0.82 MFd
.250 ±.015
.165 (4.19)
(6.35 ±0.38)
max.
≥0.82 MFd
Lead And Termination
Dimensions And Materials
Overlap (Y)
Materials
.040 (1.02)
max.
Pkg Type
& Qty
Pkg
Code
Tin/Lead, Solder
Plated over
Non-Magnetic Barrier
Termination
T & R 500
Cap PaK
36
T
C36
RoHS Compliant
Tin Plated over
Non-Magnetic
Barrier Termination
T & R 500
Cap PaK
36
T
C36
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS
compliant. 105M 105M
SUGGESTED MOUNTING PAD DIMENSIONS
W
L
W
391k
1k
39
T
T
L
Horizontal
Electrode Orientation
Vertical
Electrode Orientation
B
A
Cap Value
< .82 µF
≥ .82 µF
Case C Vertical Mount
Pad Size
A Min.
B Min.
Normal
.150
.050
High Density
.130
.030
Normal
.185
.050
High Density
.165
.030
B
C
All Values
Normal
High Density
Horizontal Mount
.150
.050
.130
.030
C Min.
.200
.200
.200
.200
D Min.
.300
.260
.300
.260
.200
.200
.300
.260
D
554
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
010422
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
900C Series X7R Ceramic RF Power Multilayer Capacitors
PERFORMANCE DATA
ESR VS CAPACITANCE
ATC SERIES 900, CASE C
0.1
Q VS CAPACITANCE
ATC SERIES 900, CASE C
ESR (Ohms)
100
10
Q
30 MHz
30 MHz
1
0.01
0.01
(Typical)
0.1
0.1
1
(Typical)
0.01
CAPACITANCE(mF)
100
RMS CURRENT (Amps)
FREQUENCY (MHz)
CURRENT RATING VS CAPACITANCE
ATC SERIES 900, CASE C
10
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
15°C/W. A power dissipation of 4 W will result
in a case temperature of 125°C.
30 MHz
10
(Typical)
1
0.01
0.1
1
CAPACITANCE (mF)
SERIES RESONANCE VS CAPACITANCE
ATC SERIES 900, CASE C
100
0.1
Dotted line = Power dissipation limited
1
1
0.01
CAPACITANCE (mF)
0.1
1
CAPACITANCE (mF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
555
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
920C Series X7R Ceramic RF Power Multilayer Capacitors
GENERAL DESCRIPTION
KYOCERA AVX’s 920C Series MLC capacitors offer superior quality at a competitive
price. This MLC Series is manufactured for KYOCERA AVX in accordance with KYOCERA
AVX’s high quality standards. Ceramic construction provides a rugged and reliable
hermetic package. Available termination styles include a standard solder plate over a
nickel barrier for most applications and palladium silver for non-magnetic applications
commonly used in medical electronics.
PACKAGING OPTIONS
FEATURES
•
•
•
•
Case C Size (.250" x .250")
Low ESR / ESL
Rugged Construction
Encapsulation with
Encapsulation Option*
• Capacitance Range
0.01μF to 1 μF
• Mid-K
• High Reliability
Tape & Reel
Vertical
Orientation
Tape & Reel
Special
Packaging
Available
Cap-Pak®
(100 pcs)
FUNCTIONAL APPLICATIONS
• Bypass
• Coupling
• DC Blocking
ELECTRICAL SPECIFICATIONS
CIRCUIT APPLICATIONS
• HF Amplifiers
• Switch Mode Power Supplies
• High Frequency SMPS Filters
*For leaded styles only.
ENVIRONMENTAL CHARACTERISTICS
Thermal Shock
MIL-STD-202, Method 107, Condition A.
Moisture
Resistance
MIL-STD-202, Method 106.
Low Voltage
Humidity
MIL-STD-202, Method 103, Condition A,
with 1.5 Volts DC applied while subjected to an
environment of 85°C with 85% relative humidity for
240 hours min.
2.5% max. at 1 KHz
Temperature Coefficient
of Capacitance (Tcc)
Less than ±15% (-55°C to +125°C)
Insulation Resistance
(IR)
0.01 MFd to 1 MFd
1000 megohms min. @ +25°C at
rated WVDC.
100 megohms min. @ +125°C at
rated WVDC.
Working Voltage (WVDC) See Capacitance Values Table
Life Test
MIL-STD-202, Method 108, for 2000 hours, at
125°C. 200% WVDC applied.
Solderability
Mil-STD-202, Method 208
556
Dissipation Factor (DF)
Dielectric Withstanding
Voltage (DWV)
Case C: 250% of rated
WVDC for 5 secs.
Aging Effects
3% maximum per decade hour
Piezoelectric Effects
Negligible
Dielectric Absorption
2% typical
Operating
Temperature Range
-55°C to +125°C
(No derating of working voltage)
Termination Styles
Available in various surface mount
and leaded styles. See Mechanical
Configurations
Terminal Strength
Terminations for chips and pellets
withstand a pull of 10 lbs. min., 15lbs.
typical, for 5 seconds in direction
perpendicular to the termina-tion surface
of the capacitor. Test per MIL-STD-202,
method 211.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012021
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
920C Series X7R Ceramic RF Power Multilayer Capacitors
CAPACITANCE VALUES
Cap. Code
Cap. (Mfd)
103
.010
153
.015
223
333
473
.047
683
.068
104
.10
154
.15
Tol.
Rated Wvdc
Cap. Code
Cap. (Mfd)
224
.22
334
.33
.022
474
.47
.033
684
.68
824
82
105
1.0
–
–
–
–
300
K, M
250
200
Tol.
Rated Wvdc
200
150
K, M
100
–
HOW TO ORDER
920
C
105
M
W
100
T
Series
Packaging
Case Size
T = Tape and Reel
Please see last Column Mechanical Configuration Table
for other options
See mechanical dimensions below
Capacitance
WVDC
Termination Code
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
Third digit = number of zeros or after “R” significant figures
Capacitance Tolerance Code
Code
Tol.
K
M
±10%
±20%
The above part number refers to a 920 C Series (case size C) 1.0 MFd capacitor, M tolerance (±20%), 100 WVDC, with W termination (solder plate) and Tape and Reel Packaging.
MECHANICAL CONFIGURATIONS
Series& Term.
Case Size Code
920C
920C
W
T
Case Size
& Type
C
Solder
Plate
C
Solderable
Nickel
Barrier
Outlines
W/T Is A
Termination Surface
Y
W
L
T
Y
W
L
T
Body Dimensions
Inches (mm)
Lead And Termination
Dimensions and Materials
Pkg Type
& Qty
Pkg
Code
SOLDER PLATE
Nickel barrier, solder plated. Rugged
high performance termination for
lower cost, high volume applications
T & R 500
Cap PaK
36
T
C36
RoHS Compliant
Tin Plated over Nickel Barrier
Termination
T & R 500
Cap PaK
36
T
C36
Lead And Termination
Dimensions and Materials
Overlap (Y)
Materials
Pkg Type
& Qty
Pkg
Code
Length (L)
Width (W)
Thickness
(T)
Overlap
(Y)
Materials
0.22+.020 -.010
(5.58+0.51 -0.25)
.250 ±.015
(6.35 ±0.38)
.157 (3.98)
max.
.040
(1.02)
max.
0.22+.020 -.010
(5.58+0.51 -0.25)
.250 ±.01
(6.35 ±0.25)
.157 (3.98)
max.
NON-MAGNETIC MECHANICAL CONFIGURATIONS
Series
& Case
Size
Term.
Code
Case Size
& Type
C
920C
CN
Outlines
W/T Is A
Termination Surface
Y
W
Non-Mag
Chip
C
L
T
Y
920C
TN
Non-Mag
Solderable
Nickel
Barrier
W
L
T
Length (L)
Body Dimensions
Inches (mm)
Width (W)
Thickness (T)
0.22+.020 -.010
(5.58+0.51 -0.25)
.250 ±.01
(6.35 ±0.25)
.157 (3.98)
max
0.22+.020 -.010
(5.58+0.51 -0.25)
.250 ±.01
(6.35 ±0.25)
.157 (3.98)
max
.045 (1.14) max.
NON-MAGNETIC
PALLADIUM
SILVER
TERMINATIONS
T & R 500
Cap PaK
36
T
C36
.045 (1.14) max.
RoHS Compliant
Tin Plated over
Non-Magnetic
L T Barrier
Termination
T & R 500
Cap PaK
36
T
C36
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
010422
– rf microwave products –
557
RF/Microwave Multilayer Capacitors (MLC)
CDR Series — MIL-PRF-55681/4/5 (RF/Microwave Chips)
HOW TO ORDER
CDR
12
B
G
101
A
F
W
S
Designation
Failure Rate Level
Identifies established
reliability, ceramic dielectric,
fixed, and chip capacitors
(Established at 90% confidence)
M = 1% per 1,000 hours
P = 0.1% per 1,000 hours
R = 0.01% per 1,000 hours
S = 0.001% per 1,000 hours
Style
Termination Finish
(Military Designations) Code
Identifies dimensions of the
capacitor and lead type,
where applicable.
N = Gold over Nickel over Silver (CDR11, CDR13)
S = Solder Coated, Final (CDR12, CDR14, CDR23, CDR25)
T = Silver (CDR21, CDR22, CDR24)
U = Solder Coated, Nickel Barrier (CDR12, CDR14)
W = Solder plated, nickel barrier
Rated Temperature
-55°C to +125°C
Voltage Temperature (TCC) Limits
G = +90 ±20 PPM/°C
P = 0 ±30 PPM/°C
(CDR12, CDR14, not for new designs)
Y = Base metallization-barrier metal-tin (100 percent)
Z = Solder plated, Nickel Barrier (CDR12, CDR14)
N and U Terminations preferred for best
solderability, thermocompression bonding, leach
and migration resistance, and shelf life for chips
and pellets.
Capacitance Code
The first two digits represent significant figures and the last
digit specifies the number of zeros to follow. When fractional
values of pF are required, the letter R shall be used to indicate
the decimal point.
Capacitance Tolerance Code
Rated DC Voltage @ 125°C
A = 50 VDC
D = 300 VDC
B = 100 VDC
E = 500 VDC
= ±.1 pF
B
G = ±2%
C = 200 VDC
K = 150 VDC
C = ±.25 pF
J = ±5%
D = ±.5 pF
K = ±10%
TABLE I - STYLES CDR11 AND CDR12 CAPACITOR CHARACTERISTICS
Type Designation *
CDR1-B-0R1KB-- to CDR1-B-0R2---B-CDR1-B-0R3K--- to CDR1-B-0R4--CDR1-B-0R5K--- to CDR1-B-2R2---**
CDR1-B-2R4K--- to CDR1-B-6R2---***
CDR1-B-6R8K--- to CDR1-B-9R1---***
CDR1-B-100K--- to CDR1-B-101K---***
CDR1-BP111K--- to CDR1-BP621---***
CDR1-BP681A--- to CDR1-BP102---***
Capacitance
Range (pF)
Capacitance Tolerance
Available
0.1 pF to 0.2 pF
0.3 pF to 0.4 pF
0.5 pF to 2.2 pF
2.4 pF to 6.2 pF
6.8 pF to 9.1 pF
10 pF to 100 pF
110 pF to 620 pF
680 pF to 1000 pF
B
B, C
B, C, D
B, C, D
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Rated Temp. &
Voltage-Temp Limits
Rated DC
Voltage
Characteristic BG
(+90 ±20 PPM/°C)
and Characteristic BP
(0 ±30 PPM/°C)
A = 50
K = 150
BP
A = 50
B = 100
TABLE II - STYLES CDR13 AND CDR14 CAPACITOR CHARACTERISTICS
Type Designation *
Capacitance
Range (pF)
Capacitance Tolerance
Available
CDR1-B-0R1EB-- to CDR1-B-0R2---B-CDR1-B-0R3E--- to CDR1-B-0R4--CDR1-B--0R5E--- to CDR1-B-2R2---**
CDR1-B-2R4E--- to CDR1-B-6R2---***
CDR1-B-6R8E--- to CDR1-B-9R1---***
CDR1-B-100E--- to CDR1-B-101---***
CDR1-B-111D--- to CDR1-B-201---***
CDR1-B-221C--- to CDR1-B-471C---***
CDR1-B-511B--- to CDR1-B-621---***
CDR1-B-681A--- to CDR1-B-102A---***
CDR1-BP112A--- to CDR1-BP512A---***
0.1 pF to 0.2 pF
0.3 pF to 0.4 pF
0.5 pF to 2.2 pF
2.4 pF to 6.2 pF
6.8 pF to 9.1 pF
10 pF to 100 pF
110 pF to 200 pF
220 pF to 470 pF
510 pF to 620 pF
680 pF to 1000 pF
1100 pF to 5100 pF
B
B, C
B, C, D
B, C, D
B, C, J, K, M
Rated Temp. &
Voltage-Temp Limits
"Characteristic BG
(+90 ±20 PPM/°C)
and Characteristic BP
(0 ±30 PPM/°C)"
F, G, J, K, M
BP
Rated DC
Voltage
C = 200
E = 500
C = 200 D = 300
C = 200
A = 50 B = 100
A = 50
* Complete type designation will include additional symbols to indicate style, voltage-temperature limits, capacitance tolerance
(where applicable), termination finish, and failure rate level.
** Intermediate values in this category are in 0.1 pF steps.
*** Intermediate values in each category are given by the RETMA 5% Table.
558
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
121721
– rf microwave products –
F = ±1%
M = ±20%
RF/Microwave Multilayer Capacitors (MLC)
CDR Series — MIL-PRF-55681/4/5 (RF/Microwave Chips)
TABLE III - STYLES CDR21-CDR25 CAPACITOR CHARACTERISTICS
Type Designation *
CDR2-B-0R1EB-- to CDR2-B-0R2EB-CDR2-B-0R3E--- to CDR2-B-0R4E--CDR2-B--0R5E--- to CDR2-B-2R2E---**
CDR2-B-2R4E--- to CDR2-B-6R2E---***
CDR2-B-6R8E--- to CDR2-B-9R1E---***
CDR21-B-100E--- to CDR2-B-101E---***
CDR2-B-111D--- to CDR2-B-201D---***
CDR2-B-221C--- to CDR2-B-471C---***
CDR2-B-511B--- to CDR2-B-621B---***
CDR2-B-681A--- to CDR2-B-102A---***
CDR2-BP112A--- to CDR2-BP512A---***
Capacitance
Range (pF)
Capacitance Tolerance
Available
0.1 pF to 0.2 pF
0.3 pF to 0.4 pF
0.5 pF to 2.2 pF
2.4 pF to 6.2 pF
6.8 pF to 9.1 pF
10 pF to 100 pF
110 pF to 200 pF
220 pF to 470 pF
510 pF to 620 pF
680 pF to 1000 pF
1100 pF to 5100 pF
B
B, C
B, C, D
B, C, D
B, C, J, K, M
Rated Temp. &
Voltage-Temp Limits
Rated DC
Voltage
500 = E
Characteristic BG
(+90 ±20 PPM/°C)
and Characteristic BP
(0 ±30 PPM/°C)
300 = D
200 = C
100 = B
F, G, J, K, M
50 = A
BP
* Complete type designation will include additional symbols to indicate style, voltage-temperature limits, capacitance tolerance
(where applicable), termination finish (T for styles CDR21, CDR22 and CDR24, and S for styles CDR23 and CDR25), and failure rate level.
Please note: Leaded devices CDR 21 through CDR 25 are available to the R Failure Rate Level only.
** Intermediate values in this category are in 0.1 pF steps.
*** Intermediate values in each category are given by the RETMA 5% Table as follows: 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91.
TABLE I - STYLES CDR11 AND CDR12 CAPACITOR CHARACTERISTICS
MIL-PRF-55681
Styles
CDR 11
CDR 13
CDE 12
CDR 14
CDR 12
CDR 14
CDR 21
CDR 22
CDR 24
CDR 23
CDR 25
Case
Size
Type
Outlines
Body Dimensions
Length
Width
Thickness
A
Chip
CA
B
Chip
CA
A
Pellet
P
B
Pellet
P
A
Solder Plate
W
.055 ±.015
(1.4 ±0.38)
.020/.057
(0.51/1.45)
B
Solder Plate
W
.110 ±.020
(2.79 ±0.51)
.030/.102
(0.76/2.59)
B
Microstrip
MS
B
B
B
B
.055 ±.015
(1.4 ±0.38)
.110 ±.020
(2.79 ±0.51)
W/T is a
Termination Surface
.055 ±.025
(1.4 ±0.63)
.110 +.035 -.020
W/T is a
(2.79 +0.89 -0.51)
Termination Surface
W/T is a
Termination Surface
.055 ±.015
(1.4 ±0.38)
.110 ±.020
(2.79 ±0.51)
Lead & Termination
Dimensions & Materials
.020/.057
(0.51/1.45) N = Gold Over Nickel Over Silver N is
ATC’s UNI-TERM®
.030/.102
(0.76/2.59)
.020/.057
(0.51/1.45) S = Solder Coated, Final
U = Solder Coated, Nickel Barrier U is
.030/.102
ATC’s BARRIER//CAP®
(0.76/2.59)
W = Nickel Barrier, Solder Plate.
Termination T = Silver
Length
Width
Thickness
min.
Axial Ribbon
AR
Radial Ribbon
RR
.135 ±.015
(3.43 ±0.38)
.110 ±.015
(2.79 ±0.38)
.060/.100
(1.52/2.54)
.250
(6.35)
.093±.005 .004±.001
(2.36±0.13) (0.10±0.03)
Radial Wire
RW
Terminations S = Solder Coated
min.
#26 AWG
Axial Wire
AW
.50
(12.7)
.016
(.375)
dia. nom.
All dimensions are in inches, except those in parentheses which are in millimeters.
All leads and ribbon are silver and are attached with high temperature solder.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– rf microwave products –
559
RF/Microwave Multilayer Capacitors (MLC)
CDR Series — MIL-PRF-55681/4/5 (RF/Microwave Chips)
Equiv. KYOCERA AVX
Part No. Characteristics
Style
CDR11
CDR12
CDR13
CDR14
BP
100A
100A
100B
100B
700A
700A
700B
700B
Equiv. KYOCERA AVX
Part No. Characteristics
Style
CDR21
CDR22
CDR23
CDR24
CDR25
BG
BG
BP
100B ------ MS
100B ------ AR
100B ------ RW
100B ------ RR
100B ------ AW
700B ------ MS
700B ------ AR
700B ------ RW
700B ------ RR
700B ------ AW
PACKAGING
Standard Packaging Quantity
CDR11-12 = 100 pcs per waffle pack
CDR13-14 = 100 pcs per waffle pack
TAPE & REEL
All tape and reel specifications are in compliance with EIA RS481(equivalent to IEC 286 part 3).
Sizes CDR11/12 through 13/14.
— 8mm carrier
— 7” reel: ≤0.040” thickness = 100, 300, 500, 1000, 2000* pcs
≤0.075” thickness = 100, 300, 500, 1000, 2000* pcs
* QTY 2000 only applies to CDR11-12
560
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
050721
– rf microwave products –
RF/Microwave Multilayer Capacitors (MLC)
Performance Curves
TYPICAL ESR vs. FREQUENCY
MIL-PRF-55681E - BG
TYPICAL Q vs. FREQUENCY
MIL-PRF-55681E - BG
10000
1
1000
ESR (ohms) 0.1
Q
100
10
100
Frequency (MHz)
1 Picofarad
10 Picofarad
0.01
1000
100
1000
Frequency (MHz)
100 Picofarad
3.3 Picofarad
10 Picofarad
100 Picofarad
TYPICAL ESR vs. CAPACITANCE
MIL-PRF-55681E - BG
TYPICAL Q vs. CAPACITANCE
MIL-PRF-55681E - BG
1
10000
1000
ESR (ohms) 0.1
Q
100
10
1
10
0.01
1
100
250 MHz
500 MHz
10
100
Capacitance (pF)
Capacitance (pF)
250 MHz
1000 MHz
500 MHz
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
040721
– rf microwave products –
1000 MHz
561
RF/Microwave Multilayer Capacitors (MLC)
Performance Curves
TYPICAL Q vs. FREQUENCY
MIL-PRF-55681E - BG
TYPICAL ESR vs. FREQUENCY
MIL-PRF-55681E - BG
10000
1
1000
Q
ESR (ohms) 0.1
100
10
100
1 Picofarad
10 Picofarad
0.01
1000
Frequency (MHz)
100
1000
Frequency (MHz)
47 Picofarad
330 Picofarad
1 Picofarad
15 Picofarad
100 Picofarad
TYPICAL ESR vs. CAPACITANCE
MIL-PRF-55681E - BG
TYPICAL Q vs. CAPACITANCE
MIL-PRF-55681E - BG
10000
1
1000
Q
ESR (ohms) 0.1
100
10
1
10
0.01
1
100
Capacitance (pF)
250 MHz
562
500 MHz
10
100
Capacitance (pF)
1000 MHz
250 MHz
500 MHz
1000 MHz
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
040721
– rf microwave products –
RF/Microwave Multilayer Capacitors (MLC)
Performance Curves
TYPICAL ESR vs. FREQUENCY
MIL-PRF-55681E - BP
TYPICAL Q vs. FREQUENCY
MIL-PRF-55681E - BP
10000
1000
Q
100
10
100
1000
Frequency (MHz)
1 Picofarad
15 Picofarad
100 Picofarad
TYPICAL ESR vs. CAPACITANCE
MIL-PRF-55681E - BP
TYPICAL Q vs. CAPACITANCE
MIL-PRF-55681E - BP
10000
1
1000
ESR (ohms) 0.1
Q
100
10
1
10
0.01
1
100
Capacitance (pF)
250 MHz
500 MHz
10
100
Capacitance (pF)
1000 MHz
250 MHz
500 MHz
1000 MHz
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
040721
– rf microwave products –
563
RF/Microwave Multilayer Capacitors (MLC)
Performance Curves
564
TYPICAL Q vs. FREQUENCY
MIL-PRF-55681E - BP
TYPICAL ESR vs. FREQUENCY
MIL-PRF-55681E - BP
TYPICAL Q vs. CAPACITANCE
MIL-PRF-55681E - BP
TYPICAL ESR vs. CAPACITANCE
MIL-PRF-55681E - BP
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
040721
– rf microwave products –
RF/Microwave Multilayer Capacitors (MLC)
Performance Curves
TYPICAL RESONANT FREQUENCY vs. CAPACITANCE
(CDR11-14)
CDR 11/12
CDR 13/14
CDR 11/12
CDR 13/14
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
041621
– rf microwave products –
565
RF/Microwave Capacitors
RF/Microwave Multilayer Capacitors (MLC)
Automatic Insertion Packaging
TAPE & REEL:
All tape and reel specifications are in compliance with EIA RS481
(equivalent to IEC 286 part 3).
—13” reel: ≤0.075” thickness = 10,000 pcs
Sizes SQCA through SQCB, CDR11/12 through 13/14.
—8mm carrier
—8mm carrier
—7” reel: 0402 = 10,000 pcs
0603 & 0805 ≤0.40” thickness = 4000 pcs
0805 . 0.040” thickness & 1210 = 2000 pcs
“U” Series - 402/0603/0805/1210 Size Chips
—7” reel: ≤0.040” thickness = 2000 pcs
≤0.075” thickness = 2000 pcs
—13” reel: ≤0.075” thickness = 10,000 pcs
REEL DIMENSIONS: millimeters (inches)
Tape
Size(1)
A
Max.
B*
Min.
C
D*
Min.
N
Min.
W1
8mm
330
(12.992)
1.5
(.059)
13.0±0.20
(.512±.008)
20.2
(.795)
50
(1.969)
8.4 -0.0
(.331 +.060
-0.0 )
12mm
330
(12.992)
1.5
(.059)
13.0±0.20
(.512±.008)
20.2
(.795)
50
(1.969)
12.4 -0.0
(.488 +.076
-0.0 )
+1.0
+2.0
W2
Max.
W3
14.4
(.567)
7.9 Min.
(.311)
10.9 Max.
(.429)
18.4
(.724)
11.9 Min.
(.469)
15.4 Max.
(.607)
Metric dimensions will govern.
English measurements rounded and for reference only.
(1) For tape sizes 16mm and 24mm (used with chip size 3640) consult EIA RS-481 latest revision.
EMBOSSED CARRIER CONFIGURATION
8 & 12 MM TAPE ONLY
CONSTANT DIMENSIONS
Tape Size
8mm and
12mm
D0
+0.10
8.4 -0.0
(.059 +.004
-0.0
E
)
1.75 ± 0.10
(.069 ± .004)
P0
P2
4.0 ± 0.10
(.157 ± .004)
T Max.
T1
G1
G2
0.600
(.024)
0.10
(.004)
Max.
0.75
(.030)
0.75
(.030)
2.0 ± 0.05
(.079 ± .002)
Min. See
Note 3
Min. See
Note 4
VARIABLE DIMENSIONS
F
See Note 6
D1
Min.
See Note 5
8mm
4.55
(.179)
1.0
(.039)
3.5 ± 0.05
(.138 ± .002)
12mm
8.2
(.323)
1.5
(.059)
5.5 ± 0.05
(.217 ± .002)
Tape Size
B1
Max.
R
Min.
T2
W
4.0 ± 0.10
(.157 ± .004)
25
(.984)
2.5 Max
(.098)
8.0 -0.0
(.315 +.012
-.004)
See Note 1
4.0 ± 0.10
(.157 ± .004)
30
(1.181)
6.5 Max
(.256)
12.0 ± .30
(.472 ± .012)
See Note 1
P1
See Note 2
A0B0K0
+0.3
NOTES:
1. A0, B0, and K0 are determined by the max. dimensions to the ends of the terminals
extending from the component body and/or the body dimensions of the component.
The clearance between the end of the terminals or body of the component to the
sides and depth of the cavity (A0, B0, and K0) must be within 0.05 mm (.002) min. and
0.50 mm (.020) max. The clearance allowed must also prevent rotation of the component within the cavity of not more than 20 degrees (see sketches C & D).
2. Tape with components shall pass around radius “R” without damage. The minimum
trailer length (Note 2 Fig. 3) may require additional length to provide R min. for 12mm
embossed tape for reels with hub diameters approaching N min. (Table 4).
3. G1 dimension is the flat area from the edge of the sprocket hole to either the outward
deformation of the carrier tape between the embossed cavities or to the edge of the
cavity whichever is less.
566
4. G2 dimension is the flat area from the edge of the carrier tape opposite the sprocket
holes to either the outward deformation of the carrier tape between the embossed
cavity or to the edge of the cavity whichever is less.
5. The embossment hole location shall be measured from the sprocket hole controlling
the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other.
6. B1 dimension is a reference dimension for tape feeder clearance only.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012419
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “CU” Series, C0G (NP0) Capacitors (RoHS)
GENERAL INFORMATION
“CU” Series capacitors are C0G (NP0) chip capacitors specially designed
for “Ultra” low ESR for applications in the communications market. Sizes
available are EIA chip sizes 01005 and 0201.
LEAD-FREE COMPATIBLE
COMPONENT
DIMENSIONS:
01005
0201
ELECTRICAL CHARACTERISTICS
mm (inches)
Capacitance Value Range:
Size 01005 0.2 to 24pF
Size 0201
0.2 to 24pF
Temperature Coefficient of Capacitance (TC):
Size
L
(Length)
W
(Width)
T
(Max. Thickness)
g
(min.)
A
(Termination Min./Max.)
0402
(01005)
0603
(0201)
0.40±0.02
(0.016±0.0008)
0.60±0.03
(0.024±0.001)
0.20±0.02
0.008±0.0008)
0.30±0.03
(0.012±0.001)
0.22
(0.009)
0.33
(0.013)
0.13
(0.005)
0.15
(0.006)
0.70/0.14
(0.003/0.006)
0.10/0.20
(0.004/0.008)
0±30 ppm/°C (-55° to +125°C)
Insulation Resistance (IR):
1012 Ω min. @ 25°C and rated WVDC
1011 Ω min. @ 125°C and rated WVDC
Working Voltage (WVDC):
Size
Working Voltage
01005 -
16V, 25V (0.2pF-10pF), 16V (10pF-24pF)
0201
25 WVDC
-
HOW TO ORDER
CU01
3
Case Size
Voltage
Code
CU10 = 01005
CU01 = 0201
3 = 25V
Y = 16V
1
Dielectric
1 = 0±30ppm
C0G (NP0)
100
J
A
T
Capacitance
Capacitance
Tolerance
Code
Failure Rate
Code
Termination
EIA Capacitance
Code in pF.
First two digits = significant
figures or “R” for decimal place.
Third digit = number of zeros or
after “R” significant figures.
A = ±0.05pF
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
G = ±2%
J = ±5%
A = Not
Applicable
T = Plated Ni
and Sn
2
Packaging Code
2 = 7” Reel
4 = 13” Reel
U = 7” Reel 4mm TR
(01005)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
110116
– rf microwave products –
A
Special
A = Standard
567
RF/Microwave Capacitors
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “CU” Series, C0G (NP0) Capacitors (RoHS)
CAPACITANCE RANGE
Available Tolerance
Cap (pF)
0.5
0.75
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.2
6.8
8.2
10.0
12.0
15.0
18.0
22.0
24.0
01005
B,C,D
0201
B,C,D
G,J,K
B,C,D
C,D
C,D
D
D
J,K
ULTRA LOW ESR, “CU” SERIES0
01005 6.2pF
0
In. loss
-5
F (GHz)
IL
F1
0.31
-0.40
-9.68
F2
1.28
-5.03
-1.44
-30
F3
2.408
-11.58
-0.27
-35
F4
4.635
-40.55
-0.39
F5
4.897
-31.82
-0.47
-10
-15
dB
-20
R. loss
-25
-40
-45
R. loss
-50
0
2
4
6
8
10
12
Frequency (GHz)
0201 4.7pF
0
In. loss
-5
F (GHz)
IL
R. loss
F1
0.31
-0.13
-12.90
F2
1.28
-2.89
-2.84
-30
F3
2.408
-8.09
-0.60
-35
F4
4.635
-29.45
-0.37
-40
F5
4.897
-38.55
-0.45
R. loss
-10
-15
dB
-20
R. loss
-25
-45
-50
0
2
4
6
8
10
12
Frequency (GHz)
0201 22pF
10
In. loss
dB
0
F (GHz)
IL
-10
F1
0.31
-2.90
-2.85
-20
F2
1.28
-15.26
-0.10
F3
2.408
-45.65
-0.10
F4
4.635
-14.90
-0.87
F5
4.897
-12.89
-1.08
-30
R. loss
-40
-50
0
2
4
6
8
10
12
Frequency (GHz)
568
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
110116
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (RoHS)
GENERAL INFORMATION
“U” Series capacitors are C0G (NP0) chip capacitors specially designed for “Ultra” low ESR for applications in the communications market. Max ESR and
effective capacitance are met on each value producing lot to lot uniformity. Sizes available are EIA chip sizes 0603, 0805, and 1210.
DIMENSIONS: inches (millimeters)
0402
0603
0805
1210
Size
A
B
C
D
E
0402
0.039±0.004 (1.00±0.1)
0.020±0.004 (0.50±0.1)
0.024 (0.6) max
0.010 ± 0.006 (0.25 ± 0.15)
0.014 (0.36) min
0603
0.060±0.010 (1.52±0.25)
0.030±0.010 (0.76±0.25)
0.036 (0.91) max
0.010 ± 0.005 (0.25 ± 0.13)
0.030 (0.76) min
0805
0.079±0.008 (2.01±0.2)
0.049±0.008 (1.25±0.2)
0.045 (1.15mm) max
0.020 ± 0.010 (0.51 ± 0.254)
0.020 (0.51) min
1210
0.126±0.008 (3.2±0.2)
0.098±0.008 (2.49±0.2)
0.055 (1.40mm) max
0.025 ± 0.015 (0.635 ± 0.381)
0.040 (1.02) min
HOW TO ORDER
0805
1
U
100
Dielectric =
Ultra Low
ESR
Case Size
0402
0603
0805
1210
A
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
T
A
Special Code
T= Plated Ni and Sn
Failure Rate
Code
A = Not
Applicable
Capacitance
EIA Capacitance Code in pF.
2
Termination
Capacitance
Tolerance Code
Voltage Code
3 = 25V
5 = 50V
1 = 100V
2 = 200V
J
First two digits = significant figures or “R” for decimal place.
A = Standard
Packaging
Code
2 = 7” Reel
4 = 13” Reel
9 = Bulk
Third digit = number of zeros or
after “R” significant figures.
ELECTRICAL CHARACTERISTICS
LEAD-FREE COMPATIBLE
COMPONENT
Capacitance Values and Tolerances:
Dielectric Working Voltage (DWV):
Size 0402 - 0.2 pF to 22 pF @ 1 MHz
Size 0603 - 1.0 pF to 100 pF @ 1 MHz
Size 0805 - 1.6 pF to 160 pF @ 1 MHz
Size 1210 - 2.4 pF to 1000 pF @ 1 MHz
250% of rated WVDC
Equivalent Series Resistance Typical (ESR):
0402 - See Performance Curve, page 300
0603 - See Performance Curve, page 300
Temperature Coefficient of Capacitance (TC):
0805 - See Performance Curve, page 300
0±30 ppm/°C (-55° to +125°C)
1210 - See Performance Curve, page 300
Insulation Resistance (IR):
1012 Ω min. @ 25°C and rated WVDC
Marking
10 Ω min. @ 125°C and rated WVDC
Laser marking EIA J marking standard (except 0603) (capacitance code
and tolerance upon request).
11
Working Voltage (WVDC):
Size
0402
0603
0805
1210
-
Working Voltage
50, 25 WVDC
200, 100, 50 WVDC
200, 100 WVDC
200, 100 WVDC
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102821
– rf microwave products –
569
RF/Microwave Capacitors
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (RoHS)
CAPACITANCE RANGE
Cap
(pF)
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
Available
Tolerance 0402
50V
B,C
Size
0603 0805
N/A
N/A
1210
N/A
B,C
B,C,D
B,C,D
Cap
(pF)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
Available
Tolerance 0402
B,C,D
50V
B,C,D
B,C,J,K,M
Size
0603 0805
200V 200V
1210
200V
Cap
(pF)
7.5
8.2
9.1
10
11
12
13
15
18
20
22
24
27
30
33
36
39
43
47
51
56
68
75
82
91
Available
Tolerance 0402
B,C,J,K,M 50V
Size
0603 0805
200V 200V
B,C,J,K,M
F,G,J,K,M
200V
100V
50V
N/A
1210
200V
Cap
(pF)
100
110
120
130
140
150
160
180
200
220
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
Available
Tolerance 0402
F,G,J,K,M
N/A
Size
0603 0805
100V 200V
50V
50V
N/A 200V
100V
100V
N/A
200V
100V
F,G,J,K,M
ULTRA LOW ESR, “U” SERIES
ESR Measured on the Boonton 34A
570
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012419
– rf microwave products –
1210
200V
RF/Microwave Capacitors
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (RoHS)
10
TYPICAL
SERIES RESONANT FREQUENCY
“U” SERIES CHIP
Frequency (GHz)
0402
0603
1.0
0.1
1.0
0805
1210
10
100
1000
Capacitance (pF)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012419
– rf microwave products –
571
RF/Microwave Capacitors
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (Sn/Pb)
GENERAL INFORMATION
“U” Series capacitors are C0G (NP0) chip capacitors specially designed for “Ultra” low ESR for applications in the communications market. Max ESR and
effective capacitance are met on each value producing lot to lot uniformity. Sizes available are EIA chip sizes 0603, 0805, and 1210.
DIMENSIONS: inches (millimeters)
0402
0603
0805
1210
Size
A
B
C
D
E
0402
0603
0805
1210
0.039±0.004 (1.00±0.1)
0.060±0.010 (1.52±0.25)
0.079±0.008 (2.01±0.2)
0.126±0.008 (3.2±0.2)
0.020±0.004 (0.50±0.1)
0.030±0.010 (0.76±0.25)
0.049±0.008 (1.25±0.2)
0.098±0.008 (2.49±0.2)
0.024 (0.6) max
0.036 (0.91) max
0.045 (1.15mm) max
0.055 (1.40mm) max
0.010 ± 0.006 (0.25 ± 0.15)
0.010±0.005 (0.25±0.13)
0.020±0.010 (0.51±0.254)
0.025±0.015 (0.635±0.381)
0.014 (0.36) min
0.030 (0.76) min
0.020 (0.51) min
0.040 (1.02) min
HOW TO ORDER
LD05
1
U
100
Dielectric =
Ultra Low
ESR
Case Size
LD02 = 0402
LD03 = 0603
LD05 = 0805
LD10 = 1210
A
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
B
Failure Rate
Code
First two digits = significant figures or “R” for decimal place.
A
Special Code
B = 5% min lead
A = Not
Applicable
Capacitance
EIA Capacitance Code in pF.
2
Termination
Capacitance
Tolerance Code
Voltage Code
3 = 25V
5 = 50V
1 = 100V
2 = 200V
J
A = Standard
Packaging
Code
2 = 7” Reel
4 = 13” Reel
9 = Bulk
Third digit = number of zeros or
after “R” significant figures.
Not RoHS Compliant
ELECTRICAL CHARACTERISTICS
Capacitance Values and Tolerances:
Dielectric Working Voltage (DWV):
Size 0402 - 0.2 pF to 22 pF @ 1 MHz
Size 0603 - 1.0 pF to 100 pF @ 1 MHz
Size 0805 - 1.6 pF to 160 pF @ 1 MHz
Size 1210 - 2.4 pF to 1000 pF @ 1 MHz
250% of rated WVDC
Equivalent Series Resistance Typical (ESR):
040 - See Performance Curve, page 306
0603 - See Performance Curve, page 306
0805 - See Performance Curve, page 306
1210 - See Performance Curve, page 306
Temperature Coefficient of Capacitance (TC):
0±30 ppm/°C (-55° to +125°C)
Insulation Resistance (IR):
Marking:
1012 Ω min. @ 25°C and rated WVDC
1011 Ω min. @ 125°C and rated WVDC
Laser marking EIA J marking standard (except 0603) (capacitance
code and tolerance upon request).
Working Voltage (WVDC):
Size
0402
0603
0805
1210
572
-
Military Specifications
Working Voltage
50, 25 WVDC
200, 100, 50 WVDC
200, 100 WVDC
200, 100 WVDC
Meets or exceeds the requirements of MIL-C-55681
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012521
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (Sn/Pb)
CAPACITANCE RANGE
Cap
(pF)
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
Size
Available
Tolerance LD02 LD03 LD05 LD10
N/A
N/A
N/A
50V
B,C
B,C
B,C,D
B,C,D
Cap
(pF)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
Size
Available
Tolerance LD02 LD03 LD05 LD10
B,C,D
50V 200V 200V 200V
B,C,D
B,C,J,K,M
Cap
(pF)
7.5
8.2
9.1
10
11
12
13
15
18
20
22
24
27
30
33
36
39
43
47
51
56
68
75
82
91
Size
Available
Tolerance LD02 LD03 LD05 LD10
B,C,J,K,M 50V 200V 200V 200V
B,C,J,K,M
F,G,J,K,M
200V
100V
50V
N/A
Size
Cap Available
(pF) Tolerance LD02 LD03 LD05 LD10
F,G,J,K,M
N/A 100V 200V 200V
100
50V
110
50V
120
N/A 200V
130
100V
140
150
100V
160
N/A
180
200
220
270
300
330
360
390
200V
430
100V
470
510
560
620
680
750
820
910
1000 F,G,J,K,M
ULTRA LOW ESR, “U” SERIES
ESR Measured on the Boonton 34A
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012419
– rf microwave products –
573
RF/Microwave Capacitors
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (Sn/Pb)
TYPICAL
SERIES RESONANT FREQUENCY
“U” SERIES CHIP
10
Frequency (GHz)
0402
0603
1.0
0.1
1.0
0805
1210
10
100
Capacitance (pF)
574
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012419
– rf microwave products –
1000
RF/Microwave Capacitors
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (RoHS)
Automotive, AEC Q200 Qualified
GENERAL INFORMATION
DIMENSIONS: inches (millimeters)
Automotive “U” Series capacitors are C0G (NP0) chip capacitors specially
designed for “Ultra” low ESR for applications in the automotive market. Max
ESR and effective capacitance are met on each value producing lot to lot
uniformity. Sizes available are EIA chip sizes 0402 and 0603.
0402
0603
inches (mm)
Size
A
B
0.039±0.004
(1.00±0.1)
0.060±0.010
(1.52±0.25)
0402
0603
0.020±0.004
(0.50±0.1)
0.030±0.010
(0.76±0.25)
C
0.024 max
(0.6)
0.036 max
(0.91)
D
E
N/A
N/A
0.010±0.005
(0.25±0.13)
0.030 min
(0.76)
HOW TO ORDER
0402
1
U
100
J
Dielectric =
Ultra Low
ESR
Case Size
0402
0603
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
T
A
Special Code
T= Plated Ni and Sn
Failure Rate
Code
4 = Automotive
Capacitance
2
Termination
Capacitance
Tolerance Code
Voltage Code
5 = 50V
1 = 100V
2 = 200V
A
EIA Capacitance Code in pF.
First two digits = significant figures or “R” for decimal place.
A = Standard
Packaging
Code
2 = 7” Reel
4 = 13” Reel
9 = Bulk
Third digit = number of zeros or
after “R” significant figures.
ELECTRICAL CHARACTERISTICS
Capacitance Values and Tolerances:
LEAD-FREE COMPATIBLE
COMPONENT
Dielectric Working Voltage (DWV):
Size 0402 - 0.2 pF to 22 pF @ 1 MHz
Size 0603 - 1.0 pF to 100 pF @ 1 MHz
250% of rated WVDC
Temperature Coefficient of Capacitance (TC):
Equivalent Series Resistance Typical (ESR):
0402
-
See Performance Curve, page 303
Insulation Resistance (IR):
0603
-
See Performance Curve, page 303
10 Ω min. @ 25°C and rated WVDC
1011 Ω min. @ 125°C and rated WVDC
Automotive Specifications
0±30 ppm/°C (-55° to +125°C)
12
Working Voltage (WVDC):
Size
Meets or exceeds the requirements of AEC Q200
Working Voltage
0402
- 100, 50, 25 WVDC
0603
- 200, 100, 50 WVDC
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120216
– rf microwave products –
575
RF/Microwave Capacitors
RF/Microwave C0G (NP0) Capacitors
Ultra Low ESR “U” Series, C0G (NP0) Capacitors (RoHS)
Automotive, AEC Q200 Qualified
CAPACITANCE RANGE
Cap
(pF)
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
Size
Available
Tolerance 0402 0603
50V N/A
B,C
B,C
B,C,D
B,C,D
Cap
(pF)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
Size
Available
Tolerance 0402 0603
B,C,D
50V 200V
B,C,D
B,C,J,K,M
Cap
(pF)
7.5
8.2
9.1
10
11
12
13
15
18
20
22
24
27
30
33
36
39
43
47
51
56
68
75
82
91
Size
Available
Tolerance 0402 0603
B,C,J,K,M 50V 200V
B,C,J,K,M
F,G,J,K,M
200V
100V
50V
N/A
Size
Cap Available
(pF) Tolerance 0402 0603
F,G,J,K,M N/A 100V
100
50V
110
50V
120
N/A
130
140
150
160
180
200
220
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000 F,G,J,K,M
ULTRA LOW ESR, “U” SERIES
TYPICAL
SERIES RESONANT FREQUENCY
“U” SERIES CHIP
10
Frequency (GHz)
0402
0603
1.0
0.1
1.0
10
100
1000
Capacitance (pF)
576
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
120216
– rf microwave products –
RF/Microwave Capacitors
RF/Microwave “U” Series Designer Kits
Cap.
Value
PF
0402
0603
Kit 5000 UZ
Kit 4000 UZ
Tolerance
Cap.
Value
pF
Cap.
Value
PF
Tolerance
Tolerance
Cap.
Value
pF
0.5
4.7
1.0
6.8
1.0
5.6
1.2
7.5
1.5
6.8
1.5
8.2
1.8
B (± 0.1pF)
8.2
1.8
10.0
10.0
2.0
12.0
2.4
12.0
2.4
3.0
15.0
2.2
B (±0.1pF)
J (±5%)
2.7
3.6
***25 each of 15 values
B (±0.1pF)
Tolerance
B (±0.1pF)
15.0
18.0
3.0
22.0
3.3
27.0
3.9
33.0
4.7
39.0
5.6
47.0
J (±5%)
***25 each of 24 values
Cap.
Value
PF
0805
1210
Kit 3000 UZ
Kit 3500 UZ
Tolerance
Cap.
Value
pF
Cap.
Value
PF
Tolerance
Tolerance
Cap.
Value
pF
1.0
15.0
2.2
36.0
1.5
18.0
2.7
39.0
2.2
22.0
4.7
2.4
24.0
5.1
2.7
27.0
6.8
56.0
3.0
33.0
8.2
68.0
3.3
B (±0.1pF)
36.0
J (±5%)
47.0
B (±0.1pF)
51.0
9.1
82.0
10.0
100.0
3.9
39.0
4.7
47.0
13.0
120.0
5.6
56.0
15.0
130.0
7.5
68.0
18.0
8.2
82.0
20.0
100.0
24.0
390.0
130.0
27.0
470.0
30.0
680.0
10.0
12.0
J (±5 %)
***25 each of 30 values
Tolerance
J (± 5 % )
J (±5%)
240.0
300.0
***25 each of 30 values
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012419
– rf microwave products –
577
FOLLOW US:
visit us at www.kyocera-avx.com
North America
Tel: +1 864-967-2150
Central America
Tel: +55 11-46881960
Europe
Tel: +44 1276-697000
Asia
Tel: +65 6286-7555
Japan
Tel: +81 740-321250