LD06CA471JAB1A

High Voltage MLC Chips Tin/Lead Termination “B” - 600V to 5000V Applications AVX Corporation will support those customers for commercial and military Multilayer Ceramic Capacitors with a termination consisting of 5% minimum lead. This termination is indicated by the use of a “B” in the 12th position of the AVX Catalog Part Number. This fulfills AVX’s commitment to providing a full range of products to our customers. AVX has provided in the following pages, a full range of values that we are offering in this “B” termination. Larger physical sizes than normally encountered chips are used to make high voltage MLC chip product. Special precautions must be taken in applying these chips in surface mount assemblies. The temperature gradient during heating or cooling cycles should not exceed 4ºC per second. The preheat temperature must be within 50ºC of the peak temperature reached by the ceramic bodies through the soldering process. Chip sizes 1210 and larger should be reflow soldered only. Capacitors may require protective surface coating to prevent external arcing. For 1825, 2225 and 3640 sizes, AVX offers leaded version in either thru-hole or SMT configurations (for details see section on high voltage leaded MLC chips). NEW 630V RANGE HOW TO ORDER LD08 A A 271 AVX Voltage Temperature Style 600V/630V = C Coefficient LD05 - 0805 1000V = A C0G = A LD06 - 1206 1500V = S X7R = C LD10 - 1210 2000V = G LD08 - 1808 2500V = W LD12 - 1812 3000V = H LD13 - 1825 4000V = J LD20 - 2220 5000V = K LD14 - 2225 LD40 - 3640 *** Capacitance Code (2 significant digits + no. of zeros) Examples: 10 pF = 100 100 pF = 101 1,000 pF = 102 22,000 pF = 223 220,000 pF = 224 1 μF =105 K A B 2 Capacitance Test Level Termination* Tolerance A = Standard B = 5% Min Pb C0G: J = ±5% 4 = Automotive* X = FLEXITERM® K = ±10% 5% min. Pb* M = ±20% X7R: K = ±10% M = ±20% Z = +80%, -20% A Packaging Special Code 2 = 7” Reel** 4 = 13” Reel A = Standard Notes: Capacitors with X7R dielectrics are not intended for applications across AC supply mains or AC line filtering with polarity reversal. Contact plant for recommendations. Contact factory for availability of Termination and Tolerance options for Specific Part Numbers. * FLEXITERM is not available in the LD40 Style ** The LD40 Style is not available on 7” Reels. *** AVX offers nonstandard chip sizes. Contact factory for details.. * Not all values are supported in Automotive grade. Please contact factory for availability. DIMENSIONS SIZE MILLIMETERS (INCHES) LD05 (0805) (L) Length (W) Width NOT RoHS Compliant 2.10 ± 0.20 (0.083 ± 0.008) 1.25 ± 0.20 (0.049 ± 0.008) 1.35 (0.053) LD06 (1206) 3.30 ± 0.30 (0.130 ± 0.012) 1.60 ± 0.20 (0.063 ± 0.008) 1.80 (0.071) LD10* (1210) LD08* (1808) LD12* (1812) LD13* (1825) LD20* (2220) LD14* (2225) LD40* (3640) 3.30 ± 0.40 (0.130 ± 0.016) 2.50 ± 0.30 ( 0.098 ± 0.012) 2.80 (0.110) 4.60 ± 0.50 (0.181 ± 0.020) 2.00 ± 0.20 (0.079 ± 0.008) 2.20 (0.087) 4.60 ± 0.50 4.60 ± 0.50 5.70 ± 0.50 5.70 ± 0.50 9.14 ± 0.25 (0.181 ± 0.020) (0.181 ± 0.020) (0.224 ± 0.020) (0.224 ± 0.020) (0.360 ± 0.010) 3.20 ± 0.30 6.30 ± 0.40 5.00 ± 0.40 6.30 ± 0.40 10.2 ± 0.25 (0.126 ± 0.012) (0.248 ± 0.016) (0.197 ± 0.016) (0.248 ± 0.016) (0.400 ± 0.010) 2.80 3.40 3.40 3.40 2.54 (0.110) (0.134) (0.134) (0.134) (0.100) (T) Thickness Max. (t) min. 0.50 ± 0.20 0.60 ± 0.20 0.75 ± 0.35 0.75 ± 0.35 0.75 ± 0.35 0.75 ± 0.35 0.85 ± 0.35 0.85 ± 0.35 terminal max. (0.020 ± 0.008) (0.024 ± 0.008) (0.030 ± 0.014) (0.030 ± 0.014) (0.030 ± 0.014) (0.030 ± 0.014) (0.033 ± 0.014) (0.033 ± 0.014) 0.76 (0.030) 1.52 (0.060) *Reflow Soldering Only Performance of ceramic capacitors can be simulated by using the online SpiMLCC software program - http://spicat.avx.com/mlcc Custom values, ratings and configurations are also available. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 082621 99 High Voltage MLC Chips Tin/Lead Termination “B” - 600V to 5000V Applications NP0 (C0G) Dielectric Performance Characteristics 10 pF to 0.047 μF (25°C, 1.0 ±0.2 Vrms at 1kHz, for ≤ 1000 pF use 1 MHz) ±5%, ±10%, ±20% 0.1% max. (+25°C, 1.0 ±0.2 Vrms, 1kHz, for ≤ 1000 pF use 1 MHz) -55°C to +125°C 0 ±30 ppm/°C (0 VDC) 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 VDC (+125°C) 100K MΩ min. or 1000 MΩ - μF min., whichever is less 10K MΩ min. or 100 MΩ - μF min., whichever is less Minimum 120% rated voltage for 5 seconds at 50 mA max. current Capacitance Range Capacitance Tolerances Dissipation Factor Operating Temperature Range Temperature Characteristic Voltage Ratings Insulation Resistance (+25°C, at 500 VDC) Insulation Resistance (+125°C, at 500 VDC) Dielectric Strength HIGH VOLTAGE C0G CAPACITANCE VALUES VOLTAGE LD05 (0805) LD06 (1206) LD10 (1210) LD08 (1808) LD12 (1812) LD13 (1825) LD20 (2220) LD14 (2225) LD40 (3640) min. 10 pF 10 pF 100 pF 100 pF 100 pF 1000 pF 1000 pF 1000 pF 1000 pF 600/630 330 pF 1200 pF 2700 pF 3300 pF 5600 pF 0.012 μF 0.012 pF 0.018 μF 0.047 μF max. min. 10 pF 10 pF 10 pF 100 pF 100 pF 100 pF 1000 pF 1000 pF 1000 pF 1000 180 pF 560 pF 1500 pF 2200 pF 3300 pF 8200 pF 0.010 pF 0.010 μF 0.022 μF max. min. – 10 pF 10 pF 10 pF 10 pF 100 pF 100 pF 100 pF 100 pF 1500 – 270 pF 680 pF 820 pF 1800 pF 4700 pF 4700 pF 5600 pF 0.010 μF max. min. – 10 pF 10 pF 10 pF 10 pF 100 pF 100 pF 100 pF 100 pF 2000 – 120 pF 270 pF 330 pF 1000 pF 1800 pF 2200 pF 2700 pF 6800 pF max. min. – – – 10 pF 10 pF 10 pF 100 pF 100 pF 100 pF 2500 – – – 180 pF 470 pF 1200 pF 1500 pF 1800 pF 3900 pF max. min. – – – 10 pF 10 pF 10 pF 10 pF 10 pF 100 pF 3000 – – – 120 pF 330 pF 820 pF 1000 pF 1200 pF 2700 pF max. min. – – – 10 pF 10 pF 10 pF 10 pF 10 pF 100 pF 4000 – – – 47 pF 150 pF 330 pF 470 pF 560 pF 1200 pF max. min. – – – – – – 10 pF 10 pF 10 pF 5000 – – – – – – 220 pF 270 pF 820 pF max. X7R Dielectric Performance Characteristics Capacitance Range Capacitance Tolerances Dissipation Factor Operating Temperature Range Temperature Characteristic Voltage Ratings Insulation Resistance (+25°C, at 500 VDC) Insulation Resistance (+125°C, at 500 VDC) Dielectric Strength 10 pF to 0.56 μF (25°C, 1.0 ±0.2 Vrms at 1kHz) ±10%; ±20%; +80%, -20% 2.5% max. (+25°C, 1.0 ±0.2 Vrms, 1kHz) -55°C to +125°C ±15% (0 VDC) 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 VDC (+125°C) 100K MΩ min. or 1000 MΩ - μF min., whichever is less 10K MΩ min. or 100 MΩ - μF min., whichever is less Minimum 120% rated voltage for 5 seconds at 50 mA max. current HIGH VOLTAGE X7R MAXIMUM CAPACITANCE VALUES VOLTAGE min. 600/630 max. min. 1000 max. min. 1500 max. min. 2000 max. min. 2500 max. min. 3000 max. min. 4000 max. min. 5000 max. 100 0805 1206 1210 1808 1812 1825 2220 2225 3640 100 pF 6800 pF 100 pF 1500 pF – – – – – – – – – – – – 1000 pF 0.022 μF 100 pF 6800 pF 100 pF 2700 pF 10 pF 1500 pF – – – – – – – – 1000 pF 0.056 μF 1000 pF 0.015 μF 100 pF 5600 pF 100 pF 3300 pF – – – – – – – – 1000 pF 0.068 μF 1000 pF 0.018 μF 100 pF 6800 pF 100 pF 3300 pF 10 pF 2200 pF 10 pF 1800 pF – – – – 1000 pF 0.120 μF 1000 pF 0.039 μF 100 pF 0.015 μF 100 pF 8200 pF 10 pF 5600 pF 10 pF 3900 pF – – – – 0.010 μF 0.390 μF 1000 pF 0.100 μF 1000 pF 0.056 μF 100 pF 0.022 μF 100 pF 0.015 μF 100 pF 0.010 μF – – – – 0.010 μF 0.270 μF 1000 pF 0.120 μF 1000 pF 0.056 μF 1000 pF 0.027 μF 100 pF 0.018 μF 100 pF 0.012 μF – – – – 0.010 μF 0.330 μF 1000 pF 0.150 μF 1000 pF 0.068 μF 1000 pF 0.033 μF 100 pF 0.022 μF 100 pF 0.015 μF – – – – 0.010 μF 0.560 μF 0.010 μF 0.220 μF 1000 pF 0.100 μF 1000 pF 0.027 μF 1000 pF 0.022 μF 1000 pF 0.018 μF 100 pF 6800 pF 100 pF 3300 pF The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 040919