SMD Power Inductors
103020-1
IMPORTANT INFORMATION/DISCLAIMER
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet or
made available on the website are subject to change. The customer is responsible for checking and verifying
the extent to which the Information contained in this publication is applicable to an order at the time the order is
placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee,
warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KYOCERA AVX knowledge of typical operating
conditions for such applications, but are not intended to constitute and KYOCERA AVX specifically disclaims
any warranty concerning suitability for a specific customer application or use.
ANY USE OF PRODUCT OUTSIDE OF SPECIFICATIONS OR ANY STORAGE OR INSTALLATION
INCONSISTENT WITH PRODUCT GUIDANCE VOIDS ANY WARRANTY.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by KYOCERA AVX with reference to the use of KYOCERA AVX products is given without
regard, and KYOCERA AVX assumes no obligation or liability for the advice given or results obtained.
Although KYOCERA AVX designs and manufactures its products to the most stringent quality and safety
standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer
applications which require a high degree of reliability or safety should employ suitable designs or other
safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an
electrical component does not result in a risk of personal injury or property damage.
Unless specifically agreed to in writing, KYOCERA AVX has not tested or certified its products, services or
deliverables for use in high risk applications including medical life support, medical device, direct physical
patient contact, water treatment, nuclear facilities, weapon systems, mass and air transportation control,
flammable environments, or any other potentially life critical uses. Customer understands and agrees that
KYOCERA AVX makes no assurances that the products, services or deliverables are suitable for any highrisk uses. Under no circumstances does KYOCERA AVX warrant or guarantee suitability for any customer
design or manufacturing process.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume
that all safety measures are indicted or that other measures may not be required.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
121319
– smd power inductors –
SMD Power Inductor
Table of Contents
LMax SMD Power Inductor
LMXS Series – Shielded Style P............ 37
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMXN Series – Non-Shielded Style B..... 1
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMax SMD Miniature Power Inductor
LMMN Series – Miniature Style M........... 41
LMXN Series – Non-Shielded Style C..... 3
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMXN Series – Non-Shielded Style D..... 7
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMax Low Profile Power Inductor
LMLP Series – Style C.............................. 49
LMax SMD Shielded Power Inductor
LMXS Series – Shielded Style B............ 11
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMLP Series – Style D.............................. 57
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMXS Series – Shielded Style C............ 15
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMXS Series – Shielded Style D............ 19
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMXS Series – Shielded Style F............. 22
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMXS Series – Shielded Style G............ 26
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMXS Series – Shielded Style H............ 28
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMXS Series – Shielded Style J............. 31
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMXS Series – Shielded Style L............. 33
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
LMXS Series – Shielded Style M............ 35
Inductance Range: 0.47 - 470 μH
Rated Current: 0.53 - 30 A
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– smd power inductors –
LMax SMD Power Inductor
LMXN Series – Non-Shielded Style B
FEATURES
CHARACTERISTICS
•
•
•
•
•
•
• Saturation Rated Current:The current when the inductance
becomes 30% lower than its initial value. (Ta=25°C)
• Operating temperature range: -40 ~ 85°C
Miniature surface mount design
High power, High saturation inductors
Very low resistance
Maximum power density
Ideal inductors for DC–DC converters
Available on tape and reel for auto surface mounting
INDUCTANCE AND RATED
CURRENT RANGES
•
•
•
•
•
•
APPLICATIONS
•
•
•
•
•
Notebook Computers
Handheld Communications
LCD Televisions
Power Supply For VTRs
DC/DC Converters, etc.
0705 0.47μH ~ 22.0μH
7.7 ~ 0.70A
0906 0.56μH ~ 100μH
7.7 ~ 0.53A
1310 0.47μH ~ 100μH
11.4 ~ 0.95A
1913 0.47μH ~ 100μH
25.1 ~ 1.80A
2216 0.78μH ~ 470μH
30.0 ~ 0.8A
Electrical specifications at 25°C
DIMENSIONS
A
I
J
I
C
100
4R7
E
B
PAD
LAYOUT
D
H
mm (inches)
Type
0705
0906
1310
1913
2216
A max.
7.50
(0.295)
8.89
(0.350)
13.20
(0.560)
19.40
(0.764)
22.35
(0.880)
B max.
5.20
(0.205)
6.40
(0.252)
9.90
(0.390)
13.30
(0.524)
16.26
(0.604)
C max.
3.20
(0.126)
5.00
(0.197)
6.35
(0.250)
6.80
(0.268)
8.00
(0.315)
D
4.60
(0.181)
5.84
(0.230)
9.50
(0.374)
12.7
(0.500)
16.0
(0.630)
E
2.50
(0.098)
2.60
(0.103)
4.50
(0.177)
6.60
(0.260)
8.00
(0.315)
H
4.00
(0.157)
4.06
(0.160)
6.50
(0.256)
8.00
(0.315)
8.64
(0.340)
I
2.00
(0.079)
2.00
(0.079)
2.30
(0.091)
3.80
(0.150)
4.30
(0.169)
J
4.00
(0.157)
5.08
(0.200)
9.00
(0.344)
11.7
(0.460)
14.35
(0.565)
HOW TO ORDER
LM
Family
LM = Power Inductor
XN
Series
XN = Non-Shielded
0705
Size
0705 = 7x5xh
(h = see catalog)
M
Tolerance
M = ±20%
P = +40%
–20%
R04
B
T
Inductance
Style
Termination
R04 = 0.039μH
R39 = 0.390μH
3R9 = 3.900μH
390 = 39.00μH
391 = 390.0μH
392 = 3900μH
T = Sn Plate
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
A
S
Special
Packaging
A = Standard
S = 13" Reel
1
LMax SMD Power Inductor
LMXN Series – Non-Shielded Style B
ELECTRICAL CHARACTERISTICS
0705/0906/1310/1913/2216
Codes
L
(μH)
705
R47
R56
R78
1R0
1R5
2R2
3R3
3R9
4R7
6R0
6R8
7R8
100
150
220
330
470
680
101
221
331
471
0.47
0.56
0.78
1.0
1.5
2.2
3.3
3.9
4.7
6.0
6.8
7.8
10
15
22
33
47
68
100
220
330
470
P
–
–
M
M
M
M
–
M
–
M
–
M
M
M
–
–
–
–
–
–
–
Tolerance
0906
1310
2216
1913
–
P
M
–
M
–
–
P
M
P
M
M
M
M
M
–
M
M
M
–
M
M
M
–
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
–
M
–
M
–
DCR (Ω) max.
I sat (A) max*
Test
Condition
0705
0906
1310
1913
2216
0705
0906
1310
1913
2216
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
0.025
–
–
0.050
0.050
0.070
0.080
–
0.090
–
0.130
–
0.160
0.230
0.370
–
–
–
–
–
–
–
–
0.010
–
–
–
0.035
0.040
–
0.054
–
0.08
–
0.111
0.170
0.250
0.350
0.470
0.730
1.110
–
–
–
0.005
–
–
0.006
0.008
0.011
0.014
–
0.018
–
0.027
–
0.038
0.045
0.070
0.100
0.150
0.220
0.280
–
–
–
0.003
–
–
0.004
0.006
0.008
0.009
–
0.012
–
0.019
–
0.027
0.032
0.050
0.069
0.109
0.156
0.206
–
–
–
–
–
0.003
–
0.004
0.006
0.009
0.010
0.014
0.017
–
0.018
0.026
0.032
0.043
0.066
0.096
0.115
0.165
0.396
0.588
0.950
7.7
–
–
2.9
2.6
2.3
2
–
1.5
–
1.2
–
1.1
0.9
0.7
–
–
–
–
–
–
–
–
7.7
–
–
–
3.5
3
–
2.6
–
2.2
–
1.9
1.5
1.2
0.99
0.87
0.68
0.53
–
–
–
11.4
–
–
9.9
7.9
6.1
5.1
–
4.2
–
3.6
–
3.3
2.4
2
1.7
1.4
1.2
0.95
–
–
–
25.1
–
–
15.3
12
10.2
9.3
–
7.7
–
6.2
–
5.2
4.3
3.7
3
2.4
2
1.8
–
–
–
–
–
30
–
25
20
17
15
13
12
–
11
10
8
7
6
5
4
3
2.4
1
0.8
*Saturation Current:The current when the inductance becomes 30% lower than its initial value. (Ta=25°C)
2
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Power Inductor
LMXN Series – Non-Shielded Style C
FEATURES
CHARACTERISTICS
• High power, High saturation inductors
• Ideal inductors for DC-DC converters in notebook
computers, PDAs, Step-up or step-down converters, flash
memory programmers, etc.
• 0705 has ceramic base with gold-plating
• Others have LCP plastic base
• Saturation Rated Current: The current when the inductance becomes
10% lower than its initial value. (Ta=25°C)
• Operating temperature range: -40 ~ 125°C
INDUCTANCE AND RATED
CURRENT RANGES
•
•
•
•
•
•
APPLICATIONS
•
•
•
•
Portable Telephones
Personal Computers
DC/DC Converters
Various Electronic Appliances
0705 1.0μH ~ 1000μH
2.9 ~ 0.10A
1309 4.7μH ~ 1000μH
4.2 ~ 0.29A
13E9 1.0μH ~ 1000μH
9.0 ~ 0.30A
13L9 0.47μH ~ 1000μH 40 ~ 0.8A
1915 1.0μH ~ 1000μH
20 ~ 1.0A
Electrical specifications at 25°C
DIMENSIONS
A
4R7
C
B
EPOXY
D
E
J
F
I
H
mm (inches)
Type
0705
1309
13E9
13L9
1915
A max.
6.60
(0.260)
12.95
(0.510)
12.95
(0.510)
12.95
(0.510)
18.54
(0.730)
B max.
4.45
(0.175)
9.40
(0.370)
9.40
(0.370)
9.40
(0.370)
15.24
(0.600)
C max.
2.92
(0.115)
3.00
(0.118)
5.21
(0.205)
11.43
(0.450)
7.11
(0.280)
D
4.32
(0.170)
7.62
(0.300)
7.62
(0.300)
7.62
(0.300)
12.7
(0.500)
E
1.27
(0.050)
2.54
(0.100)
2.54
(0.100)
2.54
(0.100)
2.54
(0.100)
F
1.02
(0.040)
2.54
(0.100)
2.54
(0.100)
2.54
(0.100)
2.54
(0.100)
H
3.56
(0.140)
2.79
(0.110)
2.79
(0.110)
2.79
(0.110)
2.79
(0.110)
M
R04
C
T
Inductance
Style
Termination
I
1.40
(0.055)
2.92
(0.115)
2.92
(0.115)
2.92
(0.115)
2.92
(0.115)
J
4.06
(0.160)
7.37
(0.290)
7.37
(0.290)
7.37
(0.290)
12.45
(0.490)
HOW TO ORDER
LM
Family
LM = Power Inductor
XN
Series
XN = Non-Shielded
1309
Size
1309 = 13x9xh
13E9 = 13x9xE(h)
(h = see catalog)
Tolerance
M = ±20%
N = ±30%
R04 = 0.039μH
R39 = 0.390μH
3R9 = 3.900μH
390 = 39.00μH
391 = 390.0μH
392 = 3900μH
T = Sn Plate
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
A
S
Special
Packaging
A = Standard
S = 13" Reel
3
LMax SMD Power Inductor
LMXN Series – Non-Shielded Style C
ELECTRICAL CHARACTERISTICS
0705
Codes
1R0
1R5
2R2
3R3
4R7
6R8
8R2
100
150
220
330
470
680
101
151
221
331
471
681
102
L (μH)
1.0
1.5
2.2
3.3
4.7
6.8
8.2
10
15
22
33
47
68
100
150
220
330
470
680
1000
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
DCR (Ω) max.
0.05
0.06
0.07
0.08
0.09
0.13
0.16
0.16
0.23
0.37
0.51
0.64
0.86
1.27
2.00
3.11
3.80
5.06
9.20
13.8
I sat (A) max*
2.90
2.60
2.30
2.00
1.50
1.20
1.15
1.10
0.90
0.70
0.58
0.50
0.40
0.31
0.27
0.22
0.18
0.16
0.14
0.10
Codes
4R7
6R8
100
150
220
330
470
680
101
151
221
331
471
681
102
L (μH)
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
DCR (Ω) max.
0.036
0.060
0.085
0.12
0.18
0.25
0.32
0.54
0.69
0.94
1.60
2.15
3.30
4.40
7.00
I sat (A) max*
4.20
3.90
2.70
2.30
1.80
1.60
1.30
1.10
0.87
0.74
0.56
0.50
0.40
0.33
0.29
10309
*Saturation Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25°C)
4
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Power Inductor
LMXN Series – Non-Shielded Style C
13E9
Codes
1R0
1R5
2R2
3R3
4R7
6R8
100
150
220
330
470
680
101
151
221
331
471
681
102
L (μH)
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
DCR (Ω) max.
0.009
0.010
0.012
0.015
0.018
0.027
0.038
0.046
0.085
0.100
0.140
0.200
0.280
0.400
0.610
1.020
1.270
2.020
3.000
I sat (A) max*
9.00
8.00
7.00
6.40
5.40
4.60
3.80
3.00
2.60
2.00
1.60
1.40
1.20
1.00
0.80
0.60
0.50
0.40
0.30
Codes
R47
R82
1R2
1R5
2R2
3R5
4R7
5R6
6R8
8R2
100
150
220
330
470
680
101
151
221
331
471
681
102
L (μH)
0.47
0.82
1.2
1.5
2.2
3.5
4.7
5.6
6.8
8.2
10
15
22
33
47
68
100
150
220
330
470
680
1000
Tolerance
N
N
N
N
N
N
N
N
N
N
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
DCR (Ω) max.
0.008
0.009
0.010
0.010
0.012
0.015
0.020
0.022
0.030
0.033
0.040
0.050
0.066
0.080
0.11
0.17
0.22
0.34
0.44
0.70
0.95
1.20
2.00
I sat (A) max*
40.0
34.7
28.4
25.7
23.0
21.0
18.0
16.0
15.0
10.0
8.00
7.00
5.50
4.00
3.80
3.00
2.50
2.00
1.60
1.20
1.00
1.00
0.80
13L9
*Saturation Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25°C)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
5
LMax SMD Power Inductor
LMXN Series – Non-Shielded Style C
1915
Codes
1R0
2R2
3R3
5R6
100
150
220
330
470
680
101
151
221
331
471
681
102
L (μH)
1.0
2.2
3.3
5.6
10
15
22
33
47
68
100
150
220
330
470
680
1000
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
DCR (Ω) max.
0.009
0.014
0.018
0.020
0.031
0.036
0.047
0.066
0.095
0.130
0.190
0.250
0.380
0.560
0.850
1.100
1.800
*Saturation Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25°C)
6
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
I sat (A) max*
20
16
14
12
10
8.0
7.0
5.5
4.5
3.5
3.0
2.6
2.4
1.9
1.4
1.2
1.0
LMax SMD Power Inductor
LMXN Series – Non-Shielded Style D
FEATURES
CHARACTERISTICS
• Open Magnetic Circuit Construction
• Small Surface Area
• Rated Current (IDC): The DC current that will cause an
approximate ΔT of 40°C. (Ta=25°C)
• Operating temperature range: -40°C ~ +125°C
APPLICATIONS
•
•
•
•
INDUCTANCE AND RATED
CURRENT RANGES
LCD Televisions
Notebooks
Portable Communication
DC/DC Converters, etc.
•
•
•
•
•
•
•
0504 1.0μH ~ 33 μH
3.30 ~ 0.56A
0605 10.0μH ~ 220 μH
1.44 ~ 0.35A
0808 10.0μH ~ 330 μH
1.44 ~ 0.28A
08G8 10.0μH ~ 470 μH
2.30 ~ 0.34A
1009 10.0μH ~ 560 μH
2.38 ~ 0.32A
10F9 10.0μH ~ 820 μH
2.6 ~ 0.24A
Electrical specifications at 25°C
DIMENSIONS
SILVER
A
G
F
Land
D
C
E
R1.0
Part of
Silk Scrren
B
mm (inches)
Type
0504
0605
0808
08G8
1009
10F9
A
4.50 ± 0.30
(0.177 ± .012)
5.80 ± 0.30
(0.228 ± .012)
7.80 ± 0.30
(0.307 ± .012)
7.80 ± 0.30
(0.307 ± .012)
10.0 ± 0.30
(0.394 ± .012)
10.0 ± 0.40
(0.394 ± .016)
B
4.00 ± 0.30
(0.158 ± 0.012)
5.20 ± 0.30
(0.205 ± 0.012)
7.30 ± 0.30
(0.276 ± 0.012)
7.30 ± 0.30
(0.287 ± 0.012)
9.00 ± 0.30
(0.354 ± 0.012)
9.00 ± 0.40
(0.354 ± 0.016)
C
3.20 ± 0.30
(0.126 ± 0.012)
4.50 ± 0.35
(0.177 ± 0.014)
3.50 ± 0.50
(0.140 ± 0.020)
5.08 ± 0.50
(0.200 ± 0.020)
4.00 ± 0.50
(0.158 ± 0.020)
5.40 ± 0.40
(0.213 ± 0.016)
D
5.00
(0.197)
6.00
(0.236)
8.00
(0.315)
8.00
(0.315)
10.0
(0.394)
10.0
(0.394)
E
1.50
(0.059)
1.70
(0.067)
2.00
(0.079)
2.00
(0.079)
2.50
(0.098)
2.50
(0.098)
F
1.75
(0.069)
2.15
(0.085)
3.00
(0.118)
3.00
(0.118)
3.75
(0.148)
3.75
(0.148)
G
4.50
(0.177)
5.50
(0.217)
7.50
(0.295)
7.50
(0.295)
9.50
(0.374)
9.50
(0.374)
HOW TO ORDER
LM
Family
LM = Power Inductor
XN
Series
XN = Non-Shielded
1009
Size
1009 = 10x9xh
10F9 = 10x9xF(h)
(h = see catalog)
M
Tolerance
M = ±20%
R04
D
T
Inductance
Style
Termination
1R0 = 1.00μH
390 = 39.00μH
391 = 390.0μH
T = Sn Plate
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
A
S
Special
Packaging
A = Standard
S = 13" Reel
7
LMax SMD Power Inductor
LMXN Series – Non-Shielded Style D
ELECTRICAL CHARACTERISTICS
0504
Codes
1R0
1R4
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
8R2
100
120
150
180
220
270
330
L (μH)
1.0
1.4
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.048
0.056
0.063
0.071
0.078
0.086
0.093
0.108
0.125
0.131
0.146
0.182
0.210
0.235
0.338
0.378
0.522
0.540
IDC (A) max.
3.30
2.80
2.45
2.21
2.00
1.81
1.66
1.51
1.40
1.26
1.14
1.04
0.97
0.85
0.74
0.68
0.62
0.56
Codes
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
L (μH)
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.100
0.120
0.140
0.150
0.180
0.200
0.230
0.320
0.370
0.420
0.460
0.600
0.700
0.930
1.100
1.380
1.570
IDC (A) max.
1.44
1.40
1.30
1.23
1.11
0.97
0.88
0.80
0.72
0.68
0.61
0.58
0.52
0.48
0.40
0.38
0.35
0605
8
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Power Inductor
LMXN Series – Non-Shielded Style D
0808
Codes
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
L (μH)
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
1.44
1.39
1.24
1.12
1.07
0.94
0.85
0.74
0.68
0.64
0.59
0.54
0.51
0.49
0.40
0.36
0.31
0.29
0.28
IDC (A) max.
0.081
0.089
0.104
0.111
0.129
0.153
0.170
0.217
0.252
0.282
0.332
0.406
0.481
0.536
0.755
1.022
1.200
1.306
1.495
Codes
100
120
150
180
220
270
330
470
560
680
820
101
121
151
221
331
391
471
L (μH)
10
12
15
18
22
27
33
47
56
68
82
100
120
150
220
330
390
470
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.070
0.080
0.090
0.100
0.110
0.120
0.130
0.180
0.240
0.280
0.370
0.430
0.470
0.640
0.960
1.260
1.770
1.960
IDC (A) max.
2.30
2.00
1.80
1.60
1.50
1.30
1.20
1.00
0.94
0.85
0.78
0.72
0.66
0.58
0.49
0.40
0.36
0.34
08G8
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
9
LMax SMD Power Inductor
LMXN Series – Non-Shielded Style D
1009
Codes
100
120
150
180
220
330
470
560
680
820
101
121
181
221
331
471
561
L (μH)
10
12
15
18
22
33
47
56
68
82
100
120
180
220
330
470
560
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.053
0.061
0.070
0.081
0.088
0.120
0.170
0.199
0.223
0.252
0.344
0.396
0.621
0.721
1.100
1.526
1.904
IDC (A) max.
2.38
2.13
1.87
1.73
1.60
1.26
1.10
1.01
0.91
0.85
0.74
0.69
0.56
0.53
0.42
0.35
0.32
Codes
100
120
150
220
330
390
470
560
680
820
101
121
151
221
271
331
471
561
821
L (μH)
10
12
15
22
33
39
47
56
68
82
100
120
150
220
270
330
470
560
820
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.060
0.070
0.080
0.100
0.120
0.140
0.170
0.190
0.220
0.250
0.350
0.400
0.470
0.730
0.970
1.150
1.480
1.900
2.550
IDC (A) max.
2.60
2.45
2.27
1.95
1.50
1.37
1.28
1.17
1.11
1.00
0.97
0.89
0.78
0.66
0.57
0.52
0.42
0.33
0.24
10F9
10
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Shielded Power Inductor
LMXS Series – Shielded Style B
FEATURES
CHARACTERISTICS
• Directly connected electrode on ferrite core
• Excellent property with high saturation for surface mounting
• Rated DC Current: The current when the inductance becomes 30%
lower than its initial value.
• Operating temperature: -40 ~ 85°C
APPLICATIONS
•
•
•
•
•
•
INDUCTANCE AND RATED CURRENT RANGES
OA Equipment
Notebook PCs
LCD Monitor
Portable Terminal Equipment
DC/DC Converters, etc.
Power Supply for VTR
•
•
•
•
•
•
•
DIMENSIONS
04B4 0.47 ~ 2200μH
1.84 ~ 0.035A
04C4 1.0 ~ 6800μH
1.90 ~ 0.017A
04A4 1.0 ~ 100μH
1.50 ~ 0.100A
0505 0.47 ~ 820μH
2.33 ~ 0.030A
05C5 0.47 ~ 2500μH
4.82 ~ 0.045A
0606 1.0 ~ 3300μH
4.70 ~ 0.026A
Electrical specifications at 25°C
C
A
J
D
E
K
G
B
H
mm (inches)
Type
04B4
04C4
04A4
0505
05C5
0606
A
3.85 ± 0.30
(0.152 ± 0.012)
3.85 ± 0.30
(0.152 ± 0.012)
3.85 ± 0.30
(0.152 ± 0.012)
5.30 max.
(0.207 max.)
5.30 max.
(0.207 max.)
5.90 ± 0.20
(0.232 ± 0.008)
B
3.85 ± 0.30
(0.152 ± 0.012)
3.85 ± 0.30
(0.152 ± 0.012)
3.85 ± 0.30
(0.152 ± 0.012)
5.30 max.
(0.207 max.)
5.30 max.
(0.207 max.)
5.90 ± 0.20
(0.232 ± 0.008)
C max.
2.00
(0.079)
3.00
(0.118)
1.50
(0.059)
2.00
(0.079)
3.00
(0.118)
3.00
(0.118)
D
3.9 ± 0.20
(0.154 ± 0.008)
3.9 ± 0.20
(0.154 ± 0.008)
4.80 max.
(0.189 max.)
5.7 ± 0.40
(0.224 ± 0.016)
5.7 ± 0.40
(0.224 ± 0.016)
6.4 ± 0.30
(0.252 ± 0.012)
E
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
2.40
(0.094)
G
3.20
(0.126)
3.20
(0.126)
3.00
(0.118)
4.20
(0.165)
4.20
(0.165)
4.70
(0.185)
H
1.90
(0.075)
1.90
(0.075)
2.00
(0.079)
1.90
(0.075)
1.90
(0.075)
2.70
(0.106)
K
3.00
(0.118)
3.00
(0.118)
2.60
(0.102)
3.90
(0.154)
3.90
(0.154)
4.40
(0.173)
J
4.55
(0.179)
4.55
(0.179)
5.20
(0.205)
5.70
(0.224)
5.70
(0.224)
6.50
(0.256)
HOW TO ORDER
LM
Family
LM = Power Inductor
XS
Series
XS = Shielded
0505
M
Size
Tolerance
0505 = 5x5xh
05A5 = 5x5xA(h)
(h = see catalog)
M = ±20%
N = ±30%
P = ±40%
R04
B
T
Inductance
Style
Termination
R04 = 0.039μH
R39 = 0.390μH
3R9 = 3.900μH
390 = 39.00μH
391 = 390.0μH
392 = 3900μH
T = Sn Plate
A
S
Special
Packaging
A = Standard
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
S = 13" Reel
11
LMax SMD Power Inductor
LMXS Series – Shielded Style B
ELECTRICAL CHARACTERISTICS
04B4/04C4
Codes
L (μH)
Tolerance
R47
1R0
1R2
1R5
1R8
2R0
2R2
2R4
2R5
2R7
3R3
3R5
3R9
4R7
5R6
6R2
6R8
8R2
100
120
150
180
220
270
330
390
470
500
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
0.47
1.0
1.2
1.5
1.8
2.0
2.2
2.4
2.5
2.7
3.3
3.5
3.9
4.7
5.6
6.2
6.8
8.2
10
12
15
18
22
27
33
39
47
50
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test
Condition
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
100 KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
DCR (Ω) max.
04B4
04C4
0.017
–
0.030
0.009
0.043
0.010
0.052
0.013
0.056
–
0.057
0.016
0.058
0.025
0.059
–
0.059
0.018
0.060
0.020
0.064
0.030
0.127
0.025
–
0.033
0.146
0.039
0.176
0.044
0.220
–
0.238
0.051
0.272
0.065
0.299
0.092
–
0.100
0.472
0.113
0.552
0.125
0.592
0.146
0.630
0.176
1.075
0.214
1.269
0.225
1.309
0.304
–
–
1.960
0.324
2.613
0.472
2.950
0.539
3.255
0.608
3.350
0.757
3.550
0.882
4.000
1.130
4.900
1.269
–
1.570
7.280
1.930
–
2.360
–
2.770
–
3.520
13.37
4.250
–
4.830
19.55
6.260
–
7.860
36.15
9.980
I sat (A) max*
04B4
04C4
1.84
–
1.80
1.90
1.70
1.75
1.60
1.45
1.55
–
1.51
1.25
1.50
1.15
1.41
–
1.40
1.05
1.35
1.00
1.30
0.96
1.30
0.95
–
0.87
1.10
0.78
0.95
0.74
0.91
–
0.90
0.68
0.80
0.57
0.70
0.43
–
0.38
0.61
0.33
0.58
0.30
0.52
0.28
0.44
0.26
0.43
0.23
0.37
0.21
0.34
0.19
–
–
0.29
0.170
0.25
0.156
0.20
0.142
0.19
0.128
0.15
0.116
0.12
0.106
0.10
0.095
0.09
0.087
–
0.080
0.08
0.078
–
0.073
–
0.068
–
0.065
0.07
0.056
–
0.050
0.065
0.047
–
0.043
0.038
0.039
*Saturation Current: The current when the inductance becomes 30% lower than its initial value.
12
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Power Inductor
LMXS Series – Shielded Style B
04A4
Codes
1R0
1R2
2R2
3R3
3R9
4R7
5R6
6R8
8R2
100
150
220
330
470
680
101
L (μH)
1.0
1.2
2.2
3.3
3.9
4.7
5.6
6.8
8.2
10
15
22
33
47
68
100
Tolerance
N
N
N
N
N
N
N
N
N
N
N
M
M
M
M
M
Test Condition
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
DCR (Ω) max.
0.058
0.070
0.082
0.105
0.120
0.150
0.180
0.220
0.240
0.255
0.390
0.610
0.920
1.130
1.520
2.120
I sat (A) max*
1.50
1.40
1.00
0.92
0.80
0.76
0.69
0.62
0.56
0.50
0.40
0.32
0.28
0.20
0.15
0.10
*Saturation Current: The current when the inductance becomes 30% lower than its initial value.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
13
LMax SMD Power Inductor
LMXS Series – Shielded Style B
0505/05C5/0606
Codes
L
(μH)
Tolerance
Test
Condition
R47
1R0
1R1
1R2
1R5
1R8
2R0
2R2
2R4
2R7
3R3
3R9
4R1
4R7
5R6
6R8
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
252
272
332
0.47
1.0
1.1
1.2
1.5
1.8
2.0
2.2
2.4
2.7
3.3
3.9
4.1
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1522
1800
2200
2500
2700
3300
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
0505
0.015
0.024
–
0.044
–
–
0.046
0.059
0.062
–
0.073
0.081
0.087
–
–
0.105
0.139
0.150
–
0.210
–
0.275
0.452
0.455
–
0.730
–
0.935
1.300
1.500
1.910
2.680
3.040
3.520
4.380
5.560
–
7.820
–
–
15.00
–
–
–
–
–
–
–
–
DCR (Ω) max.
05C5
0.010
0.015
0.020
0.022
–
–
0.027
0.029
0.034
–
0.040
–
0.045
0.052
–
0.068
0.084
0.090
0.120
0.142
0.192
0.208
0.222
0.257
0.320
0.352
0.459
0.525
0.770
0.801
0.850
1.100
1.190
1.530
–
2.030
3.000
3.500
4.080
–
–
–
8.500
10.00
13.15
19.00
20.00
–
–
0606
–
0.014
–
0.016
0.018
0.019
0.022
0.022
0.024
0.027
0.030
0.034
–
0.042
0.048
0.054
0.058
0.065
0.082
0.096
0.110
0.140
0.170
0.210
0.240
0.280
0.340
0.410
0.490
0.550
0.700
0.780
0.960
1.080
1.360
1.820
2.050
2.580
3.160
4.040
4.900
6.000
7.600
9.440
11.70
13.40
–
17.30
22.10
0505
2.33
2.27
–
2.15
–
–
1.90
1.63
1.50
–
1.34
1.20
1.14
–
–
0.95
0.90
0.76
–
0.63
–
0.56
0.48
0.44
–
0.35
–
0.30
0.27
0.23
0.22
0.21
0.20
0.195
0.193
0.190
–
0.180
–
–
0.120
–
–
–
–
–
–
–
–
*Saturation Current: The current when the inductance becomes 30% lower than its initial value.
14
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
I sat (A) max*
05C5
4.82
4.00
3.87
3.80
–
–
2.92
2.41
2.36
–
1.95
–
1.87
1.60
–
1.51
1.38
1.33
1.06
1.05
0.90
0.86
0.75
0.72
0.64
0.62
0.53
0.51
0.48
0.43
0.34
0.26
0.24
0.20
–
0.19
0.16
0.15
0.14
–
–
–
0.070
0.065
0.062
0.050
0.045
0606
–
4.70
–
3.90
3.52
3.25
2.95
2.95
2.75
2.55
2.45
2.35
–
2.25
2.05
1.85
1.65
1.45
1.35
1.25
1.15
0.98
0.90
0.80
0.72
0.70
0.66
0.58
0.52
0.46
0.42
0.36
0.34
0.32
0.28
0.24
0.22
0.20
0.18
0.16
0.14
0.13
0.12
0.10
0.098
0.095
–
0.086
0.078
LMax SMD Power Inductor
LMXS Series – Shielded Style C
FEATURES
CHARACTERISTICS
•
•
•
•
•
• Rated Current:
0404/04B4/0505/05B5/05C5/0707/07B7/07D7: The DC current
when the inductance becomes 30% lower than its initial value.
04C4/101B/101D/101H: The DC current when the inductance
becomes 35% lowers than its initial value. (Ta=25°C)
• Operating temperature range: -40 ~ +105°C
Directly connected electrode on ferrite core
Available in magnetically shielded
Low DC resistance
Suitable for large current
Available on tape and reel for auto surface mounting
APPLICATIONS
•
•
•
•
•
INDUCTANCE AND RATED CURRENT RANGES
Power Supply For VTRs
OA Equipment.
Notebook PCs
Portable Communication Equipment
DC/DC Converters, etc.
•
•
•
•
•
•
•
•
•
•
DIMENSIONS
C
A
B
A
B
D
C
0404 1.0 ~ 180μH
1.60 ~ 0.110A
04B4 0.47 ~ 1800μH
1.84 ~ 0.036A
04C4 1.5 ~ 560μH
1.90 ~ 0.090A
0505 1.2 ~ 1000μH
1.77 ~ 0.067A
05B5 1.0 ~ 820μH
2.70 ~ 0.026A
05C5 1.0 ~ 2500μH
4.00 ~ 0.045A
0707 1.0 ~ 820μH
3.28 ~ 0.100A
07B7 H 1.0 ~ 1500μH
3.52
~ 0.095A
øC
07D7 0.36 ~ 1000μH
9.24 ~ 0.180A
Electrical
specifications at 25°C
PCB
Pattern
K
J
H
øC
PCB
Pattern
D
K
J
mm (inches)
Type
0404
04B4
04C4
0505
05B5
05C5
0707
07B7
07D7
A
3.80 ± 0.30
(0.150 ± 0.012)
3.80 ± 0.30
(0.150 ± 0.012)
3.80 ± 0.30
(0.150 ± 0.012)
5.00 ± 0.30
(0.197 ± 0.012)
5.00 ± 0.30
(0.197 ± 0.012)
5.00 ± 0.30
(0.197 ± 0.012)
6.90 ± 0.30
(0.272 ± 0.012)
6.90 ± 0.30
(0.272 ± 0.012)
7.00 ± 0.40
(0.276 ± 0.016)
B
3.80 ± 0.30
(0.150 ± 0.012)
3.80 ± 0.30
(0.150 ± 0.012)
3.80 ± 0.30
(0.150 ± 0.012)
5.00 ± 0.30
(0.197 ± 0.012)
5.00 ± 0.30
(0.197 ± 0.012)
5.00 ± 0.30
(0.197 ± 0.012)
6.90 ± 0.30
(0.272 ± 0.012)
6.90 ± 0.30
(0.272 ± 0.012)
7.00 ± 0.40
(0.276 ± 0.016)
C max.
1.25
(0.049)
2.00
(0.079)
3.00
(0.118)
1.20
(0.047)
2.00
(0.079)
3.00
(0.118)
1.50
(0.059)
1.90
(0.075)
4.30
(0.169)
D
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.50
(0.098)
2.50
(0.098)
1.80
(0.071)
H
4.40
(0.173)
4.40
(0.173)
4.40
(0.173)
5.90
(0.232)
5.90
(0.232)
5.90
(0.232)
7.30
(0.287)
7.30
(0.287)
8.00
(0.315)
J
4.40
(0.173)
4.40
(0.173)
4.40
(0.173)
5.90
(0.232)
5.90
(0.232)
5.90
(0.232)
7.30
(0.287)
7.30
(0.287)
8.00
(0.315)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
K
1.10
(0.043)
1.10
(0.043)
1.10
(0.043)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
2.00
(0.079)
2.00
(0.079)
1.60
(0.063)
øC
3.00
(0.118)
3.00
(0.118)
3.00
(0.118)
4.20
(0.165)
4.20
(0.165)
4.20
(0.165)
5.30
(0.209)
5.30
(0.209)
6.00
(0.236)
15
LMax SMD Power Inductor
LMXS Series – Shielded Style C
HOW TO ORDER
LM
Family
LM = Power Inductor
XS
Series
XS = Shielded
0707
M
Size
Tolerance
0707 = 7x7xh
07D7 = 7x7xD(h)
(h = see catalog)
M = ±20%
N = ±30%
R04
C
T
Inductance
Style
Termination
R04 = 0.039μH
R39 = 0.390μH
3R9 = 3.900μH
390 = 39.00μH
391 = 390.0μH
392 = 3900μH
T = Sn Plate
A
S
Special
Packaging
A = Standard
S = 13" Reel
ELECTRICAL CHARACTERISTICS
0404/04B4/04C4
Codes
R47
1R0
1R2
1R5
1R8
2R2
2R4
2R5
2R7
3R3
3R5
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
471
561
681
102
152
182
L
(μH)
0.47
1.0
1.2
1.5
1.8
2.2
2.4
2.5
2.7
3.3
3.5
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
470
560
680
1000
1500
1800
Tolerance
N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test
Condition
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
0404
–
0.060
0.065
0.077
0.093
0.125
0.139
–
–
0.187
0.210
–
0.220
–
0.240
–
0.320
–
0.350
–
0.470
0.570
0.750
0.810
1.060
1.150
1.670
1.840
2.310
2.630
2.860
3.940
4.900
5.740
7.310
9.080
9.500
–
–
–
–
–
–
–
–
–
DCR (Ω) max.
04B4
0.017
0.030
0.043
0.052
–
0.058
–
0.059
0.059
0.064
0.127
–
0.135
–
0.146
–
0.176
0.220
0.238
–
0.272
0.299
–
0.472
–
0.592
0.630
1.075
–
1.309
–
2.613
2.950
3.255
–
3.550
–
4.900
–
7.280
–
–
13.370
19.550
36.150
57.620
04C4
–
–
–
0.015
0.018
0.020
0.022
–
0.028
0.032
–
0.035
0.037
0.043
0.045
0.046
–
–
0.065
0.079
0.071
0.105
0.119
0.140
0.175
0.201
0.227
0.287
0.341
0.430
0.471
0.532
0.675
0.850
1.110
1.230
1.560
1.800
2.200
2.640
3.820
4.620
–
–
–
–
0404
–
1.600
1.400
1.240
1.220
1.200
0.980
–
–
0.890
0.850
–
0.780
–
0.710
–
0.620
–
0.570
–
0.520
0.470
0.430
0.380
0.350
0.320
0.290
0.280
0.250
0.220
0.200
0.180
0.160
0.140
0.130
0.120
0.110
–
–
–
–
–
–
–
–
–
*Saturation Current (0404/04B4): The DC current when the inductance becomes 30% lower than its initial value. (Ta=25°C)
*Saturation Current (04C4): The DC current when the inductance becomes 35% lowers than its initial value. (Ta=25°C)
16
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
I sat (A) max*
04B4
1.840
1.800
1.700
1.600
–
1.500
–
1.400
1.400
1.300
1.300
–
1.120
–
1.100
–
0.950
0.910
0.900
–
0.800
0.700
–
0.610
–
0.520
0.440
0.430
–
0.340
–
0.250
0.200
0.190
–
0.120
–
0.090
–
0.080
–
–
0.070
0.065
0.038
0.036
04C4
–
–
–
1.900
1.760
1.670
1.650
–
1.450
1.440
–
1.430
1.320
1.000
0.970
0.940
–
–
0.870
0.820
0.770
0.700
0.670
0.540
0.500
0.480
0.400
0.350
0.330
0.320
0.300
0.270
0.230
0.210
0.200
0.170
0.150
0.140
0.130
0.120
0.100
0.090
–
–
–
–
LMax SMD Power Inductor
LMXS Series – Shielded Style C
0505/05B5/05C5
Codes
L (μH)
Tolerance
Test Condition
1R0
1R1
1R2
1R5
2R0
2R2
3R3
3R5
4R1
4R7
5R6
6R2
6R8
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
252
1.0
1.1
1.2
1.5
2.0
2.2
3.3
3.5
4.1
4.7
5.6
6.2
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2500
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
0505
–
–
0.050
0.069
0.100
0.110
0.140
0.150
–
0.190
0.193
0.200
0.200
0.300
0.350
0.430
0.440
0.750
0.820
–
1.160
–
1.590
–
2.140
2.720
3.550
4.890
5.200
7.550
7.760
10.13
11.23
–
16.86
22.78
24.87
28.09
45.07
–
–
–
–
–
DCR (Ω) max.
05B5
0.030
–
0.044
–
0.046
0.059
0.062
0.073
0.081
0.087
0.093
–
0.105
0.139
0.150
0.170
0.210
–
0.275
–
0.455
0.540
0.730
0.800
0.935
–
1.500
1.910
2.680
3.045
3.520
4.380
5.560
–
7.820
9.790
–
15.00
–
–
–
–
–
–
05C5
0.015
0.020
0.022
–
0.027
0.029
0.034
–
–
0.045
0.052
–
0.068
0.084
0.090
–
0.142
–
0.208
0.222
0.257
–
0.352
–
0.525
–
0.801
0.850
1.100
1.190
1.530
–
2.030
3.000
3.500
4.450
–
–
–
8.500
10.00
13.15
19.00
20.00
0505
–
–
1.770
1.710
1.440
1.400
1.140
1.100
–
0.950
0.900
0.840
0.800
0.750
0.660
0.620
0.590
0.570
0.560
–
0.430
–
0.340
–
0.290
0.250
0.220
0.200
0.190
0.170
0.150
0.145
0.140
–
0.098
0.097
0.085
0.077
0.067
–
–
–
–
–
I sat (A) max*
05B5
2.700
–
2.150
–
1.900
1.630
1.500
1.340
1.200
1.140
1.000
–
0.950
0.900
0.760
0.660
0.630
–
0.560
–
0.440
0.380
0.350
0.320
0.300
–
0.230
0.220
0.210
0.200
0.195
0.193
0.190
–
0.180
0.170
–
0.120
–
–
–
–
–
–
05C5
4.000
3.870
3.800
–
2.920
2.410
2.360
–
–
1.870
1.600
–
1.510
1.380
1.330
–
1.050
–
0.860
0.750
0.720
–
0.620
–
0.510
–
0.430
0.340
0.260
0.240
0.200
–
0.190
0.160
0.150
0.140
–
–
–
0.070
0.065
0.062
0.050
0.045
*Saturation Current (0505/05B5/05C5): The DC current when the inductance becomes 30% lower than its initial value.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
17
LMax SMD Power Inductor
LMXS Series – Shielded Style C
0707/07B7/07D7
Codes
L (μH)
Tolerance
Test Condition
R36
R56
R80
1R0
1R2
1R5
1R8
2R0
2R2
2R5
2R7
3R0
3R3
3R9
4R3
4R7
5R6
6R8
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
0.36
0.56
0.80
1.0
1.2
1.5
1.8
2.0
2.2
2.5
2.7
3.0
3.3
3.9
4.3
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
N
N
N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M, N
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
1KHz, 0.25V
0707
–
–
–
0.050
–
0.067
–
0.085
–
–
0.110
–
0.130
0.160
–
0.200
0.230
0.280
0.310
0.330
0.460
0.530
0.620
0.700
0.910
1.150
1.380
1.540
1.860
2.320
2.540
3.20
4.24
4.77
6.04
7.95
10.51
11.63
12.97
16.87
22.3
25.11
28.41
–
–
–
DCR (Ω) max.
07B7
–
–
–
0.035
–
–
0.052
–
0.071
–
–
0.086
–
0.110
–
0.130
0.150
0.170
0.190
0.240
0.290
0.380
0.440
0.490
0.640
0.740
0.910
1.020
1.260
1.570
1.890
2.12
2.55
3.37
3.73
4.54
5.97
7.74
9.92
12.95
14.36
18.52
20.23
28.25
31.85
36.72
07D7
0.005
0.006
0.009
0.040
0.040
0.040
0.040
–
0.0410
0.0410
–
–
0.0410
–
0.041
0.042
0.043
0.044
–
0.049
0.058
0.081
0.091
0.110
0.150
0.170
0.230
0.260
0.350
0.380
0.430
0.61
0.66
0.88
0.98
1.17
1.64
1.86
2.85
3.01
3.62
4.63
5.20
6.00
–
–
0707
–
–
–
3.280
–
2.530
–
2.060
–
–
1.870
–
1.580
1.460
–
1.300
1.220
1.160
1.130
1.030
0.870
0.800
0.730
0.710
0.650
0.570
0.500
0.480
0.450
0.410
0.370
0.32
0.29
0.27
0.24
0.22
0.19
0.18
0.16
0.15
0.13
0.12
0.10
–
–
–
I sat (A) max*
07B7
–
–
–
3.520
–
–
3.050
–
2.500
–
–
2.150
–
2.010
–
1.950
1.820
1.670
1.520
1.390
1.220
1.090
1.030
0.950
0.840
0.800
0.750
0.690
0.630
0.560
0.510
0.47
0.42
0.37
0.32
0.29
0.25
0.23
0.21
0.18
0.16
0.14
0.13
0.11
0.10
0.095
*Saturation Current (0707/07B7/07D7): The DC current when the inductance becomes 30% lower than its initial value.
18
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
07D7
9.240
8.500
5.800
2.100
2.100
2.100
2.090
–
2.080
2.080
–
–
2.070
–
2.060
2.050
2.040
2.040
–
2.000
1.900
1.600
1.480
1.320
1.260
1.100
1.050
1.000
0.850
0.780
0.740
0.70
0.60
0.52
0.46
0.40
0.36
0.32
0.28
0.26
0.24
0.22
0.20
0.18
–
–
LMax SMD Power Inductor
LMXS Series – Shielded Style D
FEATURES
CHARACTERISTICS
• Magnetically shielded against radiation
• 0704 can help achieve longer battery life significantly in
handheld communication devices.
• 1309 / 1915 designed for the higher current
requirements of portable computers.
• 0704 hasceramic base with gold–plating
• 1309 / 1915 has LCP plastic base
• Saturation Rated Current (IDC): The DC current when the inductance
becomes 10% lower than its initial value. (Ta=25°C)
• Temperature Rise Current (I rms): The actual current when temperature
of coil becomes Δ40°C. (Ta=25°C)
• Operating temperature range: -40 ~ 85°C
INDUCTANCE AND RATED
CURRENT RANGES
APPLICATIONS
•
•
•
•
•
•
•
•
Portable Telephones
Personal Computers
Other Various Electronic Appliances
DC/DC Converters, etc.
0704 1.0 ~ 10000μH
3.0 ~ 0.02A
1309 1.0 ~ 1000μH
5.0 ~ 0.17A
1915 10 ~ 1000μH
3.9 ~ 0.53A
Electrical specifications at 25°C
DIMENSIONS
EPOXY
680
F
D
I
E
J
H
mm (inches)
Type
0704
1309
1915
A max.
6.60
(0.260)
12.95
(0.510)
18.54
(0.730)
B max.
4.45
(0.175)
9.40
(0.370)
15.24
(0.600)
C max.
2.92
(0.115)
5.21
(0.205)
7.62
(0.300)
D
4.32
(0.170)
7.62
(0.300)
12.70
(0.500)
E
1.27
(0.050)
2.54
(0.100)
2.54
(0.100)
F
1.02
(0.040)
2.54
(0.100)
2.54
(0.100)
H
3.56
(0.140)
2.79
(0.110)
2.79
(0.110)
I
1.40
(0.055)
2.92
(0.115)
2.92
(0.115)
J
4.06
(0.160)
7.37
(0.290)
12.45
(0.490)
HOW TO ORDER
LM
Family
LM = Power Inductor
XS
Series
XS = Shielded
0704
M
Size
Tolerance
0704 = 7x4xh
1309 = 13x9xh
(h = see catalog)
M = ±20%
R04
D
T
Inductance
Style
Termination
R04 = 0.039μH
R39 = 0.390μH
3R9 = 3.900μH
390 = 39.00μH
391 = 390.0μH
392 = 3900μH
T = Sn Plate
A
S
Special
Packaging
A = Standard
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
S = 13" Reel
19
LMax SMD Power Inductor
LMXS Series – Shielded Style D
ELECTRICAL CHARACTERISTICS
0704
Codes
L
(μH)
Tolerance
1R0
1R5
2R2
3R3
4R7
6R8
100
150
220
330
470
680
101
151
221
331
471
681
102
152
222
332
472
682
103
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
L
Q
100KHz, 0.1V
200KHz, 0.1V
100KHz, 0.1V
200KHz, 0.1V
100KHz, 0.1V
200KHz, 0.1V
100KHz, 0.1V
200KHz, 0.1V
100KHz, 0.1V
200KHz, 0.1V
100KHz, 0.1V
200KHz, 0.1V
100KHz, 0.1V
200KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
DCR
(Ω) max.
0.040
0.045
0.050
0.055
0.060
0.065
0.075
0.090
0.11
0.19
0.23
0.29
0.48
0.59
0.90
1.40
1.80
2.20
3.40
4.20
8.50
11.0
13.9
25.0
32.8
SRF ref
(MHz)
Q min.
I rms
(A) max.
250
125
120
120
105
50
38
33
25
20
20
15
10
9
6
5
4
3
2
2
2
1
1
1
0.8
30
30
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
3.00
2.30
1.80
1.60
1.40
1.20
1.00
0.80
0.70
0.60
0.50
0.40
0.30
0.26
0.22
0.20
0.19
0.18
0.15
0.12
0.10
0.08
0.06
0.04
0.02
1309
20
Codes
L
(μH)
Tolerance
Test
Condition
1R0
1R5
2R2
3R3
4R7
6R8
100
150
220
330
470
680
101
151
221
102
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
1000
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
DCR
(Ω) max.
0.021
0.022
0.032
0.039
0.054
0.075
0.101
0.150
0.207
0.334
0.472
0.660
1.110
1.550
2.000
8.300
SRF ref
(MHz)
IDC
(A) max
I rms
(A) max.
140
120
80
70
40
38
35
25
19
15
13
10
7
6
5
2
5.6
5.2
5.0
3.9
3.2
2.8
2.4
2.0
1.6
1.4
1.0
0.9
0.8
0.6
0.5
0.32
5.0
4.5
3.8
3.3
2.7
2.2
2.0
1.5
1.3
1.1
0.8
0.7
0.6
0.5
0.37
0.17
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Power Inductor
LMXS Series – Shielded Style D
1915
Codes
L
(μH)
Tolerance
Test
Condition
100
150
220
330
470
680
101
151
221
331
471
681
102
10
15
22
33
47
68
100
150
220
330
470
680
1000
M
M
M
M
M
M
M
M
M
M
M
M
M
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
DCR
(Ω) max.
0.040
0.048
0.059
0.075
0.097
0.138
0.207
0.293
0.470
0.780
1.080
1.400
2.010
SRF ref
(MHz)
30
20
18
14
10
9.0
7.0
6.0
5.0
4.0
3.0
2.5
2.0
IDC
(A) max.
8.0
7.00
6.00
5.00
4.00
3.00
2.40
2.10
1.90
1.10
1.10
0.96
0.80
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
I rms
(A) max.
3.9
3.4
3.1
2.8
2.4
2.0
1.7
1.3
1.1
0.86
0.73
0.64
0.53
21
LMax SMD Power Inductor
LMXS Series – Shielded Style F
FEATURES
INDUCTANCE AND RATED CURRENT RANGES
• Magnetically Shielded Construction
• Large Current
• Low DCR
•
•
•
•
•
•
•
•
•
•
APPLICATIONS
•
•
•
•
•
Telephones
PCs
Notebooks
Hard Disk Drives
Peripherals
CHARACTERISTICS
• Rated Current (IDC): The DC current that will cause an
approximate ΔT of 40°C. (Ta=25°C)
• Operating temperature range: -40°C ~ +125°C
0606 4.7μH ~ 100.0μH
1.50 ~ 0.33A
06C6 4.7μH ~ 100.0μH
1.60 ~ 0.42A
0707 3.3μH ~ 47.0μH
1.60 ~ 0.54A
07C7 3.3μH ~ 1000.0μH 1.90 ~ 0.13A
07E7 3.3μH ~ 1000.0μH 2.30 ~ 0.14A
1010 10.0μH ~ 1500.0μH 2.50 ~ 0.22A
1313 6.0μH ~ 1500.0μH 3.60 ~ 0.29A
131H 2.0μH ~ 220.0μH
6.20 ~ 1.00A
131J 1.2μH ~ 220.0μH
8.20 ~ 1.30A
Electrical specifications at 25°C
DIMENSIONS
C
A
D
G
H
4R7
I
E
B
F
EPOXY
H
0.1 typ.
mm (inches)
Type
0606
06C6
0707
07C7
07E7
1010
1313
131H
131J
A
6.00 ± 0.20
(0.236 ± 0.008)
6.00 ± 0.20
(0.236 ± 0.008)
7.00 ± 0.20
(0.276 ± 0.008)
7.00 ± 0.20
(0.276 ± 0.008)
7.00 ± 0.20
(0.276 ± 0.008)
10.1 ± 0.30
(0.398 ± 0.012)
12.5 ± 0.30
(0.492 ± 0.012)
12.5 ± 0.30
(0.492 ± 0.012)
12.5 ± 0.30
(0.492 ± 0.012)
B
6.00 ± 0.20
(0.236 ± 0.008)
6.00 ± 0.20
(0.236 ± 0.008)
7.00 ± 0.20
(0.276 ± 0.008)
7.00 ± 0.20
(0.276 ± 0.008)
7.00 ± 0.20
(0.276 ± 0.008)
10.1 ± 0.30
(0.398 ± 0.012)
12.5 ± 0.30
(0.492 ± 0.012)
12.5 ± 0.30
(0.492 ± 0.012)
12.5 ± 0.30
(0.492 ± 0.012)
C
2.50 ± 0.20
(0.099 ± 0.008)
2.80 ± 0.20
(0.110 ± 0.008)
2.80 ± 0.20
(0.110 ± 0.008)
3.20 ± 0.20
(0.126 ± 0.008)
4.50 ± 0.30
(0.177 ± 0.012)
4.50 ± 0.30
(0.177 ± 0.012)
5.50 ± 0.30
(0.217 ± 0.012)
6.50 ± 0.35
(0.256 ± 0.014)
7.50 ± 0.35
(0.295 ± 0.014)
D
2.00 ± 0.10
(0.079 ± 0.004)
2.00 ± 0.10
(0.079 ± 0.004)
2.00 ± 0.10
(0.079 ± 0.004)
2.00 ± 0.10
(0.079 ± 0.004)
2.00 ± 0.10
(0.079 ± 0.004)
3.00 ± 0.10
0.118 ± 0.004)
3.00 ± 0.10
0.118 ± 0.004)
3.00 ± 0.10
0.118 ± 0.004)
3.00 ± 0.10
0.118 ± 0.004)
E
3.00 typ
(0.118 typ)
3.00 typ
0.118 typ)
4.00 typ
(0.193 typ)
4.00 typ
(0.193 typ)
4.00 typ
(0.193 typ)
6.00 ± 0.20
(0.236 ± 0.008)
8.60 ± 0.30
0.339 ± 0.012)
8.60 ± 0.30
0.339 ± 0.012)
8.60 ± 0.30
0.339 ± 0.012)
F
1.50 typ
(0.059 typ)
1.50 typ
(0.059 typ)
1.50 typ
(0.059 typ)
1.50 typ
(0.059 typ)
1.50 typ
(0.059 typ)
2.00 ± 0.15
(0.079 ± 0.006)
2.00 ± 0.15
(0.079 ± 0.006)
2.00 ± 0.15
(0.079 ± 0.006)
2.00 ± 0.15
(0.079 ± 0.006)
G
2.20
(0.087)
2.20
(0.087)
2.20
(0.087)
2.20
(0.087)
2.20
(0.087)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
HOW TO ORDER
LM
Family
LM = Power Inductor
22
XS
Series
XS = Shielded
0707
M
Size
Tolerance
0707 = 7x7xh
07C7 = 7x7xC(h)
(h = see catalog)
M = ±20%
2R2
F
T
Inductance
Style
Termination
2R2 = 2.20μH
680 = 68.0μH
152 = 1500μH
T = Sn Plate
A
S
Special
Packaging
A = Standard
S = 13" Reel
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
H
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.50
(0.099)
2.50
(0.099)
2.50
(0.099)
2.50
(0.099)
I
2.60
(0.103)
2.60
(0.103)
3.60
(0.103)
3.60
(0.142)
3.60
(0.142)
5.60
(0.220)
8.20
(0.322)
8.20
(0.322)
8.20
(0.322)
LMax SMD Power Inductor
LMXS Series – Shielded Style F
ELECTRICAL CHARACTERISTICS
0606
Codes
4R7
6R8
100
150
220
330
470
680
101
L (μH)
4.7
6.8
10
15
22
33
47
68
100
Tolerance
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.050
0.080
0.098
0.140
0.208
0.310
0.390
0.540
0.810
IDC (A) max.
1.50
1.30
1.00
0.88
0.73
0.59
0.48
0.42
0.33
Codes
4R7
6R8
100
150
220
330
470
680
101
L (μH)
4.7
6.8
10
15
22
33
47
68
100
Tolerance
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.050
0.073
0.098
0.128
0.172
0.290
0.420
0.533
0.730
IDC (A) max.
1.60
1.50
1.30
1.00
0.77
0.69
0.59
0.50
0.42
Codes
3R3
4R7
6R8
100
150
220
330
470
L (μH)
3.3
4.7
6.8
10
15
22
33
47
Tolerance
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.045
0.054
0.071
0.100
0.156
0.220
0.290
0.410
IDC (A) max.
1.60
1.50
1.30
1.10
0.88
0.75
0.65
0.54
Codes
3R3
4R7
6R8
100
150
220
330
470
680
101
151
221
331
471
681
102
L(μH)
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
TestCondition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR(Ω)max.
0.028
0.044
0.050
0.064
0.090
0.132
0.192
0.290
0.372
0.540
0.780
1.260
2.000
2.460
3.780
5.740
IDC(A)max.
1.90
1.70
1.60
1.40
1.10
0.96
0.75
0.67
0.59
0.45
0.37
0.29
0.22
0.20
0.16
0.13
06C6
0707
07C7
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
23
LMax SMD Power Inductor
LMXS Series – Shielded Style F
07E7
Codes
3R3
4R7
6R8
100
150
220
330
470
680
101
151
221
331
471
681
102
L (μH)
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.024
0.036
0.047
0.045
0.063
0.075
0.120
0.150
0.210
0.300
0.410
0.624
0.890
1.260
1.780
2.740
IDC (A) max.
2.30
2.00
1.70
1.30
1.10
0.90
0.82
0.75
0.60
0.50
0.40
0.33
0.25
0.22
0.20
0.14
Codes
100
150
220
330
470
680
101
151
221
331
471
681
102
152
L (μH)
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.044
0.057
0.071
0.100
0.120
0.170
0.240
0.420
0.570
0.820
1.240
1.920
3.360
4.080
IDC (A) max.
2.50
2.20
1.90
1.60
1.40
1.20
1.00
0.79
0.65
0.54
0.47
0.38
0.29
0.22
Codes
6R0
100
150
220
330
470
680
101
151
221
331
471
681
102
152
L (μH)
6
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
DCR (Ω) max.
0.020
0.026
0.032
0.041
0.050
0.075
0.100
0.140
0.230
0.330
0.500
0.630
0.920
1.350
2.080
IDC (A) max.
3.60
3.40
2.80
2.30
1.90
1.60
1.30
1.10
0.88
0.72
0.59
0.49
0.43
0.34
0.29
1010
1313
24
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Power Inductor
LMXS Series – Shielded Style F
131H
Codes
2R0
4R2
7R0
100
150
220
330
470
680
101
221
L (μH)
2.0
4.2
7.0
10
15
22
33
47
68
100
220
Tolerance
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
DCR (Ω) max.
0.014
0.018
0.022
0.025
0.029
0.038
0.049
0.070
0.095
0.150
0.330
IDC (A) max.
6.20
5.50
5.00
4.80
4.20
3.50
2.80
2.40
2.00
1.60
1.00
131J
Codes
1R2
2R7
3R9
5R6
6R8
100
150
220
330
470
680
101
151
221
L (μH)
1.2
2.7
3.9
5.6
6.8
10
15
22
33
47
68
100
150
220
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
100KHz,1.0V
DCR (Ω) max.
0.009
0.012
0.013
0.014
0.016
0.019
0.022
0.032
0.048
0.064
0.094
0.150
0.210
0.310
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
IDC (A) max.
8.20
7.00
6.70
6.30
5.90
5.40
4.70
4.00
3.20
2.70
2.00
1.90
1.50
1.30
25
LMax SMD Power Inductor
LMXS Series – Shielded Style G
FEATURES
CHARACTERISTICS
• Magnetically Shielded Construction
• Large Current
• Low DCR
• Rated Current (IDC): The DC current that will cause an approximate ΔT
of 40°C. (Ta=25°C)
• Operating temperature range: -40°C ~ +125°C
APPLICATIONS
INDUCTANCE AND RATED CURRENT RANGES
•
•
•
•
• 0707 10μH ~ 1000μH
1.68 ~ 0.16A
• 07D7 10μH ~ 1000μH
1.84 ~ 0.18A
• Electrical specifications at 25°C
LCD Televisions
Notebooks
Handheld Communication
DC/DC Converters, etc.
DIMENSIONS
D
H
A Max
F
I
C Max
G
J
E
B Max
Solder Mask
K
Type
0707
07D7
A max.
7.50
(0.295)
7.50
(0.295)
B max.
7.50
(0.295)
7.50
(0.295)
C max.
3.50
(0.138)
4.50
(0.177)
D
2.00
(0.079)
2.00
(0.079)
E
1.10
(0.043)
1.10
(0.043)
F
5.08
(0.200)
5.08
(0.200)
G
6.30
(0.248)
6.30
(0.248)
H
3.00
(0.118)
3.00
(0.118)
R04
G
T
Inductance
Style
Termination
I
1.91
(0.075)
1.91
(0.075)
mm (inches)
J
4.50
(0.177)
4.50
(0.177)
K
10.5
(0.413)
10.5
(0.413)
HOW TO ORDER
LM
Family
LM = Power Inductor
26
XS
Series
XS = Shielded
0707
M
Size
Tolerance
0707 = 7x7xh
07C7 = 7x7xC(h)
(h = see catalog)
M = ±20%
3R9 = 3.900μH
390 = 39.00μH
391 = 390μH
102 = 1000μH
T = Sn Plate
A
S
Special
Packaging
A = Standard
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
S = 13" Reel
LMax SMD Power Inductor
LMXS Series – Shielded Style G
ELECTRICAL CHARACTERISTICS
0707
Codes
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
L (μH)
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.072
0.098
0.130
0.140
0.190
0.210
0.240
0.320
0.360
0.470
0.520
0.690
0.790
0.890
1.270
1.450
1.650
2.310
2.620
2.940
4.180
4.670
5.730
6.540
9.440
IDC (A) max.
1.68
1.52
1.33
1.20
1.07
0.96
0.91
0.77
0.76
0.68
0.61
0.57
0.50
0.49
0.43
0.39
0.35
0.32
0.28
0.26
0.24
0.22
0.19
0.18
0.16
Codes
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
561
681
821
102
L (μH)
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
560
680
820
1000
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.060
0.070
0.081
0.091
0.110
0.150
0.170
0.230
0.260
0.350
0.380
0.430
0.610
0.660
0.880
0.980
1.170
1.640
1.860
2.850
3.620
4.630
5.200
6.000
IDC (A) max.
1.84
1.71
1.47
1.31
1.23
1.12
0.96
0.91
0.88
0.75
0.69
0.61
0.60
0.52
0.46
0.42
0.36
0.34
0.32
0.29
0.23
0.22
0.20
0.18
07D7
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
27
LMax SMD Power Inductor
LMXS Series – Shielded Style H
FEATURES
CHARACTERISTICS
• Magnetically Shielded Construction
• Large Current
• Low DCR
• Rated Current (IDC): The DC Current that will cause a drop in
inductance value of approximately 20%.
• Operating temperature range: -40°C ~ +125°C
APPLICATIONS
INDUCTANCE AND RATED
CURRENT RANGES
•
•
•
•
LCD Televisions
Notebooks
Handheld Communication
DC/DC Converters, etc.
•
•
•
•
DIMENSIONS
1212 3.9μH ~ 330μH
6.5 ~ 0.50A
121G 2.4μH ~ 47μH
8.0 ~ 2.5A
121J 10μH ~ 1000μH
4.0 ~ 0.40A
Electrical specifications at 25°C
D
I
H
C Max
A Max
F
Solder Mask
E
B Max
J
G
K
mm (inches)
Type
1212
121G
121J
A max.
12.5
(0.492)
12.5
(0.492)
12.5
(0.492)
B max.
12.5
(0.492)
12.5
(0.492)
12.5
(0.492)
C max.
4.50
(0.177)
6.20
(0.244)
8.00
(0.315)
D
5.00
(0.197)
5.00
(0.197)
5.00
(0.197)
E
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
F
7.60
(0.299)
7.60
(0.299)
7.60
(0.299)
G
10.00
(0.393)
10.00
(0.394)
10.00
(0.394)
H
6.00
(0.236)
6.00
(0.236)
6.00
(0.236)
I
3.00
(0.118)
3.00
(0.118)
3.00
(0.118)
J
7.00
(0.276)
7.00
(0.276)
7.00
(0.276)
K
18.0
(0.709)
18.0
(0.709)
18.0
(0.709)
HOW TO ORDER
LM
Family
LM = Power Inductor
28
XS
Series
XS = Shielded
1212
M
Size
Tolerance
1212 = 12x12xh
121G = 12x12xG(h)
(h = see catalog)
M = ±20%
R04
H
T
Inductance
Style
Termination
3R9 = 3.900μH
390 = 39.00μH
391 = 390μH
102 = 1000μH
T = Sn Plate
A
S
Special
Packaging
A = Standard
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
S = 13" Reel
LMax SMD Power Inductor
LMXS Series – Shielded Style H
ELECTRICAL CHARACTERISTICS
1212
Codes
3R9
4R7
6R8
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
L (μH)
3.9
4.7
6.8
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.015
0.018
0.023
0.028
0.038
0.050
0.057
0.066
0.080
0.097
0.132
0.150
0.190
0.220
0.260
0.308
0.380
0.530
0.620
0.700
0.876
0.990
IDC (A) max.
6.50
5.70
4.90
4.50
4.00
3.20
3.10
2.90
2.80
2.70
2.10
1.90
1.80
1.50
1.30
1.20
1.10
0.95
0.85
0.80
0.60
0.50
Codes
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
L (μH)
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.025
0.027
0.030
0.038
0.045
0.055
0.063
0.075
0.085
0.110
0.120
0.140
0.165
0.195
0.250
0.290
00400
00460
0.510
0.690
0.770
0.880
1.200
1.340
1.530
IDC (A) max.
4.00
3.50
3.30
3.00
2.80
2.30
2.10
2.00
1.80
1.70
1.50
1040
1.30
1.10
1.00
0.90
0.80
0.75
0.68
0.65
0.58
0.54
0048
0043
0040
121G
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
29
LMax SMD Power Inductor
LMXS Series – Shielded Style H
121J
Codes
2R4
4R7
7R6
100
120
150
180
220
270
330
390
470
30
L (μH)
2.4
4.7
7.6
10
12
15
18
22
27
33
39
47
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.012
0.016
0.020
0.022
0.025
0.027
0.039
0.043
0.046
0.065
0.073
0.100
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
IDC (A) max.
8.00
6.80
5.90
5.40
4.90
4.50
3.90
3.60
3.40
3.00
2.75
2.50
LMax SMD Power Inductor
LMXS Series – Shielded Style J
FEATURES
CHARACTERISTICS
•
•
•
•
•
• Rated DC current: The current when the inductance becomes 35%
lower than its initial value or the actual current when the temperature
of coil increases to ΔT=40°C. The smaller one is defined as Rated DC
Current. (Ta=25°C)
• Operating temperature range: -40 ~ 85°C
Directly connected electrode on ferrite core
High power, High saturation inductors
Ideal inductors for DC/DC converters
Magnetically shielded against radiation
Available on tape and reel for automatic surface
mounting
INDUCTANCE AND RATED
CURRENT RANGES
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
Power Supply for VTRs
LCD Televisions
Notebook PCs
Portable Communication
DC/DC Converters, etc.
0606 2.5 ~ 100μH
2.60 ~ 0.40A
1010 10 ~ 150μH
2.70 ~ 0.70A
101D 1.3 ~ 330μH
10.0 ~ 0.70A
101E 1.5 ~ 1000μH
10.5 ~ 0.35A
Electrical specifications at 25°C
DIMENSIONS
C
B
220
A
D
F
J
I
H
E
EPOXY
mm (inches)
Type
0606
1010
101D
101E
A max.
6.20
(0.244)
10.3
(0.406)
10.3
(0.406)
10.3
(0.406)
B max.
6.30
(0.248)
10.4
(0.409)
10.4
(0.409)
10.4
(0.409)
C max.
3.00
(0.118)
3.10
(0.122)
4.00
(0.157)
5.00
(0.197)
D
4.70
(0.185)
7.70
(0.303)
7.70
(0.303)
7.70
(0.303)
E
2.00
(0.079)
3.00
(0.118)
3.00
(0.118)
3.00
(0.118)
F
0.60
(0.024)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
H
2.60
(0.102)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
I
1.00
(0.039)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
J
4.60
(0.181)
7.30
(0.287)
7.30
(0.287)
7.30
(0.287)
HOW TO ORDER
LM
Family
LM = Power Inductor
XS
Series
XS = Shielded
0606
N
Size
Tolerance
0606 = 6x6xh
1010 = 10x10xh
101D = 10x10xD(h)
(h = see catalog)
N = ±30%
R04
J
T
Inductance
Style
Termination
R04 = 0.039μH
R39 = 0.390μH
3R9 = 3.900μH
390 = 39.00μH
391 = 390.0μH
392 = 3900μH
T = Sn Plate
A
S
Special
Packaging
A = Standard
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
S = 13" Reel
31
LMax SMD Power Inductor
LMXS Series – Shielded Style J
0606/1010/101D/101E
32
Codes
L
(μH)
Tolerance
Test
Condition
1R3
1R5
2R2
2R5
3R3
3R8
4R0
4R7
5R0
5R2
5R6
6R0
6R8
7R0
8R0
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
1.3
1.5
2.2
2.5
3.3
3.8
4.0
4.7
5.0
5.2
5.6
6.0
6.8
7.0
8.0
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
0606
–
–
–
0.0176
0.0203
–
0.027
–
0.0311
–
–
0.0419
–
–
0.0499
–
0.054
0.0716
0.0824
0.1015
0.119
0.146
0.1825
0.2095
0.2295
0.305
0.351
0.4185
0.520
–
–
–
–
–
–
–
–
–
–
–
–
DCR (Ω) max.
1010
101D
–
0.008
–
0.008
–
0.011
–
0.012
–
0.013
–
0.017
–
–
–
0.021
–
–
–
0.022
–
0.025
–
–
–
0.026
–
0.027
–
–
–
–
0.058
0.035
0.072
–
0.086
0.050
0.116
–
0.145
0.073
0.176
0.083
0.213
0.093
0.270
–
0.299
0.128
0.335
–
0.451
0.213
0.513
–
0.700
0.304
0.765
–
0.876
0.506
–
0.631
–
0.756
–
–
–
1.09
–
–
–
–
–
–
–
–
–
–
–
–
101E
–
0.006
0.007
–
0.010
–
–
0.012
–
–
–
–
0.018
–
–
0.020
0.026
0.033
0.041
0.046
61
0.069
0.084
0.106
0.130
0.149
0.201
0.227
0.253
0.303
0.370
0.419
0.500
0.672
0.812
0.953
1.289
1.430
1.599
1.768
1.989
0606
–
–
–
2.60
2.30
–
2.10
–
1.85
–
–
1.70
–
–
1.50
–
1.30
1.20
1.10
1.05
0.95
0.85
0.76
0.68
0.60
0.55
0.48
0.45
0.40
–
–
–
–
–
–
–
–
–
–
–
–
IDC (A) max.
1010
101D
–
10.0
–
10.0
–
8.00
–
7.50
–
6.50
–
6.00
–
–
–
5.70
–
–
–
5.50
–
5.20
–
–
4.90
–
4.80
–
–
–
–
2.70
4.40
2.25
–
2.22
3.60
1.90
–
1.78
2.90
1.63
2.80
1.46
2.30
1.32
–
1.18
2.10
1.10
–
1.04
1.50
0.94
–
0.84
1.35
0.76
–
0.70
1.15
–
1.03
–
0.92
–
–
–
0.70
–
–
–
–
–
–
–
–
–
–
–
–
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
101E
–
10.5
9.25
–
7.80
–
–
6.40
–
–
–
–
5.40
–
–
4.85
3.45
3.40
2.83
2.62
2.44
2.24
1.88
1.70
1.56
1.39
1.36
1.20
1.09
1.00
0.91
0.84
0.75
0.68
0.60
0.57
0.50
0.47
0.43
0.39
0.35
LMax SMD Power Inductor
LMXS Series – Shielded Style L
FEATURES
CHARACTERISTICS
• Magnetically Shielded Construction
• Large Current
• Low DCR
• Rated Current (IDC): The DC current that will cause an approximate ΔT
of 40°C. (Ta=25°C)
• Operating temperature range: -40°C ~ +125°C
APPLICATIONS
INDUCTANCE AND RATED
CURRENT RANGES
•
•
•
•
•
LCD Televisions
Notebooks
Camcorders
Digital Cameras
DC/DC Converters for Portable Devices
• 1010 0.8uH ~ 47.0uH
11.2 ~ 1.43A
• 101D 1.5uH ~ 330uH
10.0 ~ 0.70A
• Electrical specifications at 25°C
DIMENSIONS
A
C
D
I
B
E
G
I
Recommended
Solder PAD Layout
F
H
mm (inches)
Type
1010
101D
A max
10.3
(0.398)
10.3
(0.398)
B max
10.5
(0.414)
10.5
(0.414)
C max
3.10
(0.122)
3.80 ± 0.20
(0.150 ± 0.008)
D
3.00 ± 0.10
(0.119 ± 0.004)
3.00 ± 0.1
(0.119 ± 0.004)
E
7.70 ± 0.30
(0.303 ± 0.012)
7.70 ± 0.30
(0.303 ± 0.012)
F
1.20 ± 0.150
(0.048 ± 0.006)
1.2 ± 0.15
(0.048 ± 0.006)
G
7.30
(0.288)
7.30
(0.288)
H
3.20
(0.126)
3.20
(0.126)
I
1.60
(0.630)
1.60
(0.630)
HOW TO ORDER
LM
Family
LM = Power Inductor
XS
Series
XS = Shielded
1010
N
Size
Tolerance
1010 = 10x10xh
101D = 10x10xD(h)
(h = see catalog)
N = ±30%
2R2
L
T
Inductance
Style
Termination
0R8 = 0.8μH
470 = 47.00μH
331 = 330.0μH
T = Sn Plate
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
A
S
Special
Packaging
A = Standard
S = 13" Reel
33
LMax SMD Power Inductor
LMXS Series – Shielded Style L
ELECTRICAL CHARACTERISTICS
1010
Codes
0R8
1R5
2R2
3R3
4R7
6R8
8R0
100
150
220
330
470
L (μH)
0.8
1.5
2.2
3.3
4.7
6.8
8.0
10
15
22
33
47
Tolerance
N
N
N
N
N
N
N
N
N
N
N
N
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.0057
0.011
0.0159
0.021
0.030
0.035
0.050
0.059
0.091
0.143
0.202
0.299
IDC (A) max.
11.2
8.00
6.70
5.56
4.55
3.84
3.54
3.18
2.60
2.16
1.74
1.43
Codes
1R5
2R5
3R8
4R7
5R2
7R0
100
150
220
330
470
680
101
151
221
331
L (μH)
1.5
2.5
3.8
4.7
5.2
7.0
10
15
22
33
47
68
100
150
220
330
Tolerance
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.0081
0.010
0.013
0.022
0.022
0.027
0.035
0.050
0.073
0.093
0.128
0.213
0.304
0.506
0.756
1.090
IDC (A) max.
10.0
7.50
6.00
5.50
5.50
4.80
4.40
3.60
2.90
2.30
2.10
1.50
1.35
1.15
0.92
0.70
101D
34
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Power Inductor
LMXS Series – Shielded Style M
INDUCTANCE AND RATED
CURRENT RANGES
FEATURES
• Magnetically shielded construction
• RoHS compliance
•
•
•
•
APPLICATIONS
• LCD TV
• DC to DC Converters
• Notebook PC
0808 1.0 ~ 100μH
6.5 ~ 0.75A
08D8 1.8 ~ 100μH
7.0 ~ 1.05A
08E8 1.0 ~ 100μH
9.0 ~ 1.30A
Electrical specifications at 25°C
CHARACTERISTICS
• Rated DC Current: The current when the inductance
becomes 35% lower than its initial value.
• Operating temperature: -40 ~ 85°C
DIMENSIONS
A
C
D
F
EPOXY
J
K
E
B
H
mm (inches)
Type
0808
08D8
08E8
A
8.00 ± 0.30
(0.315 ± 0.012)
8.00 ± 0.30
(0.315 ± 0.012)
8.0 ± 0.30
(0.315 ± 0.012)
B
8.00 ± 0.30
(0.315 ± 0.012)
8.00 ± 0.30
(0.315 ± 0.012)
8.00 ± 0.30
(0.315 ± 0.012)
C max.
3.00
(0.118)
4.00
(0.157)
4.50
(0.177)
D Ref.
6.30
(0.248)
6.30
(0.248)
6.30
(0.248)
E Ref.
2.50
(0.098)
2.50
(0.098)
2.50
(0.098)
F Ref.
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
H
2.80
(0.110)
2.80
(0.110)
2.80
(0.110)
J
10.1
(0.398)
10.1
(0.398)
10.1
(0.398)
K
6.10
(0.240)
6.10
(0.240)
6.10
(0.240)
HOW TO ORDER
LM
Family
LM = Power Inductor
XS
Series
XN = Non-shielded
0808
N
Size
Tolerance
0808 = 8x8xh
08D8 = 8x8xD(h)
(h = see catalog)
N = ±30%
R04
M
T
Inductance
Style
Termination
3R9 = 3.900μH
390 = 39.00μH
391 = 390.0μH
392 = 3900μH
T = Sn Plate
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
A
S
Special
Packaging
A = Standard
S = 13" Reel
35
LMax SMD Power Inductor
LMXS Series – Shielded Style M
ELECTRICAL CHARACTERISTICS
0808/08D8/08E8
Codes
L
(μH)
Tolerance
1R0
1R2
1R8
2R0
2R5
3R3
3R5
3R9
4R7
6R0
6R8
7R3
100
150
220
330
470
680
101
1.0
1.2
1.8
2.0
2.5
3.3
3.5
3.9
4.7
6.0
6.8
7.3
10
15
22
33
47
68
100
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Test Condition
0808
08D8/08E8
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
100KHz, 0.25V 100KHz, 0.1V
0808
0.011
–
–
–
0.0156
0.0182
–
–
0.0247
–
–
0.039
0.047
0.069
0.099
0.156
0.159
0.286
0.430
DCR (Ω) max.
08D8
–
–
0.0156
–
0.0175
–
0.024
–
0.029
0.032
–
–
0.048
0.067
0.105
0.157
0.189
0.290
0.410
08E8
0.0095
0.0122
–
0.014
–
–
–
0.019
0.022
–
0.025
–
0.036
0.053
0.075
0.125
0.150
0.240
0.360
0808
6.5
–
–
–
4.5
4.0
–
–
3.4
–
–
2.80
2.50
1.90
1.60
1.30
1.15
0.92
0.75
*Saturation Current: The current when the inductance becomes 35% lower than its initial value.
36
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
I sat (A) max*
08D8
–
–
7.0
6.5
–
5.0
–
4.6
4.2
–
–
3.00
2.75
2.30
1.75
1.52
1.30
1.05
0838
9.0
8.0
–
7.0
–
–
–
5.9
5.6
–
4.4
–
4.0
2.9
2.6
2.2
1.8
1.5
1.3
LMax SMD Power Inductor
LMXS Series – Shielded Style P
INDUCTANCE AND RATED
CURRENT RANGES
FEATURES
• Magnetically Shielded Construction
• Large Current
• Low DCR
•
•
•
•
•
•
•
•
•
APPLICATIONS
•
•
•
•
•
LCD Televisions
Notebooks
Camcorders
Digital Cameras
DC/DC Converters for Portable Devices
CHARACTERISTICS
00404 1.5 ~ 33μH
1.55 ~ 0.32A
0505 1.0~ 39μH
1.72 ~ 0.30A
05C5 1.2 ~ 180μH
2.56 ~ 0.22A
0606 4.1 ~ 100μH
1.95 ~ 0.36A
06C6 2.6 ~ 100μH
2.6 ~ 0.42A
0707 3.3 ~ 10μH
3.00 ~ 1.8A
07C7 3.0 ~ 100μH
3.00 ~ 0.54A
07D7 3.3 ~ 100μH
3.50 ~ 0.65A
Electrical specifications at 25°C
• Rated Current (IDC): The DC current that will cause an
approximate ΔT of 40°C. (Ta=25°C)
• Operating temperature range: -40°C ~ +125°C
DIMENSIONS
F
A
I
J
C
B
D
E
H
G
J
Recommended
Solder PAD Layout
mm (inches)
Type
0404
0505
05C5
0606
06C6
0707
07C7
07D7
A
3.80 ± 0.50
(0.150 ± 0.012)
4.70 ± 0.50
(0.185 ± 0.012)
4.70 ± 0.50
(0.185 ± 0.012)
5.7 ± 0.50
(0.225 ± 0.012)
5.70 ± 0.50
(0.225 ± 0.012)
6.70 ± 0.40
(0.264 ± 0.158)
6.70 ± 0.50
(0.264 ± 0.012)
6.70 ± 0.50
(0.264 ± 0.012)
B max
3.80 ± 0.50
(0.150 ± 0.012)
4.70 ± 0.50
(0.185 ± 0.012)
4.70 ± 0.50
(0.185 ± 0.012)
5.70 ± 0.50
(0.225 ± 0.012)
5.70 ± 0.50
(0.225 ± 0.012)
6.70 ± 0.40
(0.264 ± 0.158)
6.70 ± 0.50
(0.264 ± 0.012)
6.70 ± 0.50
(0.264 ± 0.012)
C max
1.80 ± 0.20
(0.071 ± .008)
2.00
(0.079)
3.00
(0.119)
2.10
(0.083)
3.00
(0.119)
1.90
(0.075)
3.00
(0.119)
4.00
(0.158)
D
3.80
(0.150)
4.50
(0.177)
4.50
(0.177)
5.50
(0.217)
5.50
(0.217)
6.50
(0.256)
6.50
(0.256)
6.50
(0.256)
E
1.10
(0.044)
1.50
(0.059)
1.50
(0.059)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
F max
3.80
(0.150)
4.50
(0.177)
4.50
(0.177)
5.50
(0.217)
5.50
(0.217)
6.50
(0.256)
6.50
(0.256)
6.50
(0.256)
G max
5.00
(0.196)
6.90
(0.272)
6.90
(0.272)
8.20
(0.323)
8.20
(0.323)
9.50
(0.375)
9.50
(0.375)
9.50
(0.375)
H
1.10
(0.044)
1.50
(0.059)
1.50
(0.059)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
I
4.60
(0.181)
5.30
(0.209)
5.30
(0.209)
6.30
(0.248)
6.30
(0.248)
7.30
(0.288)
7.30
(0.288)
7.30
(0.288)
HOW TO ORDER
LM
Family
LM = Power Inductor
XS
Series
XS = Shielded
0505
M
Size
Tolerance
0505 = 5x5xh
05C5 = 5x5xC(h)
(h = see catalog)
M = ±20%
2R2
P
T
Inductance
Style
Termination
0R8 = 0.8μH
470 = 47.00μH
331 = 330.0μH
T = Sn Plate
A
S
Special
Packaging
A = Standard
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
S = 13" Reel
37
LMax SMD Power Inductor
LMXS Series – Shielded Style P
ELECTRICAL CHARACTERISTICS
0404
Codes
1R5
2R2
3R3
4R7
6R8
100
150
220
330
L (μH)
1.5
2.2
3.3
4.7
6.8
10
15
22
33
Tolerance
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.052
0.072
0.085
0.105
0.170
0.210
0.295
0.430
0.675
IDC (A) max.
1.55
1.20
1.10
0.90
0.73
0.55
0.45
0.40
0.32
Codes
1R0
2R2
2R7
3R3
3R9
4R7
5R6
6R8
8R2
100
120
150
180
220
270
330
390
L (μH)
1.0
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.045
0.060
0.070
0.085
0.110
0.128
0.145
0.158
0.185
0.200
0.210
0.240
0.338
0.397
0.441
0.694
0.709
IDC (A) max.
1.72
1.32
1.28
1.04
0.88
0.84
0.80
0.76
0.68
0.61
0.56
0.50
0.48
0.41
0.35
0.32
0.30
Codes
1R2
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
L (μH)
1.2
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.0236
0.0275
0.0313
0.0433
0.0492
0.0648
0.0720
0.1009
0.1089
0.1175
0.1283
0.1316
0.1490
0.1660
0.2350
0.2610
0.3780
0.3837
0.5870
0.6245
0.6990
0.9148
1.020
1.270
1.350
1.540
IDC (A) max.
2.56
2.20
2.04
1.60
1.57
1.44
1.32
1.17
1.12
1.04
1.00
0.84
0.76
0.72
0.70
0.58
0.56
0.50
0.48
0.41
0.35
0.32
0.29
0.27
0.24
0.22
0505
05C5
38
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Power Inductor
LMXS Series – Shielded Style P
0606
Codes
4R1
5R4
6R2
8R9
100
120
150
180
220
270
330
390
470
560
680
820
101
L (μH)
4.1
5.4
6.2
8.9
10
12
15
18
22
27
33
39
47
56
68
82
100
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.057
0.076
0.096
0.116
0.124
0.153
0.196
0.21
0.29
0.33
0.386
0.52
0.595
0.665
0.84
0.978
1.2
IDC (A) max.
1.95
1.6
1.4
1.25
1.2
1.1
0.97
0.85
0.8
0.75
0.65
0.57
0.54
0.5
0.43
0.41
0.36
Codes
2R6
3R0
4R2
5R3
6R2
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
L (μH)
2.6
3
4.2
5.3
6.2
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.018
0.024
0.031
0.038
0.045
0.053
0.065
0.076
0.103
0.11
0.122
0.175
0.189
0.212
0.26
0.305
0.355
0.463
0.52
IDC (A) max.
2.6
2.4
2.2
1.9
1.8
1.6
1.3
1.2
1.1
1
0.9
0.85
0.75
0.7
0.62
0.58
0.52
0.46
0.42
06C6
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
39
LMax SMD Power Inductor
LMXS Series – Shielded Style P
07007
Codes
3R3
4R7
6R8
100
L (μH)
3.3
4.7
6.8
10
Tolerance
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.069
0.075
0.106
0.15
IDC (A) max.
3
2.4
2.2
1.8
07C7
Codes
3R0
3R9
5R0
6R0
7R3
8R6
100
120
150
180
220
270
330
390
470
560
680
820
101
L (μH)
3
3.9
5
6
7.3
8.6
10
12
15
18
22
27
33
39
47
56
68
82
100
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.024
0.027
0.031
0.035
0.054
0.058
0.065
0.07
0.084
0.095
0.128
0.142
0.165
0.21
0.238
0.277
0.304
0.39
0.535
IDC (A) max.
3
2.6
2.4
2.25
2.1
1.85
1.7
1.55
1.4
1.32
1.2
1.05
0.97
0.86
0.8
0.73
0.65
0.6
0.54
Codes
3R3
5R0
6R0
7R3
8R6
100
120
150
180
220
270
330
390
470
560
680
820
101
L (μH)
3.3
5
6
7.3
8.6
10
12
15
18
22
27
33
39
47
56
68
82
100
Tolerance
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Test Condition
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
100KHz, 1.0V
DCR (Ω) max.
0.02
0.024
0.027
0.031
0.034
0.038
0.053
0.057
0.092
0.096
0.109
0.124
0.138
0.155
0.202
0.234
0.324
0.358
IDC (A) max.
3.5
2.9
2.5
2.3
2.2
2
1.7
1.6
1.5
1.3
1.2
1.1
1
0.95
0.85
0.75
0.7
0.65
07D7
40
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Miniature Power Inductor
LMMN Series – Miniature Style M
FEATURES
INDUCTANCE AND RATED CURRENT RANGES
• LMMN series miniature chip inductors are wound on a
special ferrite core.
• 0302/ 03A2/ 0403 are high Q value at high frequency
and low DC resistance.
• 0302/03A2/ 0403/ 0605 are low DC resistance, high
current capacity, and high impedance characteristics.
They are excellent for using as a choke coil in DC power
supply circuits.
• Operating temperature range (0202, 02A2, 02B2, 0302):
-40°C to 105°C
• Operating temperature range (03A2, 0403, 0605):
-40°C to 85°C
•
•
•
•
•
•
•
•
•
•
•
0202
1.00 ~ 10μH
2.80 ~ 0.65A
02A2
1.00 ~ 10μH
3.70 ~ 0.90A
02B2
1.00 ~ 22μH
2.30 ~ 0.51A
0302
1.00 ~ 100μH
1.00 ~ 0.1A
03A2
1.00 ~ 560μH
0.445 ~ 0.04A
0403
1.00 ~ 2200μH 0.50 ~ 0.03A
0302 (C) 0.47 ~ 120μH
3.40 ~ 0.17A
03A2 (C) 1.00 ~ 560μH
1.00 ~ 0.06A
0403 (C) 1.00 ~ 470μH
1.08 ~ 0.09A
0605 (C) 0.12 ~ 10000μH 6.00 ~ 0.05A
Electrical specifications at 25°C
APPLICATIONS
•
•
•
•
High Frequency Communication Products
Personal Computers
Disk Drives And Computer Peripherals
DC Power Supply Circuits
DIMENSIONS
H
I
C
PAD
LAYOUT
B
A
E
F
E
J
I
mm (inches)
Type
0202
02A2
02B2
0302 / 0302 (C)
03A2 / 03A2 (C)
0403 / 0403 (C)
0605 (C)
A
2.50 ± 0.20
(0.098 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
3.20 ± 0.30
(0.126 ± 0.012)
3.20 ± 0.30
(0.126 ± 0.012)
4.50 ± 0.30
(0.177 ± 0.012)
5.70 ± 0.30
(0.224 ± 0.012)
B
2.00 ± 0.20
(0.079 ± 0.008)
2.00 ± 0.20
(0.079 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
3.20 ± 0.20
(0.126 ± 0.008)
5.00 ± 0.30
(0.197 ± 0.012)
C
1.00 max.
(0.039)
1.25 max.
(0.049)
1.05 max.
(0.041)
1.55 ± 0.30
(0.061 ± 0.012)
2.00 ± 0.30
(0.079 ± 0.012)
2.60 ± 0.30
(0.102 ± 0.012)
4.70 ± 0.50
(0.185 ± 0.020)
E
0.40 ± 0.20
(0.016 ± 0.008)
0.40 ± 0.20
(0.016 ± 0.008)
0.85 ref
(0.033)
1.05 ± 0.30
(0.041 ± 0.012)
1.05 ± 0.30
(0.041 ± 0.012)
1.00 min.
(0.039)
1.30 min.
(0.051)
F
1.00 min.
(0.039)
1.00 min.
(0.039)
0.85 ref
(0.033)
1.05 ± 0.30
(0.041 ± 0.012)
1.05 ± 0.30
(0.041 ± 0.012)
1.00 min.
(0.039)
1.70 min.
(0.067)
H
2.10
(0.083)
2.10
(0.083)
2.50
(0.098)
2.00
(0.079)
2.00
(0.079)
3.00
(0.118)
5.00
(0.197)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
I
0.90
(0.035)
0.90
(0.035)
1.20
(0.047)
1.50
(0.059)
1.50
(0.059)
2.00
(0.079)
2.00
(0.079)
J
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
1.00
(0.039)
1.00
(0.039)
1.20
(0.047)
2.00
(0.079)
41
LMax SMD Power Inductor
LMMN Series – Miniature Style M
HOW TO ORDER
LM
Family
LM = Power Inductor
MN
Series
MN = Miniature
0202
N
Size
Tolerance
0202 = 2x2xh
(h = see catalog)
J = ±5%
K = ±10%
M = ±20%
N = ±30%
R04
M
T
Inductance
Style
Termination
R39 = 0.390μH
3R9 = 3.900μH
390 = 39.00μH
391 = 390.0μH
392 = 3900μH
T = Sn Plate
A
Special
A = Standard
C = Choke*
*Available for
0302, 03A2,
0402 and 0605
sizes only
R
Packaging
R = 7" Reel
S = 13" Reel*
*0605 size only
ELECTRICAL CHARACTERISTICS
0202
Part Number
LMMN0202M1R0MTAR
LMMN0202M1R5MTAR
LMMN0202M2R2MTAR
LMMN0202M3R3MTAR
LMMN0202M4R7MTAR
LMMN0202M6R8MTAR
LMMN0202M100MTAR
1
2
L
(μH)
1.0
1.5
2.2
3.3
4.7
6.8
10
Tolerance
M
M
M
M
M
M
M
Test
Condition
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
DCR
(Ω) max.
0.085
0.128
0.19
0.304
0.44
0.541
0.854
IRMS1
(A) Typical
1.7
1.4
1.1
0.94
0.78
0.7
0.52
ISAT2
(A) Typical
2
1.7
1.4
1.2
0.98
0.82
0.65
Test
Condition
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
DCR
(Ω) max.
0.088
0.126
0.155
0.272
0.45
0.45
0.612
0.756
I RMS1
(A) Typical
1.8
1.5
1.3
1
0.81
0.72
0.66
0.59
I SAT2
(A) Typical
2.7
2.2
2
1.6
1.2
1.15
1.1
0.9
I RMS1
(A) Typical
1.9
1.5
1.2
1.1
0.9
0.83
0.8
0.71
0.68
0.4
I SAT2
(A) Typical
2.3
1.9
1.5
1.3
1.1
0.98
0.9
0.84
0.79
0.51
The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. (Ta=25°C)
The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of its initial value. (Ta=25°C)
02A2
Part Number
LMMN02A2M1R0MTAR
LMMN02A2M1R5MTAR
LMMN02A2M2R2MTAR
LMMN02A2M3R3MTAR
LMMN02A2M4R7MTAR
LMMN02A2M5R6MTAR
LMMN02A2M6R8MTAR
LMMN02A2M100MTAR
1
2
L
(μH)
1.0
1.5
2.2
3.3
4.7
5.6
6.8
10
Tolerance
M
M
M
M
M
M
M
M
The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. (Ta=25°C)
The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of its initial value. (Ta=25°C)
02B2
Part Number
LMMN02B2M1R0MTAR
LMMN02B2M1R5MTAR
LMMN02B2M2R2MTAR
LMMN02B2M3R3MTAR
LMMN02B2M4R7MTAR
LMMN02B2M5R6MTAR
LMMN02B2M6R8MTAR
LMMN02B2M8R2MTAR
LMMN02B2M100MTAR
LMMN02B2M220MTAR
1
2
L
(μH)
1.0
1.5
2.2
3.3
4.7
5.6
6.8
8.2
10
22
Tolerance
M
M
M
M
M
M
M
M
M
M
Test
Condition
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
DCR
(Ω) max.
0.085
0.115
0.168
0.239
0.316
0.42
0.487
0.548
0.61
1.552
The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. (Ta=25°C)
The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of its initial value. (Ta=25°C)
42
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Power Inductor
LMMN Series – Miniature Style M
0302
Part Number
LMMN0302N1R0MTAR
LMMN0302N1R5MTAR
LMMN0302M2R2MTAR
LMMN0302M3R3MTAR
LMMN0302M4R7MTAR
LMMN0302K100MTAR
LMMN0302K150MTAR
LMMN0302K220MTAR
LMMN0302K330MTAR
LMMN0302K470MTAR
LMMN0302K680MTAR
LMMN0302K101MTAR
L
(μH)
1.0
1.5
2.2
3.3
4.7
10
15
22
33
47
68
100
Test
Condition
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
Tolerance
N
N
M
M
M
K
K
K
K
K
K
K
DCR
(Ω) max.
0.078
0.068
0.126
0.18
0.195
0.42
0.75
1
1.4
2.2
3.2
4.5
I DC1
(A) Typical
1
1.2
0.79
0.7
0.65
0.45
0.3
0.25
0.2
0.17
0.13
0.1
SRF
(MHz) min
100
100
64
50
43
26
22
19
17
13
9
8
IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C.
The smaller one is defined as the rated DC current. (Ta=25°C)
* Inductance Tolerance: J=±5%, K=±10%, M=±20%
1
0403
Part Number
L
(μH)
Tolerance
Test
Condition
LMMN03A2M1R0MTAR
LMMN03A2M1R2MTAR
LMMN03A2*1R5MTAR
LMMN03A2*1R8MTAR
LMMN03A2*2R2MTAR
LMMN03A2*2R7MTAR
LMMN03A2*3R3MTAR
LMMN03A2*3R9MTAR
LMMN03A2*4R7MTAR
LMMN03A2*5R6MTAR
LMMN03A2*6R8MTAR
LMMN03A2*8R2MTAR
LMMN03A2*100MTAR
LMMN03A2*120MTAR
LMMN03A2*150MTAR
LMMN03A2*180MTAR
LMMN03A2*220MTAR
LMMN03A2*270MTAR
LMMN03A2*330MTAR
LMMN03A2*390MTAR
LMMN03A2*470MTAR
LMMN03A2*560MTAR
LMMN03A2*680MTAR
LMMN03A2*820MTAR
LMMN03A2*101MTAR
LMMN03A2*121MTAR
LMMN03A2*151MTAR
LMMN03A2*181MTAR
LMMN03A2*221MTAR
LMMN03A2*271MTAR
LMMN03A2*331MTAR
LMMN03A2*391MTAR
LMMN03A2*471MTAR
LMMN03A2*561MTAR
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
M
M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1KHz, 0.1V
1KHz, 0.1V
Q
20
20
20
20
20
20
20
20
20
20
20
20
35
35
35
35
35
35
40
40
40
40
40
40
40
40
40
40
40
40
40
50
50
50
Quality Factor
Test Contition
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
DCR
(Ω) max.
I DC1
(A) Typical
SRF
(MHz) min
0.5
0.6
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.5
2.8
3.1
3.5
3.9
4.3
4.9
5.5
6.2
7
8
9.3
10.2
11.8
12.5
15
22
25
28
0.445
0.425
0.4
0.39
0.37
0.32
0.3
0.29
0.27
0.25
0.24
0.225
0.19
0.18
0.17
0.165
0.15
0.125
0.115
0.11
0.1
0.085
0.08
0.07
0.08
0.075
0.07
0.065
0.065
0.065
0.065
0.05
0.045
0.04
100
100
75
60
50
43
38
35
31
28
25
23
20
18
16
15
14
13
12
11
11
10
9
8.5
8
7.5
7
6
5.5
5
5
5
5
5 ref
IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C.
The smaller one is defined as the rated DC current. (Ta=25°C)
* Inductance Tolerance: J=±5%, K=±10%, M=±20%
1
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
43
LMax SMD Power Inductor
LMMN Series – Miniature Style M
0403
Part Number
L
(μH)
Tolerance
Test
Condition
LMMN0403M1R0MTAR
LMMN0403M1R2MTAR
LMMN0403M1R5MTAR
LMMN0403M1R8MTAR
LMMN0403M2R2MTAR
LMMN0403M2R7MTAR
LMMN0403M3R3MTAR
LMMN0403M3R9MTAR
LMMN0403*4R7MTAR
LMMN0403*5R6MTAR
LMMN0403*6R8MTAR
LMMN0403*8R2MTAR
LMMN0403*100MTAR
LMMN0403*120MTAR
LMMN0403*150MTAR
LMMN0403*180MTAR
LMMN0403*220MTAR
LMMN0403*270MTAR
LMMN0403*330MTAR
LMMN0403*390MTAR
LMMN0403*470MTAR
LMMN0403*560MTAR
LMMN0403*680MTAR
LMMN0403*820MTAR
LMMN0403*101MTAR
LMMN0403*121MTAR
LMMN0403*151MTAR
LMMN0403*181MTAR
LMMN0403*221MTAR
LMMN0403*271MTAR
LMMN0403*331MTAR
LMMN0403*391MTAR
LMMN0403*471MTAR
LMMN0403*561MTAR
LMMN0403*681MTAR
LMMN0403*821MTAR
LMMN0403*102MTAR
LMMN0403*122MTAR
LMMN0403*152MTAR
LMMN0403*182MTAR
LMMN0403*222MTAR
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
M
M
M
M
M
M
M
M
K, M
K, M
K, M
K, M
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1KHz, 0.1V
1KHz, 0.1V
1KHz, 0.1V
1KHz, 0.1V
1KHz, 0.1V
1KHz, 0.1V
1KHz, 0.1V
1KHz, 0.1V
1KHz, 0.1V
SPEC
20
20
20
20
20
20
20
20
30
30
30
30
35
35
35
35
35
35
35
35
35
35
35
35
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
Quality Factor
Test Contition
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
796KHz, 0.1V
252KHz, 0.1V
252KHz, 0.1V
252KHz, 0.1V
252KHz, 0.1V
252KHz, 0.1V
DCR
(Ω) max.
I DC1
(A) Typical
SRF
(MHz) min
0.2
0.2
0.3
0.3
0.3
0.32
0.35
0.38
0.4
0.47
0.5
0.56
0.56
0.62
0.73
0.82
0.94
1.1
1.2
1.4
1.5
1.7
1.9
2.2
2.5
3
3.7
4.5
5.4
6.8
8.2
9.7
11.8
14.5
17
20.5
25
30
37
45
50
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.45
0.45
0.4
0.38
0.36
0.34
0.32
0.3
0.27
0.24
0.22
0.2
0.18
0.17
0.16
0.15
0.13
0.12
0.11
0.1
0.095
0.09
0.08
0.07
0.065
0.06
0.05
0.045
0.04
0.035
0.03
120
100
85
75
62
53
47
41
38
33
31
27
23
21
19
17
15
14
12
11
10
9.3
8.4
7.5
6.8
6.2
5.5
5
4.5
4
3.6
3.3
3
2.7
2.5
2.2
2
1.8
1.6
1.5
1.3
IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C.
The smaller one is defined as the rated DC current. (Ta=25°C)
* Inductance Tolerance: J=±5%, K=±10%, M=±20%
1
44
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax SMD Power Inductor
LMMN Series – Miniature Style M
0302 (C)
1
2
Part Number
L
(μH)
Tolerance
Test
Condition
DCR
(Ω) max.
I RMS1
(A) Typ.
I SAT2
(A) Typ.
LMMN0302NR47MTCR
LMMN0302N1R0MTCR
LMMN0302N1R5MTCR
LMMN0302N2R2MTCR
LMMN0302N3R3MTCR
LMMN0302N4R7MTCR
LMMN0302N6R8MTCR
LMMN0302M100MTCR
LMMN0302M150MTCR
LMMN0302M220MTCR
LMMN0302M330MTCR
LMMN0302M470MTCR
LMMN0302M680MTCR
LMMN0302M101MTCR
LMMN0302M121MTCR
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
120
N
N
N
N
N
N
N
M
M
M
M
M
M
M
M
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
0.03
0.045
0.057
0.076
0.12
0.18
0.24
0.38
0.57
0.81
1.15
1.78
2.28
2.7
4.38
2.55
2.05
1.75
1.6
1.2
1
0.85
0.7
0.52
0.45
0.39
0.31
0.275
0.25
0.2
3.4
2.3
1.75
1.55
1.25
1
0.85
0.75
0.6
0.5
0.38
0.33
0.28
0.18
0.17
SRF
(MHz) min
100
100
70
70
50
40
40
30
20
20
13
11
11
8
8
The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. (Ta=25°C)
The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of its initial value. (Ta=25°C)
03A2 (C)
Part Number
L
(μH)
Tolerance
Test
Condition
DCR
(Ω) max.
I DC1
(A) Typical
LMMN03A2M1R0MTCR
LMMN03A2M2R2MTCR
LMMN03A2M3R3MTCR
LMMN03A2M4R7MTCR
LMMN03A2M6R8MTCR
LMMN03A2M100MTCR
LMMN03A2*220MTCR
LMMN03A2*470MTCR
LMMN03A2*101MTCR
LMMN03A2*151MTCR
LMMN03A2*221MTCR
LMMN03A2*331MTCR
LMMN03A2*391MTCR
LMMN03A2*471MTCR
LMMN03A2*561MTCR
1.0
2.2
3.3
4.7
6.8
10
22
47
100
150
220
330
390
470
560
M
M
M
M
M
M
K, M
K, M
J, K
J, K
J, K
J, K
J, K
J, K
J, K
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
0.078
0.126
0.165
0.195
0.33
0.572
0.923
1.69
4.55
9.1
10.92
13
22.1
24.7
28.6
1
0.79
0.5
0.45
0.45
0.3
0.25
0.17
0.1
0.08
0.07
0.06
0.06
0.06
0.06
SRF
(MHz) min
100
64
50
43
38
26
19
12
8
7
5.5
4.5
4
3.7
3.4
IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C.
The smaller one is defined as the rated DC current. (Ta=25°C)
* Inductance Tolerance: J=±5%, K=±10%, M=±20%
1
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
45
LMax SMD Power Inductor
LMMN Series – Miniature Style M
0403 (C)
Part Number
L
(μH)
Tolerance
Test
Condition
DCR
(Ω) max.
I DC1
(A) Typical
LMMN0403M1R0MTCR
LMMN0403M1R5MTCR
LMMN0403M2R2MTCR
LMMN0403M3R3MTCR
LMMN0403*4R7MTCR
LMMN0403*6R8MTCR
LMMN0403*100MTCR
LMMN0403*150MTCR
LMMN0403*220MTCR
LMMN0403*330MTCR
LMMN0403*470MTCR
LMMN0403*680MTCR
LMMN0403*101MTCR
LMMN0403*151MTCR
LMMN0403*221MTCR
LMMN0403*331MTCR
LMMN0403*471MTCR
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
M
M
M
M
K, M
K, M
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
0.08
0.09
0.11
0.13
0.15
0.2
0.24
0.32
0.6
1
1.1
1.7
2.2
3.5
4
6.8
8.5
1.08
1
0.9
0.8
0.75
0.72
0.65
0.57
0.42
0.31
0.28
0.22
0.19
0.13
0.11
0.1
0.09
SRF
(MHz) min
100
85
60
47
35
30
23
20
15
12
10
8.4
6.8
5.5
4.5
3.6
3
IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C.
The smaller one is defined as the rated DC current. (Ta=25°C)
* Inductance Tolerance: J=±5%, K=±10%, M=±20%
1
0605 (C)
Part Number
L
(μH)
Tolerance
Test
Condition
DCR
(Ω) max.
I DC1
(A) Typical
LMMN0605MR12MTCS
LMMN0605MR27MTCS
LMMN0605MR47MTCS
LMMN0605M1R0MTCS
LMMN0605M1R5MTCS
LMMN0605M2R2MTCS
LMMN0605M3R3MTCS
LMMN0605M4R7MTCS
LMMN0605M6R8MTCS
LMMN0605*100MTCS
LMMN0605*150MTCS
LMMN0605*220MTCS
LMMN0605*330MTCS
LMMN0605*470MTCS
LMMN0605*680MTCS
LMMN0605*101MTCS
LMMN0605*151MTCS
LMMN0605*221MTCS
LMMN0605*331MTCS
LMMN0605*471MTCS
LMMN0605*681MTCS
LMMN0605*102MTCS
LMMN0605*222MTCS
LMMN0605*472MTCS
LMMN0605*103MTCS
0.12
0.27
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
2200
4700
10000
M
M
M
M
M
M
M
M
M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
1MHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
100KHz, 0.1V
10KHz, 0.1V
10KHz, 0.1V
10KHz, 0.1V
10KHz, 0.1V
0.0098
0.014
0.0182
0.027
0.031
0.041
0.05
0.0574
0.104
0.13
0.21
0.266
0.448
0.56
0.938
1.204
2.66
3.36
6.16
7.56
11.34
14.42
30.1
61.04
140
6
5.3
4.8
4
3.7
3.2
2.9
2.7
2
1.7
1.4
1.2
0.9
0.8
0.64
0.56
0.42
0.32
0.27
0.24
0.19
0.15
0.1
0.07
0.05
IDC:The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C.
The smaller one is defined as the rated DC current. (Ta=25°C)
* Inductance Tolerance: J=±5%, K=±10%, M=±20%
1
46
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
SRF
(MHz) min
450
300
200
150
110
80
40
30
25
20
17
15
12
10 ref
7.6
6.5
5
4
3.1
2.4
1.9
1.7
1.2
0.8
0.5
LMax SMD Power Inductor
LMMN Series – Miniature Style M
SHELF STORAGE SPECIFICATIONS
Items
Specifications
Shelf Storage Conditions
Temperature range: 25±3ºC • Humidity: w/2
2. Length direction (dimension b): it is not specified.
3. When total area of voids(including one exposing coil) occurring to each sides
is not greater than 50% of coating resin area that is acceptable
Using calipers
Only top side of wire exposed.
(regardlesss of whole top side of wire exposed)
Conforming
Less than 1/2 of joint side Lenght
(More than 1/2 is selected as defect
Wire is soldered insufficiently
and less than half of outer
diameter is covered with solder.
Visual inspection
Solder heat proof:
1. Preheating: 160±10ºC 90s
2. Retention time: 245±5ºC for 3 ± 1 sec
1. Vibration frequency:
(10Hz to 55Hz to 10Hz) in 60 sec. as a period
2. Vibration time: period cycled for 2 hr in each
of 3 mutual perpendicular directions
3. Amplitude: 1.5mm max.
Add static load 4.9N(500gf) to inductor
through hole of test board for 10 ± 2 sec
1. Repeat 100 cycles as follow:
(-40ºC ± 2ºC, 30 ± 3 minutes) (room
temperature , 5 minutes) (+125ºC ± 2ºC,
30 ± 3 minutes) (room temperature , 5
minutes)
2. Recovery: 48 +4/-0 hours of recovery under the
standard condition after the test.
1. Environment condition: 85ºC ± 2ºC
2. Applied current: rated current
3. Duration: 500 +4/-0 hours
1. Environment condition: 60ºC ± 2ºC
2. Humidity: 90~95%
3. Applied current: rated current
4. Duration: 500 +4/-0 hours
Vibration
Inductance change: within ± 10% without mechanical damage such as
break
Terminal Strength
No detachment of terminal pin and no breakage of wire
Thermal Shock
Inductance change: within ± 10% without mechanical damage such as
break
High Temperature
Resistance
Inductance change: within ± 10% without mechanical damage such as
break
Humidity Resistance
Inductance change: within ± 10% without mechanical damage such as
break
Low Temperature
Storage
Inductance change: within ± 10% without mechanical damage such as break
Store temperature:
-40ºC ± 2ºC for total 500 +4/-0 hours
High Temperature
Storage
Inductance change: within ± 10% without mechanical damage such as break
Store temperature:
+125ºC ± 2ºC for total 500 +4/-0 hours
Inductance
DC Resistance
a. Temperature: 25 ± 3ºC
b. Relative Humidity: 45 to 75%RH
c. Measuring equipment:
Current measure: Chroma 3302 + Chroma 1320
Measuring instrument: Chroma A165022
Within specified tolerance
In accordance with electrical specification.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
55
LMax Low Profile Power Inductor
LMLP Series – Style C
PACKAGING SPECIFICATIONS – CARRIER TAPE DIMENSIONS
4.00±0.10
2.00±0.05
1.75±0.10
A
K
F
W
T
Ø1.50 +0.1
-0.0
P
B
Ø1.00
mm (inches)
A
B
P
F
W
T
K
2.6 ± 0.1
(0.102 ± 0.004)
3.2 ± 0.1
(0.126 ± 0.004)
3.2 ± 0.1
(0.126 ± 0.004)
3.2 ± 0.1
(0.126 ± 0.004)
4.3 ± 0.1
(0.169 ± 0.004)
4.3 ± 0.1
(0.169 ± 0.004)
4.3 ± 0.1
(0.169 ± 0.004)
5.25 ± 0.1
(0.207 ± 0.004)
5.25 ± 0.1
(0.207 ± 0.004)
5.15 ± 0.1
(0.203 ± 0.004)
6.3 ± 0.1
(0.248 ± 0.004)
6.3 ± 0.1
(0.248 ± 0.004)
6.3 ± 0.1
(0.248 ± 0.004)
6.3 ± 0.1
(0.248 ± 0.004)
6.3 ± 0.1
(0.248 ± 0.004)
8.3 ± 0.1
(0.327 ± 0.004)
2.6 ± 0.1
(0.102 ± 0.004)
3.2 ± 0.1
(0.126 ± 0.004)
3.2 ± 0.1
(0.126 ± 0.004)
3.2 ± 0.1
(0.126 ± 0.004)
4.3 ± 0.1
(0.169 ± 0.004)
4.3 ± 0.1
(0.169 ± 0.004)
4.3 ± 0.1
(0.169 ± 0.004)
5.25 ± 0.1
(0.207 ± 0.004)
5.25 ± 0.1
(0.207 ± 0.004)
5.15 ± 0.1
(0.203 ± 0.004)
6.3 ± 0.1
(0.248 ± 0.004)
6.3 ± 0.1
(0.248 ± 0.004)
6.3 ± 0.1
(0.248 ± 0.004)
6.3 ± 0.1
(0.248 ± 0.004)
6.3 ± 0.1
(0.248 ± 0.004)
8.3 ± 0.1
(0.327 ± 0.004)
4 ± 0.1
(0.157±0.004)
4.0 ± 0.1
(0.157 ± 0.004)
4.0 ± 0.1
(0.157 ± 0.004)
4.0 ± 0.1
(0.157 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
8.0 ± 0.1
(0.315 ± 0.004)
12.0 ± 0.1
(0.472 ± 0.004)
3.5 ± 0.1
(0.138 ± 0.004)
3.5 ± 0.1
(0.138 ± 0.004)
3.5 ± 0.1
(0.138 ± 0.004)
3.5 ± 0.1
(0.138 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
5.5 ± 0.1
(0.217 ± 0.004)
7.5 ± 0.1
(0.295 ± 0.004)
8.0 ± 0.2
(0.315 ± 0.008)
8.0 ± 0.2
(0.315 ± 0.008)
8.0 ± 0.2
(0.315 ± 0.008)
8.0 ± 0.2
(0.315 ± 0.008)
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
12.0 ± 0.3
(0.472 ± 0.012)
16.0 ± 0.3
(0.630 ± 0.012)
0.25 ± 0.05
(0.009 ± 0.002)
0.3 ± 0.05
(0.012 ± 0.002)
0.3 ± 0.05
(0.012 ± 0.002)
0.3 ± 0.05
(0.012 ± 0.002)
0.3 ± 0.1
(0.012 ± 0.004)
0.3 ± 0.1
(0.012 ± 0.004)
0.3 ± 0.1
(0.012 ± 0.004)
0.3 ± 0.1
(0.012 ± 0.004)
0.3 ± 0.1
(0.012 ± 0.004)
0.4 ± 0.1
(0.016 ± 0.004)
0.4 ± 0.1
(0.016 ± 0.004)
0.4 ± 0.1
(0.016 ± 0.004)
0.4 ± 0.1
(0.016 ± 0.004)
0.4 ± 0.1
(0.016 ± 0.004)
0.4 ± 0.1
(0.016 ± 0.004)
0.5 ± 0.1
(0.020 ± 0.004)
1.3 ± 0.1
(0.051 ± 0.004)
1.4 ± 0.1
(0.055 ± 0.004)
1.6 ± 0.1
(0.063 ± 0.004)
1.9 ± 0.1
(0.075 ± 0.004)
1.4 ± 0.1
(0.055 ± 0.004)
1.6 ± 0.1
(0.063 ± 0.004)
2.1 ± 0.1
(0.083 ± 0.004)
1.4 ± 0.1
(0.055 ± 0.004)
2.3 ± 0.1
(0.091 ± 0.004)
4.2 ± 0.1
(0.165 ± 0.004)
1.4 ± 0.1
(0.055 ± 0.004)
1.6 ± 0.1
(0.063 ± 0.004)
2.3 ± 0.1
(0.091 ± 0.004)
3.1 ± 0.1
(0.122 ± 0.004)
4.7 ± 0.1
(0.185 ± 0.004)
4.5 ± 0.1
(0.177 ± 0.004)
Part Number
LMLP0202****CTAR
LMLP0303****CTAR
LMLP03A2****CTAR
LMLP03B3****CTAR
LMLP0404****CTAS
LMLP04A4****CTAS
LMLP04B4****CTAS
LMLP0505****CTAR
LMLP05B5****CTAR
LMLP05D5****CTAS
LMLP0606****CTAR
LMLP06A6****CTAR
LMLP06B6****CTAS
LMLP06C6****CTAS
LMLP06D6****CTAS
LMLP0808****CTAS
PACKAGING SPECIFICATIONS – REEL DIMENSIONS
2.0±0.50
P
21.0±0.80
D
Code
7" Reel
13" Reel
D
180±1.50
330±1.50
P
62.0±1.50
100±1.50
13.0±0.50
T2
56
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102920
– smd power inductors –
Reel
Size
SPQ
7"
2500
7"
2000
7"
2000
7"
2000
13"
5000
13"
4500
13"
3500
7"
1000
7"
800
13"
1500
7"
1000
7"
1000
13"
2500
13"
2000
13"
1500
13"
1000
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
INDUCTANCE AND RATED
CURRENT RANGES
FEATURES
•
•
•
•
•
Shielded Construction
Large Current Rating
Lower Temperature Rise
Low Profile
Available on tape and reel
•
•
•
•
•
•
•
•
•
•
•
APPLICATIONS
•
•
•
•
•
•
Personal Computers
Servers
High Current POL Converters
Low Profile High Current Power Supplies
DC/DC Converters
DC/DC Converters for FPGA
0405
05A6
0506
0707
07A7
07B7
07C7
1011
13A3
1313
13B3
0.1 μH ~ 3.3 μH
0.1 μH ~ 4.7 μH
0.1 μH ~ 4.7 μH
0.1 μH ~ 4.7 μH
0.1 μH ~ 10 μH
0.1 μH ~ 10 μH
0.56 μH ~ 10 μH
0.19 μH ~ 47 μH
0.1 μH ~ 10 μH
0.1 μH ~ 10 μH
0.1 μH ~ 10 μH
22 ~ 4 A
45 ~ 5 A
27 ~ 8.2 A
40 ~ 8 A
50 ~ 7 A
60 ~ 7 A
12 ~ 4.5 A
90 ~ 3 A
84 ~ 14 A
118 ~ 16 A
120 ~ 15.5 A
• All test data taken at 25ºC
• Operating Temperature Range:
-55°C ~ +155°C
• ISAT: The current that causes an inductance drop of
approximately 25% (30% on 0405 size).
• IDC: DC Current that causes an approximate ΔT of 40ºC.
DIMENSIONS
D
B
C
F
G
F
E
H
A
Recommended
Land Pattern
mm
Type
0405
05A6
0506
0707
07B7
07A7
07C7
1011
1313
13B3
A
4.0±0.3
5.2±0.2
5.2±0.3
6.6±0.3
6.6±0.3
6.6±0.2
6.6±0.3
10.0±0.3
12.8±0.5
12.8±0.5
B
4.45±0.25
5.7±0.7
5.4±0.3
7.0±0.3
7.3±0.3
7.3±MAX
7.3±0.3
11.15±0.35
13.5±1.0
13.5±1.0
C
1.8±0.2
1.8±0.2
3.0±MAX
1.8±0.2
2.2±0.2
3.0±MAX
4.8±0.2
4.0±MAX
5.0±MAX
6.5±MAX
D
0.8±0.3
1.1±0.3
1.2±0.2
1.8±0.3
1.8±0.3
1.6±0.3
1.8±0.3
2.0±0.5
2.5±0.5
2.5±0.5
E
1.5±0.3
2.5±0.3
2.2±0.3
3.0±0.3
3.0±0.3
3.0±0.3
3.0±0.3
3.0±0.5
3.8±0.5
3.2±0.5
F
1.5
2
1.9
2.6
2.6
1.85
2.95
4.05
3.25
3.25
G
2.22
2.2
2.2
2.5
2.5
3.7
2.5
5.4
8
8
0707
M
R04
D
T
Size
Tolerance
Inductance
Style
Termination
H
2.5
2.8
2.5
3.5
3.5
3.5
3.5
4.4
5
5
HOW TO ORDER
LM
Family
LM = Power Inductor
LP
Series
LP = Low Profile
0707 = 7x7xh
07A7 = 7x7xA(h)
(h = see catalog)
M = 20%
R39 = 0.390μH
3R9 = 3.900μH
390 = 39.00μH
391 = 390.0μH
T = Sn Plate
A
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
Special
A = Standard
S
Packaging
S = 13" Reel
57
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
ELECTRICAL CHARACTERISTICS
0405
Part Number
Inductance (μH)
Tolerance
Test Condition
DCR (mΩ)
Typical
DCR (mΩ)
Max
I DC (A)
Typical
LMLP0405MR10DTAS
LMLP0405MR15DTAS
LMLP0405MR22DTAS
LMLP0405MR47DTAS
LMLP0405MR56DTAS
LMLP0405MR68DTAS
LMLP0405M1R0DTAS
LMLP0405M1R2DTAS
LMLP0405M1R5DTAS
LMLP0405M2R2DTAS
LMLP0405M3R3DTAS
LMLP0405M4R7DTAS
LMLP0405M5R6DTAS
LMLP0405M6R8DTAS
LMLP0405M100DTAS
0.1
0.15
0.22
0.47
0.56
0.68
1
1.2
1.5
2.2
3.3
4.7
5.6
6.8
10
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
3.5
6
6
12.5
14
16
24
24
38
52
74
98
105
160
256
4
6.6
6.6
14
16
18
27
27
46
58
87
110
115
175
282
12
9
9
7
6.5
6
4.5
4.5
4
3
2.5
2.2
1.8
1.5
1.2
Isat (A)
Typical
22
13
12.5
9.5
10
9
7
7
6
5
4
3.5
3.5
2.5
2.2
Part Number
Inductance (μH)
Tolerance
Test Condition
DCR (mΩ)
Typical
DCR (mΩ)
Max
LMLP05A6MR10DTAS
LMLP05A6MR15DTAS
LMLP05A6MR22DTAS
LMLP05A6MR24DTAS
LMLP05A6MR33DTAS
LMLP05A6MR47DTAS
LMLP05A6MR68DTAS
LMLP05A6M1R0DTAS
LMLP05A6M1R2DTAS
LMLP05A6M1R5DTAS
LMLP05A6M2R2DTAS
LMLP05A6M3R3DTAS
LMLP05A6M4R7DTAS
LMLP05A6M5R6DTAS
LMLP05A6M6R8DTAS
LMLP05A6M8R2DTAS
LMLP05A6M100DTAS
LMLP05A6M150DTAS
LMLP05A6M220DTAS
0.1
0.15
0.22
0.24
0.33
0.47
0.68
1
1.2
1.5
2.2
3.3
4.7
5.6
6.8
8.2
10
15
22
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
3.6
3.8
4
6
6.3
7.3
11
17.5
23
26.5
42
66
103
112
130
148
180
240
350
4
4.6
5.5
7
7.3
8.6
12.4
20
28
30.5
50
76
116
122
150
171
199
270
390
I DC (A)
Typical
18
16
15
13
12
11.5
10
7
6.2
5.5
4.2
3.3
2.8
2.5
2.4
2.3
2.3
1.9
1.5
Isat (A)
Typical
45
27
25
23
21.3
18
12.8
13.7
11
9.8
9
7.3
5
4
3.8
3.5
3.4
2.8
1.8
05A6
ISAT: The current that causes an inductance drop of approximately 25% (30% on 0405 size).
IDC: DC Current that causes an approximate ΔT of 40ºC.
58
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
0506
Part Number
Inductance (μH)
Tolerance
Test Condition
DCR (mΩ)
Typical
DCR (mΩ)
Max
I DC (A) Typical
LMLP0506MR20DTAS
LMLP0506MR47DTAS
LMLP0506MR68DTAS
LMLP0506M1R0DTAS
LMLP0506M1R2DTAS
LMLP0506M1R5DTAS
LMLP0506M2R2DTAS
LMLP0506M3R3DTAS
LMLP0506M4R7DTAS
LMLP0506M6R8DTAS
LMLP0506M100DTAS
0.2
0.47
0.68
1
1.2
1.5
2.2
3.3
4.7
6.8
10
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
3.5
7.4
11
13
15
20
25
32
50
75
110
3.9
8.5
12
14
16
25
29
38
60
90
125
18
13.5
8.5
7
6.5
6
5.5
5
3.5
3
2.5
Part Number
Inductance (μH)
Tolerance
Test Condition
LMLP0707MR10DTAS
LMLP0707MR15DTAS
LMLP0707MR16DTAS
LMLP0707MR18DTAS
LMLP0707MR20DTAS
LMLP0707MR22DTAS
LMLP0707MR24DTAS
LMLP0707MR33DTAS
LMLP0707MR47DTAS
LMLP0707MR56DTAS
LMLP0707MR68DTAS
LMLP0707M1R0DTAS
LMLP0707M1R2DTAS
LMLP0707M1R5DTAS
LMLP0707M2R2DTAS
LMLP0707M3R3DTAS
LMLP0707M4R7DTAS
LMLP0707M5R6DTAS
LMLP0707M6R8DTAS
LMLP0707M8R2DTAS
LMLP0707M100DTAS
LMLP0707M150DTAS
LMLP0707M220DTAS
0.1
0.15
0.16
0.18
0.2
0.22
0.24
0.33
0.47
0.56
0.68
1
1.2
1.5
2.2
3.3
4.7
5.6
6.8
8.2
10
15
22
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
DCR (mΩ)
Typical
2
2.3
2.3
2.4
2.5
3.5
3.6
4.5
7.1
7.9
8.3
16.5
19
23
32
43
53
59
63
101
134
190
236
DCR (mΩ)
Max
2.4
2.7
2.7
2.9
3
4
4.3
5
8.3
9.3
10
18
23
27
37
48
60
68
73
116
154
210
280
Isat (A)
Typical
14.5
12
14
11
11
8.5
7.5
6
5
4
3.5
0707
I DC (A) Typical
21
18
18
18
18
15
14.5
14
11.7
11
10.5
8
7.5
7
6
5
4.5
4
4
3.2
2.8
2.1
1.5
Isat (A)
Typical
40
39
38
36
35
32
32
25
20
18
16
14
13
12
10
8
7
6
5.5
5
4
3.3
2.5
ISAT: The current that causes an inductance drop of approximately 25% (30% on 0405 size).
IDC: DC Current that causes an approximate ΔT of 40ºC.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
59
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
07B7
Part Number
Inductance (μH)
Tolerance
Test Condition
DCR (mΩ)
Typical
DCR (mΩ)
Max
I DC (A) Typical
LMLP07B7MR10DTAS
LMLP07B7MR15DTAS
LMLP07B7MR20DTAS
LMLP07B7MR22DTAS
LMLP07B7MR33DTAS
LMLP07B7MR36DTAS
LMLP07B7MR47DTAS
LMLP07B7MR56DTAS
LMLP07B7MR60DTAS
LMLP07B7MR68DTAS
LMLP07B7MR82DTAS
LMLP07B7M1R0DTAS
LMLP07B7M1R5DTAS
LMLP07B7M2R2DTAS
LMLP07B7M3R3DTAS
LMLP07B7M4R7DTAS
LMLP07B7M5R6DTAS
LMLP07B7M6R8DTAS
LMLP07B7M8R2DTAS
LMLP07B7M100DTAS
LMLP07B7M150DTAS
LMLP07B7M220DTAS
0.1
0.15
0.2
0.22
0.33
0.36
0.47
0.56
0.6
0.68
0.82
1
1.5
2.2
3.3
4.7
5.6
6.8
8.2
10
15
22
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
1.4
1.8
1.9
2
3.6
3.8
4.8
5.5
5.7
6.4
8
10.5
17
23
34
41
56
65
81
92
150
185
1.7
2.3
2.8
3.2
4.4
4.6
5.1
6.5
6.9
7.2
9.5
13.5
20
28
39
50
62
72
95
101
180
215
30
30
23
21
18
17
15
13
13
13
11
11
9
7
6
5.5
5
4
3.6
3.2
2.5
1.8
Part Number
Inductance (μH)
Tolerance
Test Condition
LMLP07A7MR22DTAS
LMLP07A7MR33DTAS
LMLP07A7MR47DTAS
LMLP07A7MR56DTAS
LMLP07A7MR68DTAS
LMLP07A7MR82DTAS
LMLP07A7M1R0DTAS
LMLP07A7M1R5DTAS
LMLP07A7M2R2DTAS
LMLP07A7M3R3DTAS
LMLP07A7M4R7DTAS
LMLP07A7M5R6DTAS
LMLP07A7M6R8DTAS
LMLP07A7M8R2DTAS
LMLP07A7M100DTAS
0.22
0.33
0.47
0.56
0.68
0.82
1
1.5
2.2
3.3
4.7
5.6
6.8
8.2
10
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
DCR (mΩ)
Typical
2.5
3.5
4
4.7
5
6.7
9
14
17
28
37
40
54
54
62
DCR (mΩ)
Max
2.8
3.9
4.2
5
5.5
8
10
15
20
30
40
44
60
60
68
Isat (A)
Typical
70
45
40
34
30
29
26
24
22
21
17
16
15
14
10
9
8
7
6
5
3.5
3
07A7
I DC (A) Typical
ISAT: The current that causes an inductance drop of approximately 25% (30% on 0405 size).
IDC: DC Current that causes an approximate ΔT of 40ºC.
60
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
23
20
17.5
16.5
15.5
13
11
9
8
6
5.5
5.5
4.5
4.5
4
Isat (A)
Typical
40
30
26
25.5
25
20
20
16
12
10
7
6
6.5
6
5.5
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
07C7
Part Number
Inductance (μH)
Tolerance
Test Condition
DCR (mΩ)
Typical
DCR (mΩ)
Max
I DC (A) Typical
LMLP07C7MR33DTAS
LMLP07C7MR40DTAS
LMLP07C7MR47DTAS
LMLP07C7MR56DTAS
LMLP07C7MR60DTAS
LMLP07C7MR68DTAS
LMLP07C7MR82DTAS
LMLP07C7M1R0DTAS
LMLP07C7M1R2DTAS
LMLP07C7M1R5DTAS
LMLP07C7M1R8DTAS
LMLP07C7M2R2DTAS
LMLP07C7M3R3DTAS
LMLP07C7M4R7DTAS
LMLP07C7M5R6DTAS
LMLP07C7M6R8DTAS
LMLP07C7M8R2DTAS
LMLP07C7M100DTAS
LMLP07C7M150DTAS
LMLP07C7M220DTAS
LMLP07C7M330DTAS
LMLP07C7M470DTAS
LMLP07C7M560DTAS
LMLP07C7M680DTAS
0.33
0.4
0.47
0.56
0.6
0.68
0.82
1
1.2
1.5
1.8
2.2
3.3
4.7
5.6
6.8
8.2
10
15
22
33
47
56
68
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
2.5
3.1
3.5
3.6
3.8
4
4.6
6.1
6.7
8.6
9.5
11.2
19
28
43.5
46
56
60
81
140
173
290
342
386
3
3.7
3.9
4.2
4.3
4.5
4.9
6.5
7.5
9
11
12
20.9
30.8
49
51.5
63
69
92
170
200
330
396
445
25
23
22
20
19
18
15
15
14
12
12
10
8
6.5
6
5.5
5
4
3.5
2.5
2
1.9
1.6
1.2
Part Number
Inductance (μH)
Tolerance
Test Condition
LMLP1011MR22DTAS
LMLP1011MR36DTAS
LMLP1011MR47DTAS
LMLP1011MR56DTAS
LMLP1011MR68DTAS
LMLP1011M1R0DTAS
LMLP1011M1R5DTAS
LMLP1011M2R2DTAS
LMLP1011M3R3DTAS
LMLP1011M4R7DTAS
LMLP1011M6R8DTAS
LMLP1011M8R2DTAS
LMLP1011M100DTAS
LMLP1011M150DTAS
LMLP1011M220DTAS
LMLP1011M470DTAS
0.22
0.36
0.47
0.56
0.68
1
1.5
2.2
3.3
4.7
6.8
8.2
10
15
22
47
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
DCR (mΩ)
Typical
0.8
1.1
1.3
1.6
2.4
3
3.8
6.7
10.8
17
22.5
26
27
40
60
130
DCR (mΩ)
Max
1
1.2
1.55
1.8
2.7
3.3
4.2
7
11.8
20
25
29
30
45
66
145
Isat (A)
Typical
32
31
30
27
25
24
22
20
18
16.5
15
14
12
10
9
8.5
8
7.5
6
5.5
3.5
2.7
2.1
2
1011
I DC (A) Typical
30
34
25
25
22
18
16
12
10
8.5
6.5
7
7.5
6.25
5
3.3
Isat (A)
Typical
50
40
35
32
30
28
21
18
16
15
9
9
8.5
7
5.5
3.5
ISAT: The current that causes an inductance drop of approximately 25% (30% on 0405 size).
IDC: DC Current that causes an approximate ΔT of 40ºC.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
61
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
1313
Part Number
Inductance (μH)
Tolerance
Test Condition
DCR (mΩ)
Typical
DCR (mΩ)
Max
I DC (A) Typical
LMLP1313MR10DTAS
LMLP1313MR22DTAS
LMLP1313MR33DTAS
LMLP1313MR47DTAS
LMLP1313MR56DTAS
LMLP1313MR68DTAS
LMLP1313MR82DTAS
LMLP1313M1R0DTAS
LMLP1313M1R2DTAS
LMLP1313M1R5DTAS
LMLP1313M1R8DTAS
LMLP1313M2R2DTAS
LMLP1313M3R3DTAS
LMLP1313M4R7DTAS
LMLP1313M5R6DTAS
LMLP1313M6R8DTAS
LMLP1313M7R8DTAS
LMLP1313M8R2DTAS
LMLP1313M100DTAS
0.1
0.22
0.33
0.47
0.56
0.68
0.82
1
1.2
1.5
1.8
2.2
3.3
4.7
5.6
6.8
7.8
8.2
10
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
0.53
0.64
0.85
1.1
1.3
1.5
2
2.1
2.8
3.4
4.2
4.6
7.7
12.8
14
15.4
17.2
18.9
21.4
0.6
0.8
1.1
1.3
1.5
1.7
2.3
2.5
3.5
4.1
4.9
5.5
9.2
15
16.5
18.5
20.5
22.5
25.5
55
51
42
38
36
34
31
29
25
23
19
20
15
12
11.5
11
10
9.5
9
Part Number
Inductance (μH)
Tolerance
Test Condition
LMLP13B3MR10DTAS
LMLP13B3MR15DTAS
LMLP13B3MR22DTAS
LMLP13B3MR30DTAS
LMLP13B3MR33DTAS
LMLP13B3MR47DTAS
LMLP13B3MR56DTAS
LMLP13B3MR68DTAS
LMLP13B3MR82DTAS
LMLP13B3M1R0DTAS
LMLP13B3M1R2DTAS
LMLP13B3M1R5DTAS
LMLP13B3M1R8DTAS
LMLP13B3M2R2DTAS
LMLP13B3M3R3DTAS
LMLP13B3M4R7DTAS
LMLP13B3M5R6DTAS
LMLP13B3M6R8DTAS
LMLP13B3M8R2DTAS
LMLP13B3M100DTAS
LMLP13B3M150DTAS
LMLP13B3M220DTAS
LMLP13B3M330DTAS
LMLP13B3M470DTAS
LMLP13B3M680DTAS
0.1
0.15
0.22
0.3
0.33
0.47
0.56
0.68
0.82
1
1.2
1.5
1.8
2.2
3.3
4.7
5.6
6.8
8.2
10
15
22
33
47
68
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
100KHz, 0.25V
DCR (mΩ)
Typical
0.47
0.53
0.63
0.7
0.83
1
1.2
1.4
1.6
1.7
2.1
2.5
2.8
3.5
5.7
9.3
11.8
13.1
14.5
15.8
25
34
55
80
122
DCR (mΩ)
Max
0.5
0.6
0.7
0.8
0.9
1.2
1.4
1.6
1.9
2
2.5
3
3.2
4.2
6.8
11.2
12.8
14
15.5
16.8
29
39.5
65
92
134
Isat (A)
Typical
118
110
80
65
55
54
53
50
49
48
40
32
32
27
22
21
18
18
16
13B3
I DC (A) Typical
ISAT: The current that causes an inductance drop of approximately 25% (30% on 0405 size).
IDC: DC Current that causes an approximate ΔT of 40ºC.
62
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102720
– smd power inductors –
60
55
53
48
46
41
37
35
33
32
30
27
24
22
18
13.5
12
11.5
10.5
10
6
5
4
3
2
Isat (A)
Typical
120
118
112
72
65
63
62
60
50
49
48
45
41
40
35
30
26.5
16.5
16
15.5
9
7.5
6
5
3.5
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
GENERAL CHARACTERISTICS
Items
Solderability
Solder Heat
Resistance
Requirement
More than 90% of the terminal electrode should be
covered with solder.
Inductance value must remain within 20% of initial
value. No disconnection or short circuit. No change
in appearance.
Heat Resistance
Inductance value must remain within 20% of initial
value. No disconnection or short circuit.No change
in appearance.
Cold Resistance
Inductance value must remain within 20% of initial
value. No disconnection or short circuit.No change
in appearance.
Thermal Shock
Inductance value must remain within 20% of initial
value. No disconnection or short circuit.No change
in appearance.
Humidity Resistance
Inductance value must remain within 20% of initial
value. No disconnection or short circuit. No change
in appearance.
Vibration Test
Inductance value must remain within ±5% of initial
value. No change in appearance
Test Methods
230±5°C for 4±1 seconds
260±5°C for 4±1 seconds
Temperature: 125±5°C
Time: 500 hours
Tested after 2 hours at room temperature
Temperature: -40±5°C
Time: 500 hours
Tested after 2 hours at room temperature
One Cycle
Step
1
2
3
4
Temperature (°C)
-40±5°C
30
Room Temperature
3
125±5°C
30
Room Temperature
3
Temperature:
40±2°C at 90~95% relative humidity .
Time: 500 Hours
Tested after 2 hours at room temperature
After 1 hour of vibrations testing, in each of three
orientations at 10Hz, then increase to 55Hz, then
decrease to 10Hz with 1.52mm P-P amplitudes.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
Time (min.)
63
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-R22
L&I Curve
R22
0.250
125
105
0.200
0.150
65
45
0.100
TEMPERATURE (°C)
INDUCTANCE (µH)
85
25
0.050
5
0.000
0
5
10
15
20
25
30
35
40
45
-15
DC Current (A)
LMLP07A7M-R33
L&I Curve
125
0.3
105
0.25
85
0.2
65
0.15
45
0.1
25
0.05
5
0
0
5
10
15
20
25
30
35
40
45
DC Current (A)
64
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
-15
TEMPERATURE (°C)
INDUCTANCE (µH)
R33
0.35
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-R47
L&I Curve
100
0.45
90
0.4
80
0.35
70
0.3
60
0.25
50
0.2
40
0.15
30
0.1
20
0.05
10
0
0
5
10
15
20
25
30
35
40
45
TEMPERATURE (°C)
INDUCTANCE (µH)
R47
0.5
0
DC Current (A)
LMLP07A7M-R68
L&I Curve
R68
0.7
105
0.6
85
0.5
0.4
45
0.3
TEMPERATURE (°C)
INDUCTANCE (µH)
65
25
0.2
5
0.1
0
0
5
10
15
20
25
30
35
40
45
-15
DC Current (A)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
65
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-R82
L&I Curve
R82
0.9
110
0.8
90
0.7
70
0.5
50
0.4
0.3
TEMPERATURE (°C)
INDUCTANCE (µH)
0.6
30
0.2
10
0.1
0
0
5
10
15
20
25
30
35
-10
DC Current (A)
LMLP07A7M-1R0
L&I Curve
1R0
1.000
120
0.900
100
0.800
0.700
0.600
0.500
60
0.400
40
0.300
0.200
20
0.100
0.000
0
5
10
15
20
25
30
DC Current (A)
66
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
0
TEMPERATURE (°C)
INDUCTANCE (µH)
80
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-1R5
L&I Curve
1R5
110
1.600
1.400
90
1.200
0.800
50
0.600
TEMPERATURE (°C)
INDUCTANCE (µH)
70
1.000
30
0.400
10
0.200
0.000
0
5
10
15
20
25
-10
DC Current (A)
LMLP07A7M-2R2
L&I Curve
2R2
2.500
120
100
2.000
1.500
60
1.000
TEMPERATURE (°C)
INDUCTANCE (µH)
80
40
0.500
20
0.000
0
5
10
15
20
0
DC Current (A)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
67
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-3R3
L&I Curve
3R3
3.300
125
3.000
105
2.700
85
2.100
65
1.800
1.500
45
1.200
TEMPERATURE (°C)
INDUCTANCE (µH)
2.400
25
0.900
0.600
5
0.300
0.000
0
5
10
15
-15
20
DC Current (A)
LMLP07A7M-4R7
L&I Curve
4R7
4.500
140
4.000
120
3.500
100
80
2.500
2.000
60
1.500
40
1.000
20
0.500
0.000
0
1
2
3
4
5
6
7
8
9
10
DC Current (A)
68
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
0
TEMPERATURE (°C)
INDUCTANCE (µH)
3.000
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-6R8
L&I Curve
6R8
41
8
36
7
31
6
21
4
16
3
TEMPERATURE (°C)
INDUCTANCE (µH)
26
5
11
2
6
1
0
1
0
1
2
3
4
5
6
7
8
9
-4
10
DC Current (A)
LMLP07A7M-8R2
L&I Curve
8R2
66
8
7.8
56
7.6
7.4
36
7.2
26
7
TEMPERATURE (°C)
INDUCTANCE (µH)
46
16
6.8
6
6.6
6.4
0
1
2
3
4
5
6
-4
DC Current (A)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
69
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-100
L&I Curve
100
12
77
67
10
57
47
6
37
27
TEMPERATURE (°C)
INDUCTANCE (µH)
8
4
17
2
7
0
0
1
2
3
4
5
-3
DC Current (A)
LMLP07A7M-R22
I&T Curve
R22
0.250
125
105
0.200
0.150
65
45
0.100
25
0.050
5
0.000
0
5
10
15
20
25
30
35
40
45
DC Current (A)
70
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
-15
TEMPERATURE (°C)
INDUCTANCE (µH)
85
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-R33
I&T Curve
125
0.3
105
0.25
85
0.2
65
0.15
45
0.1
25
0.05
5
0
0
5
10
15
20
25
30
35
40
45
TEMPERATURE (°C)
INDUCTANCE (µH)
R33
0.35
-15
DC Current (A)
LMLP07A7M-R47
I&T Curve
R47
0.7
101
0.6
81
0.5
0.4
41
0.3
TEMPERATURE (°C)
INDUCTANCE (µH)
61
21
0.2
1
0.1
0
0
9
18
27
36
45
-19
DC Current (A)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
71
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-R68
I&T Curve
R68
0.9
100
0.8
0.7
80
60
0.5
0.4
40
TEMPERATURE (°C)
INDUCTANCE (µH)
0.6
0.3
0.2
20
0.1
0
0
5
10
15
20
25
30
35
40
45
0
DC Current (A)
LMLP07A7M-R82
I&T Curve
R82
1
100
0.9
0.8
80
0.6
60
0.5
0.4
40
0.3
0.2
20
0.1
0
0
5
10
15
20
25
30
35
DC Current (A)
72
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
0
TEMPERATURE (°C)
INDUCTANCE (µH)
0.7
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-1R0
I&T Curve
1R0
120
1.000
100
0.800
0.600
60
TEMPERATURE (°C)
INDUCTANCE (µH)
80
0.400
40
0.200
0.000
20
0
5
10
15
20
25
30
0
DC Current (A)
LMLP07A7M-1R5
I&T Curve
1R5
1.800
100
1.600
80
1.400
60
1.000
0.800
40
TEMPERATURE (°C)
INDUCTANCE (µH)
1.200
0.600
0.400
20
0.200
0.000
0
5
10
15
20
25
0
DC Current (A)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
73
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-2R2
I&T Curve
2R2
120
2.000
100
60
1.000
TEMPERATURE (°C)
INDUCTANCE (µH)
80
1.500
40
0.500
20
0.000
0
5
10
15
20
0
DC Current (A)
LMLP07A7M-3R3
I&T Curve
3R3
3.500
120
3.000
100
80
2.000
60
1.500
40
1.000
20
0.500
0.000
0
5
10
15
20
DC Current (A)
74
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
0
TEMPERATURE (°C)
INDUCTANCE (µH)
2.500
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-4R7
I&T Curve
4R7
4.500
120
4.000
3.500
100
INDUCTANCE (µH)
80
2.500
60
2.000
TEMPERATURE (°C)
3.000
1.500
40
1.000
20
0.500
0.000
0
2
4
6
8
0
10
DC Current (A)
LMLP07A7M-6R8
I&T Curve
6R8
8
40
7
35
30
5
25
4
20
3
15
2
10
1
5
0
0
2
4
8
10
TEMPERATURE (°C)
INDUCTANCE (µH)
6
0
DC Current (A)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
75
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP07A7M-8R2
I&T Curve
8R2
8
60
7
50
40
5
4
30
TEMPERATURE (°C)
INDUCTANCE (µH)
6
3
20
2
10
1
0
0
1
2
3
4
0
5
DC Current (A)
LMLP07A7M-100
I&T Curve
100
10
70
60
8
INDUCTANCE (µH)
6
40
30
4
20
2
10
0
0
1
2
3
4
5
0
DC Current (A)
76
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
TEMPERATURE (°C)
50
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP1011M-R36
L&I Curve
R36
75
0.4
65
0.3
55
0.25
45
0.2
35
0.15
25
0.1
15
ΔT (°C)
0.05
0
0
TEMPERATURE (°C)
INDUCTANCE (µH)
L (µH)
0.35
5
10
20
30
40
50
60
-5
DC Current (A)
LMLP1011M-R47
L&I Curve
R47
0.500
80
L (µH)
0.450
70
0.400
60
50
0.300
0.250
40
0.200
30
TEMPERATURE (°C)
INDUCTANCE (µH)
0.350
0.150
20
0.100
10
0.050
0.000
ΔT (°C)
0
10
20
30
40
50
60
0
DC Current (A)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
77
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP1011M-R56
L&I Curve
R56
0.6
80
L (µH)
70
0.5
60
50
0.3
40
30
TEMPERATURE (°C)
INDUCTANCE (µH)
0.4
0.2
20
0.1
10
ΔT (°C)
0
0
10
20
30
40
50
0
DC Current (A)
LMLP1011M-R68
L&I Curve
R68
0.8
80
L (µH)
0.7
70
0.6
0.5
50
0.4
40
0.3
30
0.2
20
0.1
10
ΔT (°C)
0
0
10
20
30
40
50
DC Current (A)
78
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
0
TEMPERATURE (°C)
INDUCTANCE (µH)
60
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP1011M-1R0
L&I Curve
1R0
1.2
100
L (µH)
1
80
60
0.6
40
TEMPERATURE (°C)
INDUCTANCE (µH)
0.8
0.4
20
0.2
ΔT (°C)
0
0
10
20
30
40
50
0
DC Current (A)
LMLP1011M-1R5
L&I Curve
1R5
1.600
120
L (µH)
1.400
100
1.000
80
0.800
60
0.600
TEMPERATURE (°C)
INDUCTANCE (µH)
1.200
40
0.400
20
0.200
ΔT (°C)
0.000
0
5
10
15
20
25
30
0
DC Current (A)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
79
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP1011M-R36
I&T Curve
R36
75
0.4
65
0.3
55
0.25
45
0.2
35
0.15
25
0.1
15
ΔT (°C)
0.05
0
0
TEMPERATURE (°C)
INDUCTANCE (µH)
L (µH)
0.35
5
10
20
30
40
50
60
-5
DC Current (A)
LMLP1011M-R47
I&T Curve
R47
0.500
83
0.450
73
0.400
63
0.350
0.300
43
0.250
33
0.200
23
0.150
13
0.100
ΔT (°C)
3
0.050
0.000
0
10
20
30
40
50
60
DC Current (A)
80
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
-7
TEMPERATURE (°C)
INDUCTANCE (µH)
53
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP1011M-R56
I&T Curve
R56
80
0.6
70
0.5
60
50
40
0.3
30
TEMPERATURE (°C)
INDUCTANCE (µH)
0.4
0.2
20
0.1
10
ΔT (°C)
0
0
5
10
15
20
25
30
35
40
45
50
0
DC Current (A)
LMLP1011M-R68
I&T Curve
R68
90
0.8
80
0.7
70
0.6
50
0.4
40
0.3
TEMPERATURE (°C)
INDUCTANCE (µH)
60
0.5
30
0.2
20
0.1
10
ΔT (°C)
0
0
5
10
15
20
25
30
35
40
45
50
0
DC Current (A)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
81
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
LMLP1011M-1R0
I&T Curve
1R0
1.2
100
1
80
60
0.6
40
TEMPERATURE (°C)
INDUCTANCE (µH)
0.8
0.4
20
0.2
0
ΔT (°C)
0
5
10
15
20
25
30
35
40
45
50
0
DC Current (A)
LMLP1011M-1R5
I&T Curve
1R5
1.600
120
1.400
100
1.000
80
0.800
60
0.600
40
0.400
ΔT (°C)
0.200
0.000
0
20
5
10
15
20
25
30
DC Current (A)
82
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
021420
– smd power inductors –
0
TEMPERATURE (°C)
INDUCTANCE (µH)
1.200
LMax Low Profile/High Current
Power Inductor
LMLP Series – Style D
THE FORCE FOR TEARING OFF COVER TAPE IS
10 TO 60 GRAMS IN THE ARROW DIRECTION
165 TO 180º
COVER TAPE
LABEL
CARRIER TAPE
ELECTRODE
DIRECTION OF EED
REEL
TAPE TRAILER
160 (6.299) MIN
TAPE LEADER
388 (15.28) MIN
INDUCTORS
1.50 +0.10
-0.00
1.75±0.10
(0.059 +0.004
-0.000 )
(0.069±0.004)
4.00±0.10
(0.157±0.004)
COVER TAPE
250 (9.843) MIN
P
330 (13.00) or 178 (7.000)
W
LABEL
2.50±0.50
(0.098±0.020)
120º
23.0±1.00
(0.906±0.039)
Size Code
0405
05A6
0506
0707
07B7
07A7
07C7
1011
1313
13B3
Tape Size (mm)
W
P
12
8
12
8
12
8
16
12
16
12
16
12
16
12
24
16
24
16
24
20
M
ZOO
13.0±1.00
(0.512±0.039)
Reel
Size
SPQ
13" Reel
13" Reel
13" Reel
13" Reel
13" Reel
13" Reel
13" Reel
13" Reel
13" Reel
13" Reel
2000
3000
2000
1500
1500
1000
800
500
500
400
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
031020
– smd power inductors –
83
FOLLOW US:
visit us at www.kyocera-avx.com
North America
Tel: +1 864-967-2150
Central America
Tel: +55 11-46881960
Europe
Tel: +44 1276-697000
Asia
Tel: +65 6286-7555
Japan
Tel: +81 740-321250
