LP0603A0902ALTR

Thin-Film RF/Microwave Filters Low Pass – Harmonic Lead-Free LP0603 Series – LGA Termination GENERAL DESCRIPTION • • • • • The LP0603 ITF (Integrated Thin Film) Lead-Free LGA Low Pass Filter is based on thin-film multilayer technology. The technology provides a miniature part with excellent high frequency performance and rugged construction for reliable automatic assembly. The ITF Low Pass Filters are offered in a variety of frequency bands compatible with various types of high frequency wireless systems. LAND GRID ARRAY ADVANTAGES • • • • • FEATURES • • • • • • • • • Satellite TV receivers GPS Vehicle location systems Wireless LANs RFID Miniature Size: 0603 Frequency Range: 900MHz-5.5HGz Characteristic Impedance: 50 Ohm Operating/Storage Temperature: -40°C to +85°C Power Rating: 3W Continuous Low Profile Rugged Construction Lead Free Taped and Reeled Inherent Low Profile Self Alignment during Reflow Excellent Solderability Low Parasitics Better Heat Dissipation APPLICATIONS • Mobile communications HOW TO ORDER LP 0603 Style Size 0603 A XXXX A N TR Type Frequency Sub-Type Termination Taped & Reeled A or N MHz LGA **Ni/Lead Free Solder **RoHS compliant FINAL QUALITY INSPECTION Finished parts are 100% tested for electrical parameters and visual characteristics. Each production lot is evaluated on a sample basis for: • Static Humidity: 85°C, 85% RH, 160 hours • Endurance: 125°C, IR, 4 hours TERMINATION LEAD-FREE COMPATIBLE COMPONENT Nickel/Lead-Free Solder coating compatible with automatic soldering technologies: reflow, wave soldering, vapor phase and manual. 116 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 081320 Thin-Film RF/Microwave Filters Low Pass – Lead-Free LP0603 Series – LGA Termination DIMENSIONS: millimeters (inches) (Bottom View) TERMINALS AND ORIENTATION IN TAPE (TOP VIEW) S B A IN GND IN GND OUT GND OUT GND L T RECOMMENDED PAD LAYOUT (MM) W L 1.6±0.1 (0.063±0.004) A 0.25±0.05 (0.010±0.002) W 0.84±0.1 (0.033±0.004) B 0.20±0.05 (0.008±0.002) T 0.60±0.1 (0.024±0.004) S 0.05±0.05 (0.002±0.002) ELECTRICAL CHARACTERISTICS (Guaranteed over –40°C to +85°C Operating Temperature Range) P/N Frequency Band [MHz] I. Loss [dB] VSWR max [dB] Attentuation t yp. [dB] LP0603A0902ANTR 890-915 0.35 typ (0.5 max) 1.4 25 @ 2xF0 14 @ 3xF0 LP0603A0947ANTR 935-960 0.35 typ (0.5 max) 1.4 25 @ 2xF0 17 @ 3xF0 LP0603A1747ANTR 1710-1785 0.3 typ (0.5 max) 1.4 25 @ 2xF0 17 @ 3xF0 LP0603A1842ANTR 1805-1880 0.3 typ (0.5 max) 1.4 27 @ 2xF0 15 @ 3xF0 LP0603A1880ANTR 1840-1920 0.3 typ (0.5 max) 1.4 25 @ 2xF0 17 @ 3xF0 LP0603A1950ANTR 1920-1980 0.3 typ (0.5 max) 1.4 27 @ 2xF0 15 @ 3xF0 LP0603A2140ANTR 2110-2170 0.3 typ (0.5 max) 1.4 27 @ 2xF0 17 @ 3xF0 LP0603A2442ANTR 2412-2472 0.3 typ (0.5 max) 1.4 25 @ 2xF0 17 @ 3xF0 LP0603N3500ANTR 3400-3600 -0.3 typ. -0.5 max. 1.4 30 @ 2xF0 20 @ 3xF0 LP0603N5200ANTR 5050-5350 -0.2 typ. -0.5 max. 1.4 30 @ 2xF0 20 @ 3xF0 LP0603N5500ANTR 5350-5650 -0.2 typ. -0.5 max. 1.4 30 @ 2xF0 20 @ 3xF0 NOTE: Additional Frequencies Available Upon Request The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012419 117 Thin-Film RF/Microwave Filters Low Pass – Lead-Free LP0603 Series – LGA Termination LP0603A0947ANTR LP0603A0902ANTR 0 0 F0 F0 -13 -13 3F0 S21 S11 -25 (dB) 2F0 -38 -50 0 3F0 S21 S11 -25 (dB) 2F0 -38 -50 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 0 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 Frequency (GHz) Frequency (GHz) LP0603A1747ANTR LP0603A1842ANTR 0 0 F0 F0 -13 -13 S21 S11 -25 (dB) -38 -50 S21 S11 -25 (dB) 3F0 -38 2F0 0 3F0 -50 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 2F0 0 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 Frequency (GHz) Frequency (GHz) LP0603A1880ANTR LP0603A1950ANTR 0 0 F0 -5 F0 -10 -13 -15 S21 -20 S11 -25 (dB) -30 3F0 S21 S11 -25 (dB) 3F0 -35 2F0 -38 -40 2F0 -45 -50 0 -50 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 Frequency (GHz) 118 0 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 Frequency (GHz) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012419 Thin-Film RF/Microwave Filters Low Pass – Lead-Free LP0603 Series – LGA Termination LP0603A2140ANTR LP0603A2442ANTR 0 0 -5 F0 -5 -15 -15 S21 -20 S11 -25 (dB) -30 S21 -20 S11 -25 (dB) -30 3F0 -35 -35 -40 -40 2F0 -45 -50 F0 -10 -10 0 3F0 2F0 -45 -50 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 0 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 Frequency (GHz) Frequency (GHz) LP0603N3500ANTR LP0603N5200ANTR 0 0 F0 -5 -15 -15 S21 -20 S11 -25 (dB) -30 S21 -20 S11 -25 (dB) -30 3F0 -35 -35 -40 -40 2F0 -45 -50 F0 -5 -10 -10 0 1 2 3 4 5 6 7 2F0 -45 8 9 10 11 12 -50 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Frequency (GHz) Frequency (GHz) LP0603N5500ANTR 0 -5 F0 -10 -15 S21 -20 S11 -25 (dB) -30 -35 2F0 -40 -45 -50 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Frequency (GHz) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012419 119 Thin-Film RF/Microwave Filters Low Pass – Lead-Free LP0603 Series – Test Jig TEST JIG FOR LP0603 LEAD-FREE LGA LOW PASS FILTER GENERAL DESCRIPTION Solder the filter to the measurement jig as follows: These jigs are designed for testing the LP0603 LGA Low Pass Filters using a Vector Network Analyzer. They consist of a dielectric substrate, having 50Ω microstrips as conducting lines and a bottom ground plane located at a distance of 0.127mm from the microstrips. The substrate used is Neltec’s NH9338ST0127C1BC (or similar). The connectors are SMA type (female), ‘Johnson Components Inc.’ Product P/N: 142-0701-841 (or similar). Input (Filter) Output (Filter) ç Connector 1 (Jig) GND (Filter) ç GND (Jig) ç Connector 2 (Jig) GND (Filter) ç GND (Jig) Set the VNA to the relevant frequency band. Connect the VNA using a 10dB attenuator on the jig terminal connected to port 2 (using an RF cable). Both a measurement jig and a calibration jig are provided. The calibration jig is designed for a full 2-port calibration, and consists of an open line, short line and through line. LOAD calibration can be done by a 50Ω SMA termination. MEASUREMENT PROCEDURE Follow the VNA’s instruction manual and use the calibration jig to perform a full 2-Port calibration in the required bandwidths. Measurement Connector 1 Calibration Jig Short line to GND Open line Connector Johnson P/N 152-0701-841 Connector 2 120 Load & Through Load & OUT The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012419