LP0805A2442AWTR

Thin-Film RF/Microwave Filters Low Pass – Harmonic LP0805 Series – SMD Termination DIMENSIONS: millimeters (inches) GENERAL DESCRIPTION The ITF (Integrated Thin-Film) SMD Filter is based on thin-film multilayer technology. The technology provides a miniature part with excellent high frequency performance and rugged construction for reliable automatic assembly. L 2.03±0.1 (0.080±0.004) W 1.55±0.1 (0.061±0.004) T 1.02±0.1 (0.040±0.004) FEATURES A 0.56±0.25 (0.022±0.010) • Frequency Range: 800MHz - 3.5GHz B 0.35±0.15 (0.014±0.006) The ITF Filter is offered in a variety of frequency bands compatible with various types of high frequency wireless systems. • Small Size: 0805 • Characteristic Impedance: 50Ω • Operating / Storage Temp.: -40°C to +85°C • Power Rating: 3W Continuous PAD LAYOUT See CP0805 pad layout on page 64. • Low Profile • Rugged Construction FINAL QUALITY INSPECTION • Taped and Reeled Finished parts are 100% tested for electrical parameters and visual/ mechanical characteristics. Each production lot is evaluated on a sample basis for: APPLICATIONS • • • • • Mobile Communications Satellite TV Receivers GPS Vehicle Location Systems Wireless LAN’s • Static Humidity: 85°C, 85% RH, 160 hours • Endurance: 125°C, IR 4 hours TERMINATION Nickel/Solder coating (Sn, Pb) compatible with automatic soldering technologies: reflow, wave soldering, vapor phase and manual. HOW TO ORDER LP 0805A 0902 Style Size Frequency Low Pass 0805 AW TR Termination Taped & Reeled AW = Nickel/Solder (SnPb) **AS = Nickel/ Lead Free Solder (Sn100) MHz TR = Tape and Reel Not RoHS Compliant **RoHS compliant TERMINALS AND LAYOUT (TOP VIEW) ORIENTATION IN TAPE TYPE A For RoHS compliant products, please select correct termination style. TYPE D GND IN TYPE E GND TYPE F (Sn100) GND IN GND IN MARKING CODE A IN LEAD-FREE COMPATIBLE COMPONENT OUT GND OUT GND OUT GND OUT GND The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012419 121 Thin-Film RF/Microwave Filters Low Pass – Harmonic LP0805 Series – SMD Termination ELECTRICAL CHARACTERISTICS Part Number Application E-G SM GSM AM PS PCN PCS Frequency Band (MHz) I. Loss max VSWR max Attenuation (dB) Typical Layout Type (SnPb) Layout Type F Marking Code E LP0805A0897AS 880 - 915 A LP0805A0942AS 925 - 960 A F LP0805A0902AS 890 - 915 A E LP0805A0947AS 935 - 960 A F LP0805A1119AS 1101 - 1137 A H LP0805A0836AS 824 - 849 A A LP0805A0881AS 869 - 894 A C LP0805A1747AS 1710 - 1785 LP0805A1842AS 1805 - 1880 0.4dB (0.3dB typ) 30 @ 2XFo 20 @ 3xFo 1.7 D I D J LP0805A1880AS 1850 - 1910 D K LP0805A1960AS 1930 - 1990 D M PHP LP0805A1907AS 1895 - 1920 D L DECT LP0805A1890AS 1880 - 1900 D K N 3G LP0805A2150AS 1905 - 2180 D Wireless LAN LP0805A2442AS 2400 - 2484 D S WLL LP0805A3500AS 3400 ~ 3600 E X Typical Electrical Performance Fo Fo -10 -20 3Fo -40 2Fo -50 -30 dB dB -30 -40 1 1.5 2 2.5 3 3.5 0.5 1 1.5 2 Fo 2Fo 3Fo -50 -60 2 2.5 3 3.5 3Fo 1 2 3 LP0805A1950ASTR 5 6 7 8 9 2Fo 2 3 5 6 7 8 9 3Fo -30 -40 2 3 4 5 6 7 8 9 -70 0 10 1 2 3 4 5 6 Fo -10 -20 -20 -30 dB 3Fo 2Fo -50 -30 3Fo -40 2Fo -50 -60 -60 0.5 1 1.5 2 10 2Fo LP0805A2150ASTR 0 Fo 0 9 3Fo -40 2.5 3 3.5 -70 4 Frequency (GHz) 0 1 2 3 4 5 6 7 8 9 10 Frequency (GHz) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012419 7 8 Frequency (GHz) LP0805A1119ASTR -70 8 -60 2Fo 1 0 -40 7 -30 Frequency (GHz) -10 6 -50 -70 0 10 5 -20 Frequency (GHz) dB 4 Fo -10 -60 4 3 LP0805A3500ASTR -50 -50 1 2 0 dB dB 3Fo -60 1 Frequency (GHz) -20 -40 4 2Fo -70 0 10 Fo -10 -30 3.5 3Fo -40 LP0805A2442ASTR -20 3 -60 4 0 -10 -30 Frequency (GHz) Fo 2.5 -50 2Fo -70 0 4 2 -20 -40 -60 1.5 1.5 Fo -10 -30 -50 1 1 LP0805A1842ASTR dB -30 0.5 0.5 Frequency (GHz) -20 0 122 -70 0 4 Fo -10 dB dB 3.5 0 Frequency (GHz) dB 3 0 -20 -70 0 2.5 LP0805A1747ASTR LP0805A0967ASTR -40 2Fo Frequency (GHz) 0 -10 3Fo -40 -60 -70 0 4 -30 -50 -60 0.5 Frequency (GHz) -70 0 3Fo 2Fo -50 -60 Fo -10 -20 -20 dB 0 0 -10 -70 0 LP0805A0902ASTR LP0805A0881ASTR LP0805A0836ASTR 0 9 10 11 12 13 Thin-Film RF/Microwave Filters Low Pass – Harmonic LP0805 Series – Test Jig ITF TEST JIG FOR LOW PASS FILTER 0805 GENERAL DESCRIPTION These jigs are designed for testing the LPF0805 Low Pass Filters using a Vector Network Analyzer. Solder the filter to the measurement jig as follows: They consist of a dielectric substrate, having 50W microstrips as conducting lines and a bottom ground plane located at a distance of 0.254 mm from the microstrips. Input The substrate used is RF-35-0100-C1B107 (or similar). Output The connectors are SMA type (female), ‘Johnson Components Inc.’ Product P/N: 142-0701-841(or similar). (Filter) Both a measurement jig and a calibration jig are provided. Set the VNA to the relevant frequency band. Connect the VNA using a 10dB attenuator on the jig terminal connected to port 2 (using an RF cable). The calibration jig is designed for a full 2-port calibration, and consists of an open line, short line and through line. LOAD calibration can be done by a 50W SMA termination. (Filter) ç Connector 1 (Jig) GND (Filter) ç GND (Jig) ç Connector 2 (Jig) GND (Filter) ç GND (Jig) MEASUREMENT PROCEDURE Follow the VNA’s instruction manual and use the calibration jig to perform a full 2-Port calibration in the required bandwidths. Measurement Connector 1 Calibration Jig Short line to GND Open line Connector Johnson P/N 142-0701-841 Connector 2 Load Through Load Through The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012419 123