M39006/33-0008

TWA SERIES MIL-PRF-39006/33 Series – Military Conventional Wet Tantalum GENERAL DESCRIPTION This data sheet contains the MIL-PRF-39006 ratings for which KYOCERA AVX is a qualified approved supplier. This will be continually updated as the qualification expands. This design is an axial leaded tubular case. It includes a welded tantalum can and header assembly that provides a hermetic seal to withstand harsh environments. The 1000 hour failure rates of 1%, 0.1% and 0.01% correspond to “M”, “P”, and “R” respectively. For details on testing conditions please refer to MIL-PRF-39006. OUTLINE DIMENSIONS E L CURRENTLY QUALIFIED M39006 RATINGS INCLUDE T3-T4 CASE SIZE: W E M39006/33 F M Level Reliability Dashes P Level Reliability Dashes 25V-75V 25V-75V D Terminal welded to case (T) F 6.35 (0.250) W 0.64 +0.05 (.025 +.002) T 2.380 (.094) Case CASE DIMENSIONS: Millimeters (inches) DLA Case Size Case Size L +0.79 (0.031) -0.41 (0.016) D Basic Case ±0.41 (0.016) D Insulated Case Max E ±6.35 (0.250) T3 T4 D E 19.46 (0.766) 26.97 (1.062) 9.52 (0.375) 9.52 (0.375) 10.31 (0.406) 10.31 (0.406) 57.15 (2.250) 57.15 (2.250) VOLTAGE RATINGS (Operating Temperature -55ºC to 125ºC) Voltage (DC) Rated Voltage: (Vr) Derated Voltage: (Vc) Surge Voltage: (Vs) 85ºC 125ºC 85ºC 6 4 6.9 8 5 9.2 10 6 11.5 15 10 17.3 25 15 28.8 30 20 34.5 50 30 57.5 60 40 69 75 50 86.3 100 65 115 HOW TO ORDER MILITARY M39006 PART NUMBER: M39006 /33 –0050 Type / Military Designator Specification Sheet Number Dash Number 106 Not RoHS Compliant The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 062920 – high reliability tantalum capacitors – 125 85 144 TWA SERIES MIL-PRF-39006/33 Series – Military Conventional Wet Tantalum RIPPLE CURRENT MULTIPLIERS vs. Frequency, temperature and applied voltage1/ 2/ 3/ Frequency of Applied Ripple Current Ambient Still Air Temperature (ºC) 100% % of 85ºC 90% Rated 80% Peak 70% Voltage 66-2/3% Frequency of Applied Ripple Current Ambient Still Air Temperature (ºC) 100% % of 90% 85ºC 80% Rated 70% Peak Voltage 66-2/3% 120Hz 800Hz 1kHz ≤55 85 105 125 ≤55 85 105 125 ≤55 85 105 125 0.60 0.60 0.60 0.60 0.60 0.39 0.46 0.52 0.58 0.60 – – 0.35 0.44 0.46 – – – – 0.27 0.71 0.71 0.71 0.71 0.71 0.43 0.55 0.62 0.69 0.71 – – 0.42 0.52 0.55 – _ – – 0.32 0.72 0.72 0.72 0.72 0.72 0.45 0.55 0.62 0.70 0.72 – – 0.42 0.52 0.55 – – – – 0.32 10kHz 40kHz 100kHz ≤55 85 105 125 ≤55 85 105 125 ≤55 85 105 125 0.88 0.88 0.88 0.88 0.88 0.55 0.67 0.76 0.85 0.88 – – 0.52 0.64 0.68 – – – – 0.40 1.00 1.00 1.00 1.00 1.00 0.63 0.77 0.87 0.97 1.00 – – 0.59 0.73 0.77 – _ – – 0.45 1.10 1.10 1.10 1.10 1.10 0.69 0.85 0.96 1.07 1.10 – – 0.65 0.80 0.85 – – – – 0.50 1/ At 125ºC the rated voltage of the capacitors decreases to 66 2/3 of the 85ºC rated voltage. 2/ The peak of the applied ac ripple voltage plus the applied dc voltage must not exceed the dc voltage rating of the capacitors. 3/ The ripple current listed in the parametric tables represents a rating calculated by using a maximum internal temperature rise (ΔT) at 50°C at 40 kHz at 85°C ambient temperature, with a maximum peak rated voltage of 66.67 percent of the 85°C peak voltage rating. CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE (LETTER DENOTES CASE SIZE) Capacitance µF Code 470 560 680 750 1000 1200 1500 1800 477 567 687 757 108 128 158 188 Rated Voltage DC (VR) to 85°C 25V 30V 50V 60V 75V E E E D D E E M39006 /33 RATINGS AND DASH NUMBER REFERENCE M39006/33 Dashes M Level P Level -0007 -0008 -0009 -0010 -0017 -0018 -0019 -0020 -0029 -0030 -0039 -0040 -0049 -0050 -1007 -1008 -1009 -1010 -1017 -1018 -1019 -1020 -1029 -1030 -1039 -1040 -1049 -1050 Tolerance (%) 20 10 20 10 20 10 20 10 20 10 20 10 20 10 Cap (μF) 25°C ESR max (Ohms) at 120Hz Impedance max (Ohms) -55ºC at 120Hz -55ºC +85ºC at 120Hz DC Rated Voltage (V) at 85ºC 1200 25 5 20 70.6 0.65 7 -70 12 18 2600 T3 1800 25 6 25 81.4 0.5 7 -75 12 20 3100 T4 1000 30 7 25 63.3 0.7 7 -70 10 18 2500 T3 1500 30 12 35 81.4 0.6 6 -72 10 20 3000 T4 680 50 5 40 43.1 0.7 10 -58 10 20 2750 T4 560 60 5 40 40.5 0.8 10 -58 8 15 2750 T4 470 75 5 50 38.3 0.9 12 -55 8 12 2750 T4 DC Leakage max (μA) DF +25ºC +85ºC & +125ºC max (%) Case Size +125ºC AC Ripple (mA rms) 85ºC at 40kHz Maximum Capacitance Change (%) All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2V. DCL is measured at rated voltage after 5 minutes. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 061120 – high reliability tantalum capacitors – 107