NLJA476M006R1600

NLJ Series – High CV OxiCap® OxiCap® NLJ Series Niobium Oxide Capacitors High CV Consumer Series FEATURES • • • • • • • • • • High Volumetric Efficiency Environmentally Friendly 3x Reflow 260°C Compatible 100% Surge Current Tested Consumer Applications OxiCap® Non-Burn Technology RoHS Compliance Lead-Free Solution 6 Case Sizes Available CV Range: 22-150μF / 4-10V LEAD-FREE COMPATIBLE COMPONENT Elektra Award 2005 APPLICATIONS • Consumer Handhelds and Entertainment L W NON-BURN NON-SMOKE H A S CASE DIMENSIONS: A W1 MARKING A, B, G, S, T CASE Rated Voltage A = 10V Capacitance Value in pF 226 = 22µF Polarity Band (Anode+) 226 A XXXXX millimeters (inches) Code EIA Code EIA Metric L±0.20 (0.008) W+0.20 (0.008) –0.10 (0.004) H+0.20 (0.008) –0.10 (0.004) W1 ±0.20 (0.008) A+0.30 (0.012) –0.20 (0.008) S Min. A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043) B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) G 1206 3216-15 3.20 (0.126) 1.60 (0.063) 1.50 (0.059) max 1.20 (0.047) 0.80 (0.031) 1.10 (0.043) P 0805 2012-15 2.05 (0.081) 1.35 (0.053) 1.50 (0.059) max 1.00±0.10 (0.039±0.004) 0.50 (0.020) 0.85 (0.033) S 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) max 1.20 (0.047) 0.80 (0.031) 1.10 (0.043) T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) max 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) OxiCap® LOGO ID Code P CASE W1 dimension applies to the termination width for A dimensional area only. Capacitance Value in pF 156 = 15µF 156 OxiCap® LOGO G Polarity Band (Anode+) Rated Voltage Code G = 4V HOW TO ORDER NLJ A 476 M 006 R 1600 Type Case Size See table above Capacitance Code 1st two digits represent significant figures, 3rd digit represents multiplier in pF Tolerance M = ±20% Rated DC Voltage 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel ESR in mΩ TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Category Voltage (VC) Temperature Range: Reliability: -55°C ≤ +40°C: at 85°C: at 105°C: All technical data relate to an ambient temperature of +25°C 22 μF to 150 μF ±20% 0.1CV 4 6.3 10 2 3.2 5 1.3 2 3.3 -55°C to +105°C with category voltage 0.2% per 1000 hours at 85°C, 0.5xVR, 0.1Ω/V series impedance with 60% confidence level The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 102220 – polymer, tantalum and niobium oxide capacitors – 171 OxiCap® NLJ Series Niobium Oxide Capacitors High CV Consumer Series CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 22 226 33 336 47 476 68 686 100 107 150 157 Rated Voltage DC to 40°C 6.3V (J) 10V (A) S(1800) A(4000)/G(3000) G(2200) A(1700) A(1600)/T(1600) B(1000) 4V (G) P(4000) B(1700) B(1500) Released ratings, (ESR ratings in mOhms in parentheses) Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE DCL Max. (μA) ESR Max. @ 100kHz (mΩ) 0.4 1.0 8.8 60.0 1.4 1.2 1.5 1.5 1.5 1.1 1.4 2.3 3.4 Rated Rated Category Category Maximum Voltage Temperature Voltage Temperature Surge Current (V) (ºC) (V) (ºC) (A) Part Number Case Size Capacitance (μF) NLJP226M004#4000 NLJB157M004#1500 P B 22 150 4 4 85 85 NLJS226M006#1800 NLJG336M006#2200 NLJA476M006#1600 NLJT476M006#1600 NLJB107M006#1700 S G A T B 22 33 47 47 100 6.3 6.3 6.3 6.3 6.3 85 85 85 85 85 NLJA226M010#4000 NLJG226M010#3000 NLJA336M010#1700 NLJB476M010#1000 A G A B 22 22 33 47 10 10 10 10 85 85 85 85 4 Volt @ 85°C 1.3 105 1.3 105 6.3 Volt @ 85°C 2 105 2 105 2 105 2 105 2 105 10 Volt @ 85°C 3.3 105 3.3 105 3.3 105 3.3 105 100kHz RMS Current (mA) 85ºC 105ºC 4000 1500 134 261 121 235 54 104 3 3 13.2 19.8 28.2 28.2 60.0 1800 2200 1600 1600 1700 208 195 237 245 245 187 176 213 220 220 83 78 98 98 98 3 3 3 3 3 22.0 22.0 33.0 47.0 4000 3000 1700 1000 150 167 230 319 135 151 207 287 60 67 92 128 3 3 3 3 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalogue limit post mounting DCL allowed to move up to 2.00 times catalogue limit post mounting For typical weight and composition see page 259. NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards. Voltage vs Temperature Rating 100% 90% 80% 70% Rated range 100% 100% 80% 80% 60% Recommended derating 67% 50% 50% 40% 30% 33% 20% 10% 0% -55°C 172 0°C 40°C 60°C 85°C MSL 25ºC 105°C The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 081821 – polymer, tantalum and niobium oxide capacitors – OxiCap® NLJ Series Niobium Oxide Capacitors High CV Consumer Series QUALIFICATION TABLE TEST Endurance Humidity Temperature Stability Surge Voltage Mechanical Shock Vibration Condition NLJ series (Temperature range -55ºC to +105ºC) Characteristics Apply rated voltage (Ur) at 40ºC and / or category voltage (Uc) at 85ºC for 2000 hours through a circuit impedance of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 65ºC and 90-95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step 1 2 3 4 5 6 Temperature°C +20 -55 +20 +85 +105 +20 Duration(min) 15 15 15 15 15 15 MIL-STD-202, Method 204, Condition D no visible damage DCL 2 x initial limit ΔC/C within ±10% of initial value ESR Visual examination DCL ΔC/C ESR 1.25 x initial limit no visible damage 2 x initial limit within ±10% of initial value 1.25 x initial limit DCL ΔC/C Apply 1.3x rated voltage (Ur) at 40ºC for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω MIL-STD-202, Method 213, Condition C Visual examination +20ºC -55ºC +20ºC +85ºC +105ºC +20ºC 2 x IL* n/a 2 x IL** 10 x IL* 12.5 x IL* 2 x IL* +20/-0% +25/-0% ±5% n/a +0/-20% ESR 1.25 x IL* 2.5 x IL* ±5% Visual examination no visible damage DCL 2 x initial limit ΔC/C within ±5% of initial value ESR Visual examination 1.25 x initial limit no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR initial limit 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* *Initial Limit The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 040320 – polymer, tantalum and niobium oxide capacitors – 173 OxiCap® NLJ Series Niobium Oxide Capacitors High CV Consumer Series SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP : NIOBIUM OXIDE OxiCap® CAPACITORS 174 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 122920 – polymer, tantalum and niobium oxide capacitors –