NOME227M006S0040

NOM Series – Multianode Ultra-Low ESR OxiCap® OxiCap® NOM Low ESR Multianodes Niobium Oxide Capacitor FEATURES • • • • • • • Multi-anode Construction Super Low ESR 100% Surge Current Tested Non-Burn Safe Technology CV Range: 220-680μF / 1.8-6.3V IBM Global Approval Received in 2004 Elektra Award Received in 2005 LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS Elektra Award 2005 • High Power Low Voltage Industrial Power Supplies L W NON-BURN NON-SMOKE H A S A NOM MULTIANODE CONSTRUCTION W1 MARKING E CASE OxiCap® LOGO Polarity Band (Anode+) 227 G XXXXX CASE DIMENSIONS: Capacitance Value in pF 227 = 220µF Rated Voltage G = 4V ID Code Code EIA Code EIA Metric L±0.20 (0.008) E 2917 7343-43 7.30 (0.287) millimeters (inches) W+0.20 (0.008) H+0.20 (0.008) –0.10 (0.004) –0.10 (0.004) 4.30 (0.169) 4.10 (0.162) W1 ±0.20 (0.008) A+0.30 (0.012) –0.20 (0.008) S Min. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. HOW TO ORDER NOM E 227 M 006 R 0040 Type Case Size See table above Capacitance Code 1st two digits represent significant figures, 3rd digit represents multiplier in pF Tolerance M = ±20% Rated DC Voltage 001 = 1.8Vdc 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel ESR in mΩ TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage DC (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: 182 ≤ +85°C: ≤ +125ºC: ≤ +85ºC: ≤ +125ºC: All technical data relate to an ambient temperature of +25°C is not stated 220 μF to 680 μF ±20% 0.02CV 1.8 2.5 4 6.3 0.9 1.3 2 3 2.3 3.3 5.2 8 1.2 1.7 2.6 4 -55°C to +125°C 0.2% per 1000 hours at 85°C, VR, 0.1Ω/V series impedance, 60% confidence level Meets requirements of AEC-Q200 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 102220 – polymer, tantalum and niobium oxide capacitors – OxiCap® NOM Low ESR Multianodes Niobium Oxide Capacitor CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 220 227 330 337 470 477 680 687 1.8V (x) Rated Voltage DC (VR) to 85°C 2.5V (e) 4.0V (G) E(35) E(23,30) E(30) E(23) E(23) 6.3V (J) E(40) E(23,35) Released ratings, (ESR ratings in mOhms in parentheses) Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE Part Number Rated Rated Category Category Case Capacitance Voltage Temperature Voltage Temperature Size (μF) (V) (ºC) (V) (ºC) NOME687M001#0023 E 680 1.8 85 NOME477M002#0030 NOME687M002#0023 E E 470 680 2.5 2.5 85 85 NOME337M004#0035 NOME477M004#0023 NOME477M004#0030 E E E 330 470 470 4 4 4 85 85 85 NOME227M006#0040 NOME337M006#0023 NOME337M006#0035 E E E 220 330 330 6.3 6.3 6.3 85 85 85 1.8 Volt @ 85°C 0.9 125 2.5 Volt @ 85°C 1.3 125 1.3 125 4 Volt @ 85°C 2 125 2 125 2 125 6.3 Volt @ 85°C 3 125 3 125 3 125 DCL Max. (μA) DF Max. (%) ESR Max. @ 100kHz (mΩ) 24.5 6 23.5 34 100kHz RMS Current (A) MSL 25ºC 85ºC 125ºC 23 3.753 3.378 1.501 3 10 6 30 23 3.286 3.753 2.958 3.378 1.315 1.501 3 3 26.4 37.6 37.6 8 6 6 35 23 30 3.043 3.753 3.286 2.738 3.378 2.958 1.217 1.501 1.315 3 3 3 26.4 39.6 39.6 12 6 6 40 23 35 2.846 3.753 3.043 2.561 3.378 2.738 1.138 1.501 1.217 3 3 3 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 125 times catalog limit post mounting. For typical weight and composition see page 259. NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 081821 – polymer, tantalum and niobium oxide capacitors – 183 OxiCap® NOM Low ESR Multianodes Niobium Oxide Capacitor QUALIFICATION TABLE TEST Endurance Storage Life Humidity Biased Humidity Temperature Stability Surge Voltage Mechanical Shock Vibration NOM series (Temperature range -55ºC to +125ºC) Characteristics Condition Apply rated voltage (Ur) at 85ºC and / or category voltage (Uc) at 125ºC for 2000 hours through a circuit impedance of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 125ºC, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 65ºC and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Apply rated voltage (Ur) at 85ºC, 85% relative humidity for 1000 hours. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step 1 2 3 4 5 Temperature°C +20 -55 +20 +85 +125 Duration(min) 15 15 15 15 15 6 +20 15 Apply 1.3x category voltage (Uc) at 125ºC for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω MIL-STD-202, Method 213, Condition F MIL-STD-202, Method 204, Condition D Visual examination no visible damage DCL initial limit ΔC/C within ±10% of initial value DF initial limit ESR 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±10% of initial value DF initial limit ESR 1.25 x initial limit Visual examination no visible damage DCL 1.5 x initial limit ΔC/C within ±10% of initial value DF 1.2 x initial limit ESR 1.25 x initial limit Visual examination no visible damage DCL 2 x initial limit ΔC/C within ±10% of initial value DF 1.2 x initial limit ESR 1.25 x initial limit +20ºC -55ºC +20ºC +85ºC +125ºC DCL IL* n/a IL* 12 x IL* 15 x IL* ΔC/C n/a +0/-10% ±5% DF IL* 1.5 x IL* IL* ESR 1.25 x IL* 2.5 x IL* 1.25 x IL* Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR 1.25 x initial limit +10/-0% +12/-0% 1.5 x IL* The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 072121 – polymer, tantalum and niobium oxide capacitors – IL* ±5% IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* *Initial Limit 184 2 x IL* +20ºC OxiCap® NOM Low ESR Multianodes Niobium Oxide Capacitor SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP : NIOBIUM OXIDE OxiCap® CAPACITORS The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 122920 – polymer, tantalum and niobium oxide capacitors – 185