SCCW45B107SSB

SCC Series High Capacitance Cylindrical SuperCapacitors The new series of cylindrical electrochemical double-layer capacitors offers excellent pulse power handling characteristics based on the combination of very high capacitance and very low ESR. Used by themselves or in conjunction with primary or secondary batteries, they provide extended back up time, longer battery life, and provide instantaneous power pulses as needed. Offers great solutions to Hold Up, Energy Harvesting, and Pulse Power Applications. FEATURES APPLICATIONS • • • • • • • • • • • • Cap Values from 1F – 3000F High pulse power capability Low ESR Low Leakage Current Camera Flash Systems Energy Harvesting GSM/GPRS Pulse Applications UPS/Industrial Wireless Alarms Remote Metering Scanners Toys and Games HOW TO ORDER SCC R 12 B 105 P R B _ Series SuperCap Cylindrical Diameter Q = 6.3mm R = 8mm S = 10mm T = 12.5mm U = 16mm V = 18mm W = 22mm X = 30mm Y = 35mm Z = 60mm Case Length Two digits represent case length in mm, with the exception of the following: 1E = 138mm Voltage Code B = 2.7V Capacitance Code 1st two digits represent significant figures 3rd digit represents multiplier (number of zeros to follow) in µF Tolerance P = +100%/-0% S = +30%/-10% Lead Format R = Radial S = Solder Pin N = Snap-in C = Weldable Lug W = Screw Package B = Bulk A = Ammo* T = Tray** Custom Code A1= 4mm Bent Leads* C1 = 2mm Bent Leads* * Inquire about availability for Radial Leads only **Inquire about availability QUALITY INSPECTIONS TERMINATION Parts are tested for Life Cycle, high temperature load life, temperature characteristics, vibration resistance, and humidity characteristics. See page 2 for more information. These SuperCapacitors are compatible with hand soldering and wave soldering processes, so long as appropriate precautions are followed. See "Soldering Recommendations" on page 5 for more information. OPERATING TEMPERATURE -40°C to +65°C @ 2.7V -40°C to +85°C @ 2.3V LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 102120 – supercapacitors – 1 SCC Series High Capacitance Cylindrical SuperCapacitors RATING & PART NUMBER REFERENCE Part Number Diameter (mm) Length (mm) Rated Capacitance (F) Capacitance Tolerance Rated Voltage (V) SCCQ12B105PRB 6.3 12 1 +100%/-0% 2.7/2.3* SCCR12B105PRB 8 12 1 +100%/-0% 2.7/2.3* SCCQ15B125SRB 6.3 15 1.2 +30%/-10% SCCR16B205PRB 8 16 2 SCCR20B335PRB 8 20 Rated Temperature (°C) DCL Max @ 72 Hrs (µA) ESR Max @ 1000 Hz (mΩ) ESR Max @ DC (mΩ) Peak Current (A) Power Density (W/kg) Max Energy (Wh) Energy Density (Wh/kg) 65/85* 6 200 1500 0.90 2692 0.0010 1.56 65/85* 6 150 500 0.90 1842 0.0010 1.07 2.7/2.3* 65/85* 6 240 620 0.93 1933 0.0012 1.66 +100%/-0% 2.7/2.3* 65/85* 10 100 360 1.57 2113 0.0020 1.76 3.3 +100%/-0% 2.7/2.3* 65/85* 12 95 290 2.28 2080 0.0033 2.30 Radial Lead SCCR25B505PRB 8 25 5 +100%/-0% 2.7/2.3* 65/85* 15 85 220 3.21 2339 0.0051 2.98 SCCS20B505PRB 10 20 5 +100%/-0% 2.7/2.3* 65/85* 15 70 180 3.55 2314 0.0051 2.41 SCCS25B705PRB 10 25 7 +100%/-0% 2.7/2.3* 65/85* 20 60 150 4.61 2243 0.0071 2.73 SCCS30B106PRB 10 30 10 +100%/-0% 2.7/2.3* 65/85* 30 40 75 7.71 3763 0.0101 3.27 SCCT20B106PRB 12.5 20 10 +100%/-0% 2.7/2.3* 65/85* 30 50 75 7.71 3431 0.0101 2.98 SCCS30B126SRB 10 30 12 +30%/-10% 2.7/2.3* 65/85* 30 50 75 8.53 3812 0.0122 3.97 SCCT30B156SRB 12.5 30 15 +30%/-10% 2.7/2.3* 65/85* 50 35 80 9.20 2430 0.0152 3.38 SCCT30B186SRB 12.5 30 18 +30%/-10% 2.7/2.3* 65/85* 55 40 60 11.68 3378 0.0182 4.93 SCCT35B226SRB 12.5 35 22 +30%/-10% 2.7/2.3* 65/85* 58 34 58 13.05 2631 0.0223 3.89 SCCU25B256SRB 16 25 25 +30%/-10% 2.7/2.3* 65/85* 60 27 50 15.00 2397 0.0253 3.47 SCCU30B356SRB 16 30 35 +30%/-10% 2.7/2.3* 65/85* 70 20 40 19.69 2514 0.0354 4.07 5.40 SCCT47B406SRB 12.5 47 40 +30%/-10% 2.7/2.3* 65/85* 75 19 29 25.00 4022 0.0405 SCCV40B506SRB 18 40 50 +30%/-10% 2.7/2.3* 65/85* 75 18 20 33.75 3365 0.0506 3.89 SCCV60B107SRB 18 60 100 +30%/-10% 2.7/2.3* 65/85* 260 15 18 48.21 2430 0.1013 5.06 SCCW45B107SSB 22 45 100 +30%/-10% 2.7/2.3* 65/85* 260 8 12 61.36 3391 0.1013 4.71 SCCX50B207SSB 30 50 200 +30%/-10% 2.7/2.3* 65/85* 600 6 9 96.43 2461 0.2025 5.13 SCCY62B307SSB 35 62 300 +30%/-10% 2.7/2.3* 65/85* 650 6 9 109.46 1262 0.3038 3.94 SCCY68B407SSB 35 68 400 +30%/-10% 2.7/2.3* 65/85* 1000 4 5 180.00 2046 0.4050 4.74 1000 4 5 180.00 2430 0.4050 5.63 5200 0.2 0.29 2165.78 6033 3.0375 6.08 5200 0.2 0.29 2165.78 6033 3.0375 6.08 Solder Pin Lead Snap-In SCCY60B407SNB 35 60 400 +30%/-10% 2.7/2.3* 65/85* Cylindrical Lug Lead SCCZ1EB308SCB 60 138 3000 +30%/-10% 2.7/2.3* 65/85* Cylindrical Screw Lead SCCZ1EB308SWB 60 138 3000 +30%/-10% 2.7/2.3* 65/85* *with appropriate voltage derating operating temperature can be extended to 85°C QUALIFICATION TEST SUMMARY Test Test Method Parameter Limits Life Cycle Capacitors are cycled between rated voltage and half-rated voltage under constant current at +25°C for 500,000 cycles Capacitance ESR Appearance ≤30% of spec value ≤200% of spec value No remarkable defects High Temperature Load Life Voltage: Rated Voltage Capacitance ESR Appearance ≤30% of spec value ≤200% of spec value No remarkable defects Capacitance ESR Appearance ≤30% of spec value ≤200% of spec value No remarkable defects Capacitance ESR Appearance ≤30% of spec value ≤200% of spec value No remarkable defects Capacitance ESR Appearance ≤30% of spec value ≤200% of spec value No remarkable defects Storage Temperature Characteristics Vibration Resistance Temperature: +65°C Test Duration: 1,000 hours Storage Duration: 2 years No Load Temperature: +35°C Amplitude: 1.5mm Frequency: 10 ~ 55Hz Direction: X, Y, Z for 2 hours each Voltage: Rated Voltage Humidity RH: 90% Temperature: +60°C Test Duration: 1,000 hours 2 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 040422 – supercapacitors – SCC Series High Capacitance Cylindrical SuperCapacitors QUALITY AND RELIABILITY CAPACITANCE VS. TEMPERATURE Percent of 25°C Reading 200% 150% 100% 50% 0% -40°C -20°C 0°C 20°C 40°C 60°C 80°C Percent of 25°C Reading Temperature (ºC) 700% 600% 500% 400% 300% 200% 100% 0% -40°C LEAKAGE CURRENT VS. TEMPERATURE -20°C 0°C 20°C 40°C 60°C 80°C 60°C 80°C Temperatue (ºC) EQUIVALENT SERIES RESISTANCE VS. TEMPERATURE Percent of 25°C Reading 300% 250% 200% 150% 100% 50% 0% -40°C -20°C 0°C 20°C 40°C Temperature (°C) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 011519 – supercapacitors – 3 SCC Series High Capacitance Cylindrical SuperCapacitors MECHANICAL SPECIFICATIONS RADIAL LEAD TYPE 1F – 100F L ± 2.0 mm øD+1.0/-0mm D (mm) P (mm) d (mm) 6.3 2.3 0.6 8 3.2 0.6 10 5.0 0.6 12.5 5.5 0.6* 16 7.3 0.8 18 8.0 0.8 *For parts with Diameter (D)=12.5mm: If Length ≤ 30mm, Lead Diameter (d)=0.6mm If Length ≥ 35mm, Lead Diameter (d)=0.8mm RADIAL BENT LEAD TYPE SOLDER PIN TYPE 4-PIN 300F, 400F PARTS øD+1.0/-0mm P ± 0.5 mm L ± 2.0 mm Style B (mm) A1 4 C1 2 Cap (F) D (mm) 300 35 L (mm) 62 400 35 68 SNAP-IN 400F PART SOLDER PIN TYPE 2 PIN 100F, 200F PART L ±2mm 1.6±0.05mm D±1.0mm 10±0.5mm 7±1.0mm Vent (-) Negative Polarity WELDABLE LUG TYPE 3000F PART 3±0.5mm 138±2mm - 3±0.5mm + Ø60+1.5/-0mm Vent Ø60+1.5/-0mm Φ34 CYLINDRICAL SCREW TYPE 3000F PART ø18±0.1mm ø16±0.1mm 12 138±2mm 4 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 110821 – supercapacitors – SCC Series High Capacitance Cylindrical SuperCapacitors SOLDERING RECOMMENDATIONS When soldering SuperCapacitors to a PCB, the temperature & time that the body of the SuperCapacitor sees during soldering can have a negative effect on performance. We advise following these guidelines: • Do not immerse the SuperCapacitors in solder. Only the leads should come in contact with the solder. • Ensure that the body of the SuperCapacitor is never in contact with the molten solder, the PCB or other components during soldering. • Excessive temperatures or excessive temperature cycling during soldering may cause the safety vent to burst or the case to shrink or crack, potentially damaging the PCB or other components, and significantly reduce the life of the capacitor. WAVE SOLDERING Only use wave soldering on Radial type SuperCapacitors. The PCB should be preheated only from the bottom and for less than 60 seconds, with temperature at, or below, 100°C on the top side of the board for PCBs equal to or greater than 0.8 mm thick. Solder Temperature (ºC) PRECAUTION: For all products with shrink wrap sleeves, washing in any type of cleaning agent is prohibited. During all soldering processes, it’s recommended to protect the shrink wrap from any kind of liquid (including but not limited to: water, strong acid, strong alkali, strong oxidizing solutions, and strong solvents) to avoid the risk of damage, cracking, and fading of the outer shrink wrap. Suggested Solder Time (s) Maximum Solder Time (s) 220 7 9 240 7 9 250 5 7 260 3 5 HAND SOLDERING Keep distance between the SuperCapacitor body and the tip of the soldering iron and the tip should never touch the body of the capacitor. Contact between SuperCapacitor body and soldering iron will cause extensive damage to the SuperCapacitor, and change its electrical properties. It is recommended that the soldering iron temperature should be less than 350°C, and contact time should be limited to less than 4 seconds. Too much exposure to terminal heat during soldering can cause heat to can cause heat to transfer to the body of the SuperCapacitor, potentially damaging the electrical properties of the SuperCapacitor. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 081220 – supercapacitors – 5 SCC Series High Capacitance Cylindrical SuperCapacitors TEST METHODS IEC CAPACITANCE TEST METHOD Procedure: Charge module under constant current to rated voltage at room temperature, then hold 10 minutes on charge under constant voltage. After 10 minutes, discharge under constant current (as shown in chart below), recording voltage at V1, V2, and time intervals at t1 and t2. Use the capacitance formula to determine cap value. Voltage (V) 10 30min min VR I – Discharge Current, 4 × C × VR (mA) V3 ESR Drop V1 VR – Rated Voltage (V) V1 – Initial Test Voltage, 80% Of VR (V) V2 – Final Test Voltage, 40% Of VR (V) t1 – Initial Test Time (s) T2 – Final Test Time (s) V2 C= t2 t1 DC ESR MEASUREMENT VR • • • • • Rest 10 Seconds Charge under constant current (I1) to rated voltage (VR) Rest 5 seconds Rest 10 seconds, record V3 and t4 Discharge under constant current (I2) to half rated voltage, Record I2, V4, And t5 • Rest 2 seconds, record V5 And t6 Repeat steps 1-6 recording I, V, And t accordingly, finally discharging to below 0.1V under constant current (I2). • Two cycle discharge capacitances: Cdch1 = I2 × • Discharge capacitance: Cdch = (Cdch1 + Cdch2) (t5 − t4) V3 - V4 ; Cdch2 = I2 × 50% VR (t11−t10 ) (V9−V10 ) 2 • Two cycle discharge DC ESR: ESRdch1 = • Discharge DC ESR: ESRdch = V1 - V2 Time (s) A six-step ESRDC test method is illustrated to the right and carried out as follows: Formulas to calculate: I × (t2 − t1) (V5 −V4) I2 (ESRdch1+ ESRdch2) ;ESRdch2= (V11 −V10) I2 2 Note: I1 = I2 = 75mA/F, the rated capacitance in the chart means discharge capacitance, and DC ESR (ESRDC) means discharge DC resistance. 6 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 011922 – supercapacitors – SCC Series High Capacitance Cylindrical SuperCapacitors TEST METHODS (continued) MAXIMUM CONTINUOUS CURRENT • This is the maximum current when temperature rise of the supercapacitor during its operation is less than 15°C MAXIMUM PEAK CURRENT • This is the maximum current during 1 second time interval (dt) WATT DENSITY • Watt Density = (0.12*V2 / RDC ) / mass ENERGY DENSITY • Energy Density = (½ CV2) / (3600*mass) POLARITY AND REVERSE VOLTAGE For product consistency and optimum performance, it is recommended that the capacitor be connected with polarity indicated. Reversing polarity could result in permanent damage to the circuit including much higher leakage current for a short duration of time and the life time of the supercapacitors will be reduced. LIFE TIME AND TEMPERATURE PERFORMANCE The life of a supercapacitor is impacted by a combination of operating voltage and the operating temperature according to the following Time to Failure equation: ( −Q ) t ∝ Vn × e kT where V is the operating voltage, Q is the activation energy in electron volts (eV), k is the Boltzmann constant in eV, and T is the operating temperature in Kelvin (K). Typical values for the voltage exponent, n, is between 2.5-3.5, and Q is between 1.0-1.2 eV in the normal operating temperature range of -40° to 65°C. The industry standard for supercapacitor end of life is when the equivalent series resistance, ESR, increases to 200% of the specified value and the capacitance drops by 30% from specified value. Typically a supercapacitor shows an initial “jump” in the ESR value and then levels off. If the supercapacitors are exposed to excessive temperatures the ESR will show a continuous degradation (increase). In the extreme case, if the temperature or voltage are substantially higher than the rated specifications, this could result in the part venting and the product showing a faster degradation of capacitance and ESR, which may be many times the specified value. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 062121 – supercapacitors – 7 SCC Series High Capacitance Cylindrical SuperCapacitors 8 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 062121 – supercapacitors – SCC Series High Capacitance Cylindrical SuperCapacitors SAFETY RECOMMENDATIONS REGULATORY WARNINGS • • • • • To Avoid Short Circuit, after usage or test, SuperCapacitor voltage needs to discharge to ≤ 0.1V • Do not Apply Overvoltage, Reverse Charge, Burn or Heat Higher than 150°C, explosion-proof valve may break open • Do not Press, Damage or disassemble the SuperCapacitor, housing could heat to high temperature causing Burns • If you observe Overheating or Burning Smell from the capacitor disconnect Power immediately, and do not touch UL 810A RoHS Compliant REACH Compliant Halogen free according to IEC 61249-2-21: 2003 and IPC/JEDEC-JSTD-709 STORAGE Capacitors may be stored within the temperature range of -40°C to +70°C with humidity < 60%. Lower storage temperature is preferred as it extends the shelf life of the capacitor. Product over one year and within two years of the date code, we recommend recharging the product at the beginning of use for at least 24 hours. EMERGENCY APPLICATIONS If Housing is Leaking: • Skin Contact: Use soap and water thoroughly to wash the area of the skin • Eye Contact: Flush with flowing water or saline, and immediately seek medical treatment • Ingestion: Immediately wash with water and seek medical treatment TRANSPORTATION Optimum storage conditions are as follows: • • • • 25°C and RH ≤ 60% without voltage applied Not in direct sunlight Not in direct contact with water, salt oil or other chemicals Not in direct contact with corrosive materials, acids, alkalis, or toxic gases • Not in dusty environments • Not in environments with shock and vibration conditions Not subjected to US DOT or IATA regulations UN3499,