SK052C105KAR

SMPS Capacitors SK Style – Commercial Radial Range PRODUCT OFFERING – C0G, N1500 AND X7R AVX SK styles are conformally coated MLC capacitors for input or output filtering in switch mode power supplies. They are specially processed to handle high currents and are low enough in cost for commercial SMPS application. ELECTRICAL SPECIFICATIONS Temperature Coefficient C0G: A Temperature Coefficient – 0 ±30 ppm/°C, -55° to +125°C N1500: 4 Temperature Coefficient – -1500 ±250 ppm/°C X7R: C Temperature Coefficient – ±15%, -55° to +125°C Capacitance Test (MIL-STD-202 Method 305) C0G, N1500: 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz X7R: 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz Dissipation Factor 25°C C0G, N1500: 0.15% Max @ 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz X7R: 2.5% Max @ 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz Insulation Resistance 25°C (MIL-STD-202 Method 302) C0G, N1500, X7R: 100K MΩ or 1000 MΩ-μF, whichever is less. Insulation Resistance 125°C (MIL-STD-202 Method 302) C0G, N1500, X7R: 10K MΩ or 100 MΩ-μF, whichever is less. Dielectric Withstanding Voltage 25°C (Flash Test) C0G, N1500, X7R: 250% rated voltage for 5 seconds with 50 mA max charging current. (500 Volt units @ 750 VDC) Life Test (1000 hrs) C0G, N1500, X7R: 200% rated voltage at +125°C. (500 Volt units @ 600 VDC) Moisture Resistance (MIL-STD-202 Method 106) C0G, N1500, X7R, Z5U: Ten cycles with no voltage applied. Thermal Shock (MIL-STD-202 Method 107, Condition A) Immersion Cycling (MIL-STD-202 Method 104, Condition B) Resistance To Solder Heat (MIL-STD-202, Method 210, Condition B, for 20 seconds) HOW TO ORDER SK Style 01 3 C 394 Z Size Voltage Temperature Coefficient Capacitance Code Capacitance Tolerance See chart below 25V = 3 50V = 5 100V = 1 200V = 2 500V = 7 C0G = A N1500 = 4 X7R = C C0G, N1500: J = ±5% K = ±10% M = ±20% X7R: K = ±10% M = ±20% Z = +80, -20% (2 significant digits + no. of zeros) 22 nF = 223 220 nF = 224 1 μF = 105 100 μF = 107 A Test Level A = Standard B = Hi-Rel* A Leads A = Tin/Lead R = RoHS Compliant* * Packaging (See Note 1) Note 1: No suffix signifies bulk packaging, which is AVX standard packaging. SK01, SK*3, SK*4, SK*5, SK*6, SK*9 & SK*0 are available taped and reel per EIA-468. Use suffix “TR1” if tape & reel is required. Note 2: Capacitors with X7R dielectric are not intended for applications across AC supply mains or AC line filtering with polarity reversal. Contact plant for recommendations. *Hi-Rel screening consists of 100% Group A (B Level), Subgroup 1 per MIL-PRF-49470. TAPE & REEL QUANTITY Part Pieces SK01 SK03/SK53 SK04/SK54 SK05/SK55 SK06/SK56 SK07 SK08 SK09/SK59 SK10/SK60 2000 1000 1000 500 500 N/A N/A 500 400 Part RoHS SK01 SK03/SK53 SK04/SK54 SK05/SK55 SK06/SK56 SK07 SK08 SK09/SK59 SK10/SK60 Available Yes Yes Yes Yes Yes Yes Yes Yes Yes Not RoHS Compliant For RoHS compliant products, please select correct termination style. Performance of SMPS capacitors can be simulated by downloading SpiCalci software program http://www.avx.com/download/software/SpiCalci-AVX.zip Custom values, ratings and configurations are also available. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 011419 – advanced ceramic capacitors – 69 SMPS Capacitors SK Style – Product Offering – COG, N1500, X7R SK01 SK03 – SK10 SK53 - SK56 and SK59 – SK60 C0G Capacitance Range (μF) Style 25 WVDC min./max. 50 WVDC min./max. 100 WVDC min./max. SK01 SK03/SK53 SK04/SK54 SK05/SK55 SK06/SK56 SK07 SK08 SK09/SK59 .001/0.015 .01/0.056 .01/0.12 .01/0.18 .10/0.56 .10/0.68 .82/1.20 .10/0.27 .001/0.012 .01/0.047 .01/0.10 .01/0.15 .01/0.47 .01/0.56 .68/1.10 .01/0.22 .001/0.010 .01/0.039 .01/0.082 .01/0.12 .01/0.39 .01/0.47 .56/0.82 .01/0.18 SK10/SK60 .10/0.68 .01/0.56 .01/0.47 200 WVDC min./max. X7R Capacitance Range (μF) 500 WVDC min./max. .0010/0.0056 .0010/0.0018 .001/0.022 .001/0.0068 .01/0.047 .001/0.015 .01/0.068 .001/0.022 .01/0.22 .01/0.068 .01/0.27 .01/0.082 .33/0.47 .10/0.15 .01/0.10 .001/0.039 .01/0.27 .01/0.082 Style 25 WVDC min./max. 50 WVDC min./max. 100 WVDC min./max. 200 WVDC min./max. 500 WVDC min./max. SK01 SK03/SK53 SK04/SK54 SK05/SK55 SK06/SK56 SK07 SK08 SK09/SK59 SK10/SK60 .01/0.39 .10/2.2 .10/4.7 .10/6.8 1.0/15 1.0/18 22/33 .10/8.2 1.0/18 .01/0.33 .10/1.8 .10/3.3 .10/6.8 1.0/10 1.0/14 15/22 .10/5.6 1.0/12 .01/0.27 .01/1.5 .10/2.7 .10/3.9 .10/5.6 1.0/8.2 10/15 .10/3.3 .10/6.8 .01/0.12 .01/0.68 .01/1.0 .10/1.8 .10/3.9 .10/4.7 5.6/8.2 .10/2.2 .10/4.7 .001/0.047 .01/0.27 .01/0.47 .01/0.68 .10/1.5 .10/2.2 2.2/3.9 .10/1.2 .10/2.2 N1500 Capacitance Range (μF) Style SK01 SK03/SK53 SK04/SK54 SK05/SK55 SK06/SK56 SK07 SK08 SK09/SK59 SK10/SK60 50 WVDC min./max. .001/0.022 .01/0.10 .01/0.22 .01/0.27 .01/0.82 .01/1.00 .68/2.00 .01/0.56 .01/1.00 100 WVDC min./max. .001/0.018 .01/0.082 .01/0.15 .01/0.22 .01/0.68 .01/0.82 .88/1.60 .01/0.39 .01/0.82 200 WVDC min./max. .001/0.012 .01/0.056 .01/0.12 .01/0.18 .01/0.47 .01/0.56 .62/1.20 .01/0.27 .01/0.68 500 WVDC min./max. .001/0.0027 .001/0.012 .001/0.027 .001/0.039 .01/0.12 .01/0.15 .21/0.30 .01/0.068 .01/0.15 DIMENSIONS Style SK01 SK03/SK53 SK04/SK54 SK05/SK55 SK06/SK56 SK07 SK08 SK09/SK59 SK10/SK60 L = Length H = Height 70 millimeters (inches) L (max.) 5.08 (0.200) 7.62 (0.300) 10.2 (0.400) 12.7 (0.500) 22.1 (0.870) 27.9 (1.100) 27.9 (1.100) 17.0 (0.670) 23.6 (0.930) H (max.) T (max.) 5.08 (0.200) 7.62 (0.300) 10.2 (0.400) 12.7 (0.500) 15.2 (0.600) 15.2 (0.600) 15.2 (0.600) 13.7 (0.540) 18.3 (0.720) T = Thickness M = Meniscus 1.52 (0.060) max. 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 8.89 (0.350) 5.08 (0.200) 6.35 (0.250) LS (nom.) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 090518 – advanced ceramic capacitors – LD (nom.) 5.08 (0.200) 0.508 (0.020) 5.08 (0.200) 0.508 (0.020) 5.08 (0.200) 0.508 (0.020) 10.2 (0.400) 0.635 (0.025) 20.1 (0.790) 0.813 (0.032) 24.9 (0.980) 0.813 (0.032) 24.9 (0.980) 0.813 (0.032) 14.6 (0.575) 0.635 (0.025) 20.3 (0.800) 0.813 (0.032) LS = Lead Spacing Nominal ±.787 (0.031) LL = Lead Length 50.8 (2.000) max./25.4 (1.000) min. LD = Lead Diameter Nominal ±.050 (0.002)