SQCB7M6R8BAT1A

RF/Microwave MLC’s SQ Series Ultra Low ESR MLC FEATURES: • • • • • Low ESR High Q High Self Resonance Capacitance Range 0.1 pF to 5100 pF 175ºC Capability SQCB (Standard voltages only) APPLICATIONS: • • • • RF Power Amplifiers Low Noise Amplifiers Filter Networks MRI Systems HOW TO ORDER SQ AVX Style CA 7 M 100 Case Size Capacitance CA = 0505 CB = 1111 EIA Capacitance Code in pF. First two digits = significant figures or “R” for decimal place. See mechanical dimensions below Voltage Code 5 = 50V 1 = 100V E = 150V 2 = 200V V = 250V 9 = 300V 7 = 500V C = 600V A = 1000V S = 1500V MECHANICAL DIMENSIONS: T T 1A = 7" Reel Unmarked 6A = Waffle Pack Unmarked ME = 7" Reel Marked WE = Waffle Pack Marked A = Not Applicable B = ±.1 pF C = ±.25 pF D = ±.5 pF F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% N = ±30% 1A Packaging Code Failure Rate Code Capacitance Tolerance Code M = +90±20ppm/°C A = 0±30ppm/°C C = 15% (“J” Termination only) L A Third digit = number of zeros or after “R” significant figures. Temperature Coefficient Code W J * Vertical T&R available Termination Style Code **T = 100% Tin J = Nickel Barrier Sn/Pb (60/40) **7 = Ag/Ni/Au H = Cu/Sn (Non-Magnetic) **RoHS compliant inches (millimeters) Case Length (L) Width (W) Thickness (T) Band Width (bw) SQCA* .055 + .015 - .010 (1.40+ .381 - .254) .110 + .020 - .010 (2.79 +.508 -.254) .055±.015 (1.40±.381) .110±.010 (2.79±.254) .020/.057 (.508/1.45) .030/.102 (.762/2.59) .010 + .010 -.005 (.254 +.254 -.127) .015±.010 (.381±.254) SQCB* bw TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equivalent to IEC 286 part 3). —8mm carrier —7" reel: SQCA/SQCB = 1000 pcs Not RoHS Compliant WAFFLE PACK SQCA 100 pcs SQCB 100 pcs LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. 8 192 12132017 RF/Microwave MLC’s SQ Series Ultra Low ESR MLC ELECTRICAL SPECIFICATIONS Dielectric M&A Temperature Coefficient (TCC) Capacitance Range Operating Temperature (M) +90 ± 20 PPM/ºC ( -55ºC to +125ºC) (M) +90 ± 30 PPM/ºC ( +125ºC to +175ºC)* (A) 0 ± 30 PPM/ºC (M) 0.1 pF to 1000 pF (A) 0.1 pF to 5100 pF A Case: -55ºC to +125ºC* C ±15% (-55ºC to 125ºC) 0.001μF to 0.1μF -55°C to +125°C B Case (M Dielectric): 0.1 pF to 330 pF: from -55ºC to +175ºC 360 pF to 5100 pF: from -55ºC to +125ºC Quality Factor (Q) M Dielectric A & B Case A Dielectric B Case A Dielectric A Case Insulation Resistance (IR) Working Voltage (WVDC) Dielectric Withstanding Voltage (DWV) Aging Effects Piezoelectric Effects Capacitance Drift B Case (A Dielectric): 0.1 pF to 200 pF: from -55ºC to +175ºC 220 pF to 5100 pF: from -55ºC to +125ºC Greater than 10,000 at 1 MHz Greater than 10,000 at 1 MHz Greater than 2,000 at 1 MHz Greater than 2,000 at 1 KHz Greater than 10,000 at 1 MHz Greater than 2,000 at 1 MHz 0.2 pF to 470 pF 106 Megohms min. @ 25ºC at rated WVDC 105 Megohms min. @ 125ºC at rated WVDC 510 pF to 5100 pF 105 Megohms min. @ 25ºC at rated WVDC 104 Megohms min. @ 125ºC at rated WVDC See Capacitance Values table WVDC 500V or less: 250% of rated WVDC for 5 seconds WVDC 1250V or less: 150% of rated WVDC for 5 seconds WVDC > 1250V: 120% of rated WVDC for 5 seconds None None ± (0.02% or 0.02 pF), whichever is greater 2.5% @ 1kHz 0.1 - 200 pF 220 - 1000 pF 1100 - 5100 pF 0.1 - 100 pF 110 - 1000 pF 104 Megohms min. @ 25ºC at rated WVDC 103 Megohms min. @ 125ºC at rated WVDC See Capacitance Values table 250% of rated WVDC for 5 secs