TARW685M035

Molded Axial Capacitors TAR Series SOLID TANTALUM MOLDED AXIAL LEADED CAPACITORS TAR: Designed for use in miniature and subminiature circuit applications. 1. Precision molded and taped and reeled for use in high speed automatic insertion applications. 2. Suitable for decoupling, blocking, by-passing and filtering in computers, data processing, communications and other equipment. 3. Available in four case sizes. 4. Tapered nose identifies positive polarity. 5. Capacitance, tolerance, rated voltage and polarity are marked onto the capacitor body. 6. See page 105 for packaging quantities. CASE DIMENSIONS: 1 (25) min D1 millimeters (inches) L d Polarity mark Case Size L ±0.25 (0.010) D1 ±0.25 (0.010) d ±0.05 (0.002) Typical Weight g Q 6.35 (0.250) 2.16 (0.085) 0.50 (0.020) 0.20 R 7.40 (0.290) 2.50 (0.100) 0.50 (0.020) 0.25 S 8.60 (0.340) 4.30 (0.170) 0.50 (0.020) 0.52 W 10.4 (0.410) 4.30 (0.170) 0.50 (0.020) 0.53 HOW TO ORDER TAR R 335 M 015 Type Case Size Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Capacitance Tolerance K = ±10% M = ±20% Rated DC Voltage *Not recommended for new designs 99 Molded Axial Capacitors TAR Series TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Rated Voltage DC (VR ) Category Voltage (VC ) Surge Voltage (VS ) Surge Voltage (VS ) Temperature Range: Environmental Classification: Dissipation Factor:  +85°C:  +125°C:  +85°C:  +125°C: Capacitance Range (letter denotes case size) Rated voltage DC (VR ) Capacitance μF 4V 6.3V 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 Q 4.7 Q Q 6.8 Q R 10 R R 15 R R 22 R S 33 S S 47 S W 68 W W All technical data relate to an ambient temperature of +25°C 0.10 μF to 68 μF ±20%; ±10% 4 6.3 10 15 20 25 35 50 2.7 4 6.3 10 13 17 23 33 5.2 8 13 20 26 33 46 65 3.5 5 9 12 16 21 28 40 -55°C to +125°C 55/125/56 (IEC 68-2) See part number table 10V Q Q R R R S S W W Values outside this standard range may be available on request without appropriate release or qualification. MARKING • Polarity • Capacitance • Tolerance • Voltage 100 • Date code 15V Q Q R R R S S W W 20V Q Q R R R S S W W 25V Q Q Q R R R S S S W 35V Q Q Q Q Q R R R S S S W W 50V Q Q Q R R R R S S W W AVX reserves the right to supply capacitors to a tighter specification than that ordered. Molded Axial Capacitors TAR Series RATINGS AND PART NUMBER REFERENCE AVX Part No. Case Size Capacitance μF DCL (μA) Max. DF % Max. ESR Max. (Ω) @ 100 kHz AVX Part No. 12 10 10 8.0 6.0 5.0 3.5 2.5 TARQ474(*)025 TARQ684(*)025 TARQ105(*)025 TARR155(*)025 TARR225(*)025 TARR335(*)025 TARS475(*)025 TARS685(*)025 TARS106(*)025 TARW156(*)025 4 volt @ 85°C (2.7 volt @ 125°C) TARQ475(*)004 TARQ685(*)004 TARR106(*)004 TARR156(*)004 TARR226(*)004 TARS336(*)004 TARS476(*)004 TARW686(*)004 Q Q R R R S S W 4.7 6.8 10 15 22 33 47 68 0.5 0.5 0.5 0.5 0.7 1.1 1.5 2.2 8 8 8 8 8 8 8 8 Q Q R R R S S W W 3.3 4.7 6.8 10 15 22 33 47 68 0.5 0.5 0.5 0.5 0.7 1.1 1.5 2.3 3.3 4 4 6 6 6 6 6 6 6 14 10 8.0 6.0 5.0 3.7 3.0 2.0 1.8 10 volt @ 85°C (7 volt @ 125°C) TARQ225(*)010 TARQ335(*)010 TARR475(*)010 TARR685(*)010 TARR106(*)010 TARS156(*)010 TARS226(*)010 TARW336(*)010 TARW476(*)010 Q Q R R R S S W W 2.2 3.3 4.7 6.8 10 15 22 33 47 0.5 0.5 0.5 0.5 0.8 1.2 1.5 2.6 3.8 4 4 4 6 6 6 6 6 6 14 10 8.0 6.0 5.0 3.7 2.7 2.1 1.7 15 volt @ 85°C (10 volt @ 125°C) TARQ155(*)015 TARQ225(*)015 TARR335(*)015 TARR475(*)015 TARR685(*)015 TARS106(*)015 TARS156(*)015 TARW226(*)015 TARW336(*)015 Q Q R R R S S W W 1.5 2.2 3.3 4.7 6.8 10 15 22 33 0.5 0.5 0.5 0.6 0.8 1.2 1.5 2.6 4.0 4 4 4 4 6 6 6 6 6 14 8.0 6.0 5.0 4.0 3.2 2.5 2.0 1.6 20 volt @ 85°C (13 volt @ 125°C) TARQ105(*)020 TARQ155(*)020 TARR225(*)020 TARR335(*)020 TARR475(*)020 TARS685(*)020 TARS106(*)020 TARW156(*)020 TARW226(*)020 Q Q R R R S S W W 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 0.5 0.5 0.5 0.5 0.8 1.1 1.6 2.4 3.5 4 4 4 4 4 6 6 6 6 Capacitance μF DCL (μA) Max. DF % Max. ESR Max. (Ω) @ 100 kHz 25 volt @ 85°C (17 volt @ 125°C) 6.3 volt @ 85°C (4 volt @ 125°C) TARQ335(*)006 TARQ475(*)006 TARR685(*)006 TARR106(*)006 TARR156(*)006 TARS226(*)006 TARS336(*)006 TARW476(*)006 TARW686(*)006 Case Size Q Q Q R R R S S S W 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 0.5 0.5 0.5 0.5 0.5 0.7 0.9 1.4 1.5 3.0 3 3 3 3 3 3 4 4 4 4 20 16 12 8.0 6.0 5.0 4.0 3.1 2.5 2.0 35 volt @ 85°C (23 volt @ 125°C) TARQ104(*)035 TARQ154(*)035 TARQ224(*)035 TARQ334(*)035 TARQ474(*)035 TARR684(*)035 TARR105(*)035 TARR155(*)035 TARS225(*)035 TARS335(*)035 TARS475(*)035 TARW685(*)035 TARW106(*)035 Q Q Q Q Q R R R S S S W W 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.9 1.3 1.9 2.8 3 3 3 3 3 3 3 3 3 4 4 4 4 26 21 17 15 13 10 8.0 6.0 5.0 4.0 3.0 2.5 2.0 50 volt @ 85°C (33 volt @ 125°C) TARQ104(*)050 TARQ154(*)050 TARQ224(*)050 TARR334(*)050 TARR474(*)050 TARR684(*)050 TARR105(*)050 TARS155(*)050 TARS225(*)050 TARW335(*)050 TARW475(*)050 Q Q Q R R R R S S W W 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.9 1.3 1.9 3 3 3 3 3 3 3 4 4 4 4 26 21 17 15 13 10 8.0 5.0 3.5 3.0 2.5 (*) Insert capacitance tolerance code; M for ±20% and K for ±10% NOTE: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size. 18 12 7.0 5.5 4.5 3.7 2.8 2.3 1.9 101 Axial Capacitors Tape and Reel Packaging SOLID TANTALUM AXIAL TAR AND TAA TAPE AND REEL PACKAGING FOR AUTOMATIC COMPONENT INSERTION TAR and TAA series are supplied as standard on axial bandolier, in reel format or ‘ammo’ pack for use on high speed axial automatic insertion equipment, or preforming machines. TAPE SPECIFICATION The tape format is compatible with standards for component taping set out by major manufacturers of axial automatic insertion equipment. REEL CONFIGURATION Taper this end Colored tape - + White tape 30 max. G 400 max. P n Shape: Circular or Octagonal K 7.00 max. E L PACKAGING QUANTITIES TAR DIMENSIONS: For reels Case Size Number of Pieces E max Q 3000 G max R 3000 S 2000 W 2000 K L P millimeters (inches) 1.60 (0.063) 1.20 (0.047) Component body shall be located centrally within a window, width K, where K is 1.40 (0.060) greater than the primary body length 52.4 ± 1.50 (2.060 ± 0.060) 5.00 ± 0.50 (0.200 ± 0.020) PACKAGING QUANTITIES TAA leader max 400 (15.75) For reels, Standard Suffix G trailer max 30.0 (1.200) Will allow for unhindered reeling and unreeling of the taped components. Preferred dimensions 73.0 (2.870) spacing. Case Size Number of Pieces A 3500 B 2500 C 500 D 400 n For reels, Suffix K Case Size Number of Pieces A 1500 B 1000 C 250 D 250 105