TCH9227M016W0040U

TCH LOW ESR HERMETIC SERIES SMD Low ESR Conductive Polymer Capacitors in Hermetic package, COTS-Plus FEATURES • • • • • • • MARKING Polarity Band (Anode+) 107V XXXXX Elektra Award 2015 APPLICATIONS 9 CASE Polymer LOGO Aerospace & Hi-Rel applications Low ESR conductive polymer electrode 100% surge current tested Ceramic case hermetic packaging Stability under humidity and ambient atmosphere exposure Large case sizes including CTC-21D provide high capacitance values Specific codes meet NASA EEE-INST-002, Level 2 requirements • • • • Capacitance Value in pF 107 = 100µF Rated Voltage Code V = 35V Aerospace Defence Power supplies Pulse power ID Code CASE DIMENSIONS: millimeters (inches) Code Type L W H Max. W1 W2 A S Min. 9 (CTC-21D) J-lead (C-shape) 12.00 ± 0.50 (0.472 ± 0.020) 12.50 ± 0.50 (0.492 ± 0.020) 8.45 (0.333) 12.30 ± 0.50 (0.484 ± 0.020) 4.15 ± 0.10 (0.163 ± 0.004) 2.30 ± 0.50 (0.091 ± 0.020) 6.50 (0.256) 9 (CTC-21D) J-lead (L-shape) 11.50 ± 0.50 (0.453 ± 0.020) 12.50 ± 0.50 (0.492 ± 0.020) 6.15 (0.242) 12.50 ± 0.50 (0.492 ± 0.020) - 1.90 ± 0.50 (0.075 ± 0.020) 7.00 (0.276) 9 (CTC-21D) Undertab 11.00 ± 0.20 (0.433 ± 0.008) 12.50± 0.20 (0.492 ± 0.008) 5.95 (0.234) 10.50± 0.20 (0.413 ± 0.008) - 1.50± 0.20 (0.059 ± 0.008) 7.80 (0.307) ‘J’ Lead Termination (C-shape) ‘J’ Lead Termination (L-shape) Undertab Termination The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-HIRELTANT-0026 | Rev 2 – high reliability tantalum capacitors – 163 TCH LOW ESR HERMETIC SERIES SMD Low ESR Conductive Polymer Capacitors in Hermetic package, COTS-Plus TECHNICAL SPECIFICATIONS Technical Data: All technical data relate to an ambient temperature of +25°C Capacitance Range: 22 μF to 330 μF (for extended range under development, contact manufacturer) Capacitance Tolerance: ±20% Leakage Current DCL: 0.1CV Rated Voltage (VR) ≤ +85°C: 10 16 25 35 50 75 100 Category Voltage (VC) ≤ +125°C: 7 11 17 23 33 50 66 Temperature Range: -55ºC to +125ºC Termination Finish: Gold Plating (Undertab), Gold Plating (J-lead/L-shape), Sn/Pb Plating (J-lead/ C-shape, L-shape) HOW TO ORDER PART NUMBER TCH 9 227 M 016 W 0 040 Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging Qualification Level ESR in mΩ See table above pF code: 1st two digits represent significant figures 3rd digit represents multiplier (number of zeros to follow) M = ±20% W = Waffle 010 = 10Vdc 016 = 16Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc 075 = 75Vdc 100 = 100Vdc 0 = Standard (contact manufacturer) S = Space (according to NASA EEE-INST-002, Level 2 requirements) # Termination C = ‘J’ lead C-shape (Sn/Pb) J = ‘J’ lead L-shape (Gold) L = ‘J’ lead L-shape (Sn/Pb) U = Undertab C, L = Non RoHS LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. CAPACITANCE AND VOLTAGE RANGE (CASE CODE BEFORE THE BRACKETS) Capacitance µF 22 33 47 68 100 150 220 330 Code 226 336 476 686 107 157 227 337 Rated Voltage DC (VR) at 85ºC 10V (A) 16V (C) 25V (E) 35V (V) 50V (T) 9(70) 9(40) 9(40) 9(50) 75V (P) 9(120) 100V (A) 9(150) 9(55) 9(55) Released ratings, (ESR ratings in mOhms in parentheses) 164 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-HIRELTANT-0026 | Rev 2 – high reliability tantalum capacitors – TCH LOW ESR HERMETIC SERIES SMD Low ESR Conductive Polymer Capacitors in Hermetic package, COTS-Plus RATINGS & PART NUMBER REFERENCE Part No. Case Size Capacitance (μF) Rated Voltage (V) Rated Temperature (ºC) TCH9337M010W0040# 9 330 10 85 TCH9227M016W0040# 9 220 16 85 TCH9157M025W0050# 9 150 25 85 TCH9107M035W0055# TCH9157M035W0055# 9 9 100 150 35 35 85 85 TCH9476M050W0070# TCH9476M050WS070C 9 9 47 47 50 50 85 85 TCH9336M075W0120# TCH9336M075WS120C 9 9 33 33 75 75 85 85 TCH9226M100W0150# TCH9226M100WS150C 9 9 22 22 100 100 85 85 Category Voltage (V) Category Temperature (ºC) 10 Volt @ 85ºC DCL Max. (μA) DF Max. (%) ESR Max. @ 100kHz (mΩ) 25ºC 85ºC 125ºC 100kHz RMS Current (A) Endurance at 85ºC (hrs) 7 125 330 8 40 3.16 2.84 1.26 2000 10 125 352 8 40 3.16 2.84 1.26 10000 17 125 375 8 50 2.83 2.55 1.13 10000 23 23 125 125 350 525 8 8 55 55 2.69 2.69 2.42 2.42 1.08 1.08 10000 2000 33 33 125 125 235 235 8 8 70 70 2.39 2.39 2.15 2.15 0.96 0.96 10000 10000 50 50 125 125 248 248 8 8 120 120 1.82 1.82 1.64 1.64 0.73 0.73 2000 2000 66 66 125 125 220 220 8 8 150 150 1.63 1.63 1.47 1.47 0.65 0.65 10000 10000 16 Volt @ 85ºC 25 Volt @ 85ºC 35 Volt @ 85°C 50 Volt @ 85°C 75 Volt @ 85°C 100 Volt @ 85°C All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with a maximum DC bias of 2.2V. DCL is measured at rated voltage after 5 minutes. Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All TCH products are MSL1. RECOMMENDED DERATING FACTOR Voltage and temperature derating as percentage of Vr 100% 95% 90% 85% 80% 75% 70% Rated Voltage Recommended Application Voltage for Vr ≤ 10V Recommended Application Voltage for Vr ≥ 16V 67% 65% 60% 60% 55% 54% 50% -55ºC 85ºC 125ºC The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-HIRELTANT-0026 | Rev 2 – high reliability tantalum capacitors – 165 TCH LOW ESR HERMETIC SERIES SMD Low ESR Conductive Polymer Capacitors in Hermetic package, COTS-Plus QUALIFICATION TABLE TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage Mechanical Shock/Vibration 166 Condition TCH low ESR hermetic series (Temperature range -55ºC to +125ºC) Characteristics Determine after application of rated voltage for 2000 (10 000) +48/0 hours at 85±2ºC and then leaving min. 2 hours at room temperature. Also determine of 125ºC temperature, category voltage for 2000 +48/-0 hours and then leaving min. 2 hours at room temperature. Power supply impedance to be < 3Ω. Store at 125ºC, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 40ºC and 90% relative humidity for 56 days, with no applied voltage. Stabilize at room temperature and humidity for min. 2 hours before measuring. Step 1 2 3 4 5 6 Temperature°C +20 -55 +20 +85 +125 +20 Duration (min) 15 15 15 15 15 15 Test temperature: 85ºC+3/0ºC Surge voltage: 1.3 x rated voltage (for Ur ≤ 50V), 1.15 x rated voltage (for Ur > 50V) Series protection resistance: 33Ω (for Ur ≤ 50V), 1000Ω (for Ur > 50V) Discharge resistance: 33Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge MIL-STD-202, Method 213, Condition C, 100 G peak MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 2 x initial limit ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±10% of initial value DF initial limit ESR 1.25 x initial limit +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC DCL IL* n/a IL* 10 x IL* 12.5 x IL* IL* ΔC/C n/a +0/-20% ±5% +20/-0% +30/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* 1.5 x IL* 1.5 x IL* 1.25 x IL* DF ESR 1.25 x IL* 1.25 x IL* 1.25 x IL* Visual examination no visible damage DCL initial limit ΔC/C within ±20% of initial value DF initial limit ESR 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±10% of initial value DF initial limit ESR 1.25 x initial limit The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-HIRELTANT-0026 | Rev 2 – high reliability tantalum capacitors –