TCME687M004R0010E

TCM Series – Multianode Ultra Low ESR - J-Lead TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors FEATURES • Conductive Polymer Electrode, Multianode Design • Benign Failure Mode Under Recommended Use Conditions • Extremely Low ESR • 3x Reflow 260°C Compatible • 100% Surge Current Tested • Volumetric Efficiency • High Frequency Capacitance Retention LEAD-FREE COMPATIBLE COMPONENT SnPb termination option is not RoHS compliant. Elektra Award 2010 APPLICATIONS • Telecommunication Routers • Base Stations with High Power DC/DCs CASE DIMENSIONS: millimeters (inches) MARKING E, U, V CASE AVX LOGO Polymer Polarity Band (Anode+) EIA Code EIA Metric L±0.20 (0.008) W+0.20 (0.008) –0.10 (0.004) H+0.20 (0.008) –0.10 (0.004) W1 ±0.20 (0.008) A+0.30 (0.012) –0.20 (0.008) E 2917 7343-43 7.30 (0.287) S Min. 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) U 2924 7361-43 7.30 (0.287) 6.10 (0.240) 4.10 (0.162) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173) V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. Capacitance Value in pF 337 = 330µF 337 A XXXXX Code Rated Voltage A = 10V ID Code HOW TO ORDER TCM E Type Case Size See table above 108 M 004 Capacitance Code Tolerance Rated DC Voltage pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) M = ±20% 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 040 = 40Vdc 050 = 50Vdc 100 = 100Vdc R 0010 E Packaging ESR in mΩ Additional Character R = Pure Tin 7" Reel S = Pure Tin 13" Reel H = Tin Lead 7" Reel K = Tin Lead 13" Reel (for V case use only R or S option) E = Black resin (it is possible to order PN without "E" as identical product) TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Temperature Range: Termination Finish: All technical data relate to an ambient temperature of +25ºC 10μF to1000μF ±20% 0.1CV -55ºC to +125ºC Sn Plating (standard) and SnPb Plating NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the KYOCERA AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance. 192 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0028 | Rev 2 – polymer, tantalum and niobium oxide capacitors – TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 220 227 330 337 470 477 680 687 1000 108 2.5V (e) E(10,12) E(10,12) E(6,10,12) 4V (G) 6.3V (J) E(10,12) E(10,12) E(6,8,10,12) 10V (A) E(25) E(6,10,15) E(15, 25) E(10,15) E(7,10,12) E(12) Rated Voltage DC (VR) to 105°C 16V (C) 20V (D) 25V (E) E(25) E(25,40) E(25,40) E(15, 25) E(25) E(25) E(25,40) E(60) E(60) E(50) E(30,50) 35V (V) E(25) E(60) E(45,60) 40V (G) 50V (T) E(100) E(75) E(50,75) 100V (A) V(50) U(40,50) Released ratings, (ESR ratings in mOhms in parentheses) Engineering Samples - please contact KYOCERA AVX Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE Part Number Case Size Capacitance (μF) Rated Voltage (V) TCME477M002#0010E TCME477M002#0012E TCME687M002#0010E TCME687M002#0012E TCME108M002#0006E TCME108M002#0010E TCME108M002#0012E E E E E E E E 470 470 680 680 1000 1000 1000 2.5 2.5 2.5 2.5 2.5 2.5 2.5 TCME477M004#0010E TCME477M004#0012E TCME687M004#0010E TCME687M004#0012E TCME108M004#0006E TCME108M004#0008E TCME108M004#0010E TCME108M004#0012E E E E E E E E E 470 470 680 680 1000 1000 1000 1000 4 4 4 4 4 4 4 4 TCME337M006#0010E TCME337M006#0015E TCME477M006#0007E TCME477M006#0010E TCME477M006#0012E TCME687M006#0012E E E E E E E 330 330 470 470 470 680 6.3 6.3 6.3 6.3 6.3 6.3 TCME227M010#0025E TCME337M010#0006E TCME337M010#0010E TCME337M010#0015E TCME477M010#0015E TCME477M010#0025E E E E E E E 220 330 330 330 470 470 10 10 10 10 10 10 TCME107M016#0025E TCME157M016#0025E TCME157M016#0040E TCME227M016#0025E TCME227M016#0040E TCME337M016#0015E TCME337M016#0025E E E E E E E E 100 150 150 220 220 330 330 16 16 16 16 16 16 16 Maximum Operating Temperature (ºC) DCL Max. (μA) 2.5 Volt @ 105°C 125 117.5 125 117.5 125 170 125 170 125 250 125 250 125 250 4 Volt @ 105°C 125 188 125 188 125 272 125 272 125 400 125 400 125 400 125 400 6.3 Volt @ 105°C 125 198 125 198 125 282 125 282 125 282 125 408 10 Volt @ 105°C 125 220 125 330 125 330 125 330 125 470 125 470 16 Volt @ 105°C 125 160 125 240 125 240 125 352 125 352 125 528 125 528 100kHz RMS Current (mA) DF Max. (%) ESR Max. @ 100kHz (mΩ) 45ºC 85ºC 125ºC 10 10 10 10 10 10 10 10 12 10 12 6 10 12 6400 5800 6400 5800 8300 6400 5800 4500 4100 4500 4100 5800 4500 4100 1600 1500 1600 1500 2100 1600 1500 3 3 3 3 3 3 3 8 8 8 8 8 8 8 8 10 12 10 12 6 8 10 12 6400 5800 6400 5800 8300 7200 6400 5800 4500 4100 4500 4100 5800 5000 4500 4100 1600 1500 1600 1500 2100 1800 1600 1500 3 3 3 3 3 3 3 3 8 8 10 10 10 8 10 15 7 10 12 12 6400 5200 7700 6400 5800 5800 4500 3600 5400 4500 4100 4100 1600 1300 1900 1600 1500 1500 3 3 3 3 3 3 8 8 8 8 10 10 25 6 10 15 15 25 4000 8300 6400 5200 5200 4000 2800 5800 4500 3600 3600 2800 1000 2100 1600 1300 1300 1000 3 3 3 3 3 3 8 8 8 8 8 8 8 25 25 40 25 40 15 25 4000 4000 3200 4000 3200 5200 4000 2800 2800 2200 2800 2200 3600 2800 1000 1000 800 1000 800 1300 1000 3 3 3 3 3 3 3 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0028 | Rev 2 – polymer, tantalum and niobium oxide capacitors – MSL 193 TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors Part Number Case Size Capacitance (μF) Rated Voltage (V) TCME686M020#0025E TCME107M020#0025E TCME157M020#0025E TCME157M020#0040E E E E E 68 100 150 150 20 20 20 20 TCME336M025#0060E TCME476M025#0060E TCME686M025#0050E TCME107M025#0030E TCME107M025#0050E E E E E E 33 47 68 100 100 25 25 25 25 25 TCME226M035#0025E TCME336M035#0060E TCME476M035#0045E TCME476M035#0060E E E E E 22 33 47 47 35 35 35 35 TCMU686M040#0040E TCMU686M040#0050E U U 68 68 40 40 TCME156M050#0100E TCME226M050#0075E TCME336M050#0050E TCME336M050#0075E E E E E 15 22 33 33 50 50 50 50 TCMV106M100#0050E V 10 100 Maximum Operating Temperature (ºC) DCL Max. (μA) 100kHz RMS Current (mA) DF Max. (%) ESR Max. @ 100kHz (mΩ) 45ºC 85ºC 125ºC 8 8 10 10 25 25 25 40 4000 4000 4000 3200 2800 2800 2800 2200 1000 1000 1000 800 3 3 3 3 8 8 8 10 10 60 60 50 30 50 2600 2600 2900 3700 2900 1800 1800 2000 2600 2000 700 700 700 900 700 3 3 3 3 3 8 8 8 8 25 60 45 60 4000 2600 3000 2600 2800 1800 2100 1800 1000 700 800 700 3 3 3 3 10 10 40 50 3300 2900 2300 2000 800 700 3 3 10 10 10 10 100 75 50 75 2000 2300 2900 2300 1400 1600 2000 1600 500 600 700 600 3 3 3 3 8 50 2900 2000 700 3 20 Volt @ 105°C 125 136 125 200 125 300 125 300 25 Volt @ 105°C 125 82.5 125 117.5 125 170 125 250 125 250 35 Volt @ 105°C 125 77 125 115.5 125 164.5 125 164.5 40 Volt @ 105°C 125 272 125 272 50 Volt @ 105°C 125 75 125 110 125 165 125 165 100 Volt @ 105°C 125 100 MSL Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 259. NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards. For Vr ≤ 10V 100% RECOMMENDED DERATING FACTOR 95% 194 Operating Temperature ≤85°C 105°C 125°C 90% 90% 60% 80% 80% 54% 95% 90% Voltage and temperature derating as percentage of Vr. Rated voltage ≤10V ≥16V For Vr ≥ 16V 100% Rated Voltage 85% 80% Rated Voltage 90% Recommended Application Voltage 85% 80% 75% 75% 70% 67% 65% 60% 60% 55% Recommended Application Voltage 67% 65% 60% 55% 50% -55% 70% 54% 50% 85ºC 105ºC 125ºC -55% 85ºC The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0028 | Rev 2 – polymer, tantalum and niobium oxide capacitors – 105ºC 125ºC TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors QUALIFICATION TABLE TCM series (Temperature range -55°C to +125°C) TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage Condition Apply rated voltage (Ur) at 105°C and category voltage (Uc) at 125°C for 2000 hours through a circuit impedance of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 125ºC, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 65ºC and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step 1 2 3 4 5 6 Temperature°C +20 -55 +20 +85 +125 +20 Duration(min) 15 15 15 15 15 15 Apply 1.3x category voltage (Uc) at 125ºC for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge/ discharge resistance of 1000Ω Visual examination DCL ΔC/C DF ESR Visual examination DCL ΔC/C DF ESR Visual examination DCL ΔC/C DF ESR Characteristics no visible damage 1.25 x initial limit within ±20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 2 x initial limit within ±20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 3 x initial limit within +30/-20% of initial value 1.5 x initial limit 2 x initial limit +20ºC -55ºC +20ºC +85ºC +125ºC DCL IL* n/a IL* ΔC/C n/a +0/-20% ±10% +20/-0% +30/-0% ±10% DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* Visual examination DCL ΔC/C DF 10 x IL* 12.5 x IL* +20ºC IL* no visible damage initial limit within +20/-30% of initial value 1.25 x initial limit *Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0028 | Rev 2 – polymer, tantalum and niobium oxide capacitors – 195 TCM Series Conductive Polymer Solid Electrolytic Chip Multianode Capacitors SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP : Conductive Polymer 196 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0028 | Rev 2 – polymer, tantalum and niobium oxide capacitors –