TCNK107M006R0200

TCN Series – High CV/cc - Undertab TCN Series Highest CV/CC Conductive Polymer Chip Capacitors Undertab FEATURES APPLICATIONS • • • • • • Consumer Applications (e.g. Mobiles, MP3 etc.) • Bulk Decoupling of SoC (System on Chip) Highest CV/cc in Broad Range of Low Profiles Conductive Polymer Electrode Benign Failure Mode Under Recommended use Conditions Lower ESR Undertab Terminations Layout: ‒ High Volumetric Efficiency ‒ High PCB Assembly Density ‒ High Capacitance in Smaller Dimensions • 3x Reflow 260°C Compatible • 100% Surge Current Tested • 5 Case Sizes Available LEAD-FREE COMPATIBLE COMPONENT Polarity Band (Anode+) W W L W H WN AP WP S AN WN CASE DIMENSIONS millimeters (inches) Code EIA Code EIA Metric L±0.20 (0.008) W+0.20 (0.008) -0.10 (0.004) H max. WP±0.10 (0.004) WN±0.10 (0.004) AP±0.10 (0.004) AN±0.10 (0.004) S Min. T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039) X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) 3.25 (0.128) 3.25 (0.128) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) 4.30 ±0.30 (0.169 ±0.012) 1.30 ±0.30 (0.051 ±0.012) 4.40 (0.173) Z 2917 7343-15 7.30 ±0.30 (0.287 ±0.012) 1.50 (0.059) 2.40 (0.094) 2.40 (0.094) 1.30 ±0.30 (0.051 ±0.012) 4 2924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) 8 2924 7361-20 7.30 ±0.30 (0.287 ±0.012) 6.10 (0.240) 2.00 (0.079) 4.45 (0.175) 4.45 (0.175) 1.60 ±0.30 (0.063 ±0.012) 1.60 ±0.30 (0.063 ±0.012) 3.80 (0.150) MARKING T, X, Z CASE Polymer Logo 4, 8 CASE Polymer Logo HOW TO ORDER TCN T 157 M 006 R 0200 E Additional Character Type Case Size E = Black Resin (it is possible to order PN without "E" as identical product) See table above ESR in mΩ Packaging Capacitance Code pF code: 1st two digits represent significant figures 3rd digit represents multiplier (number of zeros to follow) R = Pure Tin 7" Reel S = Pure Tin 13" Reel A= NiPdAu 7“ Reel B= NiPdAu 13” Reel A,B = only case 8 and Z Tolerance M = ± 20% Rated DC Voltage 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 051722 – polymer, tantalum and niobium oxide capacitors – 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc 203 TCN Series Highest CV/CC Conductive Polymer Chip Capacitors Undertab TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage DC (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: ≤ +85°C: ≤ +105ºC: ≤ +85ºC: ≤ +105ºC: All technical data relate to an ambient temperature of +25°C 4.7 μF to 1500 μF ±20% 0.1CV 6.3 10 16 20 25 35 50 5 8 13 16 20 28 40 8 13 21 26 33 46 65 6 10 16 20 25 35 50 -55°C to +105°C NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the KYOCERA AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance. CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 6.3V (J) 10V (A) Rated Voltage DC to 85°C / 0.66DC to 105°C 16V (C) 20V (D) 25V (E) 4.7 475 10 106 22 226 33 336 T(200) 47 476 T(150) 35V (V) 50V (T) T(200) T(150, 200) T(200) 4(200) 100 107 150 157 Z(100) 220 227 4(70) 4(100) 330 337 4(70) 4(100) 470 477 680 687 1000 108 4(55) 1500 158 4(55) T(200) X(100) X(50) X(100) X(150)/Z(100,150) 4(100) 4(100)/8(100) 4(70)/8(70) 4(100) 4(70,100) 4(70) Released ratings, (ESR ratings in mOhms in parentheses) Engineering Samples - Please Contact KYOCERA AVX Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. 204 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 063022 – polymer, tantalum and niobium oxide capacitors – TCN Series Highest CV/CC Conductive Polymer Chip Capacitors Undertab RATINGS & PART NUMBER REFERENCE Case Size Capacitance (μF) Rated Voltage (V) Maximum Operating Temperature (ºC) TCNT157M006#0200E TCNX477M006#0050E TCN4108M006#0055E TCN4158M006#0055E T X 4 4 150 470 1000 1500 6.3 6.3 6.3 6.3 105 85 85 85 TCN4687M010#0070E 4 680 10 105 TCNT336M016#0200E TCNT476M016#0150E TCNX157M016#0100E TCN4227M016#0070E TCN4337M016#0070E TCN4477M016#0070E TCN4477M016#0100E T T X 4 4 4 4 33 47 150 220 330 470 470 16 16 16 16 16 16 16 105 105 105 105 105 105 105 TCNZ107M020#0100E TCN4227M020#0100E TCN4337M020#0100E Z 4 4 100 220 330 20 20 20 105 85 105 TCNT226M025#0200E TCNX476M025#0100E TCN4107M025#0100E TCN4157M025#0070E TCN8157M025#0070E TCN4227M025#0100E T X 4 4 8 4 22 47 100 150 150 220 25 25 25 25 25 25 105 105 105 105 105 105 TCNT475M035#0200E TCNT106M035#0150E TCNT106M035#0200E TCNZ476M035#0100E TCNX476M035#0150E TCNZ476M035#0150E TCN4107M035#0100E TCN8107M035#0100E T T T Z X Z 4 8 4.7 10 10 47 47 47 100 100 35 35 35 35 35 35 35 35 105 105 105 105 105 105 105 105 TCN4336M050#0200E 4 33 50 85 Part Number DCL Max. (μA) DF Max. (%) ESR Max. @ 100kHz (mΩ) 45ºC 85ºC 105ºC 100kHz RMS Current (mA) Product Category MSL 6.3 Volt @ 85°C 90 282 600 900 10 10 20 20 200 50 55 55 700 1900 1860 1860 500 1300 1302 1302 300 – – – 3 5 5 5 4 5 4 4 680 20 70 1650 1155 660 3 4 52.8 75.2 240 352 528 752 752 6 6 6 20 20 20 20 200 150 100 70 70 70 100 700 800 1300 1650 1650 1650 1380 500 600 900 1155 1155 1155 966 300 400 600 660 660 660 552 3 3 3 2 3 3 3 4 4 4 4 4 4 4 8 10 20 100 100 100 1300 1380 1380 900 966 966 600 – 552 3 5 3 4 4 4 6 6 6 6 8 10 200 100 100 70 70 100 700 1300 1380 1650 1650 1380 500 900 966 1155 1155 966 300 600 552 660 660 552 3 2 2 2 2 3 4 5 4 4 3 4 10 10 10 10 10 10 10 10 200 150 200 100 150 150 100 100 700 800 700 1300 1100 1100 1380 1380 500 600 500 900 800 800 966 966 300 400 300 600 500 500 552 552 3 3 3 3 3 3 2 2 4 4 4 4 4 4 3 3 12 200 970 679 - 5 3 10 Volt @ 85°C 16 Volt @ 85°C 20 Volt @ 85°C 200 440 660 25 Volt @ 85°C 55 117.5 250 375 375 550 35 Volt @ 85°C 16.5 35 35 165 165 165 350 350 50 Volt @ 85°C 165 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 259. NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size to the same reliability standards. RECOMMENDED DERATING FACTOR Voltage and temperature derating as percentage of Vr Product Category 2 Product Category 3 Product Category 5 100% 100% 100% 95% 90% 85% 80% 75% 70% Rated Voltage 95% 90% Recommended Application Voltage for Vr ≤ 10V 85% 80% Recommended Application Voltage for Vr ≥ 16V 75% 70% 65% 65% 60% 60% 55% 55% 50% -55ºC 85ºC 105ºC Rated Voltage 95% Recommended Application Voltage for Vr ≤ 10V Recommended Application Voltage for Vr ≥ 16V 50% -55ºC 90% 85% 80% 80% 75% 72% 64% 70% Rated Voltage Recommended Application Voltage for Vr ≤ 10V Recommended Application Voltage for Vr ≥16V 65% 60% 55% 85ºC 105ºC 50% -55ºC The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 063022 – polymer, tantalum and niobium oxide capacitors – 85ºC 205 TCN Series Highest CV/CC Conductive Polymer Chip Capacitors Undertab PRODUCT CATEGORY 2, 3 (TEMPERATURE RANGE -55°C TO +105°C) TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage Mechanical Shock Vibration *Initial Limit 206 Condition Characteristics Apply rated voltage (Ur) at 85ºC for 2000 hours through a circuit impedance of ≤0.1Ω/V (all CATEGORIES). And / or apply rated voltage (Ur) (CATEGORY 2) or 0.8x rated voltage (CATEGORY 3) at 105°C for 2000 hours through a circuit impedance of ≤0.1Ω/V. Always stabilize at room temperature for 1-2 hours before measuring. Store at 105ºC, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 65ºC and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step 1 2 3 4 5 6 Temperature°C +20 -55 +20 +85 +105 +20 Duration(min) 15 15 15 15 15 15 Apply 1.3x rated voltage (Ur) at 105ºC for CATEGORY 2, or apply 1.3x 0.8x rated voltage (Ur) at 105ºC for CATEGORY 3 for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω MIL-STD-202, Method 213, Condition C MIL-STD-202, Method 204, Condition D Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL (VR ≤ 75V) 1.25 x initial limit DCL (VR > 75V) 2 x initial limit ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 3 x initial limit ΔC/C within +30/-20% of initial value DF 1.5 x initial limit ESR 2 x initial limit +20ºC -55ºC +20ºC +85ºC +105ºC DCL IL* n/a IL* 10 x IL* 12.5 x IL* IL* ΔC/C n/a +0/-20% ±5% +20/-0% +30/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* DF Visual examination no visible damage DCL initial limit ΔC/C within +10/-20% of initial value for Vr ≤ 10V within +20/-30% of initial value for Vr ≥ 16V DF 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR 1.25 x initial limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 110121 – polymer, tantalum and niobium oxide capacitors – +20ºC TCN Series Highest CV/CC Conductive Polymer Chip Capacitors Undertab PRODUCT CATEGORY 5 (TEMPERATURE RANGE -55°C TO +85°C) TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage Mechanical Shock Vibration *Initial Limit Condition Characteristics Apply rated voltage (Ur) at 85ºC for 2000 hours through a circuit impedance of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 85ºC, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 65ºC and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step 1 2 3 4 5 Temperature°C +20 -55 +20 +85 +20 Duration(min) 15 15 15 15 15 Apply 1.3x rated voltage (Ur) at 85ºC for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω MIL-STD-202, Method 213, Condition C MIL-STD-202, Method 204, Condition D Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 5 x initial limit ΔC/C within +40/-20% of initial value DF 1.5 x initial limit ESR 2 x initial limit +20ºC -55ºC +20ºC +85ºC DCL IL* n/a IL* 10 x IL* IL* ΔC/C n/a +0/-20% ±5% +20/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* IL* DF Visual examination no visible damage DCL initial limit ΔC/C within +10/-20% of initial value for Vr ≤ 10V within +20/-30% of initial value for Vr ≥ 16V DF 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR 1.25 x initial limit +20ºC Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 110121 – polymer, tantalum and niobium oxide capacitors – 207 TCN Series Highest CV/CC Conductive Polymer Chip Capacitors Undertab SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP : Conductive Polymer 208 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 010521 – polymer, tantalum and niobium oxide capacitors –