TCNX476M035R0150E

Conductive Polymer Product - J-CAPTM Series PRODUCT SPECIFICATIONS : Nominal Capacitance @ 120Hz 47 µF Capacitance Tolerance M = ± 20% Rated Voltage DC (VR) < 85oC 35 V Category Voltage DC (VC) < 105oC 28 V Surge Voltage (VS) < 85oC 46 V 35 V < 105oC Temperature Range -55oC to +105oC Direct Leakage Current max. @ VR 165 µA Dissipation Factor max. @ 120Hz 10 % ESR max. @ 100kHz 0.15 Ohm Typical weight (X case) 190 mg Pb LEAD-FR EE LEAD-FREE COMPATIBLE COMPONENT Moisture sensitivity level: meets MSL 4 Reflow specification: meets J-STD-020 standard 100% surge current tested All technical data relates to an ambient temperature of +25°C, Capacitance is measured at 120Hz, 0.5RMS with DC bias of 2.2V. DCL is measured at rated voltage after 5 minutes ESR allowed to move up to 1.25 times catalogue limit post mounting AVX reserves the rights to supply higher voltage rating in the same case size, to the same reliability standards RMS value of Ripple Current (mA) @100kHz 45˚C 85˚C 105˚C 1100 800 500 RMS value of Ripple Voltage (mV) @100kHz 45˚C 85˚C 105˚C 165 120 75 HOW TO ORDER: TCN X 476 M 035 # 0150 E Type Case code Capacitance Value Cap. Tolerance Rated DC Packaging ESR in mOhms Black Resin DRAWING AND DIMENSIONS: AVX LOGO Polymer Capacitance Value in pF 476 = 47 µF Rated Voltage V = 35 V 476 V XXXXX Polarity Band (Anode+) ID Code Energy (mJ) 18.21 Energy /volume (mJ/cm3) 387 Energy /area (mJ/cm2) 58 Conductive Polymer Product - J-CAPTM Series CASE DIMENSIONS: millimetres Case EIA AVX L ±0.2 W +0.2 –0.1 H max. Ap ±0.1 Wp ±0.1 An ±0.1 Wn ±0.1 S (min) 7343-15 X 7.3 4.3 1.5 2.0 3.25 3.2 3.25 2.1 PACKAGING INFORMATION: Reel Size (#) R = 7” Reel Pure Tin Termination S = 13” Reel Pure Tin Termination Quantity 1000 5000 Tape Width 12 mm 12 mm AMERICAS AVX Greenville, SC Tel: 864-967-2150 EUROPE ASIA-PACIFIC ASIA-KED (KYOCERA Electronic Devices) AVX Limited, England Tel: +44-1252-770000 AVX/Kyocera (S) Pte Ltd, Singapore Tel:+65-6286-7555 AVX S.A.S. , France Tel: +33-1-69-18-46-00 AVX/Kyocera, Asia Ltd., Hong Kong Tel: +852-2363-3303 KED Hong Kong Ltd., Shenzen Tel: +86-755-3398-9600 AVX GmbH, Germany Tel: +49-0811-95949-0 AVX/Kyocera Yuhan Hoesa, South Korea Tel: +82-2785-6504 KED Company Ltd., Shanghai Tel: +86-21-3255-1833 AVX SRL, Italy Tel: +39-02-614-571 AVX/Kyocera HK Ltd., Taiwan Tel: +886-2-2656-0258 AVX Czech Republic Tel: +420-57-57-57-521 AVX/Kyocera (M) Sdn Bhd, Malaysia Tel: +60-4228-1190 AVX/ELCO UK Tel: +44-1638-675000 AVX/Kyocera International Trading Co. Ltd., Shanghai Tel: +86-21-3255-1933 ELCO Europe GmbH Tel: +49-2741-299-0 AVX S.A.,Spain Tel: +34-91-63-97-197 AVX Benelux Tel: +31-187-489-337 KED Hong Kong Ltd. Tel: +852-2305-1080/1223 KED Hong Kong Ltd., Beijing Tel: +86-10-5869-4655 KED Taiwan Ltd. Tel: +886-2-2950-0268 KED Korea Yuhan Hoesa, South Korea Tel: +82-2-783-3604/ 6126 AVX/Kyocera Asia Ltd., Shenzen Tel: +86-755-3336-0615 KED (S) Pte Ltd., Singapore Tel: +65-6509-0328 AVX/Kyocera International Trading Co. Ltd., Beijing Tel: +86-10-6588-3528 Kyocera Corporation, Japan Tel: +81-75-604-3449 AVX/Kyocera India Liaison Office Tel: +91-80-6450-0715 Issued by: AVX Technical Marketing Team Tantalum Division Technical assistance: Tech-info@avx.com More details at: www.avx.com Version: 12/2018 NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. Specifications are typical and may not apply to all applications. All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our product are made without responsibility or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures are indicated or that measures may not be required. All samples are provided for testing purposes only. Provision of samples shall not constitute any offer of sale nor shall it constitute any commitment of any kind. Samples may not be incorporated in any product offered for commercial sale. Recipient assumes all risks and liability resulting from such testing. Samples are for the exclusive use of the direct recipient and shall not be sold, lent, given, or otherwise transferred to any other party. All unused samples shall be destroyed or returned to AVX.