TCQD336M016R0070

TCQ Series Automotive Conductive Polymer Chip Capacitors FEATURES • Conductive polymer electrode • Benign failure mode under recommended use conditions • Robust design for automotive applications • Meets requirements of AEC-Q200 • Humidity 85°C/85%RH, Vr, (up to 500 or 1000 hours see reference table) • Basic reliability 1%/1000hrs@85°C Vr with 60% confidence level • -55 to +125°C operation temperature • Full voltage range: 4-35V • DCL 0.1 CV • 3x reflow 260°C compatible LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Automotive, DC/DC converters, Telecommunications, Industrial Reference AVX polymer guide for more information. AVX's qualification of TCQ capacitors meets requirements of AEC-Q200. TCQ series is manufactured in an ISO TS 16949 certified facility. MARKING B, D, Y CASE AVX LOGO Polymer Polarity Band (Anode+) CASE DIMENSIONS: millimeters (inches) Capacitance Value in pF 686 = 68µF 686 A XXXXX Rated Voltage A = 10V ID Code Code EIA Code EIA Metric L±0.20 (0.008) W+0.20 (0.008) -0.10 (0.004) H+0.20 (0.008) -0.10 (0.004) W1±0.20 (0.008) A+0.30 (0.012) -0.20 (0.008) S Min. B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. HOW TO ORDER TCQ B Type Case Size See table above 476 M Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = ±20% 006 # Rated DC Voltage Packaging 004 = 4Vdc R = Pure Tin 7" Reel 006 = 6.3Vdc S = Pure Tin 13" Reel 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 0070 ESR in mΩ TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Temperature Range: Reliability: All technical data relate to an ambient temperature of +25°C 4.7 μF to 220 μF ±20% 0.1CV -55°C to +125°C 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance 60% confidence level Meets requirements of AEC-Q200 (for humidity 85°C/85%RH, VR details see reference table) 101215 1 TCQ Series Automotive Conductive Polymer Chip Capacitors CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 Code 335 475 685 106 156 226 336 476 686 107 157 227 Rated Voltage DC (VR) @ 105°C 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) B(200)* B(200)* B(200)* D(70) D(70) B(70) B(70) B(70) B(70)* B(70)* B(70)* D(25,40) D(25,40) D(70) D(70) D(70) D(25,40) D(25), Y(25) Available Ratings, (ESR ratings in mOhms in brackets) *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Size Capacitance (μF) Rated Voltage (V) TCQD227M004#0025 TCQY227M004#0025 D Y 220 220 4 4 TCQB226M006#0070 TCQB336M006#0070 TCQB476M006#0070 TCQD157M006#0025 TCQD157M006#0040 B B B D D 22 33 47 150 150 6.3 6.3 6.3 6.3 6.3 TCQD686M010#0025 TCQD686M010#0040 TCQD107M010#0025 TCQD107M010#0040 D D D D 68 68 100 100 10 10 10 10 TCQD336M016#0070 TCQD476M016#0070 D D 33 47 16 16 TCQD226M020#0070 D 22 20 TCQD156M025#0070 D 15 25 TCQD106M035#0070 D 10 35 DCL (μA) Max DF % Max ESR Max (mΩ) @100kHz 4 Volt @ 105°C 88 6 25 88 6 25 6.3 Volt @ 105°C 13.2 6 70 19.8 6 70 28.2 6 70 90 6 25 90 6 40 10 Volt @ 105°C 68 6 25 68 6 40 100 6 25 100 6 40 16 Volt @ 105°C 52.8 6 70 75.2 6 70 20 Volt @ 105°C 44 6 70 25 Volt @ 105°C 37.5 6 70 35 Volt @ 105°C 35 6 70 25ºC 85ºC 105ºC 125ºC Humidity 85°C/85%RH, Vr (hrs) 3 3 3000 2720 2100 1904 1350 1224 750 680 1000 500 3 3 3 3 3 1336 1336 1336 3000 2372 935 935 935 2100 1660 601 601 601 1350 1067 334 334 334 750 593 500 500 500 1000 1000 3 3 3 3 3000 2372 3000 2372 2100 1660 2100 1660 1350 1067 1350 1067 750 593 750 593 1000 1000 1000 1000 3 3 1793 1793 1255 1255 807 807 448 448 1000 1000 3 1793 1255 807 448 1000 3 1793 1255 807 448 1000 3 1793 1255 807 448 1000 MSL 100kHz RMS Current (mA) Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 218. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. 2 101215 TCQ Series Automotive Conductive Polymer Chip Capacitors RECOMMENDED DERATING FACTOR For Vr ≤ 10V Voltage and temperature derating as percentage of Vr. 100% Rated Voltage 90% Rated voltage ≤10V ≥16V Operating Temperature ≤85°C 105°C 125°C 90% 90% 67% 80% 80% 50% For Vr ≥ 16V 100% 90% 80% Recommended Application Voltage 80% 70% 70% 60% 60% 50% 50% 40% -55ºC 85ºC 105ºC 125ºC Rated Voltage Recommended Application Voltage 40% -55ºC 85ºC 105ºC 125ºC QUALIFICATION TABLE TEST Endurance Storage Life Biased Humidity Temperature Stability Surge Voltage TCQ series (Temperature range -55ºC to +105ºC/125ºC) Characteristics Visual examination no visible damage DCL 2 x initial limit Determine after application of 125ºC temperature, 2/3 rated voltage for 1000 +48/-0 hours and then ΔC/C within +10/-20% of initial value for Vr ≤ 10V leaving 1-2 hours at room temperature. Power supwithin +20/-30% of initial value for Vr ≥ 16V ply impedance to be ≤ 0.1Ω/V. DF 2 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 2x initial limit ΔC/C within +10/-20% of initial value for Vr ≤ 10V 125°C, 0V, 1000h within +20/-30% of initial value for Vr ≥ 16V DF 2 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 2 x initial limit Determine after leaving for 1000 hours at 85±2ºC, 85% relative humidity and rated voltage and then ΔC/C within +35/-5% of initial value recovery 1-2 hours at room temperature. DF 1.5 x initial limit ESR 2 x initial limit Condition Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +125+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 125ºC +3/0ºC Surge voltage: 1.3x 2/3x rated voltage at 125°C Charge/Discharge resistance: 1000±100Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC DCL IL* ΔC/C n/a DF Visual examination no visible damage DCL initial limit ΔC/C within +10/-20% of initial value for Vr ≤ 10V within +20/-30% of initial value for Vr ≥ 16V DF initial limit for Vr ≤ 10V 1.25x initial limit for Ur ≥ 16V ESR 1.25 x initial limit IL* n/a IL* ±20% ±5% IL* IL* 10 x IL* 12.5 x IL* IL* ±20% ±30% ±5% 1.2 x IL* 1.5 x IL* IL* *Initial Limit For use outside of recommended conditions and special request, please contact manufacturer. 101215 3