TCTAL1E475M8R

TCO Series – High Temperature Automotive Polymer Chip Capacitors TCT Series Chip Tantalum Capacitors (Large Capacitance) FEATURES • • • • • Ta-MnO2 technology Low DCL High CV Parameters stability over voltage and time Undertab LF LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • • • • • • • MARKING For high component density PCB design DC/DC Industrial Telecom IoT Home applications Sensors CASE DIMENSIONS: AL AS P PL EIA Code 1206 1206 0805 0805 U 0602 Code millimeters (inches) EIA Metric 3216-12 3216-10 2012-12 2012-10 L±0.20 W±0.20 H±0.10 (0.008) (0.008) (0.004) 3.20 (0.126) 1.60 (0.063) 1.10 (0.043) 3.20 (0.126) 1.60 (0.063) 0.90 (0.035) 2.00 (0.079) 1.25 (0.049) 1.20 (0.047) max. 2.00 (0.079) 1.25 (0.049) 0.90 (0.035) 1.00+0.20-0.00 0.50+0.20-0.00 1005-055 (0.039+0.008-0.000) 0.55 (0.022) max. (0.020+0.008-0.000) W1±0.20 (0.008) 1.20 (0.047) 1.20 (0.047) 0.85 (0.033) 0.85 (0.033) 0.35±0.10 (0.014±0.004) A±0.20 (0.008) 0.80 (0.031) 0.80 (0.031) 0.50 (0.020) 0.50 (0.020) 0.35±0.10 (0.014±0.004) HOW TO ORDER TCT U□ 0G 475 M 8R Type Case Size See table above Rated DC Voltage 0E = 2.5Vdc 0G = 4Vdc 0J = 6.3Vdc 1A = 10Vdc 1C = 16Vdc 1D = 20Vdc 1E = 25Vdc 1V = 35Vdc Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = ±20% Packaging 8 = Tape width R = Positive electrode on the side opposite to sprocket hole - □□□ Discrimination code TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Temperature Range: All technical data relate to an ambient temperature of +25ºC 0.33µF to 220µF ±20% Please see the ratings and part number reference table below -55ºC to +125°C Note: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the KYOCERA AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0048 | Rev 1 – polymer, tantalum and niobium oxide capacitors – 1 TCT Series Chip Tantalum Capacitors (Large Capacitance) CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 0.33 334 0.47 474 1.0 105 2.2 225 3.3 335 4.7 475 10 106 15 156 22 226 33 336 47 476 100 107 150 157 220 227 2.5V(e) 4V (g) 6.3V (j) Rated Voltage DC ( VR ) @ 85ºC 10V (A) 16V (C) 20V(D) 25V(E) 35(V) Cap Code N U U U U P U AL S A J N S a e j n s ā ē j AS AL U P,PL AL AL AL AL U P P, PL P,PL P AL,AS,P AL AS,P,PL AL,AS AL AL AL,AS Released ratings Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher volage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE Maximum Operating Temp. (°C) 2.5 Volt Part No. Case Size Capacitance (µF) Rated Voltage (V) TCTU0E156M8R-V1 U 15 2.5 TCTU0G475M8R TCTP0G476M8R TCTP0G107M8R-EV1 TCTPL0G107M8R-V1 TCTAL0G227M8R-D TCTAS0G227M8R-V1 U P P PL AL AS 4.7 47 100 100 220 220 4 4 4 4 4 4 TCTU0J474K8R TCTU0J105K8R TCTU0J225M8R TCTU0J475M8R-02 TCTAS0J476M8R TCTP0J476M8R TCTPL0J476M8R TCTAL0J107M8R TCTAS0J107M8R TCTAL0J157M8R TCTAL0J227M8R-V1 U U U U AS P PL AL AS AL AL 0.47 1 2.2 4.7 47 47 47 100 100 150 220 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 TCTP1A226M8R TCTPL1A226M8R TCTP1A336M8R TCTAL1A476M8R TCTAS1A476M8R TCTP1A476M8R-EV1 TCTAL1A107M8R-V1 P PL P AL AS P AL 22 22 33 47 47 47 100 10 10 10 10 10 10 10 TCTP1C106M8R TCTPL1C106M8R TCTAL1C226M8R TCTAL1C336M8R P PL AL AL 10 10 22 33 16 16 16 16 TCTU1D334M8R TCTAL1D106M8R TCTAL1D226M8R-V1 U AL AL 0.33 10 22 20 20 20 TCTP1E225M8R P 2.2 25 2 4 Volt 6.3 Volt 10 Volt 16 Volt 20 Volt 25 Volt DCL Max. (µA) DF Max. (%) Impedance @100kHz (Ω) MSL 125 7.5 50 25 2 125 125 125 125 125 125 1.9 1.9 20.0 20.0 20.0 88.0 20 20 30 30 20 30 20 4 4 4 2.5 2.5 2 1 1 1 1 2 125 125 125 125 125 125 125 125 125 125 125 0.5 0.7 1.4 3.0 6.0 14.8 14.8 6.3 31.5 94.5 280.0 20 20 20 50 20 30 30 18 18 30 30 35 20 20 25 4 4 4 3 3 2.7 2.5 2 2 2 2 1 1 1 1 2 1 1 125 125 125 125 125 125 125 2.2 11.0 16.5 4.7 9.4 23.5 50.0 20 20 30 20 20 30 30 5 5 4 4 4 4 2.5 1 1 1 1 1 1 1 125 125 125 125 1.6 3.2 3.6 5.3 20 20 20 20 6 6 4 4 1 1 1 1 125 125 125 0.7 2.0 4.4 20 15 20 30 8 4 2 2 1 125 0.6 20 8 1 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0048 | Rev 1 – polymer, tantalum and niobium oxide capacitors – TCT Series Chip Tantalum Capacitors (Large Capacitance) RATINGS & PART NUMBER REFERENCE Rated Voltage (V) Part No. Case Size Capacitance (µF) TCTAL1E475M8R AL 4.7 25 TCTAS1V105M8R TCTAL1V335M8R AS AL 1.0 3.3 35 35 Maximum Operating Temp. (°C) 35 Volt DCL Max. (µA) DF Max. (%) Impedance @100kHz (Ω) MSL 125 1.2 15 8 1 125 125 0.7 1.2 15 15 8 8 1 1 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 1.5 volts. DCL is measured at rated voltage after 5 minutes. Impedance allowed to move up to 1.25 times catalog limit post mounting. NOTE: KYOCERA AVX reserves the rights to supply higher voltage rating in the same case size, to the same reliability standards. QUALIFICATION TABLE TCT series (Temperature range -55ºC to +125ºC) TEST Endurance Humidity Temperature Stability Surge Voltage Vibration Condition Characteristics Apply rated voltage (Ur) at 85°C for 1000hrs through a serial resistence of ≤3.0Ω. Stabilize at room temperature for 24 hours before measuring. Store at 60±2°C, 90-95% relative humidity for 500+ 12/0 hours. Stabilize at room temperature and humidity for 24 hours before measuring. Step 1 2 3 Temperature°C -55 +85 +125 Duration(min) 15 15 15 Visual examination no visible damage DCL 2x initial limit ΔC/C within +20/-30% of initial value (U case), ±20% (P, PL case) ±30% (AL, AS case) DF 2x initial limit (P, PL case), 3x (AL, AS, U case) Visual examination no visible damage DCL 2x initial limit (P, PL, AL, AS case), 10x (U case) ΔC/C within ±20% of initial value DF 2x initial limit (P, PL case), 3x (AL, AS, U case) -55°C +85°C +125°C DCL n/a 0/-15% (P, PL, AL case) 10xIL* 12.5xIL* ΔC/C 0/-20% (AS case) +15/0% +20/0% DF 0/-30% (U case) IL* IL* IL* Visual examination no visible damage DCL 2x initial limit ΔC/C ±20% of initial limit DF 2x initial limit 4.17 JIS C 5101-1 Visual examination no visible damage Frequency: 10 to 55 to 10Hz/min. DCL initial limit Amplitude: 1.5mm ΔC/C within ± 5% of initial value Time: 2hours each in X and Y directions DF initial limit Apply 1.3x rated voltage (Ur) at 85±2°C for 1000 cycles, 300sec charge and 30sec discharge resistance 1000Ω. *Initial Limit For use outside of recommended conditions and special request, please contact KYOCERA AVX. Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0048 | Rev 1 – polymer, tantalum and niobium oxide capacitors – 3 TCT Series Chip Tantalum Capacitors (Large Capacitance) PACKAGING SPECIFICATIONS Unit (mm) A±0.10 B±0.10 W±0.20 E±0.10 F±0.05 P1±0.10 P2±0.05 PO±0.10 DO+0.10/0 t1±0.05 t2±0.10 AL 1.90 3.50 8.00 1.75 3.50 4.00 2.00 4.00 φ1.55±0.05 0.25 1.30±0.05 3,000 pcs AS 1.90 3.50 8.00 1.75 3.50 4.00 2.00 4.00 φ1.50 0.25 1.10 3,000 pcs P 1.55 2.30 8.00 1.75 3.50 4.00 2.00 4.00 φ1.55±0.05 0.25 1.32 3,000 pcs PL 1.60 2.40 8.00 1.75 3.50 4.00 2.00 4.00 φ1.50 0.25 1.05±0.05 3,000 pcs U 0.75±0.05 1.40±0.05 8.00 1.75 3.50 2.00 2.00 4.00 φ1.50 0.20 0.65±0.05 10,000 pcs REEL DIMENSIONS 4 Standard packaging quantity Case The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-PTNO-0048 | Rev 1 – polymer, tantalum and niobium oxide capacitors –