TPC Series – Low ESR TACmicrochip®
TPC Series
Low ESR TACmicrochip®
FEATURES
•
•
•
•
•
•
Low ESR TACmicrochip® Capacitor
Smallest and Low Profile Tantalum
100% Surge Current Tested
CV Range: 1.0-100μF / 3-25V
4 Case Sizes Available
Power Supply Applications
LEAD-FREE COMPATIBLE
COMPONENT
APPLICATIONS
• Portable Controller with Elevated Power Requirements
CASE DIMENSIONS: millimeters (inches)
L
POLARITY BAND NOT TO
EXCEED CENTER LINE
H
S
Lt
Code
EIA
Code
EIA
Metric
L+0.20 (0.008)
-0.00 (0.000)
W+0.15 (0.006)
-0.00 (0.000)
H+0.15 (0.006)
-0.00 (0.000)
Termination
Spacing (S)
Minimum
Termination
Length (Lt)
H
0805
2012-10
2.00 (0.079)
1.35 (0.053)
1.00 (0.039) max
0.70 (0.028) min
0.15 (0.006)
0.40 (0.016) min
0.10 (0.004)
K
0402
1005-07
1.00 (0.039)
L
0603
1608-10
R
0805
2012-15
0.50 +0.20
-0.00
+0.20
0.50 -0.00
+0.008
(0.020 +0.008
-0.000 )
(0.020 -0.000 )
1.60 (0.063)
0.85 (0.033)
0.85 (0.033)
0.55 (0.022) min
0.15 (0.006)
2.00 (0.079)
1.35 (0.053)
1.35 (0.053)
0.70 (0.028) min
0.15 (0.006)
W
MARKING
H, K, L, R CASE
Polarity
Band
(Anode+)
HOW TO ORDER
TPC
R
106
*
010
R
1800
Type
Case Size
See table
above
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
Tolerance
K=±10%
M=±20%
Rated DC
Voltage
003=3Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
Packaging
R, P = 7" Standard Tin
Termination Plastic Tape
X, Q = 4¼" Standard Tin
Termination Plastic Tape
A, M = 7" Gold Termination
Plastic Tape
F, N = 4¼" Gold Termination
Plastic Tape
ESR in mΩ
TACmicrochip®
TECHNICAL SPECIFICATIONS
Technical Data:
Capacitance Range:
Capacitance Tolerance:
Leakage Current DCL:
Rated Voltage (VR)
Category Voltage (VC)
Surge Voltage (VS)
Surge Voltage (VS)
Temperature Range:
Reliability:
Termination Finish:
148
≤ +85°C:
≤ +125°C:
≤ +85°C:
≤ +125°C:
All technical data relate to an ambient temperature of +25°C
1.0 μF to 100 μF
±10%; ±20%
0.01CV or 0.5μA whichever is the greater
3
4
6.3
10
16
20
25
2
2.7
4
7
10
13
17
3.9
5.2
8
13
20
26
32
2.6
3.2
5
8
12
16
20
-55°C to +125°C
1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level
Tin Plating over Nickel (standard),
Gold Plating over Nickel option available upon request
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
081721
– polymer, tantalum and niobium oxide capacitors –
TPC Series
Low ESR TACmicrochip®
CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE)
Capacitance
μF
Code
1.0
105
1.5
155
2.2
225
3.3
335
4.7
475
6.8
685
10
106
3.0V
Voltage Rating DC (VR) at 85°C
6.3V
10V
4.0V
16V
20V
L(5000)
K(8000)/L(5000)
25V
R(3000)
L(5000)
L(5000)
L(5000)
K(8000)
15
156
22
226
33
336
R(1800)
47
476
R(1500)
68
686
100
107
L(5000)
L(5000)/R(1800)
L(4000)
H(2500)
L(4000),R(1800)
R(1800)
R(1500)
R(1500)
R(1500)
H(1500)/R(1500)
R(2000)
R(1800)
R(1500)
R(1800)
R(1000)
Codes shown are examples of ESR values offered on certain CV and case size. Other codes and ESR values available upon request.
Released ratings, (ESR ratings in mOhms in parentheses)
Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards.
RATINGS & PART NUMBER REFERENCE
Part Number
Case
Size
Capacitance
(μF)
Rated
Voltage
(V)
Rated
Category
Category
Temperature Voltage Temperature
(ºC)
(V)
(ºC)
TPCK475*003#8000
TPCR336*003#1800
TPCR476*003#1500
K
R
R
4.7
33
47
3
3
3
85
85
85
2
2
2
TPCL226*004#5000
TPCR226*004#1800
TPCH336*004#1500
TPCR336*004#1500
TPCR107*004#1000
L
R
H
R
R
22
22
33
33
100
4
4
4
4
4
85
85
85
85
85
2.7
2.7
2.7
2.7
2.7
TPCK225*006#8000
TPCL225*006#5000
TPCL106*006#4000
TPCR156*006#1800
TPCR226*006#1500
TPCR476*006#1800
K
L
L
R
R
R
2.2
2.2
10
15
22
47
6.3
6.3
6.3
6.3
6.3
6.3
85
85
85
85
85
85
4
4
4
4
4
4
TPCL105*010#5000
TPCL225*010#5000
TPCL335*010#5000
TPCL475*010#5000
TPCH106*010#2500
TPCL106*010#4000
TPCR106*010#1800
TPCR156*010#1500
TPCR226*010#1500
TPCR336*010#1500
L
L
L
L
H
L
R
R
R
R
1.0
2.2
3.3
4.7
10
10
10
15
22
33
10
10
10
10
10
10
10
10
10
10
85
85
85
85
85
85
85
85
85
85
7
7
7
7
7
7
7
7
7
7
TPCL225*016#5000
TPCR106*016#1800
L
R
2.2
10
16
16
85
85
10
10
TPCR475*020#2000
R
4.7
20
85
13
TPCR105*025#3000
R
1.0
25
85
17
3 Volt @ 85°C
125
125
125
4 Volt @ 85°C
125
125
125
125
125
6.3 Volt @ 85°C
125
125
125
125
125
125
10 Volt @ 85°C
125
125
125
125
125
125
125
125
125
125
16 Volt @ 85°C
125
125
20 Volt @ 85°C
125
25 Volt @ 85°C
125
DCL
Max.
(μA)
DF
Max.
(%)
ESR
Max.
@ 100kHz
(mΩ)
0.5
1.0
1.5
12
10
10
0.9
0.9
1.3
1.3
4.0
100kHz RMS Current (A)
Product
Category
MSL
0.017
0.063
0.069
3
2
3
1
1
1
0.064
0.142
0.147
0.156
0.191
0.028
0.063
0.065
0.069
0.085
3
1
3
2
3
1
1
1
1
1
0.043
0.071
0.079
0.158
0.173
0.158
0.039
0.064
0.071
0.142
0.156
0.142
0.017
0.028
0.032
0.063
0.069
0.063
3
1
3
1
1
3
1
1
1
1
1
1
5000
5000
5000
5000
2500
4000
1800
1500
1500
1500
0.071
0.071
0.071
0.071
0.126
0.079
0.158
0.173
0.173
0.173
0.064
0.064
0.064
0.064
0.113
0.071
0.142
0.156
0.156
0.156
0.028
0.028
0.028
0.028
0.050
0.032
0.063
0.069
0.069
0.069
1
1
2
2
2
3
1
1
2
3
1
1
1
1
1
1
1
1
1
1
10
10
5000
1800
0.071
0.158
0.064
0.142
0.028
0.063
1
2
1
1
0.9
8
2000
0.150
0.135
0.060
1
1
0.5
8
3000
0.122
0.110
0.049
1
1
25ºC
85ºC
125ºC
8000
1800
1500
0.043
0.158
0.173
0.039
0.142
0.156
6
8
14
10
30
5000
1800
1500
1500
1000
0.071
0.158
0.163
0.173
0.212
0.5
0.5
0.6
0.9
1.4
3.0
8
6
10
8
10
20
8000
5000
4000
1800
1500
1800
0.5
0.5
0.5
0.5
1.0
1.0
1.0
1.5
2.2
3.3
6
6
8
10
8
20
8
10
14
20
0.5
1.6
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
For typical weight and composition see page 259.
NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012022
– polymer, tantalum and niobium oxide capacitors –
149
TPC Series
Low ESR TACmicrochip®
QUALIFICATION TABLE – CATEGORY 1
TPC series (Temperature range -55ºC to +125ºC)
TEST
Endurance
Humidity
Temperature
Stability
Surge
Voltage
Condition
Characteristics
Apply rated voltage (Ur) at 85ºC and / or category
voltage (Uc) at 125ºC for 2000 hours through a circuit
impedance of ≤0.1Ω/V. Stabilize at room temperature
for 1-2 hours before measuring.
Store at 40ºC and 90-95% relative humidity for 1344
hours, with no applied voltage. Stabilize at room
temperature and humidity for 1-2 hours before
measuring.
Step
Temperature°C
Duration(min)
1
+20
15
2
-55
3
+20
4
+85
15
5
+125
15
6
+20
15
Visual examination
no visible damage
DCL
1.25 x initial limit
ΔC/C
within ±10% of initial value
DF
1.5 x initial limit
ESR
1.5 x initial limit
Visual examination
no visible damage
DCL
initial limit
ΔC/C
within ±5% of initial value
DF
1.2 x initial limit
ESR
1.2 x initial limit
+20ºC
-55ºC
+20ºC
+85ºC
+125ºC
15
DCL
IL*
n/a
IL*
10 x IL*
12.5 x IL*
15
ΔC/C
n/a
+0/-10%
±5%
Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles
of duration 6 min (30 sec charge, 5 min 30 sec
discharge) through a charge / discharge resistance of
1000Ω
+10/-0% +15/-0%
+20ºC
IL*
±5%
DF
IL*
1.5 x IL*
IL*
1.5 x IL*
2 x IL*
IL*
ESR
IL*
1.25 x IL*
IL*
1.25 x IL*
2 x IL*
IL*
+20ºC
Visual examination
no visible damage
DCL
initial limit
ΔC/C
within ±10% of initial value
DF
initial limit
ESR
initial limit
*Initial Limit
QUALIFICATION TABLE – CATEGORY 2
TEST
Endurance
Humidity
Temperature
Stability
Surge
Voltage
Condition
TPC series (Temperature range -55ºC to +125ºC)
Characteristics
Apply rated voltage (Ur) at 85ºC and / or category
voltage (Uc) at 125ºC for 2000 hours through a circuit
impedance of ≤0.1Ω/V. Stabilize at room temperature
for 1-2 hours before measuring.
Store at 40ºC and 90-95% relative humidity for 1344
hours, with no applied voltage. Stabilize at room
temperature and humidity for 1-2 hours before
measuring.
Step
Temperature°C
Duration(min)
1
+20
15
2
-55
3
+20
4
5
6
+20
15
Visual examination
no visible damage
DCL
1.25 x initial limit
ΔC/C
within ±15% of initial value
DF
1.5 x initial limit
ESR
1.5 x initial limit
Visual examination
no visible damage
DCL
initial limit
ΔC/C
within ±10% of initial value
DF
1.2 x initial limit
ESR
1.2 x initial limit
+20ºC
-55ºC
+20ºC
+85ºC
+125ºC
15
DCL
IL*
n/a
IL*
10 x IL*
12.5 x IL*
15
ΔC/C
n/a
+0/-15%
±5%
+85
15
+125
15
DF
IL*
1.5 x IL*
IL*
1.5 x IL*
2 x IL*
IL*
ESR
IL*
1.25 x IL*
IL*
1.25 x IL*
2 x IL*
IL*
Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles of
duration 6 min (30 sec charge, 5 min 30 sec discharge)
through a charge / discharge resistance of 1000Ω
Visual examination
no visible damage
DCL
1.5 x initial limit
ΔC/C
within ±15% of initial value
DF
1.5 x initial limit
ESR
1.5 x initial limit
+15/-0% +20/-0%
*Initial Limit
150
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
040220
– polymer, tantalum and niobium oxide capacitors –
IL*
±5%
TPC Series
Low ESR TACmicrochip®
QUALIFICATION TABLE – CATEGORY 3
TPC series (Temperature range -55ºC to +125ºC)
TEST
Endurance
Humidity
Temperature
Stability
Surge Voltage
Condition
Characteristics
Apply rated voltage (Ur) at 85ºC and / or category
voltage (Uc) at 125ºC for 2000 hours through a circuit
impedance of ≤0.1Ω/V. Stabilize at room temperature
for 1-2 hours before measuring.
Store at 40ºC and 90-95% relative humidity for 1344
hours, with no applied voltage. Stabilize at room
temperature and humidity for 1-2 hours before
measuring.
Step
Temperature°C
Duration(min)
1
+20
15
2
-55
3
+20
4
+85
15
5
+125
15
6
+20
15
Visual examination
no visible damage
DCL
1.25 x initial limit
ΔC/C
within ±30% of initial value
DF
1.5 x initial limit
ESR
1.5 x initial limit
Visual examination
no visible damage
DCL
2 x initial limit
ΔC/C
within ±30% of initial value
DF
1.5 x initial limit
ESR
1.25 x initial limit
+20ºC
-55ºC
+20ºC
+85ºC
+125ºC
15
DCL
IL*
n/a
IL*
10 x IL*
12.5 x IL*
IL*
15
ΔC/C
n/a
+0/-25%
±5%
+20/-0%
+25/-0%
±20%
Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles of
duration 6 min (30 sec charge, 5 min 30 sec discharge)
through a charge / discharge resistance of 1000Ω
+20ºC
DF
IL*
1.5 x IL*
IL*
1.5 x IL*
2 x IL*
1.5 x IL*
ESR
IL*
1.25 x IL*
IL*
1.25 x IL*
2 x IL*
1.5 x IL*
Visual examination
no visible damage
DCL
2 x initial limit
ΔC/C
within ±30% of initial value
DF
2 x initial limit
ESR
2 x initial limit
*Initial Limit
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
012022
– polymer, tantalum and niobium oxide capacitors –
151
TPC Series
Low ESR TACmicrochip®
SOLID ELECTROLYTIC CAPACITOR ROADMAP
SERIES LINE UP : CONVENTIONAL SMD MnO2
TMJ
High Rel.
& Special
High Temp
THH
ultra
low DCL
THJ
200°C
THJ
F97-HT3
175°C auto
135°C auto
TRM
TRJ
Industrial &
Automotive
230°C COTS+
Hermetic
professional
multianode
professional
TAJ
F91-AJ6
auto
TPS
auto *T/*U
F93-AJ6
auto *T/*U
TPS
F97
professional
auto
F98-AJ6
auto
TPM
multianode
Standard
TAJ
Standard
Low Profile
High CV
152
TAJ
TLN
undertab
F91
TAC
Low Profile
microchip
TLJ
microchip
TPC
microchip
F93
Low ESR
F98-AS1
TLC
undertab,
fused
F92
F98
undertab
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
030321
– polymer, tantalum and niobium oxide capacitors –
很抱歉,暂时无法提供与“TPCL475J010R5000”相匹配的价格&库存,您可以联系我们找货
免费人工找货