TPCR226M006R1500

TPC Series – Low ESR TACmicrochip® TPC Series Low ESR TACmicrochip® FEATURES • • • • • • Low ESR TACmicrochip® Capacitor Smallest and Low Profile Tantalum 100% Surge Current Tested CV Range: 1.0-100μF / 3-25V 4 Case Sizes Available Power Supply Applications LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Portable Controller with Elevated Power Requirements CASE DIMENSIONS: millimeters (inches) L POLARITY BAND NOT TO EXCEED CENTER LINE H S Lt Code EIA Code EIA Metric L+0.20 (0.008) -0.00 (0.000) W+0.15 (0.006) -0.00 (0.000) H+0.15 (0.006) -0.00 (0.000) Termination Spacing (S) Minimum Termination Length (Lt) H 0805 2012-10 2.00 (0.079) 1.35 (0.053) 1.00 (0.039) max 0.70 (0.028) min 0.15 (0.006) 0.40 (0.016) min 0.10 (0.004) K 0402 1005-07 1.00 (0.039) L 0603 1608-10 R 0805 2012-15 0.50 +0.20 -0.00 +0.20 0.50 -0.00 +0.008 (0.020 +0.008 -0.000 ) (0.020 -0.000 ) 1.60 (0.063) 0.85 (0.033) 0.85 (0.033) 0.55 (0.022) min 0.15 (0.006) 2.00 (0.079) 1.35 (0.053) 1.35 (0.053) 0.70 (0.028) min 0.15 (0.006) W MARKING H, K, L, R CASE Polarity Band (Anode+) HOW TO ORDER TPC R 106 * 010 R 1800 Type Case Size See table above Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance K=±10% M=±20% Rated DC Voltage 003=3Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc 020=20Vdc 025=25Vdc Packaging R, P = 7" Standard Tin Termination Plastic Tape X, Q = 4¼" Standard Tin Termination Plastic Tape A, M = 7" Gold Termination Plastic Tape F, N = 4¼" Gold Termination Plastic Tape ESR in mΩ TACmicrochip® TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: Termination Finish: 148 ≤ +85°C: ≤ +125°C: ≤ +85°C: ≤ +125°C: All technical data relate to an ambient temperature of +25°C 1.0 μF to 100 μF ±10%; ±20% 0.01CV or 0.5μA whichever is the greater 3 4 6.3 10 16 20 25 2 2.7 4 7 10 13 17 3.9 5.2 8 13 20 26 32 2.6 3.2 5 8 12 16 20 -55°C to +125°C 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level Tin Plating over Nickel (standard), Gold Plating over Nickel option available upon request The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 081721 – polymer, tantalum and niobium oxide capacitors – TPC Series Low ESR TACmicrochip® CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 1.0 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 3.0V Voltage Rating DC (VR) at 85°C 6.3V 10V 4.0V 16V 20V L(5000) K(8000)/L(5000) 25V R(3000) L(5000) L(5000) L(5000) K(8000) 15 156 22 226 33 336 R(1800) 47 476 R(1500) 68 686 100 107 L(5000) L(5000)/R(1800) L(4000) H(2500) L(4000),R(1800) R(1800) R(1500) R(1500) R(1500) H(1500)/R(1500) R(2000) R(1800) R(1500) R(1800) R(1000) Codes shown are examples of ESR values offered on certain CV and case size. Other codes and ESR values available upon request. Released ratings, (ESR ratings in mOhms in parentheses) Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE Part Number Case Size Capacitance (μF) Rated Voltage (V) Rated Category Category Temperature Voltage Temperature (ºC) (V) (ºC) TPCK475*003#8000 TPCR336*003#1800 TPCR476*003#1500 K R R 4.7 33 47 3 3 3 85 85 85 2 2 2 TPCL226*004#5000 TPCR226*004#1800 TPCH336*004#1500 TPCR336*004#1500 TPCR107*004#1000 L R H R R 22 22 33 33 100 4 4 4 4 4 85 85 85 85 85 2.7 2.7 2.7 2.7 2.7 TPCK225*006#8000 TPCL225*006#5000 TPCL106*006#4000 TPCR156*006#1800 TPCR226*006#1500 TPCR476*006#1800 K L L R R R 2.2 2.2 10 15 22 47 6.3 6.3 6.3 6.3 6.3 6.3 85 85 85 85 85 85 4 4 4 4 4 4 TPCL105*010#5000 TPCL225*010#5000 TPCL335*010#5000 TPCL475*010#5000 TPCH106*010#2500 TPCL106*010#4000 TPCR106*010#1800 TPCR156*010#1500 TPCR226*010#1500 TPCR336*010#1500 L L L L H L R R R R 1.0 2.2 3.3 4.7 10 10 10 15 22 33 10 10 10 10 10 10 10 10 10 10 85 85 85 85 85 85 85 85 85 85 7 7 7 7 7 7 7 7 7 7 TPCL225*016#5000 TPCR106*016#1800 L R 2.2 10 16 16 85 85 10 10 TPCR475*020#2000 R 4.7 20 85 13 TPCR105*025#3000 R 1.0 25 85 17 3 Volt @ 85°C 125 125 125 4 Volt @ 85°C 125 125 125 125 125 6.3 Volt @ 85°C 125 125 125 125 125 125 10 Volt @ 85°C 125 125 125 125 125 125 125 125 125 125 16 Volt @ 85°C 125 125 20 Volt @ 85°C 125 25 Volt @ 85°C 125 DCL Max. (μA) DF Max. (%) ESR Max. @ 100kHz (mΩ) 0.5 1.0 1.5 12 10 10 0.9 0.9 1.3 1.3 4.0 100kHz RMS Current (A) Product Category MSL 0.017 0.063 0.069 3 2 3 1 1 1 0.064 0.142 0.147 0.156 0.191 0.028 0.063 0.065 0.069 0.085 3 1 3 2 3 1 1 1 1 1 0.043 0.071 0.079 0.158 0.173 0.158 0.039 0.064 0.071 0.142 0.156 0.142 0.017 0.028 0.032 0.063 0.069 0.063 3 1 3 1 1 3 1 1 1 1 1 1 5000 5000 5000 5000 2500 4000 1800 1500 1500 1500 0.071 0.071 0.071 0.071 0.126 0.079 0.158 0.173 0.173 0.173 0.064 0.064 0.064 0.064 0.113 0.071 0.142 0.156 0.156 0.156 0.028 0.028 0.028 0.028 0.050 0.032 0.063 0.069 0.069 0.069 1 1 2 2 2 3 1 1 2 3 1 1 1 1 1 1 1 1 1 1 10 10 5000 1800 0.071 0.158 0.064 0.142 0.028 0.063 1 2 1 1 0.9 8 2000 0.150 0.135 0.060 1 1 0.5 8 3000 0.122 0.110 0.049 1 1 25ºC 85ºC 125ºC 8000 1800 1500 0.043 0.158 0.173 0.039 0.142 0.156 6 8 14 10 30 5000 1800 1500 1500 1000 0.071 0.158 0.163 0.173 0.212 0.5 0.5 0.6 0.9 1.4 3.0 8 6 10 8 10 20 8000 5000 4000 1800 1500 1800 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.5 2.2 3.3 6 6 8 10 8 20 8 10 14 20 0.5 1.6 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. For typical weight and composition see page 259. NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012022 – polymer, tantalum and niobium oxide capacitors – 149 TPC Series Low ESR TACmicrochip® QUALIFICATION TABLE – CATEGORY 1 TPC series (Temperature range -55ºC to +125ºC) TEST Endurance Humidity Temperature Stability Surge Voltage Condition Characteristics Apply rated voltage (Ur) at 85ºC and / or category voltage (Uc) at 125ºC for 2000 hours through a circuit impedance of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 40ºC and 90-95% relative humidity for 1344 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step Temperature°C Duration(min) 1 +20 15 2 -55 3 +20 4 +85 15 5 +125 15 6 +20 15 Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±10% of initial value DF 1.5 x initial limit ESR 1.5 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF 1.2 x initial limit ESR 1.2 x initial limit +20ºC -55ºC +20ºC +85ºC +125ºC 15 DCL IL* n/a IL* 10 x IL* 12.5 x IL* 15 ΔC/C n/a +0/-10% ±5% Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω +10/-0% +15/-0% +20ºC IL* ±5% DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* ESR IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* IL* +20ºC Visual examination no visible damage DCL initial limit ΔC/C within ±10% of initial value DF initial limit ESR initial limit *Initial Limit QUALIFICATION TABLE – CATEGORY 2 TEST Endurance Humidity Temperature Stability Surge Voltage Condition TPC series (Temperature range -55ºC to +125ºC) Characteristics Apply rated voltage (Ur) at 85ºC and / or category voltage (Uc) at 125ºC for 2000 hours through a circuit impedance of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 40ºC and 90-95% relative humidity for 1344 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step Temperature°C Duration(min) 1 +20 15 2 -55 3 +20 4 5 6 +20 15 Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±15% of initial value DF 1.5 x initial limit ESR 1.5 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±10% of initial value DF 1.2 x initial limit ESR 1.2 x initial limit +20ºC -55ºC +20ºC +85ºC +125ºC 15 DCL IL* n/a IL* 10 x IL* 12.5 x IL* 15 ΔC/C n/a +0/-15% ±5% +85 15 +125 15 DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* ESR IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* IL* Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω Visual examination no visible damage DCL 1.5 x initial limit ΔC/C within ±15% of initial value DF 1.5 x initial limit ESR 1.5 x initial limit +15/-0% +20/-0% *Initial Limit 150 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 040220 – polymer, tantalum and niobium oxide capacitors – IL* ±5% TPC Series Low ESR TACmicrochip® QUALIFICATION TABLE – CATEGORY 3 TPC series (Temperature range -55ºC to +125ºC) TEST Endurance Humidity Temperature Stability Surge Voltage Condition Characteristics Apply rated voltage (Ur) at 85ºC and / or category voltage (Uc) at 125ºC for 2000 hours through a circuit impedance of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 40ºC and 90-95% relative humidity for 1344 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step Temperature°C Duration(min) 1 +20 15 2 -55 3 +20 4 +85 15 5 +125 15 6 +20 15 Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±30% of initial value DF 1.5 x initial limit ESR 1.5 x initial limit Visual examination no visible damage DCL 2 x initial limit ΔC/C within ±30% of initial value DF 1.5 x initial limit ESR 1.25 x initial limit +20ºC -55ºC +20ºC +85ºC +125ºC 15 DCL IL* n/a IL* 10 x IL* 12.5 x IL* IL* 15 ΔC/C n/a +0/-25% ±5% +20/-0% +25/-0% ±20% Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω +20ºC DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* 1.5 x IL* ESR IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* 1.5 x IL* Visual examination no visible damage DCL 2 x initial limit ΔC/C within ±30% of initial value DF 2 x initial limit ESR 2 x initial limit *Initial Limit The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 012022 – polymer, tantalum and niobium oxide capacitors – 151 TPC Series Low ESR TACmicrochip® SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP : CONVENTIONAL SMD MnO2 TMJ High Rel. & Special High Temp THH ultra low DCL THJ 200°C THJ F97-HT3 175°C auto 135°C auto TRM TRJ Industrial & Automotive 230°C COTS+ Hermetic professional multianode professional TAJ F91-AJ6 auto TPS auto *T/*U F93-AJ6 auto *T/*U TPS F97 professional auto F98-AJ6 auto TPM multianode Standard TAJ Standard Low Profile High CV 152 TAJ TLN undertab F91 TAC Low Profile microchip TLJ microchip TPC microchip F93 Low ESR F98-AS1 TLC undertab, fused F92 F98 undertab The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 030321 – polymer, tantalum and niobium oxide capacitors –