W3A41A390KAT2A

Capacitor Array Capacitor Array (IPC) BENEFITS OF USING CAPACITOR ARRAYS KYOCERA AVX capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board and to reduce real estate requirements. Reduced Costs Placement costs are greatly reduced by effectively placing one device instead of four or two. This results in increased throughput and translates into savings on machine time. Inventory levels are lowered and further savings are made on solder materials, etc. Space Saving Space savings can be quite dramatic when compared to the use of discrete chip capacitors. As an example, the 0508 4-element array offers a space reduction of >40% vs. 4 x 0402 discrete capacitors and of >70% vs. 4 x 0603 discrete capacitors. (This calculation is dependent on the spacing of the discrete components.) Increased Throughput Assuming that there are 220 passive components placed in a mobile phone: For high volume users of cap arrays using the very latest placement equipment capable of placing 10 components per second, the increase in throughput can be very significant and can have the overall effect of reducing the number of placement machines required to mount components: If 120 million 2-element arrays or 40 million 4-element arrays were placed in a year, the requirement for placement equipment would be reduced by one machine. During a 20Hr operational day a machine places 720K components. Over a working year of 167 days the machine can place approximately 120 million. If 2-element arrays are mounted instead of discrete components, then the number of placements is reduced by a factor of two and in the scenario where 120 million 2-element arrays are placed there is a saving of one pick and place machine. Smaller volume users can also benefit from replacing discrete components with arrays. The total number of placements is reduced thus creating spare capacity on placement machines. This in turn generates the opportunity to increase overall production output without further investment in new equipment. A reduction in the passive count to 200 (by replacing discrete components with arrays) results in an increase in throughput of approximately 9%. A reduction of 40 placements increases throughput by 18%. W2A (0508) Capacitor Arrays 4 pcs 0402 Capacitors = 1 pc 0508 Array 1.88 (0.074) 1.4 1.0 (0.055) (0.039) 5.0 (0.197) AREA = 7.0mm2 (0.276 in2) 2.1 (0.083) AREA = 3.95mm2 (0.156 in2) The 0508 4-element capacitor array gives a PCB space saving of over 40% vs four 0402 discretes and over 70% vs four 0603 discrete capacitors. W3A (0612) Capacitor Arrays 4 pcs 0603 Capacitors = 1 pc 0612 Array 1.60 (0.063) 2.3 1.5 (0.091) (0.059) 6.0 (0.236) AREA = 13.8mm2 (0.543 in2) 3.2 (0.126) AREA = 6.4mm2 (0.252 in2) The 0612 4-element capacitor array gives a PCB space saving of over 50% vs four 0603 discretes and over 70% vs four 0805 discrete capacitors. 72 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-SMDMLCC-0011 | Rev 2 – surface mount ceramic capacitor products – Capacitor Array Capacitor Array (IPC) GENERAL DESCRIPTION KYOCERA AVX is the market leader in the development and manufacture of capacitor arrays. The array family of products also includes the 0612 4-element device as well as 0508 2-element and 4-element series, all of which have received widespread acceptance in the marketplace. KYOCERA AVX capacitor arrays are available in X5R, X7R and NP0 (C0G) ceramic dielectrics to cover a broad range of capacitance values. Voltage ratings from 6.3 Volts up to 100 Volts are offered. KYOCERA AVX also now offers a range of automotive capacitor arrays qualified to AEC-Q200 (see separate table). 0508 - 2 Element Key markets for capacitor arrays are Mobile and Cordless Phones, Digital Set Top Boxes, Computer Motherboards and Peripherals as well as Automotive applications, RF Modems, Networking Products, etc. 0612 - 4 Element 0508 - 4 Element AVX Capacitor Array - W2A41A***K S21 Magnitude 0 -5 S21 mag. (dB) -10 -15 -20 -25 -30 5pF 10pF 15pF 22pF 33pF 39pF 68pF -35 -40 0.01 0.1 1 10 Frequency (GHz) HOW TO ORDER W 2 Style Case W = RoHS Size L = SnPb 2 = 0508 3 = 0612 A Array 4 3 C Voltage Dielectric Number 6 = 6V A = NP0 of Caps C = X7R 2 = 2 Element Z = 10V D = X5R 4 = 4 Element Y = 16V 3 = 25V 5 = 50V 1 = 100V 103 M A T 2A Capacitance Capacitance Termination Packaging & Failure Tolerance Code Code Quantity Rate A = Commercial *T = Plated Ni 2 Sig. Digits + J = ±5% Code 4 = Automotive Number of and Sn 2A = 7" Reel K = ±10% Zeros ® *Z = FLEXITERM 4A = 13" Reel M = ±20% *B = 5% min lead 2F = 7" Reel *X = FLEXITERM® (1000) with 5% min lead NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-SMDMLCC-0011 | Rev 2 – surface mount ceramic capacitor products – 73 Capacitor Array Capacitance Range – NP0/C0G SIZE # Elements W2 = 0508 4 W3 = 0612 4 Solderinq Reflow/Wave Reflow/Wave Packaqinq Paper/Embossed 1.30 ± 0.15 (0.051 ± 0.006) 2.10 ± 0.15 (0.083 ± 0.006) 0.94 (0.037) 16 25 50 Paper/Embossed 1.60 ± 0.150 (0.063 ± 0.006) 3.20 ± 0.20 (0.126 ± 0.008) 1.35 (0.053) 16 25 50 Length Width Max. Thickness WVDC 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 Cap (pF) mm (in.) mm (in.) mm (in.) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 = Supported Values 74 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-SMDMLCC-0011 | Rev 2 – surface mount ceramic capacitor products – Capacitor Array Capacitance Range – X7R SIZE # Elements Solderinq Packaqinq Length Width Max. Thickness WVDC 101 Cap (pF) 121 151 181 221 271 331 391 471 561 681 751 821 102 122 152 182 222 272 332 392 472 562 682 822 103 Cap (µF) 153 183 223 273 333 393 473 563 683 823 104 154 224 274 334 394 474 564 684 824 105 W2 = 0508 2 mm (in.) mm (in.) mm (in.) 100 120 150 180 220 270 330 390 470 560 680 750 820 1000 1200 1500 1800 2000 2700 3300 3900 4700 5600 6800 8200 0.010 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.100 0.150 0.220 0.270 0.330 0.390 0.470 0.560 0.680 0.820 1.000 6 Reflow/Wave All Paper 1.30 ± 0.15 (0.051 ± 0.006) 2.10 ± 0.15 (0.083 ± 0.006) 0.94 (0.037) 10 16 25 50 W2 = 0508 4 100 6 Reflow/Wave Paper/Embossed 1.30 ± 0.15 (0.051 ± 0.006) 2.10 ± 0.15 (0.083 ± 0.006) 0.94 (0.037) 10 16 25 50 W3 = 0612 4 100 6 Reflow/Wave Paper/Embossed 1.60 ± 0.150 (0.063 ± 0.006) 3.20 ± 0.20 (0.126 ± 0.008) 1.35 (0.053) 10 16 25 50 100 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-SMDMLCC-0011 | Rev 2 – surface mount ceramic capacitor products – 75 Capacitor Array Automotive Capacitor Array (IPC) As the market leader in the development and manufacture of capacitor arrays KYOCERA AVX is pleased to offer a range of AEC-Q200 qualified arrays to compliment our product offering to the Automotive industry. Both the KYOCERA AVX 0612 and 0508 4-element capacitor array styles are qualified to the AEC-Q200 automotive specifications. AEC-Q200 is the Automotive Industry qualification standard and a detailed qualification package is available on request. All KYOCERA AVX automotive capacitor array production facilities are certified to ISO/TS 16949:2002. HOW TO ORDER W 3 A Style Case W = RoHS Size L = SnPb 2 = 0508 3 = 0612 4 Y C 104 Array Number Voltage Dielectric A = NP0 of Caps Z = 10V Y = 16V C = X7R 3 = 25V F = X8R 5 = 50V 1 = 100V K Capacitance Capacitance Tolerance Code (In pF) *J = ±5% Significant *K = ±10% Digits + *M = ±20% Number of Zeros e.g. 10μF=106 4 T 2A Failure Rate Terminations *T = Plated Ni and Sn *Z = FLEXITERM® B = 5% min lead X = FLEXITERM® with 5% min lead Packaging & Quantity Code 2A = 7" Reel 4A = 13" Reel 2F = 7" Reel (1000) 4 = Automotive *Contact factory for availability by part number for K = ±10% and J = ±5% tolerance. NP0/C0G X7R SIZE W3 = 0612 SIZE W2 = 0508 W2 = 0508 No. of Elements WVDC 1R0 Cap 1.0 1R2 (pF) 1.2 1R5 1.5 1R8 1.8 2R2 2.2 2R7 2.7 3R3 3.3 3R9 3.9 4R7 4.7 5R6 5.6 6R8 6.8 8R2 8.2 100 10 120 12 150 15 180 18 220 22 270 27 330 33 390 39 470 47 560 56 680 68 820 82 101 100 121 120 151 150 181 180 221 220 271 270 331 330 391 390 471 470 561 560 681 680 821 820 102 1000 122 1200 152 1500 182 1800 222 2200 272 2700 332 3300 392 3900 472 4700 562 5600 682 6800 822 8200 Reflow/Wave 16 25 50 No. of Elements WVDC 101 Cap 100 121 (pF) 120 151 150 181 180 221 220 271 270 331 330 391 390 471 470 561 560 681 680 821 820 102 1000 122 1200 152 1500 182 1800 222 2200 272 2700 332 3300 392 3900 472 4700 562 5600 682 6800 822 8200 103 Cap 0 010 123 (μF) 0.012 153 0.015 153 0.018 223 0.022 273 0.027 333 0.033 393 0.039 473 0.047 563 0.056 683 0.068 823 0.082 104 0.10 124 0.12 154 0.15 224 0.22 2 4 16 25 50 100 16 25 50 W3 = 0612 100 10 16 4 25 50 100 = X7R = NPO/COG LEAD-FREE COMPATIBLE COMPONENT 76 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-SMDMLCC-0011 | Rev 2 – surface mount ceramic capacitor products – Capacitor Array Part & Pad Layout Dimensions PART & PAD LAYOUT DIMENSIONS millimeters (inches) 0508 - 2 Element 0508 - 4 Element 0612 - 4 Element W S S P X X P X X W S S T T BW C L BW C/L OF CHIP BL PAD LAYOUT C/L OF CHIP C L L BL PAD LAYOUT PAD LAYOUT PART DIMENSIONS PAD LAYOUT DIMENSIONS 0508 - 2 Element 0508 - 2 Element L W 1.30 ± 0.15 2.10 ± 0.15 (0.051 ± 0.006) (0.083 ± 0.006) T 0.94 MAX (0.037 MAX) BW BL BW BL 0.43 ± 0.10 0.33 ± 0.08 (0.017 ± 0.004) (0.013 ± 0.003) P S 1.00 REF (0.039 REF) 0.50 ± 0.10 (0.020 ± 0.004) P X A 0.68 (0.027) 0508 - 4 Element L W 1.30 ± 0.15 2.10 ± 0.15 (0.051 ± 0.006) (0.083 ± 0.006) B 1.32 (0.052) C 2.00 (0.079) D 0.46 (0.018) E 1.00 (0.039) 0508 - 4 Element T 0.94 MAX (0.037 MAX) 0.25 ± 0.06 0.20 ± 0.08 (0.010 ± 0.003) (0.008 ± 0.003) 0.50 REF (0.020 REF) S 0.75 ± 0.10 0.25 ± 0.10 (0.030 ± 0.004) (0.010 ± 0.004) 0612 - 4 Element A 0.56 (0.022) B 1.32 (0.052) C 1.88 (0.074) D 0.30 (0.012) E 0.50 (0.020) 0612 - 4 Element L W T 1.60 ± 0.20 3.20 ± 0.20 1.35 MAX (0.063 ± 0.008) (0.126 ± 0.008) L (0.053 MAX) BW BL P +0.25 0.18 -0.08 0.76 REF +0.010 ) (0.007 (0.016 ± 0.004) (0.030 REF) -0.003 0.41 ± 0.10 X S 1.14 ± 0.10 0.38 ± 0.10 A 0.89 (0.035) B 1.65 (0.065) C 2.54 (0.100) D 0.46 (0.018) E 0.76 (0.030) (0.045 ± 0.004) (0.015 ± 0.004) The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. TDS-SMDMLCC-0011 | Rev 2 – surface mount ceramic capacitor products – 77