AXE10

Issue: 03 Specification AXE10 Oscillator type : SMD PXO (Clock) in CO 26 package Date: 2005-06-08 Parameter Frequency range Standard frequencies Frequency stability Initial tolerance vs. temperature in operating temperature range (steady state) vs. supply voltage variation vs. load change long term (aging) 1st year Frequency adjustment range Electronic Frequency Control (EFC) range RF output Signal waveform Output signal HIGH VOH min. typ. max. Unit 1.544 -25 ±5 125 25 MHz MHz ppm ppm ppm ppm ppm ppm ppm HCMOS/TTL 2.4 VS0.5V 0.4 0.5 10 40 60 10 3.13 3.3 3.47 4.75 5.0 5.25 15 85 10 45 -10 +70 -40 +85 -40 +85 14.4x9.5x6 max 3 Tape & reel 1500 Condition Overall (Note 1) -10°~+70°C VS ±5% Load ±5% @ +40°C N.A. ±3 ±1 ±1 V V V V ns % ms V mA mA °C °C °C mm gram TTL load (fan-out 2) HCMOS load 15 pF TTL load (fan-out 2) HCMOS load 15 pF according to logic family @ VS/2 Option “33” Option “50” Option “33” Option “50” Output signal LOW Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS VOL Current consumption (steady state) Operating temperature range Operable temperature range Storage temperature range IEC 61837 CO 26 Enclosure (see drawing) (LxWxH) Weight IEC 60286-3 Packing V HBM as in IEC 61000-4-2 ESD Sensitivity Notes: 1. Frequency stability = initial tolerance + stability vs. temperature 2. Absolute Pull Range (APR) = EFC range - temperature stability - supply & load change – aging 3. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Ordering Code: Model (Specification) AXE10 Option 50 Frequency [MHz] 24.576 GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXE10 page 1(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com Enclosure drawing Pin connections Pin # Symbol 1 N.C. 2* N.C. 3 GND 4 RF OUT 5* N.C. 6 Vs Function No Connection No Connection Ground RF Output Optional Supply Voltage * Note: Pins 2 and 5 may not be present Environmental conditions Test Visual inspection, dimensions Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* Bump* Free fall* IEC 60068 Part ... IEC 60679-1 clause ... 4.3 4.6.2 4.6.3 Test conditions Enclosure styles as in IEC 60679-3 or 61837, if applicable Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Eb, 4000 bumps per Axes, 40g, 6 ms Test Ed procedure 1, 2 drops from 1m height Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Na, 10 cycles at extremes of operating temperature range Test Ba, 16 h at upper temperature indicated by climatic category Test Db variant 1 severity b), 55°C/95% r.H., 6 cycles Test Aa, 2 h at lower temperature indicated by climatic category Sequence of 4.6.14, 4.6.15 (1st cycle), 4.6.16, 4.6.15 (5 cycles) Test Ca, 56 days 2-17 2-20 2-58 2-27 2-29 2-32 4.6.8 4.6.6 4.6.9 4.6.7 Vibration, sinusoidal* 2-6 Rapid change of temperature Dry heat Damp heat, cyclic* Cold Climatic sequence* Damp heat, steady state* Endurance tests - ageing - extended aging 2-14 2-2 2-30 2-1 1-7 2-3 4.6.5 4.6.14 4.6.15 4.6.16 4.6.17 4.6.18 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXE10 page 2(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com