AXHV1001

Issue: 01 Specification AXHV1001 Oscillator type : VCO – Voltage Controlled Oscillator Date: 2005-12-08 Parameter min. typ. max. Unit Condition 1200 2100 MHz @ 25°C Frequency tuning range Frequency adjustment range EFC voltage VC 0.2 18 V positive EFC slope (∆f / ∆VC) RF output Signal waveform SINUS Amplitude +3 +6 dBm RL = 50 Ω -90 dBc/Hz @ 100 kHz Phase Noise Supply voltage VS 4.75 5 5.25 V Current consumption (steady state) 10 mA -10 +60 °C Operating temperature range -20 +70 °C Operable temperature range -40 +85 °C Storage temperature range 12.7 x 12.7 x 6.1 mm Enclosure (see drawing) LxWxH 5 gram Weight bulk IEC 60286-3 Packing 1500 V HBM, IEC 61000-4-2 ESD Sensitivity Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Ordering Code: Model (Specification) AXHV1001 Frequency Range [MHz] 1200-2100 GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXHV1001 page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com Enclosure drawing Pin connections Pin # Symbol P1 VC P2 RF OUT P3 VS P4 N.C. All GND others Function Control Voltage (EFC) RF Output Supply Voltage Not Connected Ground Typical Performance VCO 1.2 GHz bis 2.06 GHZ VCO 1_2/2 fres/GHz 2.4 2.2 2 1.8 1.6 1.4 1.2 1 0 5V/10mA Phase Noise: