AXLE135

Issue: 01 Specification AXLE135 Oscillator type : TCXO in Half-size DIL package Date:2008-05-07 Parameter Frequency range Frequency stability vs. temperature vs. supply voltage variation vs. load change long term (aging) per year Frequency adjustment range Mechanical (internal trimmer) Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform min. 10 1 typ. max. 50 800 Unit MHz MHz ppm ppm ppm ppm ppm ppm ppm V V kΩ Condition (Clipped) Sinewave HCMOS, PECL, LVDS See tables 1 & 2 ± 10 % @+40°C Option 1 = blank Option 1 = “V” Option 2 = “3” Option 2 = “5” ± 0.5 ppm to ± 5 ppm ± 0.1 ± 0.3 ± 0.2 ±1 ±3 ±5 0.15 0.5 100 1.65 2.5 positive 3.15 4.5 Load Amplitude Supply voltage VS Current consumption (Note 3) Storage temperature range Enclosure (see drawing) Marking Packing Construction Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated 2. All combinations of options might not be available. Please consult factory 3. Depending on frequency and supply voltage Sine wave Clipped Sine wave HCMOS PECL LVDS 50 Ω 10 kΩ || 10 pF 15 pF 50 Ω + bias 0 dBm +10 dBm 0.8 V p-p 1.0 V p-p According to relevant Logic Standard 3.15 3.3 3.45 V 4.75 5.0 5.25 V 12 ~ 20 mA 2 ~ 30 mA 15 ~ 50 mA 25 ~ 100 mA -45 +90 °C 12.7 x 12.7 x 5.1 max. mm AXLE135 Freq wwAXPyy Tape & reel Lead(Pb) -free Option 3 = “S” Option 3 = “C” Option 3 = “H” Option 3 = “P” Option 3 = “L” Option 3 = “S” Option 3 = “C” Option 3 = “H” Option 3 = “P” or “L” Option 3 = “S” / 3.3 V Option 3 = “S” / 5.0 V Option 3 = “C” / 3.3 V Option 3 = “C” / 5.0 V Option 3 = “H”, “P”,“L” Option 2 = “3” Option 2 = “5” Option 3 = “S” Option 3 = “C” Option 3 = “H” Option 3 = “P” or “L” IEC60679-3 CO 21 Specification Frequency ww=week, yy=year IEC 60286-3 GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXLE135 page 1(2) ww.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com Frequency Stability over Temperature Table 1 Code4 Stability 05 ± 0.5 10 ± 1.0 15 ± 1.5 20 ± 2.0 25 ± 2.5 30 ± 3.0 35 ± 3.5 50 ± 5.0 Table 2 Lower Temperature Code5 Temp/°C 0 0 1 -10 2 -20 3 -30 4 -40 Upper Temperature Code5 A B C D E F Temp/°C +50 +60 +70 +75 +80 +85 Ordering Code: Part number AXLE135 Option 1* EFC* Option 2 Supply Voltage Option 3* Output* Option 4 Stability Option 5 Temp. range _ or “V” 5 or 3 S, C, H, P, L See tables 1 & 2 *EFC Option not available for PECL and LVDS Output Example: AXLE135V-5-S-10-3D Enclosure drawing Pin connections (No EFC) Pin # Symbol Function 1 N.C. or No Connection or ComplOUT Complementary Output (PECL and LVDS) 2 GND Ground 3 RF OUT RF Output 4 Vs Supply Voltage Pin connections (With EFC) Pin # Symbol 1 VC 2 GND 3 RF OUT 4 VS Function Voltage Control (EFC) Ground RF Output Supply Voltage GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXLE135 page 2(2) ww.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com