AGM1264R

AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: REVISED: AGM1264R Series FEB 14, 2007 1.General Specifications 1. Features A. Drive Method: 1/64 Duty, 1/9 Bias B. The Module Operating Voltage: 3.3V; C. The LCD Operating Voltage : 9.7V; D. Viewing Direction: E. Operating Temperature: F. Storage Temperature: G. Display mode: 6:00h -20℃~70℃ -30℃~85℃ FSTN mode, positive type display 2. Characteristics of backlight (LED unit) Item Forward Voltage Forward Current Luminous Color WARNING: Symbol VF IF LV Min. 2.85 Typ. 3.2 90 60 Max. 3.5 120 BLUE Unit V mA cd/m2 Condition IF=90mA IF=90mA A BACKLIGHT IS A KIND OF CURRENT DEVICE,IT MUST CONNECT A RESISTANCE FOR LIMITING CURRENT ,OR IT WILL BE DAMAGED. 3. Mechanical (2) Viewing (3) Dot Data: 72.0 w * 90.0 h 66.4 w * 39.4 h 0.45 w * 0.53 h 128 * 64 Dots See Attached Drawing mm mm mm Area ---------------------------------------- (1) Module Size ----------------------Size (4) Number of Dots -----------------(5) Outline Dimensions------------- Page 1 4. Pin Connections: Pin No. 1 2 3-7 8 9 10 11 12 13 14 15 16-23 24 25 26 27 28 Symbol P/S C86 V5-V1 CAP2+ CAP2CAP1CAP1+ CAP3VOUT VSS VDD D7-D0 /RD(E) /WR(R/W) A0 /RES /CS1 LEVEL INPUT INPUT INPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT 0V(GND) +5V H/L H/L H/L H/L H,H-L H/L Function This is the parallel data input/serial data input switch terminal This is the MPU interface switch terminal This is a multi-level power supply for the liquid crystal drive VDD≥V1≥V2≥V3≥V4≥V5 DC/DC voltage converter capacitor 2 positive connection DC/DC voltage converter capacitor 2 negative connection DC/DC voltage converter capacitor 1 negative connection DC/DC voltage converter capacitor 1 positive connection DC/DC voltage converter capacitor 3 negative connection DC/DC converter output Groud Power supply for logic Data bit Signal to select read and write Signal to select read and write Control/data select signal Reset signal Chip select signal Page 2 5.Timing Characteristics: Page 3 Page 4 Page 5 2.The Characteristics and The Reliability Test 1.Electro-Optic Characteristics: Condition:TEMP=(23±3)℃ Vdd: 5.0V NO 1 2 Item Supply Voltage(Logic) LCD Operating Voltage Response Time Contrast 12H 5 Viewing Angel 6H 3H 6 9H LCD Threshold Voltage Symbol Vdd-Vss Vdd-V0 Ton Toff CR θ1 θ2 θ3 θ4 Vth Min 3.0 Typ. 3.3 10.1 9.7 9.3 3 4 60 316 3 45 55 50 50 7.78 Deg . V 25℃ (CR≥3.0) Max 3.6 Unit V V V V ms ms Condition -20℃ 25℃ 70℃ Hum=(70±5)%RH Page 6 3.Reliability Test No Items High TEMP Storage 1 Low TEMP Storage 2 High TEMP Operating 3 Test Condition TEMP: 85±2℃ Time: 96h Restore:24h TEMP: -30±3℃ Time: 96h Restore:24h TEMP:70±2℃ Vop: 5V Timp: 24h Restore:24h TEMP:-20±2℃ Vop: 5V Timp: 24h Restore:24h Equipment Tenny Test Result Passed Tenny Passed Tenny Passed Low TEMP Operating 4 Tenny Passed 5 High TEMP High TEMP:40±2℃ Hum Storage Hum: 95%Rh Time: 96h Restore:24h Thermal Shock TEMP:(℃) 85℃ 25℃ Tenny Passed 6 -30℃ 30 5 30 5 Min Tenny Passed 5 Cycles Restore:24h P age 7 4.Instruction Sets P a ge 8 P a ge 9 5. Block Diagram D0~D5 D6 D7 V1 V2 V3 V4 V5 A0 /WR(R/W) /RD(E) PS C86 /CS1 /RES VDD VSS VOUT CAP1+ CAP1CAP2+ CAP2CAP3- COM64 LCD PANEL SEG0~SEG127 CONTROLLER & DRIVER SEG127~SEG0 SEG128 LED+ LED- LED LIGHT-BOX P a ge 10 6. Mechanical Outline P ag 11 e