AGM6424B

AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: DATE: AGM6424B March 8, 2006 Page 1 of 19 AGM6424B 3. LCD Module 3.1 Main Data No. Item 173.0(W) x Contents 73.0(H) x x 7.0(D) Unit mm mm dots mm mm °C °C pc g (1) Module size (2) Viewing area (3) Dot Number (4) Dot Size (5) Dot pitch (6) LCD type 640 (156.0) (W) (60.0) (H) x 240 (H) x 3 (R.G.B) (W) 0.065(W) x 0.225(H) 0.08(W) x 0.24(H) •Color-STN (Negative & transmissive type) • with glare upper polarizer . (7) Contrast ratio (8) Duty (9) Viewing direction (10) Operating temperature (11) Storage temperature (12) Backlight (13) Power Supply Voltage (14) Weight (30) 1/244 6 o‘clock -20 -30 ~ ~ +70 +80 LED x 10 3.3V 122 Page 2 of 19 173.0 157.6±0.3 (156.0) 153.585±0.1 2 1 CN2 Bezel Opening Area Active Area 61 .6 ± 0.3 (60.0 ) 5 7.585 ± 0.1 7.0 3.1 (105.0) 12.3 3.2 Outline Dimension 8.7 0.2 4 0.22 5 Active Area Center 1 CN1 0.08 (39.5 ) Inserting Direction 0.065 20 (2 0.05) 73 .0 RGB (4.3) 640(RGB) X 240 DOTS Viewing Dirrction (91.1) 2.7 CN1 : 52893-2070(MOLEX) CN2 : BHSR-02VS-1 (JST) Note 1 : All dimensional tolerance unless otherwise specified+/-0.5 Note 2 : Scale : NTS , Unit : mm AGM6424B Page 3 of 19 AGM6424B 3.3 Interface Pin Connection CN1 : 52893-2070(MOLEX) / Suitable FPC : Pitch 0.5mm, width 10.5mm Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Signal FLM VSS CL1 VSS CL2 VSS DISP VDD VCON VSS D0 D1 D2 D3 VSS D4 D5 D6 D7 VSS Scan NC Input GND Data shift clock GND Display Logic GND Display data Display data Display data Display data GND Display data Display data Display data Display data NC Contrast control supply adjust signal voltage H:ON , L:OFF voltage data latch signal start-up signal Pin Function CN2 : BHSR-02VS-1 (JST) / Suitable connector : SM02B-BHSS-1-TB (JST) Pin No. 1 2 Signal LED(+) LED(-) LED GND Pin Function Power supply voltage for LED Page 4 of 19 AGM6424B 2. Block Diagram CN1 FLM CL1 CL2 DISP D0~D7 Y1 Column Driving Circuit Y 1 92 0 Circuit X1 Driving COLOR LCD PANEL 640×RGB×240 DOTS X240 VDD VSS VCON Power Supply Circuit CN2 LED VLED(+) VLED(-) Row Page 5 of 19 AGM6424B 6. Electrical Characteristics 6.1 Electrical Characteristics of LCD Item Power Supply for Logic Contrast adjust voltage Input Signal Voltage Note (2) Power supply current Note (3) Frame Freguency Note (4) Symbol VDD VCON VIH VIL IDD fFLM Condition MIN. － 3.0 Ta= 5°C 0.8 Note(1) Ta=25°C 1.3 Ta=40°C － “H” Level 0.8VDD “L” Level 0 VDD=3.3V － － (60) Typ. 3.3 － 1.8 － － － 130 (75) Max. 3.6 － 2.3 2.8 VDD 0.2VDD 180 (90) Unit V V V mA Hz Note (1) In proportion as the VCON voltage decrease the brightness will increase. The value is specified as the voltage at which the optimum contrast is obtained. Note (2) FLM,CL1,CL2,DISPOFF,D0~D7 Note (3) fFLM=75Hz,Ta=25°C,Display pattern is Black/White cross pattern as below. RGB RGB Note (4) Need to make sure that there is no flicker and ripple phenomenon when setting the Frame Frequency in your set. 6.2 Electrical Characteristics of Backlight Symbol Min. Typ. Max. Unit Voltage VLED (18.0) (20.0) V Current ILED 40.0 mA Number of LED 10 EA Power Consumption 0.72 W Note (1): VLED = VLED(+) – VLED(-) . Note (2): The current of LED is 20 mA for each one. LED driving in constant current mode is recommended . Note (3): LED power consumption is around 0.072W for each one. Item Condition Note 1 Note 2 Note 3 Page 6 of 19 AGM6424B 7. Optical Characteristics 7.1 Optical Characteristics of LCD Item Viewing Angle Range Contrast Ratio Response Time Rise Fall R G B W Symbol Condition X axle Y axle φ=0° Min. 20 0.50 0.29 0.26 θ=0°,φ=0° 0.49 0.10 0.11 0.25 0.30 Note 2. Typ. 60 35 30 (360) (130) 0.55 0.34 0.31 0.54 0.15 0.16 0.30 0.35 φ1, φ2 CR≥2 CR tr tf x y x y x y x y Ta= 25°C.(Backlight On) Max. Unit Remark 0.60 0.39 0.36 0.59 0.20 0.21 0.36 0.40 Deg. ms ms Note 1,2 Note 3,4 Note 5 θ=0°,φ=0° θ=0°,φ=0° Color Tone (CIE Coordinate) Note 1. Definition of θ and φ Definition of Viewing angle φ1 and φ2 φ2 Y(θ=180°) φ1 Eye from (θ,φ1) Eye from (θ,φ2) CR X θ Y(θ=0°) X‘ 2.0 φ1