ED097OC1

P-511-534(V :2), DO-2009-047_2, Issue date :2009/02/04 E D 097OC 1 V ers io n : 2 .0 T E C HNIC AL S P E C IF IC AT ION MODE L NO. : E D097OC 1 T he content of this information is subject to be changed without notice. Pl ease contact PV I or i ts agent for further information C us tomer•s C onfirmation C us tome r D a te By FOR MORE INFORMATIO N: AZ DISPLAY S, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAY S.com C onfirmed B y Prepared B y 1/18 The copyright belongs to PVI. Any unauthorized use is prohibited. T he information contained herein is the exclus ive property of P rime V iew I nternational C o., Ltd. and s hall not be dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew I nternational C o., Ltd. P AG E :1 V er:002 P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 Revision History Rev. Issued Date Revised Contents 1.0 Set.10.2008 New 2.0 November.7.2008 Add Page 7 Page 12 Modify Page 4 Page 10 Page 12 6-2) Absolute maximum rating Note 8-1 3. Mechanical Specifications 7. Power on Sequence 8-1)Specifications Add Contrast ratio Typ= 7 Update time 1000/540 change to 780/260 ( 2-4 bits/1bits) Page 19 14. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2 Ver:002 2/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 TECHNICAL SPECIFICATION CONTENTS NO. - ITEM Cover PAGE 1 - Revision History 2 - Contents 3 1 Application 4 2 Features 4 3 Mechanical Specifications 4 4 Mechanical Drawing of EPD module 5 5 Input/Output Terminals 6 6 Electrical Characteristics 7 7 Power on Sequence 10 8 Optical Characteristics 12 9 Handling, Safety and Environment Requirements 14 10 Reliability test 15 11 Bar Code definition 16 12 Border definition 17 13 Block Diagram 17 14 Packing 18 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 Ver:002 3/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 1. Application The display is a TFT active matrix electrophoretic display, with associated interface and control logic, and a reference system design. The 9.7” active area contains 1200x825 pixels, and has full 1~4 bit display capabilities An integrated circuit containing interface, timing and control logic is supplied with each panel. 2. Features High contrast TFT electrophoretic 1200x825 display High reflectance Ultra wide viewing angle Ultra low power consumption Pure reflective mode Bi-stable Commercial temperature range Landscape, portrait mode Antiglare hard-coated front-surface 3. Mechanical Specifications Parameter Screen Size Display Resolution Active Area Pixel Pitch Pixel Configuration Outline Dimension Specifications 9.7 1200 (H) 825(V) 202.8 (H) 139.425 (V) 0.169(H)x0.169(V) Rectangle 218.8(H) 156.425(V) 1.18(D) Unit Inch Pixel mm mm Remark mm Module Weight 80 5 g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 Ver:002 4/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 4. Mechanical Drawing of EPD Module 1. RTV GLUE DISPENSE(EQUAL OR UNDER PROTECTION MYLAR HEIGHT) NO GLUE IN THIS AREA WITH RESPECT TO HEAT BONDING FPC DETAIL"A" Scale:2/1 0.04±0.02 PROTECTION MYLAR THICKNESS 1.18±0.10(WITHOUT PROTECTION MYLAR) VIEW"B" Scale:2/1 1.20 MAX.(UV GLUE AREA) VIEW "B" (1.6) 0.145±0.05 156.425(Panel Outline) 43.0±0.50 82.71 73.71 (19.6) 4.02 1.02 11.81 38.8880 11.81 33.8455 11.81 24.9075 (9.5) (4.58) 1 1 REINFORCING(PI) 0.30±0.05 6.00±0.5 NOTE: 33 1 113.40 16.84 0) (R0 .5 50.76 Layer (1.00) 218.80(Panel Outline) 204.40(Border) 202.80±0.002(Active Area) 205.50±0.20(FPL) 208.50±0.20(PS) 16.84 (198.6) Active Area Center 50.76 169.4 105.40 16.84 29.38 363 139.425±0.002(Active Area) 141.025(Border) 2.65 1.15 142.13±0.20(FPL) 146.93±0.20(FPL) 145.13±0.20(PS) 149.93±0.20(PS) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 DETAIL"A" 1.15 2.65 (15.1) (16.2) 1.18 3.48 (8.4) (69.5) (8.4) (71.7) (23.4) 2. GENERAL TOLERANCE:±0.3 0.7±0.07 (1.0) Ver:002 5/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 5.Input/Ouput Terminals 5-1)Pinout List Pin # Signal Description 1 VNEG Negative power supply source driver 2 NC NO Connection 3 VPOS Positive power supply source driver 4 NC NO Connection 5 VSS Ground 6 NC NO Connection 7 VDD Digital power supply drivers 8 XCL Clock source driver 9 XLE Latch enable source driver 10 XOE Output enable source driver 11 XSHR Shift direction source driver 12 XSTL2 Start pulse source driver 13 D0 Data signal source driver 14 D1 Data signal source driver 15 D2 Data signal source driver 16 D3 Data signal source driver 17 D4 Data signal source driver 18 D5 Data signal source driver 19 D6 Data signal source driver 20 D7 Data signal source driver 21 NC NO Connection 22 VCOM Common connection 23 NC NO Connection 24 VGG Positive power supply gate driver 25 NC NO Connection Negative power supply gate driver 26 VEE 27 NC NO Connection 28 MODE2 Output mode selection gate driver 29 MODE1 Output mode selection gate driver 30 XRL Shift direction gate driver 31 SPV Start pulse gate driver 32 CKV Clock gate driver 33 BORDER Border connection The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 Ver:002 6/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 6.Electrical Characteristics 6-1) Panel interface description This panel is intended to be driven by EPD display controller ASIC. 6-2) Absolute maximum rating Parameter Logic Supply Voltage Positive Supply Voltage Negative Supply Voltage Max .Drive Voltage Range Supply Voltage Supply Voltage Supply Range Operating Temp. Range Storage Temperature Symbol VDD VPOS VNEG VPOS - VNEG VGG VEE VGG-VEE TOTR TSTG Rating -0.3 to +7 -0.3 to +18 +0.3 to -18 36 -0.3 to +45 -25.0 to +0.3 -0.3 to +45 0 to +50 -25 to +70 Unit V V V V V V V 6-3) Panel DC characteristics Parameter Symbol Conditions Min Typ Max Unit Signal ground VSS - 0 - V Logic Voltage supply VDD 3.0 3.3 3.6 V IVDD VDD=3.3V - 0.75 1.5 mA Gate Negative supply VEE -21 -20 -19 V IEE GVEE =-20V - 3.9 11.7 mA Gate Positive supply VGG 21 22 23 V IGG GVDD = 22V - 3.3 9.9 mA Source Negative supply VNEG -15.4 -15 -14.6 V INEG VNEG = -15V - 44.9 89.8 mA Source Positive supply VPOS 14.6 15 15.4 V IPOS VPOS = 15V - 44.1 88.3 mA Border supply VBorder VPOS = 15V 14.6 15 15.4 V VNEG = -15V -15.4 -15 -14.6 V Asymmetry source VAsym VPOS+VNEG Common voltage VCOM -800 -2 0 Adjusted 800 -0.3 mV V ICOM - 0.59 - mA Maximum power panel PMAX - - 3200 mW Standby power panel PSTBY - - 0.6 mW Typical power panel PTYP - 1500 - mW Operating temperature 0 - 50 Storage temperature -25 - 70 Maximum image update time at 25 - 1000 - ms The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 Ver:002 7/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 The maximum power and maximum currents are specified for the worse case power consumption. This occurs when 2 horizontal inverted stripped images are displayed The typical power is the consumed power when “typical images” are displayed. The standby power is the consumed power when the panel controller is in standby mode. The listed electrical/optical characteristics are only guaranteed under the controller & waveform provided by PVI Vcom is recommended to be set in the range of assigned value 0.1V 6-4 )Panel AC characteristics VDD=3.0V to 3.6V, unless otherwise specified. Parameter Symbol Min. Typ. Max. Unit App Pin Clock frequency fckv - - 200 kHz Minimum “L” clock pulse width twL 0.5 - - us CKV Clock rise time trckv - - 100 ns Clock fall time tfckv - - 100 ns Data setup time tSU 100 - - ns CKV, SPV Data hold time tH 100 - - ns Pulse rise time trspv - - 100 ns Pulse fall time tfspv - - 100 ns SPV Clock CL cycle time tcy 50 - DC ns D0 .. D7, SPH setup time tsu 8 - - ns D0 .. D7, SPH hold time th 1 - - ns Below table LE on delay time tLEdly 40 - - ns LE high-level pulse width tLEw 40 - - ns LE off delay time tLEoff 40 - - ns CLOCK & DATA TIMING CL tLEdly tLEoff LE tLE tOUT OUT1 ~ OUT400 OUTPUT LATCH CONTROL SIGNALS The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 Ver:002 8/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 SPH 10% tstls tstlh 10% CL tcy 90% 90% 10% D0~D7 10% tsu th tfckv twl trckv CKV 90 90 10 10 tus tfspv th SPV trspv 90 90 10 6-5) Power Consumption 10 Parameter Maximum panel power consumption during update. Power consumption in standby mode Typical panel power Symbol Conditions TYP Max - Unit mW mW mW Remark - 1500 3200 0.6 - The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 Ver:002 9/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 7.Power on Sequence 1. VSS 2. VEE VDD VNEG VPOS (Source driver) VGG(Gate driver) VGG V POS T1 T2 T3 T4 T5 T6 T7 VDD VSS VEE V NEG Logic signal input T1: 100 µs(min) T2: 0µs(min) T3: 1000µs (min) T4: 0 µs (min) T5: 0 µs (min) T6: 0 µs (min) T7: 0 µs (min) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 Ver:002 10/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 It is expanded as blew. VDD Sequence VPOS Sequence VNEG Sequence VEE Sequence VGG Sequence Logic signal input Sequence The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 Ver:002 11/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 8. Optical characteristics 8-1)Specifications Measurements are made with that the illumination is under an angle of 30 degrees, the detection is perpendicular unless otherwise specified. T = 25oC SYMBOL PARAMETER CONDITIONS MIN TYP. MAX UNIT R Reflectance White 30 35 DS+(WS-DS) n/(m-1) - % Note Note 8-1 - Gn Nth Grey Level - - - L* CR Contrast Ratio - 6 7 - ms ms Tupdate Update time 2~4-bit mode 1-bit mode 780 260 - - WS: White state , DS: Dark state, Gray state from Dark to White :DS m:4 8 16 when 2 3 4 bits mode Note 8-1: Luminance meter :Eye – One Pro Spectrophotometer 8-2)Definition of contrast ratio G1 G2… Gn… Gm-2 WS The contrast ratio (CR) is the ratio between the reflectance in a full white area (Rl) and the reflectance in a dark area (Rd): CR = Rl/Rd Light Sensor Light Source Driving Circuit Panel The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 Ver:002 12/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 8-3)Reflection Ratio The reflection ratio is expressed as: R = Reflectance Factorwhite board x ( Lcenter / Lwhite board ) Lcenter is the luminance measured at center in a white area (R=G=B=1). Lwhite board is the luminance of a standard white board. Both are measured with equivalent illumination source. The viewing angle shall be no more than 2 degrees. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 Ver:002 13/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 9.HANDLING, SAFETY AND ENVIROMENTAL REQUIREMENTS WARNING The display glass may break when it is dropped or bumped on a hard surface. Handle with care. Should the display break, do not touch the electrophoretic material. In case of contact with electrophoretic material, wash with water and soap. CAUTION The display module should not be exposed to harmful gases, such as acid and alkali gases, which corrode electronic components. Disassembling the display module can cause permanent damage and invalidate the warranty agreements. Observe general precautions that are common to handling delicate electronic components. The glass can break and front surfaces can easily be damaged. Moreover the display is sensitive to static electricity and other rough environmental conditions. Data sheet status Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information W here application information is given, it is advisory and does not form part of the specification. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 Ver:002 14/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 10. Reliability test TEST 1 High-Temperature Operation CONDITION METHOD REMARK At the end of the test, electric, mechanical, and optical specifications shall be satisfied. At the end of the test, electric, mechanical, and optical specifications shall be satisfied. At the end of the test, electric, mechanical, and optical specifications shall be satisfied. At the end of the test, electric, mechanical, and optical specifications shall be satisfied. At the end of the test, electric, mechanical, specifications shall be satisfied. At the end of the test, electric, mechanical, specifications shall be satisfied. At the end of the test, electric, mechanical, specifications shall be satisfied. Optical characteristics shall be satisfied. At the end of the test, electric, mechanical, and optical specifications shall be satisfied. T = +50°C, RH = 30% for 240 hrs IEC 60 068-2-2Bp 2 Low-Temperature Operation T = 0°C for 240 hrs IEC 60 068-2-2Ab 3 High-Temperature Storage T = +70°C, RH=23% for 240 hrs IEC 60 068-2-2Bp 4 Low-Temperature Storage T = -25°C for 240 hrs IEC 60 068-2-1Ab 5 High-Temperature, T = +40°C, RH = 90% for 168 hrs High-Humidity Operation IEC 60 068-2-3CA 6 High Temperature, High- Humidity Storage T = +60 , RH=80% for 240hrs IEC 60 068-2-3CA 7 Temperature Cycle -2 5 +70 , 100 Cycles 30min 30min IEC 60 068-2-14 8 UV exposure Resistance 765 W/m for 168hrs,40 2 IEC60 068-2-5Sa 9 Package Vibration 1.04G, Frequency: 10~500Hz Direction: X,Y,Z Duration: 1 hours in each direction Full packed for shipment 10 Package Drop Impact Drop from height of 122 cm on concrete surface. Drop sequence: 1 corner, 3 edges, 6 faces One drop for each. full packed for shipment At the end of the test, electric, mechanical, and optical specifications shall be satisfied. 11 Electrostatic Effect (non-operating) (Machine model) 250V 0 , 200pF IEC 62179, IEC 62180 At the end of the test, electric, mechanical, specifications shall be satisfied. 12 Altitude test Operation 700hPa ( = 3000m ) 48Hr At the end of the test, electric, mechanical, specifications shall be satisfied. 13 Altitude test Storage 260hPa ( = 10000m ) 48Hr At the end of the test, electric, mechanical, specifications shall be satisfied. 14 Stylus Tapping POLYACETAL Pen: Top R:0.8mm Load: 300gf Speed: 2 times/sec Total 13,500times, Pass criteria – no glass breakage or damage to microcapsules. Actual EMC level to be measured on customer application The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 Ver:002 15/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 11. Bar Code definition E0D 00 4 01 1 I 7 4 00361 A T 1 2 3 4 2 5 6 2 7 2 8 1 EPD model code: ED097OC1:E0D 2 Internal control codes: 3 FPL reversion code V100:3,V110:4 4 FPL batch code: (BL/P/B...)001~009:01~99, 100~109:A0~A9, 110-119:B0~B9… 320~329:Z0~Z9 5 Year: F:2005 / G:2006 / H:2007 / I:2008 /... / Z:2025 6 Month: 1:Jan. 7 2:Feb. ... 9:Sep. A:Oct. B:Nov. C:Dec. Serial number 8 MFG code: TOC:T, PVI:P The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 Ver:002 16/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 12. Border definition 13.Block Diagram 33 PIN Input The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 Ver:002 17/18 The copyright belongs to PVI. Any unauthorized use is prohibited. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 ED097OC1 14.Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 Ver:002 18/18 The copyright belongs to PVI. Any unauthorized use is prohibited.