PD057VT2

P-511-537(V:2) P D057V T 2 V ers ion : 2 .0 T E C HNIC AL MODE L S P E C IF IC AT ION NO. : P D057V T 2 T he content of this information is s ubject to be changed without notic e. P leas e contact P V I or its agent for further information. C us tomer•s C onfirmation C us tome r D a te FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com By P V I•s C onfirmation C onfirme d B y P re pa re d B y T he information contained herein is the exclus ive property of P rime V iew I nternational C o., Ltd. and s hall not be dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew I nternational C o., L td. P age:1 P-511-537(V:2) PD057VT2 Revision History Rev. Issued Date 1.0 Jul.10, 2007 2.0 May 19, 2009 Eng. Revised Contents New Delete FPC connector pin pitch Before Connector type: ELCO 08-6210-033-340-800A+, PIN No 33 pins, pitch=0.5mm After Connector type: ELCO 08-6210-033-340-800A+, PIN No 33 pins The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 P-511-537(V:2) PD057VT2 TECHNICAL SPECIFICATION CONTENTS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ITEM Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Interface Timing Power On Sequence Optical Characteristics Handling Cautions PAGE 1 2 3 4 4 4 5 6 7 7 8 9 10 12 12 16 18 19 Reliability Test Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 P-511-537(V:2) PD057VT2 1. Application This data sheet applies to a color TFT LCD module, PD057VT2. PD057VT2 module applies to OA product, car TV (must use Analog to Digital driving board), which requires high quality flat panel display. If you must use in severe reliability environment, please don’t extend over PVI’s reliability test conditions. 2. Features . VGA (640*480 pixels) resolution . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Thin and light weight . Display Colors 262,144 colors . TTL interface 3. Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension W eight Back-light Surface treatment Display mode Gray scale inversion direction Specifications 5.7 (diagonal) 640 (R,G,B) 480 262,144 115.20 (H) 86.4 (V) 0.18(H) 0.18(V) Stripe 144.0 (W) 104.6(H) 13.0 (D) (typ.) 210 10 CCFL , 1 tube Anti-glare + EWV film Normally white 6 o`clock [ ref. to Note 12-1] Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 P-511-537(V:2) PD057VT2 4.Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 P-511-537(V:2) PD057VT2 5.Input / Output Terminals 5-1) TFT-LCD Panel Driving Connector type: ELCO 08-6210-033-340-800A+, PIN No 33 pins Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Symbol I/O GND I CK I Hsync I Vsync GND R0 I R1 I R2 I R3 I R4 I R5 GND I G0 I G1 I G2 I G3 I G4 I G5 GND I B0 I B1 I B2 I B3 I B4 I B5 GND I ENAB VCC VCC R/L U/D V/Q GND I I I Description GND Clock signal for sampling each data signal Horizontal synchronous signal (neqative) Vertical synchronous signal (neqative) GND RED data signal (LSB) RED data signal RED data signal RED data signal RED data signal RED data signal (MSB) GND GREEN data signal (LSB) GREEN data signal GREEN data signal GREEN data signal GREEN data signal GREEN data signal (MSB) GND Blue data signal (LSB) Blue data signal Blue data signal Blue data signal Blue data signal Blue data signal (MSB) GND Signal to settle the horizontal display position(positive) +3.3V power supply +3.3V power supply Horizontal display mode select signal L Normal ,H Left /Right reverse mode Vertical display mode select signal H Normal ,L Up/Down reverse mode H Normal GND Remark Note5-1 Note5-2 Note5-1 The horizontal display start timing is settled in accordance with rising of ENAB signal. In case ENAB is fixed ”Low”,the horizontal start timing is determined as described in 10-2. Don`t keep ENAB”High” during operation. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 P-511-537(V:2) PD057VT2 Note 5-2 The definitions of U/D & R/L R/L(PIN 30)= Low, U/D(PIN 31)= High R/L(PIN 30)= High , U/D(PIN 31)= Low 5-2) Backlight driving Connector type: JST BHR-03VS-1, PIN No 3 pins Pin No 1 2 3 Symbol VHigh NC VLow No connect Power supply for lamp (Low voltage side) Description Power supply for lamp (High voltage side) White Remark Pink Note 5-3 : Low voltage side of backlight inverter connects with ground of inverter circuits. 6.Absolute Maximum Ratings: Parameters Input Voltage Symbol VI Condition MAX. GND=0V, Ta=25 Unit V Remark Note6-1 Ta=25 -0.3~+4 Ta=25 +3.3V supply voltage VCC 0~+3.6 V Note6-1:CK,R0~R5,G0~G5,B0~B5,Hsync,Vsync,ENAB,R/L,U/D,V/Q 7.Electrical Characteristics 7-1) Recommended Operating Conditions: Item +3.3V Supply Voltage Permissive input ripple voltage Input voltage(Low) Input voltage(High) Symbol VCC VRF VIL VIH Min. Typ. Max. GND=0V, Ta=25 Unit Remark V mVp-p VCC=3.3V V V +3.0 0 0.7 VCC +3.3 - +3.6 100 0.3 VCC VCC The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 P-511-537(V:2) PD057VT2 7-2) Recommended Driving Condition for Back Light Ta=25 Parameter Symbol Min. Typ. Max. Unit Remark Lamp Voltage VL 639 710 781 V IL=5mA Lamp Current IL 4 5 8 mA Note 7-1 Lamp Frequency FL KHz Note 7-2 35 Vs Vrms Note 7-3 Starting Voltage (25 ) 1240 (Reference Value) Vs Vrms Note 7-3 Starting Voltage (0 ) 1380 (Reference Value) Note 7-1 In order to have proper operation of the B/L, no matter what kind of inverters, the output lamp current must be between Min. and Max. values to avoid the abnormal display image caused by B/L. Note 7-2 The driving frequency of the lamp may interfere with the horizontal synch signal, leaving interference stripes on the display. So please evaluate LCD panels beforehand. To avoid interference stripes, we recommend to separate as far as possible the lamp frequency from the horizontal synchronous signal and its high harmonic frequency. The inverter which PVI uses is TAD347-1. Note 7-3 The “Starting Voltage” means the minimum voltage of inverter to turn on the lamp. And it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on. 7-3) Power Consumption Parameters Symbol Typ. Max. Unit Remark +3.3V Current Dissipation ICC 67 100 mA LCD Panel Power Consumption 0.22 0.33 W Note 7-4 Backlight Power Consumption 3.55 3.91 W Note 7-5 Note 7-4: The power consumption for back light is not included. Note 7-5: Back light lamp power consumption is calculated by IL VL. 8. Pixel Arrangement The LCD module pixel arrangement is stripe configuration. 640 478 479 480 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 P-511-537(V:2) PD057VT2 9. Display Color and Gray Scale Reference Input Color Data Green 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 Color Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow W hite Red (00) Red (01) Red (02) Darker Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker Green Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker Blue Brighter Blue (61) Blue (62) Blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 Red 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 Blue 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 R5 R4 R3 R2 R1 R0 G 5 G 4 G 3 G 2 G 1 G 0 B5 B4 B3 B2 B1 B0 Basic Colors Red 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 000000000000111101 000000000000111110 000000000000111111 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 P-511-537(V:2) PD057VT2 10. Interface Timing 10-1) Timing Parameters Note 10-1 : In case of low-frequency, the deterioration of display quality, flicker etc., may occur. 10-2) Display Position in horizontal direction Display position in horizontal direction is designated by rising timing of ENAB signal. When ENAB is fixed to “Low”, the horizontal display will starts from 144th clock after HS falling. 10-3) Display Position in vertical direction th Display start position in vertical direction is fixed to the 35 line. The ENAB signal does not relate to Vertical display position. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 P-511-537(V:2) PD057VT2 10-4) Timing Diagram THWh Tcph Tcwh *Only when enable terminal is fixed “ Low” Tcwl Tdhd Tdsu Horizontal invalid data period D638 D639 D640 Horizontal invalid data period THs Tesu Twv TSTV Vertical Vertical invalid data period DH1 DH2 DH3 DH479 DH480 Vertical invalid data period The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 P-511-537(V:2) PD057VT2 11. Power On Sequence VDD 3.0V 3.0V Signal*3 0.3V t1 t2 t3 OFF 10ms 1. 0 2. 0 3. 0 t1 t2 t3 20ms 50ms 1s Back Light ON 10ms OFF 12. Optical Characteristics 12-1) Specification: Parameter Symbol Horizontal Viewing Angle Vertical (to 6 o’clock) (to 12 o’clock) CR Tr Tf U% x y =0 Condition MIN. TYP. MAX. Ta=25 Unit Remarks deg deg deg ms ms cd/ % % hrs IL= 5mA Note 12-2 Note 12-3 Note 12-4 Note 12-5 Note 12-6 Note 12-1 70 CR 10 75 70 50 600 15 25 500 85 0.31 30 50 3.5 0.34 65 45 Contrast Ratio Response time Brightness Luminance Uniformity Cross Talk W hite Chromaticity Lamp Life Time Rise Fall At optimized viewing angle =0 =0°/ =0 400 450 80 0.28 0.33 0.36 0.39 50000 - The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 P-511-537(V:2) PD057VT2 Note 12-1: The definitions of viewing angles are as follow 12 o clock Lamp connector θ 3 o clock 9 o clock φ Note 12-2: The definition of contrast ratio CR = 6 o clock Luminance at White Pattern Luminance at Black Pattern Note 12-3: Definition of Response Time Tr and Tf: W hite 1 00% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 Black W hite P-511-537(V:2) PD057VT2 Note 12-4: All optical measurements shall be performed after backlight being turned-on for 30 mins. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) Note 12-5: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter: BM-5A or BM-7 fast (TOPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicular to the surface of module The test pattern is white. 500 mm +/- 50 mm 1/6 2/6 Field = 1° TFT-LCD module Optical characteristics measuring configuration 1 /6 2/6 2/6 1/6 2/6 1/6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 P-511-537(V:2) PD057VT2 Note 12-6: Cross Talk (CTK) = ⏐YA-YB⏐ 100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A (Gray Level 31) YA 1/3 1/3 1/3 1/3 : Measuring Point (A and B are at the same point.) 1/3 1/3 Black (Gray Level 0) Pattern B (Gray Level 31, central black box exclusive) YB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 P-511-537(V:2) PD057VT2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 P-511-537(V:2) PD057VT2 Figure 13-1 the way to peel off protective film The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 P-511-537(V:2) PD057VT2 14. Reliability Test No Test Item Test Condition Ta = +80 , 240 hrs Ta = -40 , 240 hrs Ta = +70 , 240 hrs Ta = -30 , 240 hrs Remark 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature Operation Test 4 Low Temperature Operation Test 5 6 Operation Test Thermal Cycling Test (non-operating) High Temperature & High Humidity Ta = +60 , 90%RH, 240 hrs (No Condensation) -20 +70 , 200 Cycles 30 min 30 min Frequency: 10 ~ 57 HZ /Vibration Width:0.075mm 2 58-500 Hz / Gravity: 9.8m/s Sweep time: 11 minutes Test period: 3 hrs for each direction of X, Y, Z Gravity: 490m/s2 * 6ms Direction: X, Y, Z 3 times for each direction 150pF 330 Air ±15KV Contact ±8KV Vibration Test 7 (non-operating) Shock Test 8 (non-operating) Electrostatic Discharge Test 9 (non-operating) 10 times/point 9 points/panel face Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria] In the standard conditions, there is not display function NG issue occurred. (Including line defect, no image) All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 P-511-537(V:2) PD057VT2 15. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19