AZ21001-1A-120A

AZ21001 40 AMP MINIATURE POWER RELAY FEATURES • • • • • • • Quick-connect leads for contacts 1 Form A, B and C contacts available AC and DC coils available Class F high temperature available Epoxy sealed versions available UL, CUR file E44211 TÜV Pending GENERAL DATA CONTACTS Arrangement Ratings SPST (1 Form A, or B) SPDT (1 Form C) Resistive load: Max. switched power: 1100 W or 7200 VA Max. switched current: 40 A (Form A) Max. switched voltage: 300 VAC, 110 VDC UL, CUR NO: 40A at 240 VAC 30A General Purpose 2HP at 250 VAC, 277 VAC NC: 30A at 240 VAC , 30A at 30 VDC 20A General Purpose 11/2 HP at 250 VAC, 277 VAC TÜV NO: 40A at 240 VAC, 14 VDC NC: 30A at 240 VAC, 14 VDC Silver cadmium oxide [1], silver tin oxide [2] < 50 milliohms initially (24 V, 1 A voltage drop method) Life Expectancy Mechanical Electrical Operate Time Release Time Dielectric Strength (at sea level for 1 min.) Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. N.O. 15 msec max. at nominal coil voltage 10 msec max. at nominal coil voltage (without suppression) 1500 Vrms contact to contact 2500 Vrms contact to coil 1000 megohms min. at 20°C, 500 VDC 50% RH DC: > 10% of nominal coil voltage AC: > 30% of nominal coil voltage -55°C -55°C -55°C -55°C (-67°F) (-67°F) (-67°F) (-67°F) to to to to 100°C 130°C 125°C 155°C (212°F) (266°F) (257°F) (311°F) Class Class Class Class B B F F Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Material Resistance 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C., Quick Connects Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Max. Temperature DC: 500 mW AC: 1.4 VA DC: 1.7 W at 20°C AC: 2.7 VA at 20°C Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 30 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 3/10/09 AZ21001 RELAY ORDERING DATA COIL SPECIFICATIONS – DC Coil Nominal Coil VDC 3 5 6 9 12 15 18 24 48 110 Nominal Coil VAC 12 24 120 220 Must Operate VDC 2.25 3.75 4.50 6.75 9.00 10.25 13.5 18.0 36.0 82.50 Must Operate VAC 9 18 90 165 Max. Continuous VDC 3.9 6.5 7.8 11.7 15.6 19.5 23.4 31.2 62.4 143 Max. Continuous VAC 15.6 31.2 156 286 Nominal Current mA ± 10% 300 179 150 100 75 60 50 38 19 8 Nominal Coil Power VA 2.0 2.0 2.0 2.0 Coil Resistance ± 10% 10 28 40 90 160 250 360 640 2,560 13,445 Coil Resistance ± 10% 27 120 3,040 13,490 ORDER NUMBER* AZ21001–1A–3D AZ21001–1A–5D AZ21001–1A–6D AZ21001–1A–9D AZ21001–1A–12D AZ21001–1A–15D AZ21001–1A–18D AZ21001–1A–24D AZ21001-1A–48D AZ21001–1A–110D COIL SPECIFICATIONS – AC Coil 50/60 Hz ORDER NUMBER* AZ21001–1A–12A AZ21001–1A–24A AZ21001–1A–120A AZ21001–1A–240A *Substitute “-1B” or “-1C” in place of “-1A” for 1 Form B or 1 Form C respectively. For silver tin oxide contacts substitute “-1AE” or “-1CE” in place of “-1A” or “1C.” To indicate class F version, add suffix “F”. Substitute “DE” or “AE” in place of “D” or “A” for epoxy sealed version. MECHANICAL DATA Outline Dimensions PC Board Layout 32.4Max. 1.275Max. 8 0.315 27.5Max. 1.083Max. 0.315 32.4 Max. 1.275max. 27.5 Max. 1.083max. 8 0.394 10 17.3 0.681 0.75 0.037 0.150 5.4 0.213 0.75 0.029 6 0.236 0.551 0.020(0.130) 0.043 0.5 (3.3) 28Max. 1.102 M ax. 28Max. 1.102max. 0.1 0.197 5 2- 0.8 0.031 1.2 1.2 0.047 0.047 2-0.8 1.5 0.031 0.059 Wiring Diagram FORM 1A 3 4 FORM 1B 3 5 0.4 0.016 3.3¡ 0 3.3 À.5 0.5 0.130 0.020 0.5 0.020 FORM 1C 3 4 5 2 1 2 1 2 1 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 0.701 7.7 0.303 12.3 0.484 3-0.8 0.031 10 0.394 3-6.35 0.250 0.606 0.303 0.083 3/10/09