AZ2110-1A-70D

AZ2110/AZ2120 40A MINIATURE POWER RELAY FEATURES • • • • • • • • • 40 Amp switching capability 1 Form A, B and C contacts available DC coils to 120 VDC Low cost Life expectancy to 10 million operations High dielectric strength version available Class B insulation standard Class F (155°C) version available Versatility of both PC and “Trace Saver” quick-connect terminals on contacts offered on the AZ2120 version • Proof Tracking Index (PTI/CTI) 175 • UL, CUR file E44211 including versions meeting UL 508 and UL 873 spacing and contact rating requirements; VDE 132710 ÜG (some models) GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (max.) Release Time (max.) Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. (N.O.) Max. 12 ms Typical: 8 ms Max. 5 ms Typical: 3.5 ms 2500 Vrms contact to coil 1500 Vrms between open contacts 1000 megohms min. at 500 VDC, 20°C, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -55°C (-67°F) to 100°C -55°C (-67°F) to 125°C -55°C (-67°F) to 130°C -55°C (-67°F) to 155°C 0.062" DA at 10–55 Hz 20 g P.B.T. polyester Tinned copper alloy, P.C. & quick connects, .250" wide, on top Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. CONTACTS Arrangement Ratings SPDT (1 Form C) SPST (1 Form A and 1 Form B) Resistive load: Max. switched power: 900 W or 10000 VA Max. switched current: 40 A (Form A) 30 A (Form B) Max. switched voltage: 30 VDC or 300 VAC UL Rating: See chart for UL contact ratings. AZ2150 Series meets UL 508 Group A spacing and UL 873 refrigeration and safety control requirements. AZ2151Series meets UL 508 Group B spacing requirements. VDE Rating: AZ2110-1A - 25 A at 250 VAC, 10k cycles, tive AZ2110-1C - 20 A at 250 VAC, 10k cycles, tive Silver cadmium oxide 20 milliohms initially (at rated current, voltage drop method) Dielectric Strength (at sea level for 1min) Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure (optional) Terminals (212°F) (257°F) (266°F) (311°F) Class Class Class Class B F B F resis resis Material Resistance Max. Solder Temp. Max. Solder Time Weight 270°C (518°F) 5 seconds 40 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 500 mW 2.2 W at 20°C (68°F) ambient 1.8 W at 40°C (104°F) ambient 38°C (68°F) at nominal coil voltage - AZ2110 33°C (59°F) at nominal coil voltage - AZ2120 Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Other coil resistances and sensitivities available upon request. Please contact the factory. 4. Specifications subject to change without notice. 11/30/05W AZ2110/AZ2120 RELAY ORDERING DATA STANDARD RELAYS: UL 508: 1/8” Clearance, 1/4” Creepage COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC Max. Continuous VDC Coil Resistance ±10% Must Operate VDC Form A (SPST) Form C (SPDT) 5 6 9 12 15 18 24 48 70 110 7.3 8.9 13.9 17.5 22.5 27.4 36.1 68.4 104.4 163.2 27 40 97 155 256 380 660 2,560 5,500 13,450 3.75 4.5 6.75 9.0 11.25 13.5 18.0 36.0 52.5 82.5 AZ2110–1A–5D AZ2110–1C–5D AZ2110–1A–6D AZ2110–1C–6D AZ2110–1A–9D AZ2110–1C–9D AZ2110–1A–12D AZ2110–1C–12D AZ2110–1A–15D AZ2110–1C–15D AZ2110–1A–18D AZ2110–1C–18D AZ2110–1A–24D AZ2110–1C–24D AZ2110–1A–48D AZ2110–1C–48D AZ2110–1A–70D AZ2110–1C–70D AZ2110–1A–110D AZ2110–1C–110D STANDARD RELAYS: 1/16” Clearance, 1/8” Creepage COIL SPECIFICATIONS 5 6 9 12 15 18 24 48 70 110 7.3 8.9 13.9 17.5 22.5 27.4 36.1 68.4 104.4 163.2 27 40 97 155 256 380 660 2,560 5,500 13,450 3.75 4.5 6.75 9.0 11.25 13.5 18.0 36.0 52.5 82.5 ORDER NUMBER* AZ2111–1A–5D AZ2111–1C–5D AZ2111–1A–6D AZ2111–1C–6D AZ2111–1A–9D AZ2111–1C–9D AZ2111–1A–12D AZ2111–1C–12D AZ2111–1A–15D AZ2111–1C–15D AZ2111–1A–18D AZ2111–1C–18D AZ2111–1A–24D AZ2111–1C–24D AZ2111–1A–48D AZ2111–1C–48D AZ2111–1A–70D AZ2111–1C–70D AZ2111–1A–110D AZ2111–1C–110D * Substitute “1B” in place of the “1A” to indicate 1 Form B contact. To indicate Class F version, add suffix “F”. For quick connect terminals on contacts substitute “2120” or “2121” in place of “2110” or “2111”. UL/CUR File E44211 Approved Contact Ratings Load Type General Purpose (Inductive) Resistive Cycles 100,000 30,000 100,000 100,000 100,000 100,000 6,000 6,000 6,000 30,000 100,000 6,000 100,000 6,000 6,000 30,000 100,000 30,000 100,000 30,000 100,000 Volts 125 or 240 VAC 277 VAC 125 or 240 VAC 30 VDC 277 VAC 240 VAC 250 VAC 277 VAC 125 VAC 125 VAC 125 VAC 240 VAC 277 VAC 125 VAC 240 VAC 125 VAC 125 or 277 VAC 125 VAC 125 VAC 240 VAC 277 VAC Form A (NO) Form B (NC) Form C NO NC 15 A 30 A 15 A 10 A — — — 3A 290 VA — 275 VA 768 VA — 1/4 HP 1 HP — — 33 LRA 10 FLA — — 33 LRA 10 FLA — — 3A 3A — — TV–3 TV–3 Ballast Pilot Duty Motor Load Definite Purpose (LRA-Locked Rotor) (FLA-Full Load) 6,000 125 VAC 6,000 240 VAC 6,000 120 VAC 6,000 240 VAC TV–5 25,000 120 VAC TV–3 25,000 120 VAC Note: See AZ2100 Data Sheet for more complete Tungsten 30 A 15 A 30 A 30 A 30 A 30 A 30 A 15 A 30 A 20 A 10 A 20 A 20 A — — 15 A — — 40 A — 40 A 6A 3A 6A 800 VA 290 VA 800 VA 800 VA — 690 VA 690 VA — 470 VA 1152 VA 768 VA 1152 VA 764 VA — 764 VA 1/4 HP 1 HP 1 HP 3 HP 1 HP 2 HP 1 HP — 1 HP 3/4 HP 3/4 HP — 96 LRA 33 LRA 60 LRA 30 FLA 10 FLA 20 FLA 82.8 LRA — 82.8 LRA 27 FLA — 27 FLA 80 LRA 33 LRA 60 LRA 30 FLA 10 FLA 20 FLA 60 LRA — 60 LRA 20 FLA — 20 FLA 15 A — 15 A 5A — 5A — 3A — — 3A — TV–5 — TV–5 — TV–3 — UL and CUR approved contact ratings. 11/30/05W AZ2110/AZ2120 Maximum Switching Capacity 40 30 NC 20 160 140 160 140 NO Coil Temperature Rise - AZ2110 Coil Temperature Rise - AZ2120 Coil Temperature Rise ˚C Coil Temperature Rise ˚C 120 100 80 120 100 80 10 8 AMPERES 6 5 4 3 2 DC RESISTIVE LOAD AC RESISTIVE LOAD 30A 60 40 20 0 40% 60% 80% 100% 120% 140% 160% 180% 200% 30A 60 40 20 0 40% 60% 80% 100% 120% 140% 160% 180% 200% 25A 20A 15A 0A 25A 20A 15A 0A Percent of Nominal Coil Voltage (at 20˚C) Percent of Nominal Coil Voltage (at 20˚C) 1 10 20 30 40 60 80 100 200 300 VOLTAGE MECHANICAL DATA AZ2110 / AZ2111 .970 (24.65) .618 (15.7) .140 x .010 (3.56 x 0.25) .032 x .062 (0.81 x 1.57) TERMINALS .025 x .005 (0.63 x 0.125) 1.20 (30.5) .025 x .025 (0.63 x 0.63) TERMINALS .045 x .045 (1.14 x 1.14) TERMINALS AZ2120/ AZ2121 .991 x .010 (25.2 x 0.25) .140 x .010 (3.56 x 0.25) .400 (10.2) PC BOARD LAYOUT .081 ± .003 DIA (4 PLC'S) (2.06 ± .076) .300 (7.6) .900 (22.86) 1.00 (25.38) .025 x .005 (0.63 x 0.125) .043 ± .003 (1. 09 ± .076) .150 (3.8) .350 (8.9) .550 (14.0) .700 (17.8) Terminal eliminated on AZ 2110/AZ 2120 Version 1.165 x .010 (29.6 x 0.25) Viewed toward terminals WIRING DIAGRAM AZ2110/2120 VERSION 3 2 4 4 3 2 4 3 2 1 Viewed toward terminals AZ2111/2121 VERSION 4 4 5 62 1 5 62 3 5 6 1 5 1 5 1 5 1 1 FORM A (SPST-NO) 1 FORM B (SPST-NC) 1 FORM C (SPDT) 1 FORM A (SPST-NO) 1 FORM B (SPST-NC) 1 FORM C (SPDT) Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 11/30/05W